Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 234/1061 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

  • How much network latency is "typical" for east - west coast USA?

    - by Jeff Atwood
    At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

    Read the article

  • Is there an effective tab manager for Google Chrome?

    - by Mahn
    I've tried a few extensions but I wasn't very satisfied, I'm basically looking for an extension that allows me to group sets of tabs in such a way that I'm able to quickly switch between the groups within the same window. That is to say, if I had 5 Wikipedia tabs and 5 Stack Exchange tabs, ideally I would create 2 groups, hide the tabs of one of them, and switch between the Wikipedia and Stack Exchange tabs back and forth as I need without leaving the same window (note that I'm not specifically looking for grouping by site, that was just a simplified example) Does an extension like this exist? PS: No, I don't actually have 5 Wikipedia tabs open while browsing Stack Exchange sites :-)

    Read the article

  • What are the side-effects of disabling the old Lan Manager hash?

    - by Bigbio2002
    All of the computers in our domain are running Windows XP/Server 2003 and above (with one exception, a Win2Ksp4 server, which is not a domain controller). I intend to disable the LM hashes via group policy as indicated in KB299656, and want to ensure that there won't be any unforseen problems or side-effects. Does anyone have experience with performing this change? Are there any caveats that I should keep in mind?

    Read the article

  • How to monitor changes in the frequency of network latency spikes over time?

    - by dequis
    I'm currently trying to troubleshoot an issue with my network in which I get latency spikes up to 200 seconds (normally around 50 secs) in an apparently random way at apparently random moments of the day. While trying to find what part of my messy network needs to be blamed (outside of the scope of this question - discussed a bit on chat), I realized I have no reliable way to confirm that a change actually improved anything. So far, the main way in which i notice this is that irssi shows [Lag: 15 (??)] in the statusbar, increasing every 5 seconds, and all other connections seem to be affected too. Since this depends on my observations, it's not a very reliable method to know how often it really happens. Note that just sending ICMP pings is probably not enough, but that's just my guess. It might be a "bufferbloat" issue, it might be packet loss, it might only apply to persistent connections. I suspect this because a few months ago, when the issue started, I had a "ping" command running in background and it didn't show anything weird at all during the latency spikes. This seems to have changed now (pings don't go through), but still, I'd prefer something more robust.

    Read the article

  • Printing to a remote printer through the internet

    - by Lock
    I have a remote network (A) that is connected to a head office (B) through a private network. Network A only has 1 PC that requires the connection, and this is into a terminal server at network B. We want to save money by getting rid of the private network as only 1 PC now access it and it seems silly to pay ~$400 per month for something that is accessed by 1 PC. A VPN tunnel is out of the question as the provider wants to charge $600 a month for a VPN tunnel (more than a private network? I might get them to check these numbers). I was thinking of 2 options: 1) VPN client on the PC. This wouldn't cost a thing as we already have VPN users available. 2) Open up a port on the firewall of network B, forwarding to the terminal server. Now the problem is this: On the terminal server, the program that is accessed is for printing labels to the printer that is at network A. The program is setup to send all print jobs to a printer that is setup locally on the terminal server, which has its port mapped to the IP address of the printer that is at network A. If we got rid of the VPN tunnel and used clients/open up firewall port, the printer would no longer be able to find network A, and hence printing would not work. Any ideas to combat this issue? Can the printers at the remote network be setup as internet printers? I've never had any experience with internet printers. Can you open up ports and map to a public static IP address?

    Read the article

  • Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

    - by Dean Hill
    I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

    Read the article

  • What exactly is the difference between update-manager -d and normal apt-get?

    - by jldugger
    The official recommendation of Ubuntu is to use sudo do-release-upgrade to do an online upgrade from one version to the next. Historically many of my Debianite friends and myself have simply altered apt's sources.list and run apt-get dist-upgrade. I follow Ubuntu's recommendations, but I've always wondered what the magic difference between these two processes is. What, exactly, does do-release-upgrade do, on say an upgrade from 9.04 to 9.10? (Examples from other releases welcome.)

    Read the article

  • ifcf-ethx problem

    - by Shahmir Javaid
    Every time i run service networkd restart This is what i get Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up interface eth0: ** (process:12951): WARNING **: fetch_connections_done: error fetching user connections: (2) The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files. Active connection state: activating Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 state: activated Connection activated [ OK ] Here is my ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller DEVICE=eth0 BOOTPROTO=dhcp DEFROUTE=yes DHCPCLASS= HWADDR=xxx IPV4_FAILURE_FATAL=yes IPV6INIT=no ONBOOT=yes OPTIONS=layer2=1 PEERDNS=yes PEERROUTES=yes TYPE=Ethernet UUID=xxx And my ifcfg-eth1 # Intel Corporation 82541PI Gigabit Ethernet Controller DEVICE=eth1 HWADDR=xxx ONBOOT=no And my ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback Any ideas?

    Read the article

  • How to make network drives appear even if disconnected?

    - by Jake
    I have the same problem as many others: network and home drives set by group policy and AD are not connected on windows startup. The prime suspect is that the LAN or wireless does not connect until after user log in. I have already given up on that. Now, I just want the disconnected drives to continue to list in My Computer so that if the user goes in and double click the drive, it will connect again. However, on some machines the drive is completely missing from My Computer. If I right click My Computer Map Network Drive again, it does work. But it's very troublesome to do it all the time. And I don't want to use a script to map the drives because I don't want to appear to be using a hacky solution to the users. The drives listed as disconnected will look more like a "built-in feature", and gives users more confidence. How can I keep the disconnected drives in My Computer? I am using Windows 7 Professional and Win2k8.

    Read the article

  • IIS SMTP unable to relay for domain on local network.

    - by MartinHN
    Hi I have a network with the following servers: EXCH01 - Exchange Server for @domain.com e-mails. TEST-REP01 - Local reporting server. Have IIS SMTP installed and configured. What happens on the TEST-REP01, is that I have a Windows Service that reads reports in a SQL server that is ready for delivery. All reports is sent one at a time, using the local SMTP server. It works perfectly, unless the recipient e-mail address is [email protected] - the domain that the EXCH01 server manages. I get the following error: Mailbox unavailable. The server response was: 5.7.1 Unable to relay for [email protected] What can I do to troubleshoot this further? I can't seem to find useful information in the SMTP log: 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - Relay access on the local IIS (TEST-REP01) are set to allow 127.0.0.1, TEST-REP01 and other servers such as TEST-WEB01. DNS settings on the local network is not domain.com - but companyname-domain.local.

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • How can I determine what is killing my network adapter win7 or vista?

    - by datatoo
    I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

    Read the article

  • How do I access my samba drive through several layers of network topology?

    - by stephenmm
    I have a new windows 7 Home Premium machine that is in a different room than my main computer area. As such I have to use a bridge and another router. Everything is working wonderfully except I cannot access the SAMBA drive with the new machine. I know that SAMBA is accessible as an older WinXP machine can access it. A picture of my network would probably be helpfull: To ISP | | +---------------------------+ | WAN | | Cable Modem | | (2WIRE678) | | | | | +---------------------------+ | +---------------------------+ | | (|) (|) +-----------+ | Belkin Router | | | | Wireless | | (F5D) |--+ +--| WinXP | | | |SAMBA USER | | | +-----------+ +---------------------------+ | | | | +------------+ | | Ubuntu | | | Apache + | | |SAMBA Server| | +------------+ | | +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ # # +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ | +---------------------------+ | | | D-Link Router | | (DI-524) | | | | | +---------------------------+ | | | | +-----------+ | | | Win7 | |SAMBA USER?| +-----------+ More interesting data points: 1. I can ping the SAMBA server from the Win7 machine locally (Ie. 192.168.2.2) 2. I can access the webserver from the Win7 machine locally (Ie. 192.168.2.2) 3. I followed the advice to get Win7 and SAMBA to play nice: http://www.tannerwilliamson.com/2009/09/windows-7-seven-network-file-sharing-fix-samba-smb/ Sorry for being so long winded but it is kind of complex and I am really at a loss as to how to fix it. If any of you have some suggestions I would love to hear it!

    Read the article

  • Wireless very slow on one laptop on network, all other machines normal?

    - by th3dude19
    My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

    Read the article

  • DNS request times out then succeeds on my local network. Why?

    - by Dan
    I have a W2K3 Server that is the Domain Controller and also the DNS server. I wanted to make another DNS zone on my network called "something.local" and then make 'A' records to point requests like 'admin.something.local' and 'www.something.local' to machines on my network. I keep getting DNS timeouts but then after 2 tries it succeeds. Why would this happen? How can I troubleshoot? From my desktop I run: nslookup admin.something.local and get: Server: server.domain.com.au.local Address: 192.168.0.10 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. Name: admin.something.local Address: 192.168.0.191 If I go back the other way: nslookup 192.168.0.191 I get: Server: server.domain.com.au.local Address: 192.168.0.10 Name: admin.something.local Address: 192.168.0.191 My DNS server address is 192.168.0.10. The new DNS zone is not hooked up to active directory. I do not have much experience with DNS. Yesterday it was working fine. I have tried doing an 'ipconfig /flushdns' on both my desktop and the DNS server

    Read the article

  • RTNETLINK answers: File exists... maybe because assigned a new mac adress

    - by steven
    I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

    Read the article

  • Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

    - by Xtend
    Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

    Read the article

  • Internet in the router but not in the local network.

    - by TheMouse
    I have a PC and a laptop (Windows 7 - both) which should connect through router to Internet. The router is Linksys wrt120. My ISP is using PPPoE. I have connected the Internet cable to the router, clone the MAC of my PC, writing the username and the password for my Internet connection. After seconds the router has acquired IP from my ISP. I have used the administration panel of Linksys and with the help of the ping and tracert commands which are built into it - I can connect to the world, outside the network. The problem is when I try to connect the PC or the laptop to the network. There's no problem here. The DHCP server of the router gives them appropriate addresses. The problem is that they couldn't connect to either Internet addresses (google.com) or IP addresses. But they can connect to the router and its control panel. I tried several times, reset the router..but there's no Internet..still.

    Read the article

  • What Windows service binds a NIC to the network?

    - by Bigbio2002
    I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

    Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >