Search Results

Search found 18433 results on 738 pages for 'tfs power tools'.

Page 232/738 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• Graduating soon with a computer science degree, but have unique circumstances [closed]

  - by Donnie

  I joined the Navy in 1998, and was admitted into Nuclear Power Training. I got my electrician's mate certificate, but was put on medical hold when I was in Nuclear Power Training. I was sent to the Naval Hospital, and received a medical (honorable) discharge in the middle of 2000. I decided to stay at home and raise my son, and my girlfriend worked. a few years ago, I decided that I want to work as a programmer, so I went to college and will soon be graduating with a degree in computer science. I hope to finish with a relatively high GPA, 3.8 or 3.9. My question is this: How much, if any, of my Navy experience should I put on my resume? And how do I explain my nine year gap as a stay at home dad? Do I even try to explain it? I know recent college graduates typically have no experience, but obviously I'm not the typical college graduate. Will my long absence from working, or my relatively short duration in the Navy hurt my chances? Should I just put the college on my resume, and hope that HR thinks I'm younger than I am? Obviously, then, my age would show at the interview and there would be questions. Any help is appreciated.

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Can I have a computer with 2 physical HDs, & Dual boot option, one for Windows & one for Ubuntu

  - by Frank

  When my HD failed in my old computer with a dual core, I immediately went out and bought a new 6 core PC because I needed it for business and had to have an immediate solution. The old computer was otherwise a good computer. I don't want to spend a $100+ for a new operating system for the old computer because the Windows 7 Professional opperating system for the new computer will only allow one install. So, I decided to look and see if there were any free operating systems and found Ubuntu. I downloaded it and burned a live CD and would like to try it on the old computer. I found a 200 GB HD I can buy for $30 and the seller will format it any way I want. There are also other HDs available at a similar price. What I was thinking I would like to do is buy 2 HDs. Then I can have one formatted for Ubuntu 12.04 and install Windows XP Pro SP1 on the other HD for which I have the original installation CD. Then I would like to have a dual boot option so that when I power up the computer, I can choose whether to use Windows XP or Ubuntu. Is this possible? If so, how would I do it, that is, arrange it so a dual boot option presents itself on power up.

  Read the article

• Couldn't pass the signin screen on ubuntu

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

• Dim (NEARLY blank) laptop screen, secondary screen works - why?

  - by LIttle Ancient Forest Kami

  My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

  Read the article

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• Cannot establish ssh connection to computer on local network

  - by ovangle

  I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

  Read the article

• How to debug a fatal system crash - [graphical loop DOTA2]?

  - by Huw

  Whilst playing DOTA2, I occasionally and apparently randomly seem to be experiencing a fatal crash where the display freezes fixed and the audio loops over approx the last .5 of a second. Now, I'm interested in resolving this - but my trouble is I don't know where to start. The error appears non-reproducible (I've tried returning to games and deploying the same combination of events in hopes of pinning to to a certain shader etc), and I don't know which part of 'the stack' it might be coming from. Variables that occur to me: I custom build this system, did I do something wrong - is my PSU not providing enough power to the graphics card? I am running Steam and DOTA under Linux, could this new software have a bug Might it be something to do with my ATI Catalyst graphics drivers Is some other background process interfering I'm usually mid game when this occurs, so i quickly kill the power and reboot (when i'm lucky i can get back in with only 1-2 mins lost!). So my question here relates to logs. Where should I start to look or how might I set up logs to help me pin down a fatal crash of this kind by recording moments up to / before a crash and is this likely to be something I should push Steam to do, or is there something at a system level? Then perhaps I can return with a more specific question and perhaps even a bug report :) Many thanks in advance.

  Read the article

• Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

  - by user100987

  When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

  Read the article

• Disable touchpad tap to click on Oneiric ocelot

  - by AWE

  You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

  Read the article

• ALPS touchpad on DELL Inspiron I15RN-3647BK with Ubuntu 11.10 x64

  - by Miguel

  I can't make work the multitouch of the ALPS touchpad in my Dell Inspiron I15RN-3647BK with Ubuntu 11.10 x64, kernel 3.0.0-17-generic... I have tried with this driver but it doesn't work http://people.canonical.com/~sforshee/alps-touchpad/psmouse-alps-0.10/psmouse-alps-dkms_0.10_all.deb. This is the result from the following command: user@laptop:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys That came with or without the alps driver from canonical repository and the touchpad just works like a PS2 generic mouse... Any ideas? Thanks in advance...

  Read the article

• How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

  - by 770

  I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

  Read the article

• Ubuntu Wireless not working on Lenovo t400

  - by VmaxBoss

  This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

  Read the article

• Dell Inspiron7520 and ubntu 12.04 issues

  - by user91358

  I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

  Read the article

• How can I configure the touchpad and keyboard settings on a Dell Inspiron 5110?

  - by Robik

  I am using ubuntu 11.10. I want the following 3 things: I have dell inspiron 5110 laptop. There is button at the top right corner of laptop which can be used for turning the screen off. It works in windows but it does not work in ubuntu 11.10. Even in the manual of the laptop, it the button is supported only in windows. Is there a way to activate it in ubuntu 11.10? Some of the keys like: "break" etc. are missing. Can I use other keys (or combinations of other keys) to function as those missing keys? In the program, "mouse and touchpad", there is no tab for touchpad. I want to enable vertical and horizontal scrolling. How do I do that? The command: xinput list shows Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys Please help!!

  Read the article

• Crackling sound from right laptop speaker

  - by user1880405

  This problem lasts for several months already (first on Ubuntu 13.10, not on 12.04. I get very loud cracking/popping sound from my right Asus K56C's speaker, I searched everything but could not get rid of it. Several facts: There is no problem on Windows 8. It has nothing to do with applications running because it appears even before login screen of Ubuntu. Also same problem if I boot from Live USB. Muting sound will remove noise, but lowering volume has no effect. Inserting any headphones, removes the noise. If I disconnect power cable while there is noise, noise will always disappear, but only if there is no music playing. If I start playing music, noise again appear even with power cable disconnected. Sometimes that noise disappears for 1-4 weeks, and then again appears for no reason and lasts from several days to weeks. That noise is always the same, and I tried adding tsched=0 to /etc/pulse/default.pa. Also tried this PositionReporting fix, with no effect. I also tried disconnecting all the cables and removing all electronic devices around laptop, but it has no effect. I also tried removing Pulse Audio, didn't change anything. Would be great if someone has some real solution for this problem.

  Read the article

• Fusion Middleware 11gR1 : 6??????

  - by Hiroyuki Yoshino

  2010?6??Fusion Middleware 11gR1 ?????????????? ?????????????3??????? 1. Oracle Enterprise Single Sign-On ?????Microsoft Windows (32-bit), Microsoft Windows x64 ???????????????? 10g?????????????????????????????????????Logon Manager?64-bit???????????? ????·????????????????????????·????????Non Oracle LDAP Certification?????????????? 2. Oracle Tuxedo Oracle Tuxedo 11g???????????? 10g???Oracle Tuxedo System and Application Monitor (TSAM), Oracle Service Architecture Leveraging Tuxedo (SALT)??????????? ??????AIX on Power Systems, HP-UX Itanium, Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64, Solaris SPARC (64-bit), Other Platforms ?????????????????????????????????? ????·?????????????????Oracle Tuxedo ? Platform Data Sheets, TSAM ? Supported Platforms, SALT ? Supported Platforms ?????????? 3. Application Adapters ???Mainframe Adapters, CDC Adapters????Application Adapters?11g????????????? JD Edwards, PeopleSoft, SAP, Siebel ??????????????????? ??????AIX on Power Systems, HP-UX Itanium, HP-UX PA-RISC, Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64, Solaris SPARC (64-bit) ??????????????? ??????(??????????????????)????????·????????Adapter Certification?????????????? ????? ????????(Media Pack)??????????????(Media Pack)????????????????? (2010?6??????????????????????)

  Read the article

• Delete Ubuntu and Grub from PC (and BIOS unaccessible)

  - by Temitope

  I've really done a mess while upgrading 12.04 to 12.10, or my PC did, or ubuntu did, I can't really tell. The situation now is I have a dual booting machine, Windows 7 and ubuntu 12.10 -When turning on the PC, I can't access boot options, I've tried every thing, esc, f1 f8, f10 (I have a Hp pavilion) but all I can see is a short-lasting screen with three lines reading something like "error:files not found" or "link not found". So the PC turns to the Grub loader screen. This is already a BIG problem. It means I can't change boot order, and I'm diperate, since it doensn't seem that repairing my operating systems will bring my BIOS back. -If I chose Ubuntu in grup, it loades but then frezes on the desktop, I may be having problem with unity3d, or compiz, which was reported to be crashing the first times I started ubuntu. Now, after turning off and on the pc several times, no crash is reported again. Ubuntu just load my background image and nothing else. Not the side menu, not the header, nothing. Althogh the system seems "functioning", when I press the power button on the PC, for example, the normal shutdown dialog window appears. -If I chose Windows, Grubs tells me that something is not found, and to press any key to continue; I do it and then Windows loads perfectly. What I now want to do is 1- use EasyBSD to change boot order and boot Windows partition first 2- delete the ubuntu partitions from within windows disk manager What I except happening is that My PC turns to, or near to factory booting settings: I press the power button and Windows loads without asking me nothing I have acess to all my hardisk from withing windows Is that what will really happen? Are there danger I'm not seeing? What I don't except happening is The BIOS access key return functioning How could I eventually solve this? I would like to reinstall Ubuntu, 32 bit version this time.

  Read the article

• CodePlex Daily Summary for Saturday, March 13, 2010

  CodePlex Daily Summary for Saturday, March 13, 2010New Projects[Experiment] vczh DBUI: EXPERIMENT. Auto UI adaptor for a specified data base[SAMPLE PROJECT] Branch and Patch with GIT: I'll paste more here later...BlogPress: This web application provides a content management system. Coot: Facebook Photos Screensaver.DotNetNuke® JDMenu: dnnJDMenu makes it easy to use the open source JDMenu component in your DotNetNuke skin.DotNetNuke® RadRotator: dnnRadRotator makes it easy to add telerik RadRotator functionality to your site or custom module. Licensing permits anyone to use the components ...DotNetNuke® RadTabStrip: DNNRadTabStrip makes it easy to add telerik RadTabStrip functionality to your module or skin. Licensing permits anyone to use the components (incl...DotNetNuke® RadTreeView: DNNRadTreeView makes it easy to add telerik RadTreeView functionality to your module or skin. Licensing permits anyone to use the components (incl...DotNetNuke® Skin Garden: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Mark Allan of DnnGarden. Concise and semantic HTML 5 stru...ElmasFC: Elmas Facebook CheckerFront Callback Protocol: Front Callback Protocol make it easier for developers to create a network application in the .Net Language. It provide the flexibility of using TCP...Glass UI: A Windows Forms Control Library built specifically for Aero Glass. This will consist of existing controls, modified to render on glass, as well as ...Guitarist Tools: Some tools for guitarists.HomeUX: HomeUX is home control software featuring a Silverlight-based touch screen user interface.Homework Helper: Homework Helper help students to train simpler homework like "What's the name of the capital of France?" - Question - Answear based. It's made i...IGNOU Mini Project Allocation: A mini project allocation system.Images Compiler: Images Compiler is pretty small wpf application for users who want to resize, rename, disable colors... for too much images in very short time. It...InstitutionManagementSystem: Institution Management System prototypeManagedCv: ManagedCv is the library for C#/VB/ to use the OpenCV librarymanagement joint ownership: Application pour la gestion des actions réalisées au sein d’une copropriété. Application for management actions within a joint ownershipMapWindow6: MapWindow 6.0 is an open source geographic information system (GIS) and library of geospatial software development tools for .NET, written in C#. T...Morris Auto: Morris Auto is a social application build templateMouse control with finger detection: The aim of this project is to design an application for recognition of the movement of a finger through a webcam and then control the mouse. The pr...ORAYLIS BI.Quality: ORAYLIS BI.Quality makes it easier to develop BI Solutions in an agile environment. It adapts Unit Tests to BI Development. Propositional Framework: Different sales propositions are presented to the user using data collected from marketing intelligence, browser history or user behaviour as they ...ServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them ...shatkotha web portal: source code of web portal shatkothaSurvey and Registration tools: Two Silverlight tools for add Survey and Registration in your websiteTable Storage Backup & Restore for Windows Azure: Allows various backup & restore options for Windows Azure Table Storage accounts: - Backup from one storage account to another - Backup a storag...Topsy Lib: This project provides wrapper methods to call Topsy's web services from C#.twNowplaying: twNowplaying is a small and handy utility that allows you to tweet your currently playing track from Spotify to Twitter. Followed by the #twNowplay...XOM: XOM: Xml Object Mapper Automatically populate your objects with data from XML via an XML map. Never do this again: if(e.GetElementsByTagName("us...YS Utils: The library contains set of useful classes which may solve common tasks for different applications.ZabViewer: CS ProjectNew ReleasesAppFabric Caching Admin Tool: AppFabric Caching Admin Tool (0.8): System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Test On:Win 7 (64x)ASP.Net Routing Configuration: mal.Web.Routing v0.9.2.0: mal.Web.Routing v0.9.2.0DotNetNuke IM Module of Facebook Like Messenger: DNN IM Module of Facebook Like Messenger: Empower DNN Website with a 1-to-1 Chat Solution named Free Facebook Messenger Style Web Chat Bar of 123 Web Messenger. 1. If you need to use the c...DotNetNuke® Form and List (formerly User Defined Table): 05.01.02: Form and List 05.01.02 (Release Candidate 2)5.1.2 will be the next stabilzation release. Major Highlights fixed Cancel action in a form, it don't ...DotNetNuke® JDMenu: DNN jdMenu 1.0.0: dnnJDMenu makes it easy to use the open source JDMenu component in your DotNetNuke skin. Many thanks to Jonathan Sharp of Outwest Media for creati...DotNetNuke® RadTabStrip: DNNRadTabstrip 1.0.0: DNNRadTabStrip makes it easy to add telerik RadTabStrip functionality to your module or skin. Licensing permits anyone to use the components (inclu...DotNetNuke® RadTreeView: DNNRadTreeView 1.0.0: DNNRadTreeView makes it easy to create skins which use the Telerik RadTreeview functionality. Licensing permits anyone (including designers) to use...DotNetNuke® Skin Garden: Garden Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Mark Allan of DnnGarden. Concise and semantic HTML 5 struc...ElmasFC: Elmas FC: This porgram is checking your facebook account automaticly.Free DotNetNuke IM of 123 Web Messenger -- Web-based Friend List: Free Download DNN IM Module and Source Code: 123 Web Messenger offers free DotNetNuke Instant Messaging to help you embed a IM Software into DNN Website by integrating 123 Web Messenger with D...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.4 Released: Hi, Today we have released the final version of Visifire v3.0.4 which contains the following major features: * Zooming * Step Line chart ...Home Access Plus+: v3.1.0.0: Version 3.1.0.0 Release Problem with this release, get Version 3.1.1.1 Change Log: Fixed ampersand issue Added Unzip Features Added Help Desk ...Home Access Plus+: v3.1.1.1: Version 3.1.1.1 Release Change Log: Fixed the Help Desk File Changes: ~/App_Data/Tickets.xml ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdbHomework Helper: Homework Helper 1.0: The first release of Homework Helper. It got basic functionality. Check the Documentation or press F1 while using the program.Homework Helper: Homework Helper v1.0: This is the latest version of Homework Helper. Just a few updates since the latest one (a couple of minutes ago). Now it saves your settings! Instr...IBCSharp: IBCSharp 1.02: What IBCSharp 1.02.zip unzips to: http://i39.tinypic.com/28hz8m1.png Note: The above solution has MSTest, Typemock Isolator, and Microsoft CHESS c...InfoService: InfoService v1.5 RC 1: InfoService Release Canidate Please note this is a RC. It should be stable, but i can't guarantee that! So use it on your own risk. Please read Pl...IntX: IntX 0.9.3.3: Fixed issue #7100IronRuby: 1.0 RC3: The IronRuby team is pleased to announce version 1.0 RC3! As IronRuby approaches the final 1.0, these RCs will contain crucial bug fixes and enhanc...MAISGestão: LayerDiagram (pdf): This is the final version of the layer diagramMapWindow6: MapWindow 6.0 msi (March 12): After some significant trouble with svn, this site represents a test of using Mercurial for our version control. Hopefully the choice of this new ...MSBuild Mercurial Tasks: 0.2.0 Beta: This release realises the Scenario 2 and provides two MSBuild tasks: HgCommit and HgPush. This task allows to create a new changeset in the current...NLog - Advanced .NET Logging: NLog 2.0 preview 1: This is very experimental first build of NLog from 2.0 branch is available for download. It’s not alpha, beta or even gamma, just a preview of upco...Open NFe: Fonte DANFE v1.9.5: Código-fonte para a versão 1.9.5 do DANFEOpiConsole (XNA): OpiConsole 0.3: OpiConsole 0.3 OpiConsole includes: * PC & Xbox support. * Default commands (cvar, quit etc.) * Ability to add custom commands. *...ORAYLIS BI.Quality: Release 1.0.0: Release 1.0.0Pcap.Net: Pcap.Net 0.5.0 (38141): Pcap.Net - March 2010 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and include...PhysX.Net: PhysX.Net 0.12.0.0 Beta 1: This is beta release of 0.12.0.0 for people to test and provide feedback on. It targets 2.8.3.21 of PhysXPólya: Pólya 2010 03 13 alpha: Pólya is a collection of generic data structures; as generic as C#/.Net allows them to be. In this first release the focus has been on some fundam...Prolog.NET: Prolog.NET 1.0 Beta 1.3: Installer includes: primary Prolog.NET assembly Prolog.NET Workbench Prolog.NET Scheduler sample application PrologTest console applicatio...Propositional Framework: USP: The initial code drop was based on the Autocomplete demo and the neural network approach used by Jeff Heaton (@ http://www.heatonresearch.com/) - e...Protocol Transition with BizTalk: Source: Stable buildRoTwee: RoTwee (7.1.0.0): Now picture of your friend is shown in RoTwee. Place mouse cursor to the tweet !ServStop: 0.5.0.0: Initial Release Contents of ServStop0500.zip ServStop.exe 0.5.0.0 Initial Release. 32,768 bytes. Other files None. Source code available on "...SkeinLibManaged: Release 1.0.0.0 (Beta): This is the compiled DLL with XML documentation, so there should be plenty of context sensitive help and Intellisense. This is the Release version...sPWadmin: pwAdmin v0.9a: Added: LiveChat Plugin Shows the latest 150 chat messages from "/Your PW Server/logservice/logs/world2.chat" Refresh chat every 5 seconds Allow...sPWadmin: pwAdmin v0.9b: Some minor fixes to style, layout & different browser support Merged the forms in server configuration tab to a single form that can now save mul...Topsy Lib: Initial release: Initial Debug and Release versions.twNowplaying: twNowplaying: Press the Twitter icon to get started, don't forget to submit bugs to the issue tracker. What's new This release has some minor UI fixes.twNowplaying: twNowplaying Alpha 1.0: Press the Twitter icon to get started, don't forget to submit bugs to the issue tracker. Thank you , and enjoy! =)VCC: Latest build, v2.1.30312.0: Automatic drop of latest buildWPF Dialogs: Version 0.1.3: The FolderBrowseDialog / FolderBrowseDialog - Deutsch was improved and extended.XOM: XOM 0.1A: Just a release of the code I have so far. In order to get your objects to work, you need to create an XML file to define your objects. Here is a ...Xpress - ASP.NET MVC 个人博客程序: xpress2.1.1.0312.beta: 最新beta版，注意：此版本和2.1.0不兼容 更改内容： 将主题文件发放在 Views 文件夹下 主题文件支持强类型Model 主题资源文件放在Resouces目录下YS Utils: V 1.0.0.0: This is first release. The YSUtils library contains first set of classes. ZIP files contains documentation.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NET Ajax LibraryASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrN2 CMSBlogEngine.NETFasterflect - A Fast and Simple Reflection APIpatterns & practices – Enterprise LibraryFarseer Physics EngineSharePoint Team-MailerCaliburn: An Application Framework for WPF and SilverlightCalcium: A modular application toolset leveraging PrismjQuery Library for SharePoint Web Services

  Read the article

• CodePlex Daily Summary for Monday, March 01, 2010

  CodePlex Daily Summary for Monday, March 01, 2010New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds S...AWS SimpleDB Browser: A basic GUI browser tool for inspection and querying of a SimpleDB.Desktop Dimmer: A simple application for dimming the desktop around windows, videos, or other media.Disk Defuzzer: Compare chaos of files and folders with customizable SQL queries. This little application scans files in any two folders, generates data in an A...Dynamic Configuration: Dynamic configuration is a (very) small library to provide an API compatible replacement for the System.Configuration.ConfigurationManager class so...Expression Encoder 3 Visual Basic Samples: Visual Basic Sample code that calls the Expression Encoder 3 object model.Extended Character Keyboard: An lightweight onscreen keyboard that allows you to enter special characters like "á" and "û". Also supports adding of 7 custom buttons.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C#...Fluent Assertions: Fluent interface for writing more natural specifying assertions with more clarity than the traditional assertion syntax such as offered by MSTest, ...Foursquare BlogEngine Widget: A Basic Widget for BlogEngine which displays the last foursquare Check-insGraffiti CMS Events Plugin: Plugin for Graffiti CMS that allows creating Event posts and rendering an Event CalendarHeadCounter: HeadCounter is a raid attendance and loot tracking application for World of Warcraft.HRM Core (QL Nhan Su): This is software about Human Resource Management in Viet Nam ------------ Đây là phần mềm Quản lý nhân sự tiền lương ở Việt Nam (Nghiệp vụ ở Việt Nam)IronPython Silverlight Sharpdevelop Template: This IronPython Silverlight SharpDevelop Template makes it easier for you to make Silverlight applications in IronPython with Sharpdevelop.kingbox: my test code for study vs 2005link_attraente: Projeto Conclusão de CursoORMSharp.Net: ORMSharp.Net https://code.google.com/p/ormsharp/ http://www.sqlite.org/ http://sqlite.phxsoftware.com/ http://sourceforge.net/projects/sqlite-dotnet2/Orz framework: Orz framework is more like a helpful library, if you are develop with DotNet framework 3.0, it will be very useful to you. Orz framework encapsul...OTManager: OTManagerSharePoint URL Ping Tool: The Url Ping Tool is a farm feature in SharePoint that provide additional performance and tracing information that can be used to troubleshoot issu...SunShine: SunShine ProjectToolSuite.ValidationExpression: assembly with regular expression for the RegularExpressionValidator controlTwitual Studio: A Visual Studio 2010 based Twitter client. Now you have one less reason for pressing Alt+Tab. Plus you still look like you're working!Velocity Hosting Tool: A program designed to aid a HT Velocity host in hosting and recording tournaments.Watermarker: Adds watermark on pictures to prevent copy. Icon taken from PICOL. Can work with packs of images.Zack's Fiasco - ASP.NET Script Includer: Script includer to * include scripts (JS or CSS) once and only once. * include the correct format by differentiating between release and build. Th...New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for ASP.NET Name ...All-In-One Code Framework (简体中文): All-In-One Code Framework 2010-02-28: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Latest Download Link: http://c...AWS SimpleDB Browser: SimpleDbBrowser.zip Initial Release: The initial release of the SimpleDbBrowser. Unzip the file in the archive and place them all in a folder, then run the .exe. No installer is used...BattLineSvc: V1: First release of BattLineSvcCC.Votd Screen Saver: CC.Votd 1.0.10.301: More bug fixes and minor enhancements. Note: Only download the (Screen Saver) version if you plan to manually install. For most users the (Install...Dynamic Configuration: DynamicConfiguration Release 1: Dynamic Configuration DLL release.eIDPT - Cartão de Cidadão .NET Wrapper: EIDPT VB6 Demo Program: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.eIDPT - Cartão de Cidadão .NET Wrapper: eIDPT VB6 Demo Program Source: Cartão de Cidadão Middleware Application installation (v1.21 or 1.22) is required for proper use of the eID Lib.ESPEHA: Espeha 10: 1. Help available on F1 and via context menu '?' 2. Width of categiries view is preserved througb app starts 3. Drag'nd'drop for tasks view allows ...Extended Character Keyboard: OnscreenSCK Beta V1.0: OnscreenSCK Beta Version 1.0Extended Character Keyboard: OnscreenSCK Beta V1.0 Source: OnscreenSCK Beta Version 1.0 Source CodeFileHasher: Console Version v 0.5: This release provides a very basic and minimal command-line utility for generating and validating file hashes. The supported command-line paramete...Furcadia Framework for Third Party Programs: 0.2.3 Epic Wrench: Warning: Untested on Linux.FurcadiaLib\Net\NetProxy.cs: Fixed a bug I made before update. FurcadiaFramework_Example\Demo\IDemo.cs: Ignore me. F...Graffiti CMS Events Plugin: Version 1.0: Initial Release of Events PluginHeadCounter: HeadCounter 1.2.3 'Razorgore': Added "Raider Post" feature for posting details of a particular raider. Added Default Period option to allow selection of Short, Long or Lifetime...Home Access Plus+: v3.0.0.0: Version 3.0.0.0 Release Change Log: Reconfiguration of the web.config Ability to add additional links to homepage via web.config Ability to add...Home Access Plus+: v3.0.1.0: Version 3.0.1.0 Release Change Log: Fixed problem with moving File Changes: ~/bin/chs extranet.dll ~/bin/chs extranet.pdbHome Access Plus+: v3.0.2.0: Version 3.0.2.0 Release Change Log: Fixed problem with stylesheet File Changes: ~/chs.masterHRM Core (QL Nhan Su): HRMCore_src: Source of HRMCoreIRC4N00bz: IRC4N00bz v1.0.0.2: There wasn't much updated this weekend. I updated 2 'raw' events. One is all raw messages and the other is events that arn't caught in the dll. ...IronPython Silverlight Sharpdevelop Template: Version 1 Template: Just unzip it into the Sharpdevelop python templates folder For example: C:\Program Files\SharpDevelop\3.0\AddIns\AddIns\BackendBindings\PythonBi...MDownloader: MDownloader-0.15.4.56156: Fixed handling exceptions; previous handling could lead to freezing items state; Fixed validating uploading.com links;OTManager: Activity Log: 2010.02.28 >> Thread Reopened 2010.02.28 >> Re-organized WBD Features/WMBD Features 2010.02.28 >> Project status is active againPicasa Downloader: PicasaDownloader (41175): NOTE: The previous release was accidently the same as the one before that (forgot to rebuild the installer). Changelog: Fixed workitem 10296 (Sav...PicNet Html Table Filter: Version 2.0: Testing w/ JQuery 1.3.2Program Scheduler: Program Scheduler 1.1.4: Release Note: *Bug fix : If the log window is docked and user moves the log window , main window will move too. *Added menu to log window to clear...QueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.00: This is the initial release of this module. Remember... This is just a proof of concept to add AJAX functionality to your DotNetNuke modules.Rainweaver Framework: February 2010 Release: Code drop including an Alpha release of the Entity System. See more information in the Documentation page.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.1: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...Team Foundation Server Revision Labeller for CruiseControl.NET: TFS Labeller for CruiseControl.NET - TFS 2008: ReleaseFirst release of the Team Foundation Server Labeller for CruiseControl.NET. This specific version is bound to TFS 2008 DLLs.ToolSuite.ValidationExpression: 01.00.01.000: first release of the time validation class; the assembly file is ready to use, the documentation ist not complete;VCC: Latest build, v2.1.30228.0: Automatic drop of latest buildWatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.7.00: Whats New FileBrowser: Non Admin Users will only see a User Sub folder (..\Portals\0\userfiles\UserName) CKFinder: Non Admin Users will only see ...Watermarker: Watermarker: first public version. can build watermark only in left top corner on one image at once.While You Were Away - WPF Screensaver: Initial Release: This is the code released when the article went live.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrBlogEngine.NETMapWindow GISCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRSLARToolkit - Silverlight Augmented Reality ToolkitDiffPlex - a .NET Diff GeneratorRapid Entity Framework. (ORM). CTP 2jQuery Library for SharePoint Web Services

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >