Search Results

Search found 10324 results on 413 pages for 'move'.

Page 235/413 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

• Setting Krypton Light to Screen Pixels

  - by Adam Jerrett

  So a few days back, I started playing around with Krypton XNA for 2D lighting in my game. I noticed in general, that spawning a light at (0,0) with Krypton causes the light to appear in, pretty much, the centre of the game screen. Is there any way to change this so a Krypton light's "starting point" at [0,0] would spawn at the top left of the screen, and thus follow the standard screen co-ordinates for position? I ask because currently I'm busy working on my game where my spawn point is [512,512]. With hard code, the closest I've got to the light being "central" to this point is the vector position [12,-20], which makes no sense and is impossible to craft, mathematically, if I want the light to move with the camera (the position [480,512] maps roughly to [10,-20]). So, is there any way to "normalise" the krypton lights to use standard screen co-ordinates? If you guys can, play around with the demo from the site and please see if you can find anything out about it. Documentation on the engine is rather scarce, so it's difficult to find anything relevant to my "pixel-perfect" need. It might just also be something in the code with regards to the matrices that I'm not fully understanding. Any help would be useful. Thanks.

  Read the article

• from MS Biology to BS Computer Science [on hold]

  - by Air Borne

  I'm Marco from Italy and I'd like to ask you a piece of advice about my career. I hold a Ms degree in Biology, I enjoyed a lot studying it and I got very good grades but I didn't know what to do with my degree in the real life. Few months ago, I began to read a book about Python programming (Introduction to Computer Science, Zelle J.) and I've great fun learning Python as a beginner, I wake up in the morning thinking about doing excersies and writing simple programs with python :) I'm also watching free lectures from MIT open courseware, and I'm feeling a certain degree of regrets for never asking myself what was computer science, since it seems to me it's a magic world. After weeks of doubts, I made a move :) I applied for a CS bachelor degree abroad, I got an interview and I'm going to start this great adventure next September. I feel incredibly excited at it, but a little bit scared too. Scared because sometimes I think I'm making a great mistake for my life restarting from a bachelor in a completely different area of study. Sometimes I hear people saying the IT market is bad, sometimes I hear other ones saying quite the opposite instead. Moreover, some colleagues of mine suggested me to try to get into Bioinformatics, instead of CS. My question is: I want to really discover if CS is for me, I mean the passion of my life. I know I'm just a beginner and I can't say nothing about it yet. What do you suggest me: CS or Bioinformatics? If I get a Bs in CS, could I get into bioinformatics without relevant experience, taking into account I have a Ms Biology degree? Any comment is appreciated, thanks in advance.

  Read the article

• Unity Dashboard won't find local files, rearrange icons on two computers

  - by Stanton.Sculpture

  Suddenly I can't move icons around my unity launcher and the Dash won't search for my local files and folders. Was working when I first installed 13.10, but now it won't search for local files, and it won't let me rearrange the icons in any way. I've tried turning on and off all the scopes (lenses?) in multiple combinations, but it won't find any files unless I use nautilus to find them its mostly unresponsive. I can't see my recently used files, or files and folders scope at all. Dragging and dropping the icons on the side dock doesn't work, they only stick to my mouse until I put them back where they were. I cannot unlock any icons from the launcher, it just doesn't do anything when I click it. I tried rebooting both of my computers and its still won't function normally. I used ubuntu-bug -w to report a bug, no one has gotten back to me. Is there some option that I changed to cause this? This is a problem on both my laptop and Desktop. Please Help, Alex

  Read the article

• Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• Saving Dragged Dropped items position on postback in asp.net [closed]

  - by Deeptechtons

  Ok i saw many post's on how to serialize the value of dragged items to get hash and they tell how to save them. Now the question is how do i persist the dragged items the next time when user log's in using the has value that i got eg: <ul class="list"> <li id="id_1"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_2"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_3"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_4"> <div class="item ui-corner-all ui-widget"> </div> </li> </ul> which on serialize will give "id[]=1&id[]=2&id[]=3&id[]=4" Now think that i saved it to Sql server database in a single field called SortOrder. Now how do i get the items to these order again ? the code to make these sort is below,without which people didn't know which library i had used to sort and serialize <script type="text/javascript"> $(document).ready(function() { $(".list li").css("cursor", "move"); $(".list").sortable(); }); </script>

  Read the article

• How do I have to take into account the direction in which the camera is facing when creating a first person strafe (left/right) movement

  - by Chris

  This is the code I am currently using, and it works great, except for the strafe always causes the camera to move along the X axis which is not relative to the direction in which the camera is actually facing. As you can see currently only the x location is updated: [delta * -1, 0, 0] How should I take into account the direction in which the camera is facing (I have the camera's target x,y,z) when creating a first person strafe (left/right) movement? case 'a': var eyeOriginal = g_eye; var targetOriginal = g_target; var viewEye = g_math.subVector(g_eye, g_target); var viewTarget = g_math.subVector(g_target, g_eye); viewEye = g_math.addVector([delta * -1, 0, 0], viewEye); viewTarget = g_math.addVector([delta * -1, 0, 0], viewTarget); g_eye = g_math.addVector(viewEye, targetOriginal); g_target = g_math.addVector(viewTarget, eyeOriginal); break; case 'd': var eyeOriginal = g_eye; var targetOriginal = g_target; var viewEye = g_math.subVector(g_eye, g_target); var viewTarget = g_math.subVector(g_target, g_eye); viewEye = g_math.addVector([delta, 0, 0], viewEye); viewTarget = g_math.addVector([delta, 0, 0], viewTarget); g_eye = g_math.addVector(viewEye, targetOriginal); g_target = g_math.addVector(viewTarget, eyeOriginal); break;

  Read the article

• Are there plans for handwriting recognition?

  - by Patrick

  This is a big feature when it comes to putting Ubuntu onto tablets. Currently, Netbook edition works great for that purpose and the pen digitiser is perfect, but the handwriting would be a real dealmaker (especially for my business - we could actually move to Linux) to compete with the Windows one. CellWriter exists, but that only handles character and keyboard input (but I don't know about multitouch on the keyboard). It also needs to handle print and cursive, because character mode can be slow and uncomfortable (unless you're writing passwords). Lastly, CellWriter needs to have some default letter shapes rather than having to be trained from the start. There is a software package called MyScript (by Vision Objects) that handles all four modes (keyboard, character, print, cursive) plus calculator and fullscreen, but it's only free as a trial. Still, it would be nice to see it in the For Purchase section and the trial in the free section of the Software Centre. The only other ones are for Chinese/Japanese/Korean characters. What would really make a difference for us is the integration of some formal API with the OS that can automatically activate when running on a tablet to pass ink data to whatever recognition system is installed, and have something available (however rudimentary) to use it.

  Read the article

• CodePlex Daily Summary for Thursday, October 31, 2013

  CodePlex Daily Summary for Thursday, October 31, 2013Popular ReleasesTCPEssentials: TCPEssentials 1.0.0.1: Changed the name of method SplitArray to Split. Standardization is important...Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.1: v 2.1 Added the 'Should' class instead of the 'Validate' class. The 'Validate' class is now obsolete. Added 'Toolkit.Annotations' to support the Mugen MVVM Toolkit ReSharper plugin. Updated JetBrains annotations within the project. Added the 'GlobalSettings.DefaultActivationPolicy' property to represent the default activation policy. Removed the 'GetSettings' method from the 'ViewModelBase' class. Instead of it, the 'GlobalSettings.DefaultViewModelSettings' property is used. Updated...NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlLayered Architecture Solution Guidance (LASG): LASG 1.0.1.0 for Visual Studio 2012: PRE-REQUISITES Open GAX (Please install Oct 4, 2012 version) Microsoft® System CLR Types for Microsoft® SQL Server® 2012 Microsoft® SQL Server® 2012 Shared Management Objects Microsoft Enterprise Library 6.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This release only works on Visual Studio 2012. Known Issue If you choose the Database project, the solution unfolding time will be slow....DirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...ExtJS based ASP.NET Controls: FineUI v4.0beta1: +2013-10-28 v4.0 beta1 +?????Collapsed???????????????。 -????：window/group_panel.aspx??，???????，???????，?????????。 +??????SelectedNodeIDArray???????????????。 -????：tree/checkbox/tree_checkall.aspx??，?????，?????，????????????。 -??TimerPicker???????（????、????ing）。 -??????????????????????（???）。 -?????????????，??type=text/css（??~`）。 -MsgTarget???MessageTarget，???None。 -FormOffsetRight?????20px??5px。 -?Web.config?PageManager??FormLabelAlign???。 -ToolbarPosition??Left/Right。 -??Web.conf...CODE Framework: 4.0.31028.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.VidCoder: 1.5.10 Beta: Broke out all the encoder-specific passthrough options into their own dropdown. This should make what they do a bit more clear and clean up the codec list a bit. Updated HandBrake core to SVN 5855.Indent Guides for Visual Studio: Indent Guides v14: ImportantThis release has a separate download for Visual Studio 2010. The first link is for VS 2012 and later. Version History Changed in v14 Improved performance when scrolling and editing Fixed potential crash when Resharper is installed Fixed highlight of guides split around pragmas in C++/C# Restored VS 2010 support as a separate download Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.3 (mvc5): version 3.5.3 - support for mvc5 version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 ========================== - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js...Media Companion: Media Companion MC3.585b: IMDB plot scraping Fixed. New* Movie - Rename Folder using Movie Set, option to move ignored articles to end of Movie Set, only for folder renaming. Fixed* Media Companion - Fixed if using profiles, config files would blown up in size due to some settings duplicating. * Ignore Article of An was cutting of last character of movie title. * If Rescraping title, sort title changed depending on 'Move article to end of Sort Title' setting. * Movie - If changing Poster source order, list would beco...MoreTerra (Terraria World Viewer): MoreTerra 1.11.4: Release 1.11.4 =========== = Compatibility = =========== Updated to add the new tiles/walls in 1.2.1Emptycanvas: Emptycanvas v21: Maintenant plusieurs lumières possibles.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.7: This is a bug fix release, containing some important fixes! Fixed issue where Session 0 was not detected correctly, resulting in issues when attempting to display a UI when none was allowed Fixed Installation Prompt and Installation Restart Prompt appearing when deploy mode was non-interactive or silent Fixed issue where defer prompt is displayed after force closing multiple applications Fixed issue executing blocked app execution dialog from UNC path (executed instead from local tempo...BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、２?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????New ProjectsBF4Rcon.NET: BF4Rcon.NET is a .NET library for Battlefield 4's remote server administration interface.Command Processor: Command Processor with "Command Query Responsibility" prencipleDqyt.sk: a solution for sk project.Edit Visual Studio LoadTest Results' Name and Description: A simple addin to Visual Studio 2012 and Visual Studio 2010, which enables a LoadTest user to be able to give custom name and description for their loadtest.Grauers Set Metadata Properties: Use this to automatically set ISSUE, APPROVED BY and APPROVED DATEIkeCode WP7.1+ Toolkit: IkeCode WP7.1+ Toolkit is an initiative to create methods that facilitate the development of application.MongoDAO: MongoDB C#NB_Store Payment On Delivery Gateway: NB_Store Payment On Delivery Gateway allows you to add "Paymeny On Delivery" to your NB_Store webshop on DNN.occupie: // to doOffice and PDF API for .NET Components: As an independent .NET component, Spire.Office doesn't need Microsoft Office to be installed on System. It supports C# word, C# Excel and C# PDF.SharePoint Workflow Manager | Bulk Start or Terminate workflows: SharePoint Workflow Manager allows you bulk start or terminate SharePoint workflows on all items in a list.System App: The System App is a sleek, smart and open-source IT mapping and monitoring tool by Zalando.TCPEssentials: TCPEssentials is a C# Library that helps simplify the task of managing TCP connections, and also gives you a few tools that may be useful.Wangls: ???WindowSMART: WindowSMART 2013 and Home Server SMART 2013 are powerful hard disk and SSD health monitoring, reporting and alerting tools for Windows.

  Read the article

• Physics not synchronizing correctly over the network when using Bullet

  - by Lucas

  I'm trying to implement a client/server physics system using Bullet however I'm having problems getting things to sync up. I've implemented a custom motion state which reads and write the transform from my game objects and it works locally but I've tried two different approaches for networked games: Dynamic objects on the client that are also on the server (eg not random debris and other unimportant stuff) are made kinematic. This works correctly but the objects don't move very smoothly Objects are dynamic on both but after each message from the server that the object has moved I set the linear and angular velocity to the values from the server and call btRigidBody::proceedToTransform with the transform on the server. I also call btCollisionObject::activate(true); to force the object to update. My intent with method 2 was to basically do method 1 but hijacking Bullet to do a poor-man's prediction instead of doing my own to smooth out method 1, but this doesn't seem to work (for reasons that are not 100% clear to me even stepping through Bullet) and the objects sometimes end up in different places. Am I heading in the right direction? Bullet seems to have it's own interpolation code built-in. Can that help me make method 1 work better? Or is my method 2 code not working because I am accidentally stomping that?

  Read the article

• The Oracle Platform

  - by Naresh Persaud

  Today’s enterprises typically create identity management infrastructures using ad-hoc, multiple point solutions. Relying on point solutions introduces complexity and high cost of ownership leading many organizations to rethink this approach. In a recent worldwide study of 160 companies conducted by Aberdeen Research, there was a discernible shift in this trend as businesses are now looking to move away from the point solution approach from multiple vendors and adopt an integrated platform approach. By deploying a comprehensive identity and access management strategy using a single platform, companies are saving as much as 48% in IT costs, while reducing audit deficiencies by nearly 35%. According to Aberdeen's research, choosing an integrated suite or “platform” of solutions for Identity Management from a single vendor can have many advantages over choosing “point solutions” from multiple vendors. The Oracle Identity Management Platform is uniquely designed to offer several compelling benefits to our customers.  Shared Services: Instead of separate solutions for - Administration, Authentication, Authorization, Audit and so on–  Oracle Identity Management offers a set of share services that allows these services to be consumed by each component in the stack and by developers of new applications  Actionable Intelligence: The most compelling benefit of the Oracle platform is ” Actionable intelligence” which means if there is a compliance violation, the same platform can fix it. And If a user is logging in from an un-trusted device or we detect an attack and act proactively on that information. Suite Interoperability: With the oracle platform the components all connect and integrated with each other. So if an organization purchase the platform for provisioning and wants to manage access, then the same platform can offer access management which leads to cost savings. Extensible and Configurable: With point solutions – you typically get limited ability to extend the tool to address custom requirements. But with the Oracle platform all of the components have a common way to extend the UI and behavior Find out more about the Oracle Platform approach in this presentation. Platform approach-series-the oracleplatform-final View more PowerPoint from OracleIDM

  Read the article

• any online service and/or application to develop a story line for an adventure game?

  - by Gajet

  I with a bunch of friend were talking about an adventure game. there will be too many possibilities in the game and the player can pick from wide varity of choices at each stage to do somthing. there will be consequences for each decision and they may or may not end the story. the result would be somthing like (picture from flashforward series S01E17)or if any of you watched hereos season 1 there is also similar time lines represented as strings in isaac mandez workshop. sorry for bad quality examples but right now I can't think of any better one. do you know any website or application which we can use to create the timeline? these features the least required ones: the ability to represent events as boxes. the ability to connect distant events to each other. the ability to move events on a scene freely the ability to expand the scene easily there should be some color options for the lines representing connections between events easily shareing the idea with one another it's much more better to have a WYSIWYG editor easily explore in the large scene of events in the end if you know any application which could let me create a board just like the one in my sample picture and share it whith other freinds it could help us a lot.

  Read the article

• Set up Work Manager Shutdown Trigger in WebLogic Server 10.3.4 Using WLST

  - by adejuanc

  WebLogic Server's Work Managers provide a way to control work and allocated threads. You can set different scheduling guidelines for different applications, depending on your requirements. There is a default self-tuning Work Manager, but you might want to set up a custom work manager in some circumstances: for example, when you want the server to prioritize one application over another when a response time goal is required, or when a minimum thread constraint is needed to avoid deadlock. The Work Manager Shutdown Trigger is a tool to help with stuck threads in which will do the following: Shut down the Work Manager. Move the application to Admin State (not active). Change the Server instance health state to failed. Example of a Shutdown Trigger set on the config.xml for your domain: <work-manager>   <name>stuckthread_workmanager</name>   <work-manager-shutdown-trigger>     <max-stuck-thread-time>30</max-stuck-thread-time>     <stuck-thread-count>2</stuck-thread-count>   </work-manager-shutdown-trigger> </work-manager> Understand that any misconfiguration on the Work Manager can lead to poor performance on the server. Any changes must be done and tested before going to production. How can one create a WorkManagerShutdownTrigger for WLS 10.3.4 using WLST? You should be able to create a WorkManagerShutdownTrigger using WLST by following these steps: edit() startEdit() cd('/SelfTuning/mydomain/WorkManagers') create('myWM','WorkManager') cd('myWM/WorkManagerShutdownTrigger') create('myWMst','WorkManagerShutdownTrigger') cd('myWMst') ls()

  Read the article

• Is there an alternative to SDL 1.3 for a C++ game that should run on iOS and Android?

  - by futlib

  I've used SDL for many desktop games, always as the cross-platform glue for: Creating a window Processing input Rendering images Rendering fonts Playing sounds/music It has never disappointed me at those tasks. But when it comes to graphics, I prefer to work with the OpenGL API directly, even though all of our games are 2D. In the project I'm currently working on, I've made sure to only use the API subset supported by both OpenGL 1.3 and OpenGL 1.0, so making the thing run on Android should be easy, I thought. Turns out there is no official Android or iOS port of SDL yet. However, there's one in SDL 1.3, which is still in development. SDL 1.3 doesn't seem very appealing to me for three reasons: It's been in development for at least 4 years, and I have no idea when it will be done, not to mention stable. It's not ported to as many platforms as SDL 1.2. From what I've seen, it uses OpenGL for drawing, so I suppose the community will move away from directly using OpenGL. So I'm wondering if I should use a different library for our current project - it doesn't matter much if I need to port my existing code from SDL 1.2 to SDL 1.3 or to some other library. We're planning to release on Windows, Mac OS X, Linux, iOS and Android, so good support for these platforms is essential. Is there anything stable that does what I want?

  Read the article

• Algorithm for detecting windows in a room

  - by user2733436

  I am dealing with the following problem and i was looking to write a Pseudo-code for developing an algorithm that can be generic for such a problem. Here is what i have come up with thus far. STEP 1 In this step i try to get the robot where it maybe placed to the top left corner. Turn Left - If no window or Wall detected keep going forward 1 unit.. if window or wall detected -Turn right -- if no window or Wall detected keep going forward.. if window or wall detected then top left corner is reached. STEP 2 (We start counting windows after we get to this stage to avoid miscounting) I would like to declare a variable called turns as it will help me keep track if robot has gone around entire room. Turns = 4; Now we are facing north and placed on top left corner. while(turns0){ If window or wall detected (if window count++) Turn Right Turn--; While(detection!=wall || detection!=window){ move 1 unit forward Turn left (if window count++) Turn right } } I believe in doing so the robot will go around the entire room and count windows and it will stop once it has gone around the entire room as the turns get decremented. I don't feel this is the best solution and would appreciate suggestions on how i can improve my Pseudo-code. I am not looking for any code just a algorithm on solving such a problem and that is why i have not posted this in stack overflow. I apologize if my Pseudo-code is poorly written please make suggestions if i can improve that as i am new to this. Thanks.

  Read the article

• Social Retailing

  - by David Dorf

  For retailers the move to mobile has been obvious.  More and more consumers are interacting with retailers, both online and in the store, using their mobile devices.  Retailers are quick to invest in both consumer facing mobile apps as well as ones to equip employees.  But when I talk to retailers about social, the value isn't as clear-cut.  Intuitively, retailers know that better relationships with customers will result in higher sales, but the trip to get there has many paths. The interesting thing about social media is that it has the potential to permeate all parts of the business.  Obviously it works well for marketing, but it also has a place with recruiting, knowledge management, trend analysis, and employee collaboration.  Information gathered from social media can enhance existing processes like assortment planning, product development, space planning, promotion planning, and replenishment.  Letting the customer influence each of these areas helps align the experience. One of the things holding retailers back is the lack of consistent and integrated tools to manage social media and make sense of the huge amounts of data.  To that end Oracle has been aggressively acquiring in the space, as depicted in the infographic below.  Soon, social will get the same level of investment as mobile. The Social CRM Arms Race: A Timeline - An infographic by the team at Pardot Marketing Automation

  Read the article

• Chromebook C720 - issue suspending and booting

  - by user72727

  I recently bought an Acer C720 chromebook (Celeron, 2GB RAM, 16GB SSD) with the intention of loading Linux and using it as a cheap development laptop while on my holiday. The installation sort of went ok but initially the trackpad didn't work so I ran a script that mostly fixed that. My current issues are: Booting: it still goes to the chrome "unknown os" white screen - I have to press ctrl L - then escape then 1 then wait for 30 secs while it seems to be searching for something. Then Ubunto loads up fine. Any idea how to fix this? Suspend: if I close the lid of the laptop then it doesn't seem to suspend properly. At least when I open the lid the screen appears to be on but the screen is blank with a cursor. Nothing responds on the keyboard and I have to hold the power down to restart it. The suspend from the top menu has the same issue. Moving windows: I don't have a mouse click button so how do I move windows around the screen? Launcher bar: I've set mine to auto hide (which it does) but what exactly do you have to do to get it back? I just repeatedly jab the mouse at the side of the screen and eventually it pops up. I don't mind starting all over again but obviously a quick fix is preferred ;) Mike Ubunto 14.04.1 LTS Kernel 3.13.0-32-generic PS Sorry for so many questions.

  Read the article

• Reacting to rectangle on rectangle collisions

  - by mcjohnalds45

  I don't know how to react to collisions between two axis aligned rectangles that have x, y, width and height values (x and y are from the centre of the box) to make them simply not overlap. I figured I'd just make them move away from each other depending on how far they intersect in the opposite direction (left, right, up or down) of where they collided. If I check for collisions only on the x axis or only on the y axis it works fine, but when checking for both collisions crazy stuff happens. This code executes when the first box collides with the second. It's in lua but feel free to answer in anything that isn't to too counter-intuitive. if box1.x < box2.x then box1.x = box1.x + box2.x - box1.x - (box1.width / 2) - (box2.width / 2) end if box1.x > box2.x then box1.x = box1.x - (box1.x - box2.x - (box1.width / 2) - (box2.width / 2)) end if box1.y < box2.y then box1.y = box1.y + box2.y - box1.y - (box1.height / 2) - (box2.height / 2) end if box1.y > box2.y then box1.y = box1.y - (box1.y - box2.y - (box1.height / 2) - (box2.height / 2)) end

  Read the article

• Read-only lock on a SharePoint site collection, or Why can't I edit anymore?

  - by PeterBrunone

  Monday morning, the calls started.  For some reason, long-time users were unable to edit list items.  I figured we had a permissions issue, so I popped in to look at the Site Settings -- and found that I couldn't.  A quick trip to Central Administration showed that I was still listed as a Site Collection Administrator, but I had no power at all on the site collection in question.A quick glance at the logs told me that the server had recently shut down unexpectedly (this is a Hyper-V virtual machine).  Apparently, in the confusion, somehow SharePoint decided to lock the site collection as Read Only.  This can be remedied in one of two ways:1)  In Central Administration, go to Application Management->SharePoint Site Management->Site collection quotas and locks.  Once you have arrived, select the correct application and site collection, and you will have the opportunity to view and set the lock status of the collection (it most likely will be set to "Read-only", and you'll want to move that radio button to "Not locked").2)  Fire up stsadm and issue the following command:stsadm -o setsitelock -url http://myportalsitecollection -lock none

  Read the article

• Turn-based Client-Server Card Game - Unicast (TCP) or Multicast (UDP)

  - by LDM91

  I am currently planning to make a card game project where the clients will communicate with the server in a turn-based and synchronous manner using messages sent over sockets. The problem I have is how to handle the following scenario: (Client takes it turn and sends its action to server) Client sends a message telling the server its move for the turn (e.g. plays the card 5 from its hand which needs to placed onto the table) Server receives messages and updates game state (server will hold all game state). Server iterates through a list of connected clients and sends a message to tell of them change in state Clients all refresh to display the state This is all based on using TCP, and looking at it now it seems a bit like the Observer pattern. The reason this seems to be an issue to me is this message doesn't seem to be point-to-point like the others as I want to send it to all the clients, and doesn't seem very efficient sending the same message in that way. I was thinking about using multicasting with UDP as then I could send the message to all the clients, however wouldn't this mean that the clients would in theory be able to message each other? There is of course the synchronous aspect as well, though this could be put on top of the UDP I guess. Basically, I would like to know what would be good practice as this project is really all about learning, and even though it won't be big enough to encounter performance issues from this I would like to consider them anyway. However, please note I am not interested in using message oriented middleware as a solution (I have experience with using MOM and I'm interested in considering other options excluding MOM if TCP sockets is a bad idea!).

  Read the article

• Best way to mask 2D sprites in XNA?

  - by electroflame

  I currently am trying to mask some sprites. Rather than explaining it in words, I've made up some example pictures: The area to mask (in white) Now, the red sprite that needs to be cropped. The final result. Now, I'm aware that in XNA you can do two things to accomplish this: Use the Stencil Buffer. Use a Pixel Shader. I have tried to do a pixel shader, which essentially did this: float4 main(float2 texCoord : TEXCOORD0) : COLOR0 { float4 tex = tex2D(BaseTexture, texCoord); float4 bitMask = tex2D(MaskTexture, texCoord); if (bitMask.a > 0) { return float4(tex.r, tex.g, tex.b, tex.a); } else { return float4(0, 0, 0, 0); } } This seems to crop the images (albeit, not correct once the image starts to move), but my problem is that the images are constantly moving (they aren't static), so this cropping needs to be dynamic. Is there a way I could alter the shader code to take into account it's position? Alternatively, I've read about using the Stencil Buffer, but most of the samples seem to hinge on using a rendertarget, which I really don't want to do. (I'm already using 3 or 4 for the rest of the game, and adding another one on top of it seems overkill) The only tutorial I've found that doesn't use Rendertargets is one from Shawn Hargreaves' blog over here. The issue with that one, though is that it's for XNA 3.1, and doesn't seem to translate well to XNA 4.0. It seems to me that the pixel shader is the way to go, but I'm unsure of how to get the positioning correct. I believe I would have to change my onscreen coordinates (something like 500, 500) to be between 0 and 1 for the shader coordinates. My only problem is trying to work out how to correctly use the transformed coordinates. Thanks in advance for any help!

  Read the article

• Writing Web "server less" applications

  - by crodjer

  TL;DR What are the prospects of write applications which are completely based on a REST database server (CouchDB) and web applications which directly access the DB instead of having a web server in between? I recently started looking up some NoSQL databases. MongoDB seems to be a popular choices. I also liked the project. But I personally liked the REST interface of CouchDB. So what I wanted to know is if there was the possibility of applications (maybe cached apps in web browser, a chrome extension etc.) which could just just query the database directly with no requirement of a webserver in between. All the computational logic would reside in the client application and the database will do what it does, CRUD. Since mostly (I don't know which doesn't) client frameworks support REST quaries, it could be a good way writing applications well optimized for respective framework. These applications though won't be doing complicated computation, but still provide enough functionality which could replace lots of conventional applications. Are existing resources and projects which would help me move towards writing such applications and also the scope and moving towards developing in this way? Are their any technical/security issues with this? This post will help me decide to look into project like CouchDB (and maybe Dive into Erlang later) or stay with the conventional frameworks (like django) and SQL databases. Update A specific point of such apps I had in mind is creation of offline applications just by replicating couchdb data on client.

  Read the article

• Ubuntu 12.04 Faster boot, Hibernate & other questions

  - by Samarth Shukla

  I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

  Read the article

• SDL mouse wheel not picking up

  - by Chris

  Running Ubuntu 11.04, SDL 1.2 trying to pickup mouse wheel up/down movement with this (stripped down) code: int main( int argc, char **argv ) { SDL_MouseButtonEvent *mousebutton = NULL; while ( !done ) { if(mousebutton != NULL && mousebutton->button == SDL_BUTTON_LEFT) yrot += 0.75f; else if(mousebutton != NULL && mousebutton->button == SDL_BUTTON_RIGHT) yrot -= 0.75f; else if(mousebutton != NULL && mousebutton->button == SDL_BUTTON_WHEELUP){ xrot += 0.75f; }else if(mousebutton != NULL && mousebutton->button == SDL_BUTTON_WHEELDOWN){ xrot -= 0.75f; } while ( SDL_PollEvent( &event ) ) { switch( event.type ) { case SDL_MOUSEBUTTONDOWN: mousebutton = &event.button; break; case SDL_MOUSEBUTTONUP: mousebutton = NULL; break; default: break; } } } return 0; } strange thing is, scrolling with the mouse button does nothing, but if I hold down a mouse button or two and then move the mouse it hits the SDL_BUTTON_WHEEL code occasionally. This honestly reeks of a pointer issue, which would make sense since I've been spoiled with C# for the past couple years, but I am just not seeing it. How do i correctly find mouse scroll events in SDL?

  Read the article

• Methodology To Determine Cause Of User Specific Error

  - by user3163629

  We have software that for certain clients fails to download a file. The software is developed in Python and compiled into an Windows Executable. The cause of the error is still unknown but we have established that the client has an active internet connection. We suspect that the cause is due to the clients network setup. This error cannot be replicated in house. What technique or methodology should be applied to this kind of specific error that cannot be replicated in house. The end goal is to determine the cause of this error so we can move onto the solution. For example; Remote Debugging: Produce a debug version of the software and ask the client to send back a debug output file. This involves alot of time (back and forth communication) and requires the client to work and act in a timely manor to be successful. In-house debugging: Visit the client and determine their network setup, etc. Possibly develop a series of script tests before hand to run on the clients computer under the same network. Other methodologies and techniques I am not aware of?

  Read the article

• CodePlex Daily Summary for Saturday, September 15, 2012

  CodePlex Daily Summary for Saturday, September 15, 2012Popular ReleasesMCEBuddy 2.x: MCEBuddy 2.2.15: Changelog for 2.2.15 (32bit and 64bit) 1. Added support for %originalfilepath% to get the source file full path. Used for custom commands only. 2. Added support for better parsing of Media Portal XML files to extract ShowName and Episode Name and download additional details from TVDB (like Season No, Episode No etc). 3. Added support for TVDB seriesID in metadata 4. Added support for eMail non blocking UI testCrashReporter.NET : Exception reporting library for C# and VB.NET: CrashReporter.NET 1.2: *Added html mail format which shows hierarchical exception report for better understanding.VCC: Latest build, v2.3.00914.0: Automatic drop of latest buildScarlet Road: Scarlet Road Test Build 007: Playable game. Includes source.DotNetNuke Search Engine Sitemaps Provider: Version 02.00.00: New release of the Search Engine Sitemap Providers New version - not backwards compatible with 1.x versions New sandboxing to prevent exceptions in module providers interfering with main provider Now installable using the Host->Extensions page New sitemaps available for Active Forums and Ventrian Property Agent Now derived from DotNetNuke Provider base for better framework integration DotNetNuke minimum compatibility raised to DNN 5.2, .NET to 3.5PDF Viewer Web part: PDF Viewer Web Part: PDF Viewer Web PartChris on SharePoint Solutions: View Grid Banding - v1.0: Initial release of the View Creation and Management Page Column Selector Banding solution.$linq - A Javascript LINQ library: Version 1.0: Version 1.0 Initial releasePowerConverter: PowerConverter Beta: This is the first release of PowerConverter. Allows for converting PE code to Power code.NetView Control for Microsoft Access: DevVersion 19852 - More Databinding and Resizing: NetView Renamed event GotFocus to Clicked Added events Clicked/DoubleClicked Added event BackgroundDoubleClicked Changed nomenclature for world coordinates to (Position1, Position2)|Extent1xExtent2 Renamed Locked -> Readonly Added properties Minimum1/Maximum1 and Minimum2/Maximum2 Removed NetView.DeviceDefinitionArea, obsolete properties Support for resizing Added properties BackColor and BorderColor NetView Properties form added binding field for BusinessId propagate erro...Runtime Dynamic Data Model Builder: Main Library Version 1.0.0.0: Main Library Version 1.0.0.0Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.67: Fix issue #18629 - incorrectly handling null characters in string literals and not throwing an error when outside string literals. update for Issue #18600 - forgot to make the ///#DEBUG= directive also set a known-global for the given debug namespace. removed the kill-switch for disregarding preprocessor define-comments (///#IF and the like) and created a separate CodeSettings.IgnorePreprocessorDefines property for those who really need to turn that off. Some people had been setting -kil...Lakana - WPF Framework: Lakana V2: Lakana V2 contains : - Lakana WPF Forms (with sample project) - Lakana WPF Navigation (with sample project)Microsoft SQL Server Product Samples: Database: OData QueryFeed workflow activity: The OData QueryFeed sample activity shows how to create a workflow activity that consumes an OData resource, and renders entity properties in a Microsoft Excel 2010 worksheet or Microsoft Word 2010 document. Using the sample QueryFeed activity, you can consume any OData resource. The sample activity uses LINQ to project OData metadata into activity designer expression items. By setting activity expressions, a fully qualified OData query string is constructed consisting of Resource, Filter, Or...Arduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the visualmicro.com forum for more news and updates Version 1209.10 includes support for VS2012 and minor fixes for the Arduino debugger beta test team. Version 1208.19 is considered stable for visual studio 2010 and 2008. If you are upgrading from an older release of Visual Micro and encounter a problem then uninstall "Visual Micro for Arduino" using "Control Panel>Add and Remove Programs" and then run the install again. Key Features of 1209.10 Support for Visual Studio 2...Social Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...New ProjectsBizTalk Zombie Management: A powerful tool to handle zombie. As a service you can monitor all zombie instance and process them. For the moment only file is supporting.bxkw8: oooooooooooh long johnsonCellularSolver: The main idea of a this project - create cellular automation (CA) simulation system. We try to reduce ODE/PDE/Integral Equations models to CA-modelEAWebService: EAWebService is web service that executes parallel evolutionary algorithm. Finite Element Method Samples with C#: Finite Element Method Samples with C# Game Jolt C# Trophy API: The Game Jolt Trophy API provides dotNET developers with access to the Game Jolt services including Trophies, High Scores, Data Storage and many more.GNSystem: GNSystem is a simple (yet, no so elegant) Web-Application which contains a Forum system and a CMS\Blog system. GNSystem is written in ASP.Net MVC 4 using C#Hospital Management System (HMS): HMS is a software basically working to make the hospital management much easier and fasterInfinity - WPF.MVC: Framework for WPF/SL/WinFormsKindle: Kindle PublisherMetroCash: A personal finance management programmetroCIS: metroCIS - Eine open-source Anwendung für Windows8 Verwalte dein Studium an der FH Technikum Wien mit dieser App und erleichter dir damit dein Studentenleben.MTAC: MTAC, for My Tfs Administration Center, is a centralized administration tool for TFSMyStart: Create an Open Source implementation of the Windows Start Menu (based initially on Windows 7), to be used on Windows 8.NLite Data Framework: NLite Linq ORM frameworkPDF Viewer Web part: Here now presenting PDF Viewer web part solution with code. Project91405: dfgfdgfdrProject91407: awqwqProject91407M: 111Purchasesales(??????): a simple Sales Manage Project.QueryOver Specification: A simple implementation of the Specification Pattern using NHibernate QueryOver.Shopping Analytics: Esta aplicacion muestra como aprovechar diversas caracteristicas de la plataforma Windows Phone.simbo: Simbo is a simple, fun app for sharing small notes with friends where many of the concepts in your note can be represented by a symbols.SISLOG: El sistema de logística SISLOG es un software que cual será capaz de automatizar y optimizar los procesos que se llevan a cabo en el área de logística.SQL Server Scripts - A RSSUG CodePlex Project: The SQL Server Scripts project is dedicated to supplying high quality scripts to help with the maintenance and development of SQL Server in every environment.Talqum.League: Talqum.League is a League organisator and statistics app.The Pratoriate Foundation: used for all software dev projects for the non profit Pratoriate Foundation.

  Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >