Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 234/361 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

  • WEP key not working on laptop running Ubuntu

    - by stupid-idiot
    I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

    Read the article

  • Using Xbox 360 controller with Mac OS X (specifically turning it off)

    - by Bob King
    So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

    Read the article

  • Windows 7 recognises the wrong router.

    - by Henry
    I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

    Read the article

  • How small is too small (of laptop for a programmer)

    - by defn
    Im thinking of replacing my HP Pavilion dv5-1004nr with Acer Aspire AS5738-6444, I'm a CS student... so im torn between screen size (liking the 15in and decent gpu.. but it weight nearly 8 pounds and battery can barely last 2 hours in power saver mode) and wanting something portable to carry to classes/take notes ect (3 pounds and up to 8 hour battery life of the acer) what would you guys suggest? acer any good? i love my hp keyboard.. (or have links to other good laptops, im aiming for 600$ range?)

    Read the article

  • Lock screen keeps making sound when screen is off

    - by row1
    I have my laptop (Asus UL20FT) on external power and hooked up to an external monitor. I keep the laptop lid closed and am using the 'second screen only' option. If you leave it on the lock screen for a short period of time the screen powers off. While the screen is off it keeps repeating a "duuuh duh duh" sound (sounds just like the device plugged in sound). The monitor is connected via HDMI and I have Microsoft and Logitech wireless USB dongles plugged in. How can I prevent this sound loop?

    Read the article

  • JSF command button attribute is transferred incorrectly

    - by Oleg Rybak
    I have following code in jsf page, backed by jsf managed bean <h:dataTable value="#{poolBean.pools}" var="item"> <h:column> <f:facet name="header"> <h:outputLabel value="Id"/> </f:facet> <h:outputText value="#{item.id}"/> </h:column> <h:column> <f:facet name="header"> <h:outputLabel value="Start Range"/> </f:facet> <h:inputText value="#{item.startRange}" required="true"/> </h:column> <h:column> <f:facet name="header"> <h:outputText value="End Range"/> </f:facet> <h:inputText value="#{item.endRange}" required="true"/> </h:column> <h:column> <f:facet name="header"> <h:outputText value="Pool type"/> </f:facet> <h:selectOneMenu value="#{item.poolType}" required="true"> <f:selectItems value="#{poolBean.poolTypesMenu}"/> </h:selectOneMenu> </h:column> <h:column> <f:facet name="header"/> <h:commandButton id="ModifyPool" actionListener="#{poolBean.updatePool}" image="img/update.gif" title="Modify Pool"> <f:attribute name="pool" value="#{item}"/> </h:commandButton> </h:column> </h:dataTable> This code fragment is dedicated to editing come collection of items. Each row of the table contains "edit" button that submits changed values of the row to the server. It has the item itself as an attribute. Submit is performed by calling actionListener method in the backing managed bean. This code runs correctly on Glassfish v 2.1 But when the server was updated to Glassfish v 2.1.1, the attribute stopped to be passed correctly. Instead of passing edited item (when we change the values in table row, we are actually changing the underlying object fields), the source item is submitted to server, i.e. the item that was previously given to the page. All the changes that were made on the page are discarded. I tried to update jsf version from 1.2_02 to 1.2_14 (we are using jsf RI), but it had no effect. Perhaps anyone came across the same problem? Any help and suggestions will be appreciated.

    Read the article

  • Thin virtual host

    - by Adam Ryczkowski
    My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

    Read the article

  • Reduce the I/O priority of Windows Backup (Windows Server 2008 R2)

    - by HelloSam
    I have a PostgreSQL running on Windows Server 2008 R2 x64 box. And I have scheduled a backup everyday from the RAID 1 DB disk to a dedicated standalone disk. They are SAS 15k on Dell PERC 6i. I am using the built-in Windows Server Backup for purpose. The problem is, whenever the backup process is kicked in, the database performance is hogged. I would say almost a 10x of performance reduction. From the resource monitor, the disk queue is in the double digit range when backing up, and less than 1 during the day. The disk activity is like ~30-50MB/s during backup, so I guess the hardware is acting normally, though wbengine.exe takes up most of the portions. I think reduce the IO priority of the backup process would be an answer, but I couldn't find a way to. Tuning process CPU priority does not seems to help.

    Read the article

  • Postgres error messages in Apache error log

    - by Warren Pena
    I'm running Apache 2.2, PHP 5.2, and Postgres 8.2 on Windows, and I'm seeing something funky in Apache's error.log file. Occasionally, I'll see the message "row number -1 is out of range 0..-1" pop up over and over. Unlike all the other lines in that log file, there's no timestamp or log level. Just that exact string. Googling around, it appears that message is, character for character, a common Postgres error message, but is not an Apache error. I've seen it happen multiple times, and on several different servers. I can't seem to reproduce it, though. I've tried throwing all sorts of error ridden database queries and result set inquiries at Postgres via PHP, and none of them seem to trigger that line being written to the log file. Is it possible for Postgres errors to be ending up in my Apache log file, and if so, how? What would trigger an error message like that? Thanks!

    Read the article

  • Net Screen manager setup

    - by Codezy
    I'm having an issue with our NSMExpress box. I'm trying to manage all our devices, range from ns5gt to ssg320m, and some of those devices have addresses assigned by dhcp from the ISP (like pppoe or dsl). The addresses are actually static but we have the register the MAC address in order to get this address. I can actually add the device in NSM except the IP that's on the untrust side isn't imported in as it's dynamic. Because of this I cannot change many options that pertian to the untrust interface as there is no IP. I've talked to JTAC on this and they didn't know if there was a way to do this or not but then they stated that Tim Hortons does this so I'm confused on how to get this working. Maybe i'm just missing something as I imagine that other people must be doing this as well. Any assistance is appreciated! Furthermore when I import a device this is the message I get: Warnings: Interface ethernet0/0 is a pppoe/dhcp/pppoa client and its ip is NOT IMPORTED because it may be dynamic.

    Read the article

  • Connecting Windows XP to Windows 7 directly using cable

    - by TPR
    These are the problems I am encountering. XP can access Windows 7, not the other way around (which is fine, because I don't need it the other way currently) File transfer is too slow like 0.031 MB/s even though netperf and netCPS list around 8-9 MB/s. I disabled firewall on both computers. Both are same workgroup. I left homegroup on Windows 7. Windows 7 sees the connection as unidentified network. 10.1.1.2 (XP) and 10.1.1.1 (Windows 7) Subnet mask 255.255.255.0 Default gateway and DNS are empty for both of them. Both computer are connected to internet using wireless (using home network), and both of them are connected to each other using wire! If anybody has any pointers, do let me know. I have no problem doing such setup with both computers being Windows 7. This time one of them is XP though, and that seems to be the problem.

    Read the article

  • UNRAID V4.7: Lost write permission on Win7/Android devices

    - by JROC
    I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

    Read the article

  • UNRAID V4.7: Lost write permission on Win7/Android devices

    - by JROC
    I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

    Read the article

  • How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

    - by Dave Gallagher
    I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM [closed]

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • Network keeps disconnecting - Repairing solves it. Router configuration

    - by Joao Carlos
    My network connection keeps going insane, it will keep normal applications connected, like TeamViewer and MSN, but webpages will stop loading (Problem loading page). Everything looks connected and works like a charm, but webpages and new connections wont work. If I press "Repair" in the network connections to restart the adapter, it will work. This happens on WIRED and WIRELESS connections, both on Windows and on MacOSx. I have had this for years (different computers, routers, cities), but I never figured it out. I learn to live with it, but, I think theres probably a solution. What must I be doing wrong if this keeps happening? You guys have same thing?

    Read the article

  • Reputable web based ssh client? [closed]

    - by Doug T.
    I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

    Read the article

  • Can't mount time capsule via wi-fi.

    - by Grnmntn
    I have an Apple time capsule, and have been able to back up to it without a problem for the past few months. However, today I found I cannot connect to the time capsule from Finder, though it appears there, when I click "connect as...", it takes a few seconds and then reports connect failed, "the server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again". When I check Time Machine, it says the last backup failed because "the backup volume could not be mounted". The strange part is, the time capsule is also my router, and I am able to use the time capsule as a wireless access point without a problem. Any ideas?

    Read the article

  • Recover from a corrupted couchbase install

    - by jcolebrand
    We have a couchbase installation on a Windows 2008 R2 server that got corrupted (this was from before my tenure, now I want to clean it up). There is no add-remove entry in the Programs and Features list. There is no active service in services.msc. However, something still thinks Couchbase is installed. Shy of wiping the box (we aren't quite to "redeploy test environment servers at the push of a button" altho I'm working on it), how can I ensure that all remnants of couchbase installs prior are now gone? I believe the previous install was in the Couchbase 2.x range, but it may have been 1.7+ Running the installer again gives "Installer needs to update registry value in order to upgrade from the previous version. Please run installer again to continue."

    Read the article

  • dhcpd won't let go of old leases

    - by Jakobud
    We have DHCP setup to hand out leases in the following range: 192.168.10.190 - 192.168.10.254 (roughly 65 leases) Our small business network only has about 30 computers that use DHCP. We noticed that dhcpd stopped handing out new dynamic leases to the computers, even though there are definitely not 65 computers on the network. Why has it stopped handing out leases? Is it not releasing old un-used leases? How do we tell dhcpd to let go of old leases and start handing out fresh ones again?

    Read the article

  • Thin virtual host [migrated]

    - by Adam Ryczkowski
    My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

    Read the article

  • How to Shrink large Hyper-V VM

    - by autrevo
    Using Disk2VHD utility I converted my bare-metal OS into Hyper-V VHD - http://technet.microsoft.com/en-us/sysinternals/ee656415.aspx And I could obtain a huge 190GB VHD file. Apart from performance issues, this VHD worked fine as guest when hosted on Windows Server 200 R2, Hyper-V. Having realized need to keeping only system files and application installations on VHD. I have deleted most of the junk data from this VHD and now it contains only 20-25 GB. But I am not able to shrink the VHD VM. Having done some research, I came to know, this as a limitation of .VHD files. Subsequently I followed these two step using Edit Virtual Hard Wizard on Windows 2012 Box. Convert from VHD to VHDX (took close to 3 hrs.) Compact (Another 4 hrs.) This did not ever shrink the VHDX either. Does Hyper-V does not provide proper support to handle large VHDs or VHDXs whose size are the range of 200GB.

    Read the article

  • On a router, how do I block wan access for a particular machine without blocking its access to the local network?

    - by HappyEngineer
    On my tp-link TL-WR1043ND router I want to prevent a particular machine from having access to the WAN while still allowing that machine to access other machines on the LAN. My assumption is that I need to do something in the "Access Control" section, however the problem is that it wants an ip range or domain name for the target of the rule. The router uses DHCP to get an address from the WAN, so I don't have any guarantee what the ip address of the wan will be. If the answer is that it's not possible with this router, could someone describe how to do it using OpenWRT instead?

    Read the article

  • Blackjack game reshuffling problem

    - by Jam
    I am trying to make a blackjack game where before each new round, the program checks to make sure that the deck has 7 cards per player. And if it doesn't, the deck clears, repopulates, and reshuffles. I have most of the problem down, but for some reason at the start of every deal it reshuffles the deck more than once, and I can't figure out why. Help, please. Here's what I have so far: (P.S. the imported cards and games modules aren't part of the problem, I'm fairly sure my problem lies in the deal() function of my BJ_Deck class.) import cards, games class BJ_Card(cards.Card): """ A Blackjack Card. """ ACE_VALUE = 1 def get_value(self): if self.is_face_up: value = BJ_Card.RANKS.index(self.rank) + 1 if value > 10: value = 10 else: value = None return value value = property(get_value) class BJ_Deck(cards.Deck): """ A Blackjack Deck. """ def populate(self): for suit in BJ_Card.SUITS: for rank in BJ_Card.RANKS: self.cards.append(BJ_Card(rank, suit)) def deal(self, hands, per_hand=1): for rounds in range(per_hand): for hand in hands: if len(self.cards)>=7*(len(hands)): top_card=self.cards[0] self.give(top_card, hand) else: print "Reshuffling the deck." self.cards=[] self.populate() self.shuffle() top_card=self.cards[0] self.give(top_card, hand) class BJ_Hand(cards.Hand): """ A Blackjack Hand. """ def init(self, name): super(BJ_Hand, self).init() self.name = name def __str__(self): rep = self.name + ":\t" + super(BJ_Hand, self).__str__() if self.total: rep += "(" + str(self.total) + ")" return rep def get_total(self): # if a card in the hand has value of None, then total is None for card in self.cards: if not card.value: return None # add up card values, treat each Ace as 1 total = 0 for card in self.cards: total += card.value # determine if hand contains an Ace contains_ace = False for card in self.cards: if card.value == BJ_Card.ACE_VALUE: contains_ace = True # if hand contains Ace and total is low enough, treat Ace as 11 if contains_ace and total <= 11: # add only 10 since we've already added 1 for the Ace total += 10 return total total = property(get_total) def is_busted(self): return self.total > 21 class BJ_Player(BJ_Hand): """ A Blackjack Player. """ def is_hitting(self): response = games.ask_yes_no("\n" + self.name + ", do you want a hit? (Y/N): ") return response == "y" def bust(self): print self.name, "busts." self.lose() def lose(self): print self.name, "loses." def win(self): print self.name, "wins." def push(self): print self.name, "pushes." class BJ_Dealer(BJ_Hand): """ A Blackjack Dealer. """ def is_hitting(self): return self.total < 17 def bust(self): print self.name, "busts." def flip_first_card(self): first_card = self.cards[0] first_card.flip() class BJ_Game(object): """ A Blackjack Game. """ def init(self, names): self.players = [] for name in names: player = BJ_Player(name) self.players.append(player) self.dealer = BJ_Dealer("Dealer") self.deck = BJ_Deck() self.deck.populate() self.deck.shuffle() def get_still_playing(self): remaining = [] for player in self.players: if not player.is_busted(): remaining.append(player) return remaining # list of players still playing (not busted) this round still_playing = property(get_still_playing) def __additional_cards(self, player): while not player.is_busted() and player.is_hitting(): self.deck.deal([player]) print player if player.is_busted(): player.bust() def play(self): # deal initial 2 cards to everyone self.deck.deal(self.players + [self.dealer], per_hand = 2) self.dealer.flip_first_card() # hide dealer's first card for player in self.players: print player print self.dealer # deal additional cards to players for player in self.players: self.__additional_cards(player) self.dealer.flip_first_card() # reveal dealer's first if not self.still_playing: # since all players have busted, just show the dealer's hand print self.dealer else: # deal additional cards to dealer print self.dealer self.__additional_cards(self.dealer) if self.dealer.is_busted(): # everyone still playing wins for player in self.still_playing: player.win() else: # compare each player still playing to dealer for player in self.still_playing: if player.total > self.dealer.total: player.win() elif player.total < self.dealer.total: player.lose() else: player.push() # remove everyone's cards for player in self.players: player.clear() self.dealer.clear() def main(): print "\t\tWelcome to Blackjack!\n" names = [] number = games.ask_number("How many players? (1 - 7): ", low = 1, high = 8) for i in range(number): name = raw_input("Enter player name: ") names.append(name) print game = BJ_Game(names) again = None while again != "n": game.play() again = games.ask_yes_no("\nDo you want to play again?: ") main() raw_input("\n\nPress the enter key to exit.")

    Read the article

  • windows 7 issues with local domain name

    - by Phill
    Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

    Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >