Search Results

Search found 8408 results on 337 pages for 'cgi bin'.

Page 232/337 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

  • In virtualbox, I can't access the dvd drive to install a guest host

    - by user211062
    I have installed a fresh copy of Ubuntu Server 12.04 and VirtualBox 4.3. I have set up a VM called "MediaServer" and tried to start it. I then get the following error: Cannot open host device '/dev/sr0' for readonly access. Check the permissions of that device ('/bin/ls -l /dev/sr0'): Most probably you need to be member of the device group. Make sure that you logout/login after changing the group settings of the current user (VERR_ACCESS_DENIED) I have looked all over the Internet and have been unable to find a solution. Using Webmin, I tried changing the group settings so that my user name was in the "vboxusers" group, but that did not work either. I tried various other changes in group settings and none of them worked. Also, I tried rebooting the server after the changes and that didn't work either. I have been following a guide on how to set up an Ubuntu server from the website "linuxhomeserverguide.com" and when it came to the section where you could finally set up your first virtual machine, I am stumped. I would really appreciate it if someone could help me. Thanks in advance.

    Read the article

  • kismet on BCM43227

    - by Uttam Baroi
    I am trying to monitor wireless on Broadcom BCM43227, I used sudo airmon-ng to run the monitoring, i get command not found. I installed kismet, when i run, i get this *uttam@UT:~$ sudo kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. uttam@UT:~$* I did check a blog about kismet on Broadcom that says about some binary drivers not allowing to do it... I used iwconfig and it says no extension : what is that well I need to give a hand on air monitoring............ help, how to do it

    Read the article

  • User Switching in XFCE 12.04 with LightDM and dumping unneeccesary Gnome libs

    - by user111120
    I'm an elder non-techie Mac-to-Linux convert trying to play the linux tech game by ear, so please be gentle! :) I am running XFCE Ubuntu 12.04 totally on a 8-gig flash drive and it's fantastic. I am starting to run into potential space issues (down to 1.0 gig free from 1.9 gigs since being installed last summer), most likely because of growing Thunderbird mail files, and this prompted my question. I just installed lightDM on my system because I want the ability to switch users in XFCE if I follow instructions on another blog. They advised using LightDM instead of GDM because LightDM doesn't download Gnome libraries. That's great since I need the space, but my question is how can I tell whether I don't already have Gnome libraries installed from other updates and such? And can I minimize having any Gnome libraries? The method for me to switch users entails creating a "fast-user-switch" file in /usr/local/bin; is there any easier way? One last thing so I din't have topen another needless thread; while experimenting I somehow lost the share folder in one of my accounts. Is there any way to get a share folder back? Thanks for any tips! Jim in NYC

    Read the article

  • Ubuntu on Samsung NP700Z5B - no Grub

    - by copolii
    I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

    Read the article

  • unable remove/reinstall libxss1:amd

    - by mono
    Whenever I try to install anything (software-center or apt-get) I get an error report stating that libxss1:amd is in a "very bad inconsistent state" (translated from german) and that I should reinstall it. That would not bother me much but I am never sure if the stuff I'm trying will be working in the end. It really resists from being repaired apt-get install, apt-get remove, apt-get -f install, and all the usual suspects - nothing works. It always comes to: dpkg: Fehler beim Bearbeiten von libxss1:amd64 (--configure): Paket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten es nochmal installieren, bevor Sie die Konfiguration versuchen. Fehler traten auf beim Bearbeiten von: libxss1:amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) I posted the error as is, since my translation might not be exact. But I guess you can figure from my text. I found out that this file is the X screen saver. Maybe I should kill it before handling that file. If thats so, than please tell me how. Thanks for your help, thomas

    Read the article

  • Ubuntu won't start - blank screen with flashing white cursor

    - by loomy
    My laptop is dual-booted with Windows 8 on one partition and Ubuntu 12.04.3 on the other. I've searched for my issue already, but nothing I've found so far has solved the problem. Since last week, when I try to boot Ubuntu from GRUB, I am taken to a purple screen (as usual), but then to a black screen with a blinking white _ cursor. I've tried leaving it, but nothing else happens. When I hold Shift and edit the GRUB entry to change 'quiet slash' to 'text', the back screen instead asks for my login and password. When I put them in, it tells me the date of my last logon, and then waits for further commands. Being very very new to Ubuntu, I have no idea at all what to try out at this point. I tried to launch FailsafeX, but while that was beginning, it said "unable to run server /usr/bin/x" No such file or directory", then shortly after returned to the recovery mode menu. Pressing Ctrl+Alt+Delete goes through an Ubuntu loading screen, then the laptop then restarts. Any suggestions will be very appreciated, and apologies if this is a common issue that has been answered a million times before.

    Read the article

  • Couldn't pass the signin screen on ubuntu

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • Init.d script gets return code 1 when calling itself, how can I get output?

    - by Per
    My question is, how can I modify the script so that it will tell me what goes wrong? The scenario is this: I'm trying to get Sonatype Nexus to start as a service in Ubuntu 10.04, and it just will not work. (I'm not looking for help on how to run Nexus, but on how to get some useful output from a script) It works when invoking it with sudo /etc/init.d/nexus start but fails when using sudo service nexus start I have run the update-rc.d command on it, and done everything according to instructions. The nexus init.d-script has a point where it calls itself when it detects that it should run as another user ('nexus'): su -m $RUN_AS_USER -c "\"$REALPATH\" $2" which expands to su -m nexus -c '"/opt/nexus-2.0.2/bin/jsw/linux-x86-64/nexus" start' when adding the -x debug flag to the script. This command results in return code 1. It never executes - I've set -x debug flag on the script, placed echo commands with redirect to file at the start of script to trace, etc. I cannot get any output telling me why the command will not execute. I've tried appending redirect to file after the above script line, inside the quotes, outside, any way I could imagine. All info I can get is by inserting a line echo $? after the su line, which outputs '1'. Is there a way I can see what happens when the su command runs?

    Read the article

  • Samba issue with sharing directories on NTFS/FAT32 (Mounted Drives) ???

    - by Microkernel
    Hi guys, I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two windows-xp machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is = Shared folders on Ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (even if I provide admin login details!!!). I changed workgroup value to the domain_name in office laptop, but still the problem persists... Here is the smdb.conf I am using... [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup Was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail Thanks in advance Regards, Microkernel

    Read the article

  • Kubuntu apt-get -f install error

    - by ShaggyInjun
    I am seeing an error while running apt-get -f install. Can somebody help me out .. venkat@ubuntu:~/Downloads$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 256 not upgraded. 109 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 274641 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2- 0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2- 1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Why am I getting this error while installing gnome?

    - by Sreehari Rajendran
    i have raring ringtail. I installed gnome a couple days ago. I try to install extensions but the site says I don't have the latest version. I type the command sudo apt-get install gnome-shell and I get this error Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 138 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.103ubuntu0.7) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-25-generic cp: cannot stat ‘/module-files.d/libpango1.0-0.modules’: No such file or directory cp: cannot stat ‘/modules/pango-basic-fc.so’: No such file or directory E: /usr/share/initramfs-tools/hooks/plymouth failed with return 1. update-initramfs: failed for /boot/initrd.img-3.8.0-25-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) why?

    Read the article

  • How to remove all associated files and configuration settings of an app installed through 'force architecture' command

    - by Mysterio
    A few weeks ago I installed a 32 bit .deb file through the 'force architecture' command (on my 64bit notebook), however the procedure was unsuccessful and I used the apt-get purgecommand to uninstall the app. It seems there are some leftovers of the app I uninstalled which has now broken system update. Synaptic recommended a sudo apt-get install -fwhich I did in the terminal with this initial response: Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: libntfs10 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: crossplatformui 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? I chose 'Y' then got this response: (Reading database ... 187616 files and directories currently installed.) Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) It seems the app I installed crossplatformuiis still on my system and has caused update manager to stop running with a partial upgrade warning. What do I do now?

    Read the article

  • Installing Django on Windows

    - by Pranav
    Ever needed to install Django in a Microsoft Windows environment, here is a quick start guide to make that happen: Read through the official Django installation documentation, it might just save you a world of hut down the road. Download Python for your version of Windows. Install Python, my preference here is to put it into the Program Files folder under a folder named Python<Version> Add your chosen Python installation path into your Windows path environment variable. This is an optional step, however it allows you to just type python in the command line and have it fire up the Python interpreter. An easy way of adding it is going into Control Panel, System and into the Environment Variables section. Download Django, you can either download a compressed file or if you’re comfortable with using version control – check it out from the Django Subversion repository. Create a folder named django under your <Python installation directory>\Lib\site-packages\ folder. Using my example above that would have been C:\Program Files\Python25\Lib\site-packages\. If you chose to download the compressed file, open it and extract the contents of the django folder into your newly created folder. If you’d prefer to check it out from Subversion, the normal check out points are http://code.djangoproject.com/svn/django/trunk/ for the latest development copy or a named release which you’ll find under http://code.djangoproject.com/svn/django/tags/releases/. Done, you now have a working Django installation on Windows. At this point, it’d be pertinent to confirm that everything is working properly, which you can do by following the first Django tutorial. The tutorial will make mention of django-admin.py, which is a utility which offers some basic functionality to get you off the ground. The file is located in the bin folder under your Django installation directory. When you need to use it, you can either type in the full path to it or simply add that file path into your environment variables as well. Hope this helps!

    Read the article

  • How to create a bootable system with a squashfs root

    - by cldfzn
    My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

    Read the article

  • Uninstall ax88179 package

    - by jackbenny
    I've installed the ax88179 package from the PPA (since the ax88179 driver isn't in the 3.8 kernel). But now I'd like to install kernel 3.11.6 and this module is already included here. So I'd like to uninstall the the module from the package but this fails with the following error message The following packages will be REMOVED: ax88179* 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 313 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 202833 files and directories currently installed.) Removing ax88179 ... Error! There are no instances of module: ax88179_178a 1.6.0 located in the DKMS tree. rm: cannot remove ‘/usr/src/AX88179_178A_LINUX_DRIVER_v1.6.0_SOURCE’: No such file or directory dpkg: error processing ax88179 (--purge): subprocess installed pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already ln: failed to create symbolic link ‘/usr/src/AX88179_178A_LINUX_DRIVER_v1.7.0_SOURCE’: File exists Error! DKMS tree already contains: ax88179_178a-1.7.0 You cannot add the same module/version combo more than once. Module ax88179_178a/1.7.0 already built for kernel 3.8.0-32-generic/4 Module ax88179_178a/1.7.0 already installed on kernel 3.8.0-32-generic/x86_64 Errors were encountered while processing: ax88179 E: Sub-process /usr/bin/dpkg returned an error code (1) It complains about both version 1.6 and 1.7. I've updated to 1.7 a couple of days ago. --force doesn't help either. I just want to get rid of it since when I'm running 3.11.6 the versions interfere with each other.

    Read the article

  • Upgraded from 11.4 to 11.10, There was an error, now the system won't initiialize

    - by Eric
    This morning the system gave me a message that my Version (11.4) was no longer supported, and I took the 'upgrade' option (- 11.10). While installing the various components I encountered a message to the effect that the there was an error and the system may have become unusable. Among the messges: E:Sup-process /usr/bin/dpkg received a segmentation fault...returned an error code (1). I was given an option to do several things, one of which seemed to mean that it would attempt to roll back to the previous version (the default), which I took. After the process ran it said the upgrade process had finished, but there were errors. I attempted to initialize a console so I could enter ubuntu-bug update-manager /var/log/dist-upgrade, per the instructions I received when I received the error message, but the console failed during initialization. I restarted the machine, and the screen has stopped with the following contents: * Starting bluetooth * Stopping save kernel messages * Starting CUPS printing spooler/server * PulseAudio configured per-user sessions saned disabled: edit /etc/default/saned $starting up Cisco VPN daemon *Starting anac(h)ronistic cron *Stopping anac(h)ronistic cron Each of these steps followed by [ OK ] What are my options? Any help appreciated!

    Read the article

  • i18n and L10n (1)

    - by Aaron Li
    Internationalization (i18n) is a way of designing and developing a software product to function in multiple locales. This process involves identifying the locales that must be supported, designing features which support those locales, and writing code that functions equally well in any of the supported locales. Localization (L10n) is a process of modifying or adapting a software product to fit the requirements of a particular locale. This process includes (but may not be limited to) translating the user interface, documentation and packaging, changing dialog box geometries, customizing features (if necessary), and testing the translated product to ensure that it still works (at least as well as the original). i18n is a pre-requisite for L10n. Resource is 1. any part of a program which can appear to the user or be changed or configured by the user. 2. any piece of the program's data, as opposed to its code. Core product is the language independent portion of a software product (as distinct from any particular localized version of that product - including the English language version). Sometimes, however, this term is used to refer to the English product as opposed to other localizations.   Useful links http://www.mozilla.org/docs/refList/i18n/ http://www.w3.org/International/ http://hub.opensolaris.org/bin/view/Community+Group+int_localization/

    Read the article

  • How do I make apt-get instal commands not display every package that is installing?

    - by rajlego
    When I install something on terminal, it often shows me a few things for status. For one, it shows download rate (which is fine). However, when I install something, it can display Unpacking libgranite2:amd64 (0.3.0~r732+pkg64~ubuntu0.3.1) ... Selecting previously unselected package slingshot-launcher. Preparing to unpack .../slingshot-launcher_0.7.6.1+r421+pkg32~ubuntu0.3.1_amd64.deb ... Unpacking slingshot-launcher (0.7.6.1+r421+pkg32~ubuntu0.3.1) ... Selecting previously unselected package contractor. Preparing to unpack .../contractor_0.3.1~r136+pkg22~ubuntu0.3.1_amd64.deb ... Unpacking contractor (0.3.1~r136+pkg22~ubuntu0.3.1) ... Selecting previously unselected package apport-hooks-elementary. Preparing to unpack .../apport-hooks-elementary_0.1-0~35~saucy1_all.deb ... Unpacking apport-hooks-elementary (0.1-0~35~saucy1) ... Processing triggers for hicolor-icon-theme (0.13-1) ... Processing triggers for libglib2.0-0:amd64 (2.40.0-2) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up libgranite-common (0.3.0~r732+pkg64~ubuntu0.3.1) ... Setting up libgranite2:amd64 (0.3.0~r732+pkg64~ubuntu0.3.1) ... Setting up slingshot-launcher (0.7.6.1+r421+pkg32~ubuntu0.3.1) ... Setting up contractor (0.3.1~r136+pkg22~ubuntu0.3.1) ... Setting up apport-hooks-elementary (0.1-0~35~saucy1) ... Processing triggers for libc-bin (2.19-0ubuntu6) .. I would rather that not show up. I only want to see download rate, not all that other stuff. How do I do this? EDIT: I would also like the jargon to be stored somwehre else if something goes wrong, or for the jargon to just be expanable on terminal.

    Read the article

  • How do I prevent software packages from being downloaded until I know it's safe?

    - by Dave M G
    Recently, an update that caused a problem with Gnome session caused me to lose a day's work. The solution was to rollback some packages to a previous version. The update manager is now telling me that my old packages should be updated: ... but I don't want to do that until I know that whatever bug or problem the latest version has is resolved. I understand that with any upgrade that there is a risk of instability. However, in the 8 years or more that I've been on Ubuntu, using the latest releases has been stable enough and with the benefit of the latest features and security. So, I'm not looking for general advice on how to handle upgrades. What I'm saying is that in this one particular instance, the bug introduced by these upgrades is severe and time wasting. But, as an end user, when I encounter a problem like this, I have no idea how to address a specific concern about a specific package. I don't, for example, know which of these packages is the problem, and I can't take time from my work schedule to be experimenting with each package. So, my question is: How do I find out who exactly is responsible for these, or any, packages so that I can contact them and let them know about the problem? How do I freeze these packages only, but allow other upgrades to happen? ubuntu-session gnome-session-common gnome-session-bin gnome-session

    Read the article

  • Cannot get script to run at startup (tried all the simple answers)

    - by Carey Head
    I have Ubuntu Desktop 12.04 LTS running great on an older Acer desktop. I want to use this machine as an in-home server for hosting Minecraft. The command to start the Minecraft server is java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui and that works great when I cd into the correct directory and execute the above. I created a script to do this: #!/bin/bash cd /home/myuser/minecraft-server1 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & cd /home/myuser/minecraft-server2 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & exit 0 I made this .sh file executable, and it too runs great when I start it manually from the terminal. The problem I'm having is getting these to execute at startup. I have my user account on this machine to auto login. I have tried the following: Adding the following to "Startup Applications" : sh /home/myuser/myscript.sh (Nothing happens on reboot) Adding the same to /etc/rc.local (Nothing happens on reboot). I even tested this one by running /etc/rc.local from the terminal, and it executed great. Just not at boot/auto login Added the lines from the script directly to rc.local (Nothing happens on reboot). I can't help but think that there's something I'm missing. The script executes great when run manually, but will not run at boot/auto login. Many thanks in advance.

    Read the article

  • How do I automatically start Clamz with AMZ files for Amazon MP3 downloads?

    - by Takkat
    Chromium can open downloaded files with the default application (e.g. PDF in Evince). In my setup a downloaded .AMZ (for Amazon MP3) always opened with Gedit. However I would like to have all downloaded .amz files to autromatically open with Clamz, a command line tool for downloading that works like a charm. As in Nautilus my .amz files were associated to open with Gedit too I thought it was a good idea to add a clamz.desktop file in ~/.local/share/applications (according to this answer) [Desktop Entry] Encoding=UTF-8 Name=Clamz Comment=Open AMZ files for Amazon MP3 download Exec=/usr/bin/clamz %u Terminal=True Type=Application Icon= Categories=Application; StartupNotify=true MimeType=audio/x-amzxml; NoDisplay=true This lets me choose Clamz as default application in Nautilus. But when opening an .amz file in Nautilus it still does not open with Clamz as expected but is treated as an executable text file instead (note that the executable bit is not set!). Is there any other way to make Chromium or Nautilus always open an .amz file with Clamz? Did I miss to change setting in another place?

    Read the article

  • Distribution upgrade freezes

    - by lugte098
    When upgrading from Ubuntu 10.04 to 10.10 the distribution upgrade program freezes after it notifies me of a change in /etc/apparmor.d/usr.bin.mysqld and asks me to keep the old file or accept the new changes (I accepted them). The terminal says: Configuration file `/etc/apparmor.d/usr.sbin.mysqld' ==> Modified (by you or by a script) since installation. ==> Package distributor has shipped an updated version. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** usr.sbin.mysqld (Y/I/N/O/D/Z) [default=N] ? y Installing new version of config file /etc/apparmor.d/usr.sbin.mysqld ... The program hasn't done anything after this for about 2 hours now and I have no idea what I should do at this point. Can I quit the program and restart it? Or is there another action I should take? It did however change the '/etc/apparmor.d/usr.sbin.mysqld' to the new version, but is still frozen...

    Read the article

  • noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

    - by user170918
    noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

    Read the article

  • How to Downgrade Razor 3 and fix the issue that CSHTML not work in VS10,12 ?

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/how-to-downgrade-razor-3-and-fix-the-issue-that.aspxFew days ago I migrate a project to MVC 4 and suddenly I have seen that MVC project’s cshtml file is no longer working. The problem happen because my project is now based on Razor 3 RC and VS12 doesn’t even have support it. (Remember that VS team will ship support in VS update 4). My migration update it to Razor 3 (which is not related to MVC 4, MVC 4 used old version of Razor 2).   So how to fix the problem. Since VS update 4 in development and MVC 3 support exist in both old Version of VS (10,12) then better to migrate back our Razor to old version so we can use our project in VS 10 or 12. If your project have Razor 3 and it seem that Syntax highlighting doesn’t work for you then I suggest you to try this Nuget package https://www.nuget.org/packages/UpgradeMvc3ToMvc4 Remember that this will not be succeed. What you need to do is delete package folder in your project and now open the packages.config remove all entry of package now.   Now Run this command PM> Install-Package UpgradeMvc3ToMvc4 If this is failed then see what thing make error in console. simply remove the reference and try again. Now run it and see this will work.   After run this you will see that WebGrease Dll have a version number issue. Simply update it to version 1.5.2 and now you have ready your project to run it in .net 4. If you do bin deployment then you don’t need to have installed MVC 4 on server either. Remember that MVC 5 is based on .net 4.5 which simply means you can’t run it in VS10. until VS12 update 4 MVC 5 cshtml page will be work as simple html pages (syntax highlighting and intellisense). Thanks for read my post

    Read the article

  • Ubuntu Dependency Problem in Activity log Manager

    - by Incredible
    incredible@incredible-Inspiron-N5010:~$ sudo apt-get -f install [sudo] password for incredible: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: activity-log-manager The following packages will be upgraded: activity-log-manager 1 upgraded, 0 newly installed, 0 to remove and 287 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.3 kB of archives. After this operation, 29.7 kB disk space will be freed. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of activity-log-manager: activity-log-manager depends on activity-log-manager-common (= 0.9.4-0ubuntu3); however: Version of activity-log-manager-common on system is 0.9.4-0ubuntu3.1. activity-log-manager-control-center (0.9.4-0ubuntu3.1) breaks activity-log-manager (<< 0.9.4-0ubuntu3.1) and is installed. Version of activity-log-manager to be configured is 0.9.4-0ubuntu3. dpkg: error processing activity-log-manager (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: activity-log-manager E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >