Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 234/1027 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• Ubuntu 12.04 boot only when USB drive is connected

  - by Ninad Kochkar

  I freshly installed "Ubuntu 12.04" on my Dell Lattitude D830. While I am able to work on it, there is a starange problem while booting my laptop. It doesn't boot unless the USB drive which was used to install it is connected. It looks like the OS is installed on hard drive, but the boot record is in USB. However, I am not sure on this. I am not able to figure out the problem and need your help in this regard.

  Read the article

• After installing ubuntu, all my partitions are gone. Boot-repair log

  - by user211079

  I have an HP Pavilion Sleekbook that came with windows 8 pre-installed. I had trouble dual booting after installing ubuntu, so I disabled safeboot on bios and proceeded to try boot-repair, nothing happened. No dual boot yet. So I tried to reinstall ubuntu, but without the manual partitioning. So I chose to erase ubuntu 13 and reinstall it. Instead it deleted all my HP recovery partitions and windows as well. Here is the log of boot-repair. http://paste.ubuntu.com/6354919/ Gparted and fdisk only show one partition: /dev/sda1 I am wondering if you could suggest any way of recovering my windows partition and have a working windows 8 again? I need some information there with urgency. If you could help me I will be welcome. I am desperated. Thanks

  Read the article

• Understanding IUSR_<machine> account

  - by liho1eye

  Namely how is setting read/write permission for this account different from giving read/write access in the IIS (Windows 2003, so it should be IIS6 if I am not mistaken). Here is the issue: It looks like we had a security sweep and as a part of that IUSR account lost write access everywhere. A whole bunch of legacy ASP sites didn't like that at all... My very surfacish understanding is that it is enough to deny write access in the IIS console to protect a website from someone just dropping random files into it, and IUSR access only has effect on the application scripts running server side, and thus can be safely given write access back. edit: The applications in question obviously require write access to their own web folders, otherwise this wouldn't be an issue at all. Question is how to configure IIS/application to both satisfy security and make them work. My first instinct was to change account which is used to run the app pool. However that is already set to NETWORK_SERVICE, and that guy already has full access to folders in question.

  Read the article

• Cannot boot: "No init found. Try passing init=bootarg"

  - by glutz

  After losing power, my machine rebooted to this error: “error: no init found. Try passing init=bootarg” Per similar threads on this site and others, I've tried booting from a CD and selecting "Try Ubuntu". Then open a terminal and typing: sudo fsck-y /dev/sda1. The response is: Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program? This is on Ubuntu 10.10. Any ideas on what I can try next?

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• PCI function number for SATA AHCI controller

  - by Look Alterno

  I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

  Read the article

• Why does my screen blank out for the duration of the Grub boot menu?

  - by hushs

  Upon booting, when I should see the GRUB menu, my monitor simply says: "No optimum mode. Recommended mode: 1600*1200". If I wait for a short while, Ubuntu starts to boot and it reaches the desktop. So I guess there is no video signal during that time, there's the grub menu but I cant see it and after the wait time everything is fine. I have the same problem when I log out for a short moment, before the log in screen is reached. and this also happens when i shut down ubuntu. The VGA is an onboard NVIDIA GeForce 7025.

  Read the article

• Ubuntu 14.04 get Windows 8 to show up

  - by user270129

  http://paste.ubuntu.com/7271888/ So I installed Ubuntu 14.04 on what used to be Ubuntu 12.04. I am dual booting with Windows 8.1. I haven't been able to access Ubuntu 12.04 since Windows 8.1 did some updates a few weeks back. Grub shows up and I can't see windows 8.1. How can I add Windows 8 using Boot Repair? I figured out how to install boot-repair in Ubuntu 14.04 by doing this workaround: https://bugs.launchpad.net/boot-repair/+bug/1267702 Most important thing: How can I add Windows 8.1 to the Grub menu using Boot Repair? I am not an expert by any means. Thank you.

  Read the article

• MySQL keeps crashing due to bug

  - by mike

  So about a week ago, I finally figured out what was causing my server to continually crash. After reviewing my mysqld.log I keep seeing this same error, 101210 5:04:32 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 Here is a link to the bug report, http://bugs.mysql.com/bug.php?id=35346 someone recommend that you set the max_join_size vaule in my.cnf to 4M, and I did. I assumed this fixed the issue, and it was working for about a week with no issues until today... I checked MySQL and the same error is now back, 101216 06:35:25 mysqld restarted 101216 6:38:15 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 101216 6:38:15 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 101216 06:40:42 mysqld ended Anyone know how I can really fix this issue? I can't keep having mysql crash like this. EDIT: I forgot to mention every time this happens I get an email from linode staying I have a high disk io rate Your Linode, has exceeded the notification threshold (1000) for disk io rate by averaging 2483.68 for the last 2 hours.

  Read the article

• I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

  - by Bong Paduano

  I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

  Read the article

• Can I properly use NS2 on latest Ubuntu 12.04?

  - by Nwe Nwe

  I am a novice user for Ubuntu because I need to work with NS2. NS2 properly work only in Linux, Ubuntu. Now, I wonder if it can properly work on latest version Ubuntu. My current window is Window7. I also want to use Window7. So, which one will be better on parallel booting of Window 7 and Ubuntu or using VMWare on Window7 to install Ubuntu. My RAM is 4G. My processor speed is 1.6G. If I use VMWare, my C drive is only extra 10G. So, does VMWare can work properly in D drive? Please let me know which way is the best for my situation. I hope the advice from anyone. Thanks in advance.

  Read the article

• How to run a command in a process that is not a child of the current process?

  - by amicitas

  I am having a library conflict issue with calling an external program from within a interpreted programming environment (IDL). The issue seems to be that since the program I am calling ends up as a child of IDL, libraries are not being reloaded. From within IDL I can launch sub-processes either directly or using a shell. Is there a good way that I can cause my program to be run without ending up as a child process? The only solution I have found so far is to use ssh localhost my_program. This works perfectly but I would like a more direct solution.

  Read the article

• Multiple network interfaces and UDP packets distribution

  - by Robert Kubrick

  I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

  Read the article

• What special configuration is needed to have a domain controller with DNS on a VM in Hyper-V?

  - by Michael J. Gray

  I have a server running Windows Server 2012 and it only has the Hyper-V role. I have a VM also running Windows Server 2012 and it has the Active Directory: Directory Services and DNS ([example.com]) roles. It has been promoted to a domain controller for [example.com]. In the virtualization host I have joined the domain successfully. On a laptop on the network, it can ping my DNS that is inside the VM on the virtualization host. However, it can't resolve anything through the DNS. I figured it was a firewall issue where the DNS had the firewall allow rule, but the virtualization host did not. I added that, but it didn't fix the issue. On my laptop, I get "UnKnown can't find [example.com]: No response from server" immediately. There's no time out, it just comes back right away. What have I overlooked?

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Cannot open mailbox

  - by AdamL

  Ive got a server running Windows Server 2012 and Exchange 2013 on my local domain. Ive got the mailboxes setup and can send/receive emails fine when using OWA. If i try to open the mailbox using Outlook 2010, I get the below error If i try to expand the folder, i get the same message but am still able to use OWA. When I try to run a send/receive, I get the below error: After a bit of researching on the web, people suggest that the profile is corrupt. I have recreated the profile and tried again but still same error. Another post has suggested that the issue is DNS and client PCs should be able to resolve autodiscover.domain.local and server.domain.local to the IP of the server. This is fine on my network. Every user has got the same issue and I am struggling to identify what is causing the fault. Advise appreciated.

  Read the article

• Wireless (Broadcom) just stopped working after putting machine to sleep!

  - by tommed

  Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

  Read the article

• Reducing the size of the EDB file.

  - by Toby

  I have hit an issue on a MS SBS machine where every morning the datastore for the exchange mailboxes dismounts itself. We believe the issue is that it has grown too large over time and needs cut down a bit. As part of this we have removed (purged) some mail files that were no longer needed, which should have given us a saving of roughly 3GB (more than enough saving for what we need). So I deleted the mailboxes, then purged them and noticed that the .edb file was still reporting the same size, I dismounted and remounted it to see if that would have any effect but it did not. Am I missing a step? I have read online that you can run offline defrag on the file but that seems to only save you a small amount of whitespace. Any help would be greatly appreciated.

  Read the article

• Should I install an AV product on my domain controllers?

  - by mhud

  Should I run a server-specific antivirus, regular antivirus, or no antivirus at all on my servers, particularly my Domain Controllers? Here's some background about why I'm asking this question: I've never questioned that antivirus software should be running on all windows machines, period. Lately I've had some obscure Active Directory related issues that I have tracked down to antivirus software running on our domain controllers. The specific issue was that Symantec Endpoint Protection was running on all domain controllers. Occasionally, our Exchange server triggered a false-positive in Symantec's "Network Threat Protection" on each DC in sequence. After exhausting access to all DCs, Exchange began refusing requests, presumably because it could not communicate with any Global Catalog servers or perform any authentication. Outages would last about ten minutes at a time, and would occur once every few days. It took a long time to isolate the problem because it was not easily reproducible and generally investigation was done after the issue resolved itself.

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• Data transfer from 12.04 to 14.04 using same hostname?

  - by Mark

  I've been using my 12.04 server for a year and a half. I'd like to install 14.04 on a new drive and transfer all my data over once that is complete. I have 720GB of files to to deal with. 12.04 was setup using LVM. I'd like to use the same hostname. I'd prefer a clean install as opposed to an upgrade. What would be the best way go about this? Is it as simple as booting to the new install and mounting the 12.04 VG? I suppose I'd have to manually set up LVM on 14.04 if I want to use the same hostname.

  Read the article

• Ubuntu 12.04 won't boot from USB

  - by user986871

  I downloaded Ubuntu 12.04, then using the tool Startup Disk Creator i made the live usb. I checked that it's bootable Device Boot Start End Blocks Id System /dev/sdb1 * 62 15635593 7817766 c W95 FAT32 (LBA) Now on my lap top it boots nicely, but on two other machines that don't have any installation of ubuntu(no Grub) it doesn't boot. I changed the booting order so that USB is before HDD. So i think i did everything i know, but no luck. How can i use this USB drive on other devices that don't have any previous ubuntu installation.

  Read the article

• Skype audio always goes 'robotic' for the same user

  - by John

  Someone I talk to on Skype a lot has a very persistent issue, where after a few minutes their voice goes very 'robotic'... still understandable but annoying. We can restart the call and it's fine, but fairly consistently after a few minutes it returns. He experiences this with other people too, not just me - I don't have anyone report problems with my audio quality. This is not an ISP issue - he gets the same problem on multiple PCs in different countries, in fact he's even recently moved to a different continent and got a new internet connection... same problem. It seems somehow to be a problem with his Skype account, which is really quite odd. It's been going on for months of not longer.

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >