Search Results

Search found 22078 results on 884 pages for 'composite primary key'.

Page 232/884 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

  • Output = MAXDOP 1

    - by Dave Ballantyne
    It is widely know that data modifications on table variables do not support parallelism, Peter Larsson has a good example of that here .  Whilst tracking down a performance issue,  I saw that using the OUTPUT clause also causes parallelism to not be used. By way of example,  first lets create two tables with a simple parent and child (one to one) relationship, and then populate them with 100,000 rows. Drop table ParentDrop table Childgocreate table Parent(id integer identity Primary Key,data1 char(255))Create Table Child(id integer Primary Key)goinsert into Parent(data1)Select top 1000000 NULL from sys.columns a cross join sys.columns b insert into ChildSelect id from Parentgo If we then execute update Parent set data1 =''from Parentjoin Child on Parent.Id = Child.Id where Parent.Id %100 =1 and Child.id %100 =1 We should see an execution plan using parallelism such as   However,  if the OUTPUT clause is now used update Parent set data1 =''output inserted.idfrom Parentjoin Child on Parent.Id = Child.Id where Parent.Id %100 =1 and Child.id %100 =1   The execution plan shows that Parallelism was not used Make of that what you will, but i thought that this was a pretty unexpected outcome. Update : Laurence Hoff has mailed me to note that when the OUTPUT results are captured to a temporary table using the INTO clause,  then parallelism is used.  Naturally if you use a table variable then there is still no parallelism  

    Read the article

  • Why a static main method in Java and C#, rather than a constructor?

    - by Konrad Rudolph
    Why did (notably) Java and C# decide to have a static method as their entry point – rather than representing an application instance by an instance of an Application class, with the entry point being an appropriate constructor which, at least to me, seems more natural? I’m interested in a definitive answer from a primary or secondary source, not mere speculations. This has been asked before. Unfortunately, the existing answers are merely begging the question. In particular, the following answers don’t satisfy me, as I deem them incorrect: There would be ambiguity if the constructor were overloaded. – In fact, C# (as well as C and C++) allows different signatures for Main so the same potential ambiguity exists, and is dealt with. A static method means no objects can be instantiated before so order of initialisation is clear. – This is just factually wrong, some objects are instantiated before (e.g. in a static constructor). So they can be invoked by the runtime without having to instantiate a parent object. – This is no answer at all. Just to justify further why I think this is a valid and interesting question: Many frameworks do use classes to represent applications, and constructors as entry points. For instance, the VB.NET application framework uses a dedicated main dialog (and its constructor) as the entry point1. Neither Java nor C# technically need a main method. Well, C# needs one to compile, but Java not even that. And in neither case is it needed for execution. So this doesn’t appear to be a technical restriction. And, as I mentioned in the first paragraph, for a mere convention it seems oddly unfitting with the general design principle of Java and C#. To be clear, there isn’t a specific disadvantage to having a static main method, it’s just distinctly odd, which made me wonder if there was some technical rationale behind it. I’m interested in a definitive answer from a primary or secondary source, not mere speculations. 1 Although there is a callback (Startup) which may intercept this.

    Read the article

  • Small adventure game

    - by Nick Rosencrantz
    I'm making a small adventure game where the player can walk through Dungeons and meet scary characters: The whole thing is 20 java classes and I'm making this a standalone frame while it could very well be an applet I don't want to make another applet since I might want to recode this in C/C++ if the game or game engine turns out a success. The engine is the most interesting part of the game, it controls players and computer-controlled characters such as Zombies, Reptile Warriors, Trolls, Necromancers, and other Persons. These persons can sleep or walk around in the game and also pick up and move things. I didn't add many things so I suppose that is the next thing to do is to add things that can get used now that I already added many different types of walking persons. What do you think I should add and do with things in the game? The things I have so far is: package adventure; /** * The data type for things. Subclasses will be create that takes part of the story */ public class Thing { /** * The name of the Thing. */ public String name; /** * @param name The name of the Thing. */ Thing( String name ) { this.name = name; } } public class Scroll extends Thing { Scroll (String name) { super(name); } } class Key extends Thing { Key (String name) { super(name); } } The key is the way to win the game if you figure our that you should give it to a certain person and the scroll can protect you from necromancers and trolls. If I make this game more Dungeons and Dragons-inspired, do you think will be any good? Any other ideas that you think I could use here? The Threadwhich steps time forward and wakes up persons is called simulation. Do you think I could do something more advanced with this class? package adventure; class Simulation extends Thread { private PriorityQueue Eventqueue; Simulation() { Eventqueue = new PriorityQueue(); start(); } public void wakeMeAfter(Wakeable SleepingObject, double time) { Eventqueue.enqueue(SleepingObject, System.currentTimeMillis()+time); } public void run() { while(true) { try { sleep(5); //Sov i en halv sekund if (Eventqueue.getFirstTime() <= System.currentTimeMillis()) { ((Wakeable)Eventqueue.getFirst()).wakeup(); Eventqueue.dequeue(); } } catch (InterruptedException e ) { } } } } And here is the class that makes up the actual world: package adventure; import java.awt.*; import java.net.URL; /** * Subklass to World that builds up the Dungeon World. */ public class DungeonWorld extends World { /** * * @param a Reference to adventure game. * */ public DungeonWorld(Adventure a) { super ( a ); // Create all places createPlace( "Himlen" ); createPlace( "Stairs3" ); createPlace( "IPLab" ); createPlace( "Dungeon3" ); createPlace( "Stairs5" ); createPlace( "C2M2" ); createPlace( "SANS" ); createPlace( "Macsal" ); createPlace( "Stairs4" ); createPlace( "Dungeon2" ); createPlace( "Datorsalen" ); createPlace( "Dungeon");//, "Ljushallen.gif" ); createPlace( "Cola-automaten", "ColaAutomat.gif" ); createPlace( "Stairs2" ); createPlace( "Fable1" ); createPlace( "Dungeon1" ); createPlace( "Kulverten" ); // Create all connections between places connect( "Stairs3", "Stairs5", "Down", "Up" ); connect( "Dungeon3", "SANS", "Down", "Up" ); connect( "Dungeon3", "IPLab", "West", "East" ); connect( "IPLab", "Stairs3", "West", "East" ); connect( "Stairs5", "Stairs4", "Down", "Up" ); connect( "Macsal", "Stairs5", "South", "Norr" ); connect( "C2M2", "Stairs5", "West", "East" ); connect( "SANS", "C2M2", "West", "East" ); connect( "Stairs4", "Dungeon", "Down", "Up" ); connect( "Datorsalen", "Stairs4", "South", "Noth" ); connect( "Dungeon2", "Stairs4", "West", "East" ); connect( "Dungeon", "Stairs2", "Down", "Up" ); connect( "Dungeon", "Cola-automaten", "South", "North" ); connect( "Stairs2", "Kulverten", "Down", "Up" ); connect( "Stairs2", "Fable1", "East", "West" ); connect( "Fable1", "Dungeon1", "South", "North" ); // Add things // --- Add new things here --- getPlace("Cola-automaten").addThing(new CocaCola("Ljummen cola")); getPlace("Cola-automaten").addThing(new CocaCola("Avslagen Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Iskall Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Cola Light")); getPlace("Cola-automaten").addThing(new CocaCola("Cuba Cola")); getPlace("Stairs4").addThing(new Scroll("Scroll")); getPlace("Dungeon3").addThing(new Key("Key")); Simulation sim = new Simulation(); // Load images to be used as appearance-parameter for persons Image studAppearance = owner.loadPicture( "Person.gif" ); Image asseAppearance = owner.loadPicture( "Asse.gif" ); Image trollAppearance = owner.loadPicture( "Loke.gif" ); Image necromancerAppearance = owner.loadPicture( "Necromancer.gif" ); Image skeletonAppearance = owner.loadPicture( "Reptilewarrior.gif" ); Image reptileAppearance = owner.loadPicture( "Skeleton.gif" ); Image zombieAppearance = owner.loadPicture( "Zombie.gif" ); // --- Add new persons here --- new WalkingPerson(sim, this, "Peter", studAppearance); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "John", studAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Sean", studAppearance ); new WalkingPerson(sim, this, "Reptile", reptileAppearance ); new LabAssistant(sim, this, "Kate", asseAppearance); new LabAssistant(sim, this, "Jenna", asseAppearance); new Troll(sim, this, "Troll", trollAppearance); new Necromancer(sim, this, "Necromancer", necromancerAppearance); } /** * * The place where persons are placed by default * *@return The default place. * */ public Place defaultPlace() { return getPlace( "Datorsalen" ); } private void connect( String p1, String p2, String door1, String door2) { Place place1 = getPlace( p1 ); Place place2 = getPlace( p2 ); place1.addExit( door1, place2 ); place2.addExit( door2, place1 ); } } Thanks

    Read the article

  • Inheritance Mapping Strategies with Entity Framework Code First CTP5: Part 2 – Table per Type (TPT)

    - by mortezam
    In the previous blog post you saw that there are three different approaches to representing an inheritance hierarchy and I explained Table per Hierarchy (TPH) as the default mapping strategy in EF Code First. We argued that the disadvantages of TPH may be too serious for our design since it results in denormalized schemas that can become a major burden in the long run. In today’s blog post we are going to learn about Table per Type (TPT) as another inheritance mapping strategy and we'll see that TPT doesn’t expose us to this problem. Table per Type (TPT)Table per Type is about representing inheritance relationships as relational foreign key associations. Every class/subclass that declares persistent properties—including abstract classes—has its own table. The table for subclasses contains columns only for each noninherited property (each property declared by the subclass itself) along with a primary key that is also a foreign key of the base class table. This approach is shown in the following figure: For example, if an instance of the CreditCard subclass is made persistent, the values of properties declared by the BillingDetail base class are persisted to a new row of the BillingDetails table. Only the values of properties declared by the subclass (i.e. CreditCard) are persisted to a new row of the CreditCards table. The two rows are linked together by their shared primary key value. Later, the subclass instance may be retrieved from the database by joining the subclass table with the base class table. TPT Advantages The primary advantage of this strategy is that the SQL schema is normalized. In addition, schema evolution is straightforward (modifying the base class or adding a new subclass is just a matter of modify/add one table). Integrity constraint definition are also straightforward (note how CardType in CreditCards table is now a non-nullable column). Another much more important advantage is the ability to handle polymorphic associations (a polymorphic association is an association to a base class, hence to all classes in the hierarchy with dynamic resolution of the concrete class at runtime). A polymorphic association to a particular subclass may be represented as a foreign key referencing the table of that particular subclass. Implement TPT in EF Code First We can create a TPT mapping simply by placing Table attribute on the subclasses to specify the mapped table name (Table attribute is a new data annotation and has been added to System.ComponentModel.DataAnnotations namespace in CTP5): public abstract class BillingDetail {     public int BillingDetailId { get; set; }     public string Owner { get; set; }     public string Number { get; set; } } [Table("BankAccounts")] public class BankAccount : BillingDetail {     public string BankName { get; set; }     public string Swift { get; set; } } [Table("CreditCards")] public class CreditCard : BillingDetail {     public int CardType { get; set; }     public string ExpiryMonth { get; set; }     public string ExpiryYear { get; set; } } public class InheritanceMappingContext : DbContext {     public DbSet<BillingDetail> BillingDetails { get; set; } } If you prefer fluent API, then you can create a TPT mapping by using ToTable() method: protected override void OnModelCreating(ModelBuilder modelBuilder) {     modelBuilder.Entity<BankAccount>().ToTable("BankAccounts");     modelBuilder.Entity<CreditCard>().ToTable("CreditCards"); } Generated SQL For QueriesLet’s take an example of a simple non-polymorphic query that returns a list of all the BankAccounts: var query = from b in context.BillingDetails.OfType<BankAccount>() select b; Executing this query (by invoking ToList() method) results in the following SQL statements being sent to the database (on the bottom, you can also see the result of executing the generated query in SQL Server Management Studio): Now, let’s take an example of a very simple polymorphic query that requests all the BillingDetails which includes both BankAccount and CreditCard types: projects some properties out of the base class BillingDetail, without querying for anything from any of the subclasses: var query = from b in context.BillingDetails             select new { b.BillingDetailId, b.Number, b.Owner }; -- var query = from b in context.BillingDetails select b; This LINQ query seems even more simple than the previous one but the resulting SQL query is not as simple as you might expect: -- As you can see, EF Code First relies on an INNER JOIN to detect the existence (or absence) of rows in the subclass tables CreditCards and BankAccounts so it can determine the concrete subclass for a particular row of the BillingDetails table. Also the SQL CASE statements that you see in the beginning of the query is just to ensure columns that are irrelevant for a particular row have NULL values in the returning flattened table. (e.g. BankName for a row that represents a CreditCard type) TPT ConsiderationsEven though this mapping strategy is deceptively simple, the experience shows that performance can be unacceptable for complex class hierarchies because queries always require a join across many tables. In addition, this mapping strategy is more difficult to implement by hand— even ad-hoc reporting is more complex. This is an important consideration if you plan to use handwritten SQL in your application (For ad hoc reporting, database views provide a way to offset the complexity of the TPT strategy. A view may be used to transform the table-per-type model into the much simpler table-per-hierarchy model.) SummaryIn this post we learned about Table per Type as the second inheritance mapping in our series. So far, the strategies we’ve discussed require extra consideration with regard to the SQL schema (e.g. in TPT, foreign keys are needed). This situation changes with the Table per Concrete Type (TPC) that we will discuss in the next post. References ADO.NET team blog Java Persistence with Hibernate book a { text-decoration: none; } a:visited { color: Blue; } .title { padding-bottom: 5px; font-family: Segoe UI; font-size: 11pt; font-weight: bold; padding-top: 15px; } .code, .typeName { font-family: consolas; } .typeName { color: #2b91af; } .padTop5 { padding-top: 5px; } .padTop10 { padding-top: 10px; } p.MsoNormal { margin-top: 0in; margin-right: 0in; margin-bottom: 10.0pt; margin-left: 0in; line-height: 115%; font-size: 11.0pt; font-family: "Calibri" , "sans-serif"; }

    Read the article

  • Connect to running web role on Azure using Remote Desktop Connection and VS2012

    - by Magnus Karlsson
    We want to be able to collect IntelliTrace information from our running app and also use remote desktop to connect to the IIS and look around(probably debugging). 1. Create certificate 1.1 Right-click the cloud project (marked in red) and select “Configure remote desktop”. 1.2 In the drop down list of certificates, choose <create> at the bottom. 1.3. Follow the instructions, you can set it up with default values. 1.4 When done. Choose the certificate and click “Copy to File…” as seen in the left of the picture above. 1.5. Save the file with any name you want. Now we will save it to local storage to be able to import it to our solution through the azure configuration manager in step 3. 2. Save certificate to local storage Now we need to attach it to our local certificate storage to be able to reach it from our confiuguration manager in visual studio. Microsoft provides the following steps for doing this: http://support.microsoft.com/kb/232137 In order to view the Certificates store on the local computer, perform the following steps: Click Start, and then click Run. Type "MMC.EXE" (without the quotation marks) and click OK. Click Console in the new MMC you created, and then click Add/Remove Snap-in. In the new window, click Add. Highlight the Certificates snap-in, and then click Add. Choose the Computer option and click Next. Select Local Computer on the next screen, and then click OK. Click Close , and then click OK. You have now added the Certificates snap-in, which will allow you to work with any certificates in your computer's certificate store. You may want to save this MMC for later use. Now that you have access to the Certificates snap-in, you can import the server certificate into you computer's certificate store by following these steps: Open the Certificates (Local Computer) snap-in and navigate to Personal, and then Certificates. Note: Certificates may not be listed. If it is not, that is because there are no certificates installed. Right-click Certificates (or Personal if that option does not exist.) Choose All Tasks, and then click Import. When the wizard starts, click Next. Browse to the PFX file you created containing your server certificate and private key. Click Next. Enter the password you gave the PFX file when you created it. Be sure the Mark the key as exportable option is selected if you want to be able to export the key pair again from this computer. As an added security measure, you may want to leave this option unchecked to ensure that no one can make a backup of your private key. Click Next, and then choose the Certificate Store you want to save the certificate to. You should select Personal because it is a Web server certificate. If you included the certificates in the certification hierarchy, it will also be added to this store. Click Next. You should see a summary of screen showing what the wizard is about to do. If this information is correct, click Finish. You will now see the server certificate for your Web server in the list of Personal Certificates. It will be denoted by the common name of the server (found in the subject section of the certificate). Now that you have the certificate backup imported into the certificate store, you can enable Internet Information Services 5.0 to use that certificate (and the corresponding private key). To do this, perform the following steps: Open the Internet Services Manager (under Administrative Tools) and navigate to the Web site you want to enable secure communications (SSL/TLS) on. Right-click on the site and click Properties. You should now see the properties screen for the Web site. Click the Directory Security tab. Under the Secure Communications section, click Server Certificate. This will start the Web Site Certificate Wizard. Click Next. Choose the Assign an existing certificate option and click Next. You will now see a screen showing that contents of your computer's personal certificate store. Highlight your Web server certificate (denoted by the common name), and then click Next. You will now see a summary screen showing you all the details about the certificate you are installing. Be sure that this information is correct or you may have problems using SSL or TLS in HTTP communications. Click Next, and then click OK to exit the wizard. You should now have an SSL/TLS-enabled Web server. Be sure to protect your PFX files from any unwanted personnel. Image of a typical MMC.EXE with the certificates up.   3. Import the certificate to you visual studio project. 3.1 Now right click your equivalent to the MvcWebRole1 (as seen in the first picture under the red oval) and choose properties. 3.2 Choose Certificates. Right click the ellipsis to the right of the “thumbprint” and you should be able to select your newly created certificate here. After selecting it- save the file.   4. Upload the certificate to your Azure subscription. 4.1 Go to the azure management portal, click the services menu icon to the left and choose the service. Click Upload in the bottom menu.     5. Connect to server. Since I tried to use account settings(have to use another name) we have to set up a new name for the connection. No biggie. 5.1 Go to azure management portal, select your service and in the bottom menu, choose “REMOTE”. This will display the configuration for remote connection. It will actually change your ServiceConfiguration.cscfg file. After you change It here it might be good to choose download and replace the one in your project. Set a name that is not your windows azure account name and not Administrator. 5.2 Goto visual studio, click Server Explorer. Choose as selected in the picture below and click “COnnect using remote desktop”.   5.2 You will now be able to log in with the name and password set up in step 5.1. and voila! Windows server 2012, IIS and other nice stuff!   To do this one I’ve been using http://msdn.microsoft.com/en-us/library/windowsazure/ff683671.aspx where you can collect some of this information and additional one.

    Read the article

  • Run database checks but omit large tables or filegroups - New option in Ola Hallengren's Scripts

    - by Greg Low
    One of the things I've always wanted in DBCC CHECKDB is the option to omit particular tables from the check. The situation that I often see is that companies with large databases often have only one or two very large tables. They want to run a DBCC CHECKDB on the database to check everything except those couple of tables due to time constraints. I posted a request on the Connect site about time some time ago: https://connect.microsoft.com/SQLServer/feedback/details/611164/dbcc-checkdb-omit-tables-option The workaround from the product team was that you could script out the checks that you did want to carry out, rather than omitting the ones that you didn't. I didn't overly like this as a workaround as clients often had a very large number of objects that they did want to check and only one or two that they didn't. I've always been impressed with the work that our buddy Ola Hallengren has done on his maintenance scripts. He pinged me recently about my old Connect item and said he was going to implement something similar. The good news is that it's available now. Here are some examples he provided of the newly-supported syntax: EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKDB' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'ALL_OBJECTS,-AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'AdventureWorks.PRIMARY' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'ALL_FILEGROUPS,-AdventureWorks.PRIMARY' Note the syntax to omit an object from the list of objects and the option to omit one filegroup. Nice! Thanks Ola! You'll find details here: http://ola.hallengren.com/  

    Read the article

  • Odd Android touch event problem

    - by user22241
    Overview When testing my game I came across a bizarre problem with my touch controls. Note this isn't related to multi-touch as I completely removed my ACTION_POINTER_UP and ACTION_POINTER_DOWN along with my ACTION_MOVE code. So I'm simply working with ACTION_UP and ACTION_DOWN now and still get the problem. The problem I have a left and right button on the left of the screen and a jump button on the right. Everything works as it should but if I touch a large area of my hand (the fleshy part at the base of the thumb for instance) onto the screen, then release it and then press one of my arrows, the sprite moves in that direction for a few seconds, and then ACTION_UP is mysteriously triggered. The sprite stops and then if I release my finger and re-apply it to an arrow, the same thing happens. This goes on and on and eventually (randomly??) stops and everything work OK again. Test device & OS Google Nexus 10 Tablet running Jellybean 4.2.2 Code //Action upon which to switch actionMask = event.getActionMasked(); //Pointer Index of the currently touching pointer pointerIndex = event.getActionIndex(); //Number of pointers (for multi-touch) pointerCount = event.getPointerCount(); //ID of the pointer currently being processed (Multitouch) pointerID = event.getPointerId(pointerIndex); switch (actionMask){ //Primary pointer down case MotionEvent.ACTION_DOWN: { //if pressing left button then set moving left if (isLeftPressed(event.getX(), event.getY())){ renderer.setSpriteLeft(); } //if pressing right button then set moving right else if (isRightPressed(event.getX(), event.getY())){ renderer.setSpriteRight(); } //if pressing jump button then set sprite jumping else if (isJumpPressed(event.getX(),event.getY())){ renderer.setSpriteState('j', true); } break; }//End of case //Primary pointer up case MotionEvent.ACTION_UP:{ //When finger leaves the screen, stop sprite's horizontal movement renderer.setSpriteStopped(); break; }

    Read the article

  • What music player for Ubuntu is *most* like Cog?

    - by mattshepherd
    Cog is, far and away, my favourite music player. File browser on the left panel, pull a folder into the right panel, it plays the files you pull into the main box. Simple! Easy! Nice! Especially since I store all my music on my non-primary drive. Cog doesn't care where I keep my music! It just deals with whatever folder I tell it to monitor. I also have about 200 gigs of music. It's a problem, I know. I can't find a player this simple and elegant in Ubuntu. Amarok: doesn't handle non-primary drives very well. Banshee: kinda good, but fussy browsing/playlist systems. Audacious: no file browser; it also crashes whenever I try to "import" all my music. All I want -- seriously -- is something where I can look at my MP3 folder, drag a folder onto a playlist, and have that playlist play the songs.

    Read the article

  • Cross-Platform Migration using Heterogeneous Data Guard

    - by Roy F. Swonger
    Most people think of Data Guard as a disaster recovery solution, and it certainly excels in that role. However, did you know that you can also use Data Guard for platform migration under some conditions? While you would normally have your primary and standby Data Guard systems running on the same OS and hardware platform, there are some heterogeneous combinations of primary and stanby system that are supported by Data Guard Physical Standby. One example of heterogenous Data Guard support is the ability to go between Linux and Windows on many processor architectures. Another is the support for environments that are running HP-UX on both PA-RIsC and Itanium hardware. Brand new in 11.2.0.2 is the ability to have both SPARC Solaris and IBM AIX on Power Systems in the same Data Guard environment. See My Oracle Support note 413484.1 for all the details about supported platform combinations. So, why mention this in an upgrade blog? Simple: much of the time required for a platform migration is usually spent copying files from one system to another. If you are moving between systems that are supported by heterogenous Data Guard, then you can reduce that migration downtime to a matter of minutes. This can be a big win when downtime is at a premium (and isn't downtime always at a premium? In addition, you get the benefit of being able to keep the old and new environments synchronized until you are sure the migration is successful! A great case study of using Data Guard for a technology refresh is located on this OTN page. The case study showing CERN's methodology isn't highlighted as a link on the overview page, but it is clickable. As always, make sure you are fully versed on the details and restrictions by reading the available documentation and MOS notes. Happy migrating!

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • Why to avoid SELECT * from tables in your Views

    - by Jeff Smith
    -- clean up any messes left over from before: if OBJECT_ID('AllTeams') is not null  drop view AllTeams go if OBJECT_ID('Teams') is not null  drop table Teams go -- sample table: create table Teams (  id int primary key,  City varchar(20),  TeamName varchar(20) ) go -- sample data: insert into Teams (id, City, TeamName ) select 1,'Boston','Red Sox' union all select 2,'New York','Yankees' go create view AllTeams as  select * from Teams go select * from AllTeams --Results: -- --id          City                 TeamName ------------- -------------------- -------------------- --1           Boston               Red Sox --2           New York             Yankees -- Now, add a new column to the Teams table: alter table Teams add League varchar(10) go -- put some data in there: update Teams set League='AL' -- run it again select * from AllTeams --Results: -- --id          City                 TeamName ------------- -------------------- -------------------- --1           Boston               Red Sox --2           New York             Yankees -- Notice that League is not displayed! -- Here's an even worse scenario, when the table gets altered in ways beyond adding columns: drop table Teams go -- recreate table putting the League column before the City: -- (i.e., simulate re-ordering and/or inserting a column) create table Teams (  id int primary key,  League varchar(10),  City varchar(20),  TeamName varchar(20) ) go -- put in some data: insert into Teams (id,League,City,TeamName) select 1,'AL','Boston','Red Sox' union all select 2,'AL','New York','Yankees' -- Now, Select again for our view: select * from AllTeams --Results: -- --id          City       TeamName ------------- ---------- -------------------- --1           AL         Boston --2           AL         New York -- The column labeled "City" in the View is actually the League, and the column labelled TeamName is actually the City! go -- clean up: drop view AllTeams drop table Teams

    Read the article

  • Spring to Java EE, Part Three - new tech article on otn/java

    - by Janice J. Heiss
    In a new article up on otn/java, Java EE expert David Heffelfinger continues his series exploring the relative strengths and weaknesses of Java EE and Spring. Here, he demonstrates how easy it is to develop the data layer of an application using Java EE, JPA, and the NetBeans IDE instead of the Spring Framework.In the first two parts of the series, he generated a complete Java EE application by using JavaServer Faces (JSF) 2.0, Enterprise JavaBeans (EJB) 3.1, and Java Persistence API (JPA) 2.0 from Spring’s Pet Clinic MySQL schema, thus showing how easy it is to develop an application whose functionality equaled that of the Spring sample application.In his new article, Heffelfinger tweaks the application to make it more user friendly.From the article:“The generated application displays primary keys on some of the pages, and these keys are surrogate primary keys—meaning that they have no business value and are used strictly as a unique identifier—so there is no reason why they should be visible to the user. In addition, we will modify some of the generated labels to make them more user-friendly.”He concludes the article with a summary:“The Java EE version of the application is not a straight port of the Spring version. For example, the Java EE version enables us to create, update, and delete veterinarians as well as veterinary specialties, whereas the Spring version of the application enables us only to view veterinarians and specialties. Additionally, the Spring version has a single page for managing/viewing owners, pets, and visits, whereas the Java EE version of the application has separate pages for each of these entities.The other thing we should keep in mind is that we didn’t actually write a lot of the code and markup for the Java EE version of the application, because the bulk of it was generated by the NetBeans wizard.” Have a look at the complete article here.

    Read the article

  • Run database checks but omit large tables or filegroups - New option in Ola Hallengren's Scripts

    - by Greg Low
    One of the things I've always wanted in DBCC CHECKDB is the option to omit particular tables from the check. The situation that I often see is that companies with large databases often have only one or two very large tables. They want to run a DBCC CHECKDB on the database to check everything except those couple of tables due to time constraints. I posted a request on the Connect site about time some time ago: https://connect.microsoft.com/SQLServer/feedback/details/611164/dbcc-checkdb-omit-tables-option The workaround from the product team was that you could script out the checks that you did want to carry out, rather than omitting the ones that you didn't. I didn't overly like this as a workaround as clients often had a very large number of objects that they did want to check and only one or two that they didn't. I've always been impressed with the work that our buddy Ola Hallengren has done on his maintenance scripts. He pinged me recently about my old Connect item and said he was going to implement something similar. The good news is that it's available now. Here are some examples he provided of the newly-supported syntax: EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKDB' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'ALL_OBJECTS,-AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'AdventureWorks.PRIMARY' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'ALL_FILEGROUPS,-AdventureWorks.PRIMARY' Note the syntax to omit an object from the list of objects and the option to omit one filegroup. Nice! Thanks Ola! You'll find details here: http://ola.hallengren.com/  

    Read the article

  • Gnome shell not starting at login, but can start from terminal (Ubuntu 12.04)

    - by Mat Leonard
    I upgraded to Ubuntu 12.04 recently and for some reason it broke Gnome 3. The shell doesn't start up at login. My .xsession-errors looks like this right after I log in: gnome-session[1689]: WARNING: Session 'gnome' runnable check failed: Timed out (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to get edid: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero ** Message: applet now removed from the notification area ** Message: using fallback from indicator to GtkStatusIcon ** Message: moving back from GtkStatusIcon to indicator Then I can run gnome-shell --replace, the shell starts up and everything works. This is what I get immediately after: Window manager warning: Log level 16: Unable to register authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject Window manager warning: Log level 16: Error registering polkit authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject (polkit-error-quark 0) (gnome-shell:2442): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'. Individuals will not be linked properly and creating new links between Personas will not work. The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution Also, if I run /usr/lib/nux/unity_support_test -p, everything comes back as Yes and this checks out: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce 8300 GS/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 It isn't a huge problem since I can get gnome shell to work, but it is a little annoying. So, I'd like to fix this. Thanks for your help.

    Read the article

  • Data Management Business Continuity Planning

    Business Continuity Governance In order to ensure data continuity for an organization, they need to ensure they know how to handle a data or network emergency because all systems have the potential to fail. Data Continuity Checklist: Disaster Recovery Plan/Policy Backups Redundancy Trained Staff Business Continuity Policies In order to protect data in case of any emergency a company needs to put in place a Disaster recovery plan and policies that can be executed by IT staff to ensure the continuity of the existing data and/or limit the amount of data that is not contiguous.  A disaster recovery plan is a comprehensive statement of consistent actions to be taken before, during and after a disaster, according to Geoffrey H. Wold. He also states that the primary objective of disaster recovery planning is to protect the organization in the event that all or parts of its operations and/or computer services are rendered unusable. Furthermore, companies can mandate through policies that IT must maintain redundant hardware in case of any hardware failures and redundant network connectivity incase the primary internet service provider goes down.  Additionally, they can require that all staff be trained in regards to the Disaster recovery policy to ensure that all parties evolved are knowledgeable to execute the recovery plan. Business Continuity Procedures Business continuity procedure vary from organization to origination, however there are standard procedures that most originations should follow. Standard Business Continuity Procedures Backup and Test Backups to ensure that they work Hire knowledgeable and trainable staff  Offer training on new and existing systems Regularly monitor, test, maintain, and upgrade existing system hardware and applications Maintain redundancy regarding all data, and critical business functionality

    Read the article

  • Which Open Source Licenses can address concerns for an Open Source Game Engine?

    - by Chris
    I am on a team that is looking to open source an engine we are building. It's intended as an engine for Online RPG style games. We're writing it to work on both desktops and android platforms. I've been over to the OSI http://opensource.org/licenses/category to check out the most common licenses. However, this will be my first time going into an open source project and I wanted to know if the community had some insight into which licenses might be best suited. Key licensing concerns: Removing or limiting our liability (most already seem to cover this, but stating for completeness). We want other developers to be able to take part or all of our project and use it in their own projects with proper accreditation to our project. Licensing should not hinder someone's ability to quickly use the engine. They should be able to download a release and start using it without needing to wait on licensing issues. Game content (gfx, sound, etc.) that is not part of the engine should be allowed to be licensed separately. If someone is using our engine, they can retain full copy right of their content, including engine generated data. Our primary goal is exposure, which is why we're going open source to start with. Both for the project and for the individuals developing it. Are there any licenses that can require accreditation visible to players? While I'd put our primary goal as exposure, for licensing the accreditation is less of a concern. From what I've read through (and have been able to understand) it doesn't seem like any of the licenses cover anything that is produced by the licensed software. Are there any that state this specifically, or does simply not mentioning it leave it open for other licensing? Are there any other concerns that we should consider? Has anyone had any issues using any of these licenses?

    Read the article

  • One of the partion on a usb harddisk cannot automount

    - by holmescn
    It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

    Read the article

  • Limitations of the SharePoint join using CAML

    - by ybbest
    Limitation One In SharePoint 2010, you can join the primary list to a foreign list and include more than one field from the foreign list. However, the limitation is that the included fields from foreign list have to be the following type: Calculated (treated as plain text) ContentTypeId Counter Currency DateTime Guid Integer Note (one-line only) Number Text The above limitation also explains why you cannot include some types of the fields from the remote list when creating a lookup. Limitation Two When using CAML query to join SharePoint lists, there can be joins to multiple lists, multiple joins to the same list, and chains of joins. However, the limitations are only inner and left outer joins are permitted and the field in the primary list must be a Lookup type field that looks up to the field in the foreign list. Limitation Three The support for writing the JOIN query in CAML is very limited.I have to hand-code the CAML query to join the lists,not fun at all.Although some blogs post mentioned about using LINQ to SharePoint and get the CAML code from there , but I never get it to work.You can check this blog post  for this.Let me know if it works for you. References: http://msdn.microsoft.com/en-us/library/ee535502.aspx http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spquery.joins.aspx

    Read the article

  • How to set up an inter-OS partition?

    - by Confuzzled Persun
    I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

    Read the article

  • Installing Ubuntu along with windows 7 on shrunk partition

    - by Thabo
    I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

    Read the article

  • Philosophy behind the memento pattern

    - by TheSilverBullet
    I have been reading up on memento pattern from various sources of the internet. Differing information from different sources has left me in confusion regarding why this pattern is actually needed. The dofactory implementation says that the primary intention of this pattern is to restore the state of the system. Wiki says that the primary intention is to be able to restore the changes on the system. This gives a different impact - saying that it is possible for a system to have memento implementation with no need to restore. And that ability of restore is a feature of this. OODesign says that It is sometimes necessary to capture the internal state of an object at some point and have the ability to restore the object to that state later in time. Such a case is useful in case of error or failure. So, my question is why exactly do we use this one? Is it to save previous states - or to promote encapsulation between the Caretaker and the Memento? Why is this type of encapsulation so important? Edit: For those visiting, check out this Implementation!

    Read the article

  • alt+tab moves windows between workspaces and crashes unity

    - by Ruslanchik
    I have recently been using multiple workspaces in unity but have run into a bug that is making it very difficult to do this effectively. The problem is with alt+tab. When I am focused on a window that is not in the primary (top-left) workspace one of two things happens: Unity restarts (the launcher and menu bar disappear and screen flashes blank before everything reappears) and all of my windows are moved to different workspaces. The focused window is always moved to the primary workspace and other windows are typically moved one workspace to the left. alt+tab will usually function normally after this. Unity completely crashes. The windows in the current workspace are still there, but the launcher and menu bar are gone, I cannot switch between workspaces, and none of the hotkeys work. The same issues occur when using alt+` as well. I have installed ccsm, but have made only minor adjustments with it. I am still using the Unity switcher. I actually uninstalled ccsm hoping that would resolve the issue, but the issue persists. Is there some resolution to this issue? I like Unity and want to keep using it, but having to use the mouse to switch between programs is irritating and enough reason to switch to Gnome.

    Read the article

  • Standard Network Tiers in a Distributed N-Tier System

    Distributed N-Tier client/server architecture allows for segments of an application to be broken up and distributed across multiple locations on a network.  Listed below are standard tiers in a Distributed N-Tier System. End-User Client Tier The End-User Client is responsible for sending and receiving requests from web servers and other applications servers and translating the responses so that the End-User can interpret the data effectively. The primary roles for this tier are to communicate with servers and translate server responses back to the end-user to interpret. Business-Specific Functions Validate Data Display Data Send Data to Webserver Web Server Tier The Web server tier processes new requests for information coming in from the HTTP and HTTPS ports. This primarily handles the generation of user interfaces and calls the application server when needed to access Data and business logic when needed. Business-specific functions Send Data to application server Format Data for Display Validate Data Application Server Tier The application server stores and executes predefined business logic that is applied to various pieces of data as the business determines. The processed data is then returned back to the Webserver. Additionally, this server directly calls the database to obtain and store any data used by the system Business-Specific Functions Validate Data Process Data Send Data to Database Server Database Server Tier The Database Server is responsible for storing and returning all data need by the calling applications. The primary role for this this server is storage. Data is stored as needed and can be recalled at any point later in time. Business-Specific Functions Insert Data Delete Data Return Data to Application Server

    Read the article

  • Creating floppy drive special devices under Quantal

    - by JCCyC
    First, I'd like for the various special devices for different floppy capacities (like /dev/fd0u720 etc.) to be available. I tried to adapt some udev rules I found online. I tried this, which I saved as /etc/udev/rules.d/70-persistent-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy SUBSYSTEM=="block", KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) SUBSYSTEM=="block", KERNEL=="fd[0-9]*", ACTION=="add", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k" But to no avail. It seems the create_floppy_devices script isn't provided with 12.10. How do I obtain it? Second: I'm using MATE, and whenever I log in I get a message box saying it tried to mount the drive but failed. How do I disable this? Third (which is probably related to the second): Whenever there's a disk in the drive, the motor won't stop spinning. If I do a mdir of it, after it returns, the motor stops, and then starts again. I suspect there's some process in MATE doing this. UPDATE: For CentOS 6 (who does have a create_floppy_devices program) the following rules file worked. Saved as /etc/udev/rules.d/98-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) # drive A: is type 4 (1.44MB) - add other lines for other drives KERNEL=="fd0*", ACTION=="add", RUN+="/lib/udev/create_floppy_devices -c -t 4 -m %M -M 0660 -G floppy $root/%k"

    Read the article

  • How to force Multiple Monitors correct resolutions for LightDM?

    - by Hanynowsky
    I am affected by the BUG: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/874241 Otherwise, if like me you have a laptop connected to a second monitor of higher resolution, LIGHTDM at the login stage, mirrors the displays in both screens and assign to them a common resolution (1024X768) in my case, instead of extending the desktop (Primary screen with the greeter and secondary with just a logo as mentioned in the Multiple Monitors UX specifications book for 12.04). Here is my xrandr -q @L502X:~$ xrandr -q Screen 0: minimum 320 x 200, current 1920 x 1848, maximum 8192 x 8192 LVDS1 connected 1366x768+309+1080 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm 1920x1080 60.0*+ 1600x1200 60.0 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1280x800 59.8 1024x768 60.0 800x600 60.3 56.2 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) I tried to force lightdm to execute some xrandr commands in order to set the right resolution for each monitor and extend the desktop, but I get a LOW GRAPHICS MODE ERROR (You're running in low graphics mode, your screen, input devices...did not get detected..) I created a simple script named lightdmxrand.sh: #!/bin/sh xrandr --output HDMI1 --primary --mode 1920x1080 --output LVDS1 --mode 1366x768 --below HDMI1 And told lightdm to run it : /etc/lightdm/lightdm.conf [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-setup-script=/usr/bin/numlockx on display-setup-script=/home/hanynowsky/lightdmxrandr.sh Someone knows what is wrong!? Thanks in advance.

    Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >