Search Results

Search found 38088 results on 1524 pages for 'large scale project'.

Page 237/1524 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• OSB 11g & SAP – Single Channel/Program ID for Multiple IDOCs

  - by Shub Lahiri, A-Team

  Background This note is a supplement to the blog entry, SOA 11g & SAP – Single Channel/Program ID for Multiple IDOCs by Greg Mally. Greg has shown how a single SOA Suite composite can be used with iWay Adapters to receive multiple IDOC types via a single channel in the adapter, corresponding to a single programID on the SAP system. We will try to address the same requirements within the OSB framework here. Project Built - Design Time The basic build of an OSB project with iWay SAP Adapter, as seen in another entry in this blog, consists of working in OSB Design console and Application Explorer. OSB Design Time - Part 1 We will create a placeholder project first in OSB with a proper directory structure, so that we can export the WSDL, XSD and the JCA binding information from Application Explorer directly into this project. Application Explorer - iWay Design Time Tool Receiving IDOCs is classified as an inbound event within Application Explorer. For setting up events, a channel is first defined (e.g. iDoc_Channel) using the same PROGRAMID (RFC destination), as defined within SAP for the OSB server. Next, the same channel is used to export the JCA Inbound Event artifacts for the candidate IDOC, e.g. DEBMAS06 directly to the pre-created OSB project. Note that the validation for schema has been turned off. As a result, this will allow the adapter, at runtime, to use a single channel to receive multiple IDOC types from SAP and pass them on to the OSB runtime engine without any validation. In other words, we do not have to repeat the above step for each IDOC type. OSB Design Time - Part 2 Create 2 simple XML based Business Services to write to a file, e.g.  SAP_DEBMAS_File and SAP_MATMAS_File. Next, generate a Proxy Service using the JCA binding file exported from Application Explorer in the previous section. In the generated proxy service, edit the message flow and add a route node. Add a routing table in the route node with the following routing function. fn:local-name-from-QName(fn:node-name($body/*[1])) This function takes advantage of the fact that the XML payload at runtime, after translation by adapter, has the IDOC type as the top element. With the routing function in place, build the routing table to add 2 branches to route the IDOCs to the appropriate Business Service for writing the XML payload to files in separate directories. This completes the build of the OSB project. Testing - Run-Time After deployment and activation, the SAP adapter will wait to receive multiple types of IDOCs sent from the SAP system using a single channel. Upon receipt of the IDOCs, the OSB project will route them appropriately to save the corresponding XML payloads for different IDOC types in different directories.

  Read the article

• How to handle interruptions in developer work without losing concentration? [closed]

  - by tomaszs

  I work as a developer for some years now. Mainly the issue why it's antisocial work is because you need to spend much time programming. I've been always the kind of developer who likes to cut off from any sources of distraction and spend several hours on project because in this way i (as i hope) do it faster. There are also other kinds of developers, more social that can chat, read, watch movies while development and they are ok with this and don't hesitate to be interrupted in their work in any time and come back to the project without any problem. For me any distraction is source of frustration because i need to spend substantial time to load my mind with all info about the project and to concentrate back on the tasks. I always thought it's better to do this that way because project is completed faster. But it makes some things difficult: it's hard to chat with someone who needs to have some important info: because you are a bit frustrated when you know you loose your Zen. And sometimes its more important to chat with someone than to loose Zen. Well.. mostly in any other kind of work the ability to be "multitask" is very important. But as a developer and as a person it's also very important to stay social. And i see now that the problem of concentration makes it difficult to make the right chose: the cost of maintaining concentration is just sometimes so damn high! So is it only me that i have so little concentration skills so any interruption is for me a big deal? Maybe it's just i have so bad memory so that i dont remember all issues of a project so long? Or maybe i develop the project in a fashion that requires me to store so much info on my mind only to be able to start working with code? Or should i just accept that being more social will make me finish project slower and in the fashion that i personally consider non 100% productive? And it's just normal thing and i should just accept it and start to live like any other person who has many works and don't assume that programming is in any case other than any other work and i just do fuzz about the whole concentration thing? This is question for mid-pro developers. I think you was having the same dillema in your life. I would be glad if you could help me take the right road here because it's just driving me and i suppose people i work with crazy for years.

  Read the article

• Notes - Part I - Say Hello from Java

  - by Silviu Turuga

  Sometimes we need to take small notes to remember things, one way to do this is to use stick notes and have them all around our desktop. But what happening if you have a lot of notes and a small office? You'll need a piece of software that will sort things for you and also it will provide you a quick way to retrieve the notes when need. Did I mention that this will keep your desktop clean and also will reduce paper waste? During the next days we'll gonna create an application that will let you manage your notes, put them in different categories etc. I'll show you step by step what do you need to do and finally you'll have the application run on multiple systems, such as Mac, Windows, Linux, etc. The only pre-requisition for this lesson is to have JDK 7 with JavaFX installed and an IDE, preferably NetBeans. I'll call this application Notes…. Part I - Say Hello from Java  From NetBeans go to Files->New Project Chose JavaFX->JavaFX FXML Application Project Name: Notes FXML name: NotesUI Check Create Application Class and name it Main After this the project is created and you'll see the following structure As a best practice I advice you to have your code in your own package instead of the default one. right click on Source Packages and chose New->Java Package name it something like this: com.turuga.notes and click Next after the package is created, select all the 3 files from step #3 and drag them over the new package chose Refactor, as this will make sure all the references are correctly moved inside the new package now you should have the following structure if you'll try to run the project you'll get an error: Unable to find class: Main right click on project name Notes and click properties go to Run and you'll see Application Class set to Main, but because we have defined our own packages, this location has been change, so click on Browse and the correct one appear: com.turuga.notes.Main last modification before running the project is to right click on NotesUI.fxml and chose Edit (if you'll double click it will open in JavaFX Scene Builder) look around line 9 and change fx:controller="NotesUIController" to fx:controller="com.turuga.notes.NotesUIController" now you are ready to run it and you should see the following On the next lesson we'll continue to play with NetBeans and start working on the interface of our project

  Read the article

• SQL Server source control from Visual Studio

  - by David Atkinson

  Developers have long since had to context switch between two IDEs, Visual Studio for application code development and SQL Server Management Studio for database development. While this is accepted, especially given the richness of the database development feature set in SSMS, loading a separate tool can seem a little overkill. This is where SQL Connect comes in. This is an add-in to Visual Studio that provides a connected development experience for the SQL Server developer. Connected database development involves modifying a development sandbox database, as opposed to offline development, where SQL text files are modified independently of the database. One of the main complaints of Data Dude (VS DBPro) is that it enforces the offline approach. This gripe is what SQL Connect addresses. If you don't already use SQL Source Control, you can get up and running with SQL Connect by adding a new project to your Visual Studio solution as follows: Then choose your existing development database and you're ready to go. If you already use SQL Source Control, you will need to link SQL Connect to your existing database scripts folder repository, so SQL Connect and SQL Source Control can be used collaboratively (note that SQL Source Control v.3.0.9.18 or later is required). Locate the repository (this can be found in the Setup tab in SQL Source Control). .and create a working folder for it (here I'm using TortoiseSVN). Back in Visual Studio, locate the SQL Connect panel (in the View menu if it hasn't auto loaded) and select Import SQL Source Control project Locate your working folder and click Import. This creates a Red Gate database project under your solution: From here you can modify your development database, and manage your changes in source control. To associate your development database with the project, right click on the project node, select Properties, set the database and Save. Now you're ready to make some changes. Locate the object you'd like to modify in the Solution Explorer, and double click it to invoke a query window or table designer. You also have the option to edit the creation SQL directly using Edit SQL File in Project. Keeping the development database and Visual Studio project in sync is as easy as clicking on a button. One you've made your change, you can use whichever mechanism you choose to commit to source control. Here I'm using the free open-source AnkhSVN to integrate Subversion with Visual Studio. Maintaining your database in a Visual Studio solution means that you can commit database changes and application code changes in the same changeset. This is desirable if you have continuous integration set up as you want to ensure that all files related to a change are committed atomically, so you avoid an interim "broken build". More discussion on SQL Connect and its benefits can be found in the following article on Simple Talk: No More Disconnected SQL Development in Visual Studio The SQL Connect project team is currently assessing the backlog for the next development effort, and they'd appreciate your feature suggestions, as well as your votes on their suggestions site: http://redgate.uservoice.com/forums/140800-sql-connect-for-visual-studio- A 28-day free trial of SQL Connect is available from the Red Gate website. Technorati Tags: SQL Server

  Read the article

• Sharing configuration settings between Windows Azure roles

  - by theo.spears

  If you are working on a medium-large Windows Azure project it's likely it will involve more than one role, for example separate web and worker roles. Unfortunately although all the windows azure configuration settings are stored in a single cscfg file, there is no way to share configuration settings between multiple roles. This means you have to duplicate common settings like connection strings across all your roles. There is an open Connect issue about this topic, but Microsoft have not said when they will fix it. In the mean time I've put together a dirty dirty hack cunning workaround that creates a fake role containing your shared configuration settings, and copies it to all roles as part of the build process. Here's how you set it up: 1. Download the zip file attached to this post, and unzip it into the folder containing your Azure project (not your solution folder). 2. Edit your csdef and cscfg files to include the placeholder project ServiceDefinition.csdef<?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="AzureSpendNotifier" http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition%22"http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="GLOBAL"> <ConfigurationSettings> <Setting name="ExampleSetting" /> </ConfigurationSettings> </WorkerRole> <WorkerRole name="MyWorker"> <ConfigurationSettings> </ConfigurationSettings> </WorkerRole> <WebRole name="MyWeb"> <Sites> <Site name="Web"> <Bindings> <Binding name="WebEndpoint" endpointName="WebEndpoint" /> </Bindings> </Site> </Sites> <ConfigurationSettings> </ConfigurationSettings> </WebRole> </ServiceDefinition> ServiceConfiguration.cscfg<?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="AzureSpendNotifier" xmlns=http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration osFamily="1" osVersion="*"> <Role name="GLOBAL"> <ConfigurationSettings> <Setting name="ExampleSetting" value="Hello World" /> </ConfigurationSettings> <Instances count="1" /> </Role> <Role name="MyWorker"> <Instances count="1" /> <ConfigurationSettings> </ConfigurationSettings> </Role> <Role name="MyWeb"> <Instances count="1" /> <ConfigurationSettings> </ConfigurationSettings> </Role> </ServiceConfiguration> It is important that all your roles contain a ConfigurationSettings entry in both cscfg and csdef files, even if it's empty- otherwise the shared configuration settings will not be inserted. 3. Open your azure deployment (.ccproj) project in notepad, and add the highlighted line below: ... <Import Project="$(CloudExtensionsDir)Microsoft.CloudService.targets" /> <Import Project="globalsettings/globalsettings.targets" /> </Project> It is important you add this below the Microsoft.CloudService.targets import line, as it replaces some of the rules defined in that file. Visual studio will prompt you to reload the project, say yes. At this point you will have a new Azure role called 'GLOBAL' with settings you can edit through the visual studio properties panel as normal. This role will never be deployed, but any settings you add to it will be copied to all your other roles when deployed or tested locally within visual studio.

  Read the article

• Multiple schema validation in Java

  - by user279554

  Hi, I am trying to do multiple schema validation in Java. I don't understand where I am doing wrong. Any help will be appreciated. abc.xsd <?xml version="1.0" encoding="UTF-8"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xn="project-xml-r4j_another.xsd"> <xsd:import namespace="project-xml-r4j_another.xsd"/> <xsd:element name="abc" type="abc"> </xsd:element> <xsd:complexType name="abc"> <xsd:sequence> <xsd:element name="test" type="test" minOccurs="0" maxOccurs="1"> </xsd:element> <!--<xsd:element name="proj" type="xn:proj"/>--> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID" use="required"/> </xsd:complexType> <xsd:complexType name="test"> <xsd:attribute name="id" type="xsd:ID" use="required"></xsd:attribute> <xsd:attribute name="value" use="required"> <xsd:simpleType> <xsd:restriction base="xsd:string"> <xsd:maxLength value="100" /> </xsd:restriction> </xsd:simpleType> </xsd:attribute> </xsd:complexType> </xsd:schema> project-xml-r4j_another.xsd <?xml version="1.0" encoding="UTF-8"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="project-xml-r4j_another.xsd" xmlns="project-xml-r4j_another.xsd" elementFormDefault="qualified" attributeFormDefault="unqualified"> <xsd:element name="proj" type="proj"> <xsd:annotation> <xsd:documentation> The project is the root tag of a project-xml. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:complexType name="proj"> <xsd:attribute name="id" type="xsd:ID" use="required"/> </xsd:complexType> </xsd:schema> Test case package test; import java.io.File; import java.io.IOException; import javax.xml.XMLConstants; import javax.xml.transform.Source; import javax.xml.transform.stream.StreamSource; import javax.xml.validation.Schema; import javax.xml.validation.SchemaFactory; import javax.xml.validation.Validator; import org.apache.log4j.Logger; import org.junit.Test; import org.xml.sax.SAXException; import org.xml.sax.SAXParseException; import org.xml.sax.helpers.DefaultHandler; import com.ericsson.ccrtool.core.project.projectxml.InvalidProjectXmlException; public class TestSchema { private static final Logger logger = Logger.getLogger(TestSchema.class); static final String W3C_XML_SCHEMA = XMLConstants.W3C_XML_SCHEMA_NS_URI; @Test public void test() { System.out.println("TestSchema.test()"); try { SchemaFactory schemaFactory = SchemaFactory.newInstance(W3C_XML_SCHEMA); // create a grammar object. Source [] source = { new StreamSource(new File("C:\\jaydeep\\Ericsson\\R5B\\abc.xsd")), new StreamSource(new File("C:\\jaydeep\\Ericsson\\R5B\\project-xml-r4j.xsd"))}; Schema schemaGrammar = schemaFactory.newSchema(source); Validator schemaValidator = schemaGrammar.newValidator(); schemaValidator.setErrorHandler(new MessageHandler()); // validate xml instance against the grammar. schemaValidator.validate(new StreamSource("C:\\jaydeep\\Ericsson\\R5B\\project_tmmk17cells_xnaveen_project-xml.xml")); } catch (SAXException e) { throw new InvalidProjectXmlException("Project-xml validation failed, Exception: " + e.getMessage(), e); } catch (IOException e) { throw new InvalidProjectXmlException("Project-xml validation failed, Exception: " + e.getMessage(), e); } } class MessageHandler extends DefaultHandler { private String errMessage = ""; @Override public void warning(SAXParseException e) { logger.info("Warning Line " + e.getLineNumber() + ": " + e.getMessage()); } @Override public void error(SAXParseException e) { errMessage = new String("Error Line " + e.getLineNumber() + ": " + e.getMessage()); logger.info(errMessage); throw new InvalidProjectXmlException("Project-xml validation failed, Exception: " + errMessage); } @Override public void fatalError(SAXParseException e) { errMessage = new String("Error Line " + e.getLineNumber() + ": " + e.getMessage()); logger.info(errMessage); throw new InvalidProjectXmlException("Project-xml validation failed, Exception: " + errMessage); } } } Thanks, Jaydeep

  Read the article

• Simple OpenGL program major slow down at high resolution

  - by Grieverheart

  I have created a small OpenGL 3.3 (Core) program using freeglut. The whole geometry is two boxes and one plane with some textures. I can move around like in an FPS and that's it. The problem is I face a big slow down of fps when I make my window large (i.e. above 1920x1080). I have monitors GPU usage when in full-screen and it shows GPU load of nearly 100% and Memory Controller load of ~85%. When at 600x600, these numbers are at about 45%, my CPU is also at full load. I use deferred rendering at the moment but even when forward rendering, the slow down was nearly as severe. I can't imagine my GPU is not powerful enough for something this simple when I play many games at 1080p (I have a GeForce GT 120M btw). Below are my shaders, First Pass #VS #version 330 core uniform mat4 ModelViewMatrix; uniform mat3 NormalMatrix; uniform mat4 MVPMatrix; uniform float scale; layout(location = 0) in vec3 in_Position; layout(location = 1) in vec3 in_Normal; layout(location = 2) in vec2 in_TexCoord; smooth out vec3 pass_Normal; smooth out vec3 pass_Position; smooth out vec2 TexCoord; void main(void){ pass_Position = (ModelViewMatrix * vec4(scale * in_Position, 1.0)).xyz; pass_Normal = NormalMatrix * in_Normal; TexCoord = in_TexCoord; gl_Position = MVPMatrix * vec4(scale * in_Position, 1.0); } #FS #version 330 core uniform sampler2D inSampler; smooth in vec3 pass_Normal; smooth in vec3 pass_Position; smooth in vec2 TexCoord; layout(location = 0) out vec3 outPosition; layout(location = 1) out vec3 outDiffuse; layout(location = 2) out vec3 outNormal; void main(void){ outPosition = pass_Position; outDiffuse = texture(inSampler, TexCoord).xyz; outNormal = pass_Normal; } Second Pass #VS #version 330 core uniform float scale; layout(location = 0) in vec3 in_Position; void main(void){ gl_Position = mat4(1.0) * vec4(scale * in_Position, 1.0); } #FS #version 330 core struct Light{ vec3 direction; }; uniform ivec2 ScreenSize; uniform Light light; uniform sampler2D PositionMap; uniform sampler2D ColorMap; uniform sampler2D NormalMap; out vec4 out_Color; vec2 CalcTexCoord(void){ return gl_FragCoord.xy / ScreenSize; } vec4 CalcLight(vec3 position, vec3 normal){ vec4 DiffuseColor = vec4(0.0); vec4 SpecularColor = vec4(0.0); vec3 light_Direction = -normalize(light.direction); float diffuse = max(0.0, dot(normal, light_Direction)); if(diffuse 0.0){ DiffuseColor = diffuse * vec4(1.0); vec3 camera_Direction = normalize(-position); vec3 half_vector = normalize(camera_Direction + light_Direction); float specular = max(0.0, dot(normal, half_vector)); float fspecular = pow(specular, 128.0); SpecularColor = fspecular * vec4(1.0); } return DiffuseColor + SpecularColor + vec4(0.1); } void main(void){ vec2 TexCoord = CalcTexCoord(); vec3 Position = texture(PositionMap, TexCoord).xyz; vec3 Color = texture(ColorMap, TexCoord).xyz; vec3 Normal = normalize(texture(NormalMap, TexCoord).xyz); out_Color = vec4(Color, 1.0) * CalcLight(Position, Normal); } Is it normal for the GPU to be used that much under the described circumstances? Is it due to poor performance of freeglut? I understand that the problem could be specific to my code, but I can't paste the whole code here, if you need more info, please tell me.

  Read the article

• How to Speed Up Any Android Phone By Disabling Animations

  - by Chris Hoffman

  Android phones — and tablets, too — display animations when moving between apps and screens. These animations look very slick, but they waste time — especially on fast phones, which could switch between apps instantly if not for the animations. Disabling these animations will speed up navigating between different apps and interface screens on your phone, saving you time. You can also speed up the animations if you’d rather see them. Access the Developer Options Menu First, we’ll need to access the Developer Options menu. It’s hidden by default so Android users won’t stumble across it unless they’re actually looking for it. To access the Developer Options menu, open the Settings screen, scroll down to the bottom of the list, and tap the About phone or About tablet option. Scroll down to the Build number field and tap it repeatedly. Eventually, you’ll see a message appear saying “You are now a developer!”. The Developer options submenu now appears on the Settings screen. You’ll find it near the bottom of the list, just above the About phone or About tablet option. Disable Interface Animations Open the Developer Options screen and slide the switch at the top of the screen to On. This allows you to change the hidden options on this screen. If you ever want to re-enable the animations and revert your changes, all you have to do is slide the Developer Options switch back to Off. Scroll down to the Drawing section. You’ll find the three options we want here — Window animation scale, Transition animation scale, and Animator duration scale. Tap each option and set it to Animation off to disable the associated animations. If you’d like to speed up the animations without disabling them entirely, select the Animation .5x option instead. If you’re feeling really crazy, you can even select longer animation durations. You can make the animations take as much as ten times longer with the Animation 10x setting. The Animator duration scale option applies to the transition animation that appears when you tap the app drawer button on your home screen.  Your change here won’t take effect immediately — you’ll have to restart Android’s launcher after changing the Animator duration scale setting. To restart Android’s launcher, open the Settings screen, tap Apps, swipe over to the All category, scroll down, and tap the Launcher app. Tap the Force stop button to forcibly close the launcher, then tap your device’s home button to re-launch the launcher. Your app drawer will now open immediately, too. Now whenever you open an app or transition to a new screen, it will pop up as quickly as possible — no waiting for animations and wasting processing power rendering them. How much of a speed improvement you’ll see here depends on your Android device and how fast it is. On our Nexus 4, this change makes many apps appear and become usable instantly if they’re running in the background. If you have a slower device, you may have to wait a moment for apps to be usable. That’s one of the big reasons why Android and other operating systems use animations. Animations help paper over delays that can occur while the operating system loads the app.     

  Read the article

• Child transforms problem when loading 3DS models using assimp

  - by MhdSyrwan

  I'm trying to load a textured 3d model into my scene using assimp model loader. The problem is that child meshes are not situated correctly (they don't have the correct transformations). In brief: all the mTansform matrices are identity matrices, why would that be? I'm using this code to render the model: void recursive_render (const struct aiScene *sc, const struct aiNode* nd, float scale) { unsigned int i; unsigned int n=0, t; aiMatrix4x4 m = nd->mTransformation; m.Scaling(aiVector3D(scale, scale, scale), m); // update transform m.Transpose(); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if (mesh->HasBones()){ printf("model has bones"); abort(); } if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } if(mesh->mColors[0] != NULL) { glEnable(GL_COLOR_MATERIAL); } else { glDisable(GL_COLOR_MATERIAL); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++)// go through all vertices in face { int vertexIndex = face->mIndices[i];// get group index for current index if(mesh->mColors[0] != NULL) Color4f(&mesh->mColors[0][vertexIndex]); if(mesh->mNormals != NULL) if(mesh->HasTextureCoords(0))//HasTextureCoords(texture_coordinates_set) { glTexCoord2f(mesh->mTextureCoords[0][vertexIndex].x, 1 - mesh->mTextureCoords[0][vertexIndex].y); //mTextureCoords[channel][vertex] } glNormal3fv(&mesh->mNormals[vertexIndex].x); glVertex3fv(&mesh->mVertices[vertexIndex].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n], scale); } glPopMatrix(); } What's the problem in my code ? I've added some code to abort the program if there's any bone in the meshes, but the program doesn't abort, this means : no bones, is that normal? if (mesh->HasBones()){ printf("model has bones"); abort(); } Note: I am using openGL & SFML & assimp

  Read the article

• Projective texture and deferred lighting

  - by Vodácek

  In my previous question, I asked whether it is possible to do projective texturing with deferred lighting. Now (more than half a year later) I have a problem with my implementation of the same thing. I am trying to apply this technique in light pass. (my projector doesn't affect albedo). I have this projector View a Projection matrix: Matrix projection = Matrix.CreateOrthographicOffCenter(-halfWidth * Scale, halfWidth * Scale, -halfHeight * Scale, halfHeight * Scale, 1, 100000); Matrix view = Matrix.CreateLookAt(Position, Target, Vector3.Up); Where halfWidth and halfHeight is are half of the texture's width and height, Position is the Projector's position and target is the projector's target. This seems to be ok. I am drawing full screen quad with this shader: float4x4 InvViewProjection; texture2D DepthTexture; texture2D NormalTexture; texture2D ProjectorTexture; float4x4 ProjectorViewProjection; sampler2D depthSampler = sampler_state { texture = <DepthTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D normalSampler = sampler_state { texture = <NormalTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D projectorSampler = sampler_state { texture = <ProjectorTexture>; AddressU = Clamp; AddressV = Clamp; }; float viewportWidth; float viewportHeight; // Calculate the 2D screen position of a 3D position float2 postProjToScreen(float4 position) { float2 screenPos = position.xy / position.w; return 0.5f * (float2(screenPos.x, -screenPos.y) + 1); } // Calculate the size of one half of a pixel, to convert // between texels and pixels float2 halfPixel() { return 0.5f / float2(viewportWidth, viewportHeight); } struct VertexShaderInput { float4 Position : POSITION0; }; struct VertexShaderOutput { float4 Position :POSITION0; float4 PositionCopy : TEXCOORD1; }; VertexShaderOutput VertexShaderFunction(VertexShaderInput input) { VertexShaderOutput output; output.Position = input.Position; output.PositionCopy=output.Position; return output; } float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float2 texCoord =postProjToScreen(input.PositionCopy) + halfPixel(); // Extract the depth for this pixel from the depth map float4 depth = tex2D(depthSampler, texCoord); //return float4(depth.r,0,0,1); // Recreate the position with the UV coordinates and depth value float4 position; position.x = texCoord.x * 2 - 1; position.y = (1 - texCoord.y) * 2 - 1; position.z = depth.r; position.w = 1.0f; // Transform position from screen space to world space position = mul(position, InvViewProjection); position.xyz /= position.w; //compute projection float3 projection=tex2D(projectorSampler,postProjToScreen(mul(position,ProjectorViewProjection)) + halfPixel()); return float4(projection,1); } In first part of pixel shader is recovered position from G-buffer (this code I am using in other shaders without any problem) and then is tranformed to projector viewprojection space. Problem is that projection doesn't appear. Here is an image of my situation: The green lines are the rendered projector frustum. Where is my mistake hidden? I am using XNA 4. Thanks for advice and sorry for my English. EDIT: Shader above is working but projection was too small. When I changed the Scale property to a large value (e.g. 100), the projection appears. But when the camera moves toward the projection, the projection expands, as can bee seen on this YouTube video.

  Read the article

• Why Are We Here?

  - by Jonathan Mills

  Back in the early 2000s, Toyota had a vision of building the number one best selling minivan in North America. Their current minivan, the Sienna, was small, underpowered, and badly needed help.  Yuji Yokoya was given the job of re-engineering the Sienna. There was just one problem, Yuji, lived in Japan. He did not know the people or places that he would be engineering for. Believe it or not, Japan is nothing like North America. So, what does a chief engineer do in a situation like that? He packed up his team and flew halfway around the world. He made a commitment to drive through every state in the US, every province in Canada, and Mexico. He met the people and drove the roads that the Sienna would be driving. And guess what, what he learned on that trip revolutionized the Sienna. The innovations he made, sent the Sienna to number one. Why? Because he knew who he was building his product for. He knew, why he was there.Let me ask you this, do you know why you are building what you are building? As a member of a product team, can you tell me how your product will be used in the real world? As you are writing code, building test plans, writing stories, or any of the other project tasks, can you picture the face of a person who will be using what you are building? All to often, the answer to those questions is, no. Why is it important? Because, every day, project team members make assumptions. Over a given project, it is safe to say project team members will make thousands of assumptions about what they are doing. And all to often, those assumptions are not quite right. Its not that they are not good at their job, its just that they don’t really know why they are there.So, what to do? First and foremost, stop doing what you are doing. Yes, really. Schedule some time to go visit the people who will be using your product. Don’t invite them to you, go to them. Watch them work. Interact with them. Ask them questions. Maybe even try it out yourself. This serves two purposes. One, It shows them that you care about them. They will be far more engaged in your project if they feel like you care. And nothing says you care more that spending some time. Second, if gives you the proper frame of reference for you work. It gives you something tangible to go back to as you are building your product. As you make the thousands of assumptions that you will make over the life of your project, it gives you something to see in your mind that makes it real to you.Ultimately, setting a proper frame of reference is critical to the overall success of a project. The funny thing is, it really does not even take that long. In most cases, a 2-3 hour session will give you most of what you need to get the right insight. For the project, it will be the best 2 hours you could spend.

  Read the article

• Play in NetBeans IDE (Part 2)

  - by Geertjan

  Peter Hilton was one of many nice people I met for the first time during the last few days constituting JAX London. He did a session today on the Play framework which, if I understand it correctly, is an HTML5 framework. It doesn't use web.xml, Java EE, etc. It uses Scala internally, as well as in its templating language.  Support for Play would, I guess, based on the little I know about it right now, consist of extending the HTML5 application project, which is new in NetBeans IDE 7.3. The workflow I imagine goes as follows. You'd create a new HTML5 application project, at which point you can choose a variety of frameworks and templates (Coffee Script, Angular, etc), which comes out of the box with the HTML5 support (i.e., Project Easel) in NetBeans IDE 7.3. Then, once the project is created, you'll right-click it and go to the Project Properties dialog, where you'll be able to enable Play support: At this stage, i.e., when you've checked the checkbox above and then clicked OK, all the necessary Play files will be added to your project, e.g., the routes file and the application.conf, for example. And then you have a Play application. Creating support in this way entails nothing more than creating a module that looks like this, i.e., with one Java class, where even the layer.xml file below is superfluous: All the code in the PlayEnablerPlanel.java that you see above is as follows: import java.awt.BorderLayout; import javax.swing.JCheckBox; import javax.swing.JComponent; import javax.swing.JPanel; import org.netbeans.spi.project.ui.support.ProjectCustomizer; import org.netbeans.spi.project.ui.support.ProjectCustomizer.Category; import org.openide.util.Lookup; public class PlayEnablerPanel implements ProjectCustomizer.CompositeCategoryProvider {     @ProjectCustomizer.CompositeCategoryProvider.Registration(             projectType = "org.netbeans.modules.web.clientproject",             position = 1000)     public static PlayEnablerPanel enablePlay() {         return new PlayEnablerPanel();     }     @Override     public Category createCategory(Lookup lkp) {         return ProjectCustomizer.Category.create("Play Framework", "Configure Play", null);     }     @Override     public JComponent createComponent(Category ctgr, Lookup lkp) {         JPanel playPanel = new JPanel(new BorderLayout());         playPanel.add(new JCheckBox("Enable Play"), BorderLayout.NORTH);         return playPanel;     } } Looking forward to having a beer with Peter soon (he lives not far away, in Rotterdam) to discuss this! Also read Part 1 of this series, which I wrote some time ago, and which has other ideas and considerations.

  Read the article

• Is changing my job now a wise decision? [closed]

  - by FlaminPhoenix

  First a little background about myself. I am a javascript programmer with 3.8 years of experience. I joined my current company a year and 3 months ago, and I was recruited as a javascript programmer. I was under the impression I was a programmer in a programming team but this was not the case. No one else except me and my manager knows anything about programming in my team. The other two teammates, copy paste stuff from websites into excel sheets. I was told I was being recruited for a new project, and it was true. The only problem was that the server side language they were using was PHP. They were using a popular library with PHP, and I had never worked with PHP before. Nevertheless, I learnt it well enough to get things working, and received high praise from my boss's boss on whichever project I worked on. Words like "wow" , "This looks great, the clients gonna be impressed with this." were sprinkled every now and then on reviewing my work. They even managed to sell my work to a couple of clients and as I understand, both of my projects are going to fetch them a pretty buck. The problem: I was asked to move into a project which my manager was handling. I asked them for training on the project which never came, and sure enough I couldnt complete my first task on the new project without shortcomings. I told my manager there were things I didnt know how to get done in the new project due to lack of training. His project had 0 documentation. I was told he would "take care" of everything relating to those shortcomings. In the meantime, I was asked to switch to another project. My manager made the necessary changes and later told me that the build had "broken" on the production server and that I needed to "test" my changes before saying things were done. I never deployed it on the production server. He did. I never saw / had the opportunity to see the final build before it went to production. He called me for a separate meeting and started pointing fingers at me, but I took full responsibility even if I didnt have to. He later on got on a call with his boss, in my presence, and gave him the impression that it was all my fault. I did not confront him about this so far. I have worked late / done overtime without them asking a lot, but last week, I just got home from work, and I got calls asking me to solve an issue which till then they had kept quiet about even though they were informed about it. I asked my manager why I hadnt been tasked with this when I was in office. He started telling me which statements to put where, as if to mock me, and that this "is hardly an overtime issue" and this pissed me off. Also, during the previous meeting, he was constantly talking highly about his work, at the same time trying to demean mine. In the meantime, I have attended an interview with another MNC, and the interviewers there were fully respectful of my decision to leave my current company. Its a software company, so I can expect my colleagues to know a lot more than me. Im told I can expect their offer anytime this week. My questions: Is my anger towards my manager justified? While leaving, do I tell him that its because of his actions that Im leaving? Do I erupt in anger and tell him that he shouldnt have put the blame on me since he was the one doing the deployment? This is going to be my second resignation to this company. The first time I wanted to resign, I was asked to stay back and my manager promised a lot of changes, a couple of which were made. How do I keep myself from getting into such situations with my employers in the future?

  Read the article

• “Being Agile” Means No Documentation, Right?

  - by jesschadwick

  Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

  Read the article

• International Radio Operators Alphabet in F# &amp; Silverlight &ndash; Part 2

  - by MarkPearl

  So the brunt of my my very complex F# code has been done. Now it’s just putting the Silverlight stuff in. The first thing I did was add a new project to my solution. I gave it a name and VS2010 did the rest of the magic in creating the .Web project etc. In this instance because I want to take the MVVM approach and make use of commanding I have decided to make the frontend a Silverlight4 project. I now need move my F# code into a proper Silverlight Library. Warning – when you create the Silverlight Library VS2010 will ask you whether you want it to be based on Silverlight3 or Silverlight4. I originally went for Silverlight4 only to discover when I tried to compile my solution that I was given an error… Error 12 F# runtime for Silverlight version v4.0 is not installed. Please go to http://go.microsoft.com/fwlink/?LinkId=177463 to download and install matching.. After asking around I discovered that the Silverlight4 F# runtime is not available yet. No problem, the suggestion was to change the F# Silverlight Library to a Silverlight3 project however when going to the properties of the project file – even though I changed it to Silverlight3, VS2010 did not like it and kept reverting it to a Silverlight4 project. After a few minutes of scratching my head I simply deleted Silverlight4 F# Library project and created a new F# Silverlight Library project in Silverlight3 and VS2010 was happy. Now that the project structure is set up, rest is fairly simple. You need to add the Silverlight Library as a reference to the C# Silverlight Front End. Then setup your views, since I was following the MVVM pattern I made a Views & ViewModel folder and set up the relevant View and ViewModels. The MainPageViewModel file looks as follows using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Collections.ObjectModel; namespace IROAFrontEnd.ViewModels { public class MainPageViewModel : ViewModelBase { private string _iroaString; private string _inputCharacters; public string InputCharacters { get { return _inputCharacters; } set { if (_inputCharacters != value) { _inputCharacters = value; OnPropertyChanged("InputCharacters"); } } } public string IROAString { get { return _iroaString; } set { if (_iroaString != value) { _iroaString = value; OnPropertyChanged("IROAString"); } } } public ICommand MySpecialCommand { get { return new MyCommand(this); } } public class MyCommand : ICommand { readonly MainPageViewModel _myViewModel; public MyCommand(MainPageViewModel myViewModel) { _myViewModel = myViewModel; } public event EventHandler CanExecuteChanged; public bool CanExecute(object parameter) { return true; } public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } } } } One of the features I like in Silverlight4 is the new commanding. You will notice in my I have put the code under the command execute to reference to my F# module. At the moment this could be cleaned up even more, but will suffice for now.. public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } I then needed to set the view up. If we have a look at the MainPageView.xaml the xaml code will look like the following…. Nothing to fancy, but battleship grey for now… take careful note of the binding of the command in the button to MySpecialCommand which was created in the ViewModel. <UserControl x:Class="IROAFrontEnd.Views.MainPageView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <TextBox Grid.Row="0" Text="{Binding InputCharacters, Mode=TwoWay}"/> <Button Grid.Row="1" Command="{Binding MySpecialCommand}"> <TextBlock Text="Generate"/> </Button> <TextBlock Grid.Row="2" Text="{Binding IROAString}"/> </Grid> </UserControl> Finally in the App.xaml.cs file we need to set the View and link it to the ViewModel. private void Application_Startup(object sender, StartupEventArgs e) { var myView = new MainPageView(); var myViewModel = new MainPageViewModel(); myView.DataContext = myViewModel; this.RootVisual = myView; }   Once this is done – hey presto – it worked. I typed in some “Test Input” and clicked the generate button and the correct Radio Operators Alphabet was generated. And that’s the end of my first very basic F# Silverlight application.

  Read the article

• Upgrading SSIS Custom Components for SQL Server 2012

  Having finally got around to upgrading my custom components to SQL Server 2012, I thought I’d share some notes on the process. One of the goals was minimal duplication, so the same code files are used to build the 2008 and 2012 components, I just have a separate project file. The high level steps are listed below, followed by some more details. Create a 2012 copy of the project file Upgrade project, just open the new project file is VS2010 Change target framework to .NET 4.0 Set conditional compilation symbol for DENALI Change any conditional code, including assembly version and UI type name Edit project file to change referenced assemblies for 2012 Change target framework to .NET 4.0 Open the project properties. On the Applications page, change the Target framework to .NET Framework 4. Set conditional compilation symbol for DENALI Re-open the project properties. On the Build tab, first change the Configuration to All Configurations, then set a Conditional compilation symbol of DENALI. Change any conditional code, including assembly version and UI type name The value doesn’t have to be DENALI, it can actually be anything you like, that is just what I use. It is how I control sections of code that vary between versions. There were several API changes between 2005 and 2008, as well as interface name changes. Whilst we don’t have the same issues between 2008 and 2012, I still have some sections of code that do change such as the assembly attributes. #if DENALI [assembly: AssemblyDescription("Data Generator Source for SQL Server Integration Services 2012")] [assembly: AssemblyCopyright("Copyright © 2012 Konesans Ltd")] [assembly: AssemblyVersion("3.0.0.0")] #else [assembly: AssemblyDescription("Data Generator Source for SQL Server Integration Services 2008")] [assembly: AssemblyCopyright("Copyright © 2008 Konesans Ltd")] [assembly: AssemblyVersion("2.0.0.0")] #endif The Visual Studio editor automatically formats the code based on the current compilation symbols, hence in this case the 2008 code is grey to indicate it is disabled. As you can see in the previous example I have distinct assembly version attributes, ensuring I can run both 2008 and 2012 versions of my component side by side. For custom components with a user interface, be sure to update the UITypeName property of the DtsTask or DtsPipelineComponent attributes. As above I use the conditional compilation symbol to control the code. #if DENALI [DtsTask ( DisplayName = "File Watcher Task", Description = "File Watcher Task", IconResource = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask.ico", UITypeName = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTaskUI,Konesans.Dts.Tasks.FileWatcherTask,Version=3.0.0.0,Culture=Neutral,PublicKeyToken=b2ab4a111192992b", TaskContact = "File Watcher Task; Konesans Ltd; Copyright © 2012 Konesans Ltd; http://www.konesans.com" )] #else [DtsTask ( DisplayName = "File Watcher Task", Description = "File Watcher Task", IconResource = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask.ico", UITypeName = "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTaskUI,Konesans.Dts.Tasks.FileWatcherTask,Version=2.0.0.0,Culture=Neutral,PublicKeyToken=b2ab4a111192992b", TaskContact = "File Watcher Task; Konesans Ltd; Copyright © 2004-2008 Konesans Ltd; http://www.konesans.com" )] #endif public sealed class FileWatcherTask: Task, IDTSComponentPersist, IDTSBreakpointSite, IDTSSuspend { // .. code goes on... } Shown below is another example I found that needed changing. I borrow one of the MS editors, and use it against a custom property, but need to ensure I reference the correct version of the MS controls assembly. This section of code is actually shared between the 2005, 2008 and 2012 versions of my component hence it has test for both DENALI and KATMAI symbols. #if DENALI const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=11.0.00.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #elif KATMAI const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #else const string multiLineUI = "Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; #endif // Create Match Expression parameter IDTSCustomPropertyCollection100 propertyCollection = outputColumn.CustomPropertyCollection; IDTSCustomProperty100 property = propertyCollection.New(); property = propertyCollection.New(); property.Name = MatchParams.Name; property.Description = MatchParams.Description; property.TypeConverter = typeof(MultilineStringConverter).AssemblyQualifiedName; property.UITypeEditor = multiLineUI; property.Value = MatchParams.DefaultValue; Edit project file to change referenced assemblies for 2012 We now need to edit the project file itself. Open the MyComponente2012.cproj  in you favourite text editor, and then perform a couple of find and replaces as listed below: Find Replace Comment Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 Change the assembly references version from SQL Server 2008 to SQL Server 2012. Microsoft SQL Server\100\ Microsoft SQL Server\110\ Change any assembly reference hint path locations from from SQL Server 2008 to SQL Server 2012. If you use any Build Events during development, such as copying the component assembly to the DTS folder, or calling GACUTIL to install it into the GAC, you can also change these now. An example of my new post-build event for a pipeline component is shown below, which uses the .NET 4.0 path for GACUTIL. It also uses the 110 folder location, instead of 100 for SQL Server 2008, but that was covered the the previous find and replace. "C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\gacutil.exe" /if "$(TargetPath)" copy "$(TargetPath)" "%ProgramFiles%\Microsoft SQL Server\110\DTS\PipelineComponents" /Y

  Read the article

• BizTalk: namespaces

  - by Leonid Ganeline

  BizTalk team did a good job hiding the .NET guts from developers. Developers are working with editors and hardly with .NET code. The Orchestration editor, the Mapper, the Schema editor, the Pipeline editor, all these editors hide what is going on with artifacts created and deployed. Working with the BizTalk artifacts year after year brings us some knowledge which could help to understand more about the .NET guts. I would like to highlight the .NET namespaces. What they are, how they influence our everyday tasks in the BizTalk application development. What is it? Most of the BizTalk artifacts are compiled into the NET classes. Not all of them… but I will show you later. Classes are placed inside the namespaces. I will not describe here why we need namespaces and what is it. I assume you all know about it more then me. Here I would like to emphasize that almost each BizTalk artifact is implemented as a .NET class within a .NET namespace. Where to see the namespaces in development? The namespaces are inconsistently spread across the artifact parameters. Let’s start with namespace placement in development. Then we go with namespaces in deployment and operations. I am using pictures from the BizTalk Server 2013 Beta and the Visual Studio 2012 but there was no changes regarding the namespaces starting from the BizTalk 2006. Default namespace When a new BizTalk project is created, the default namespace is set up the same as a name of a project. This namespace would be used for all new BizTalk artifacts added to this project. Orchestrations When we select a green or a red markers (the Begin and End orchestration shapes) we will see the orchestration Properties window. We also can click anywhere on the space between Port Surfaces to see this window.   Schemas The only way to see the NET namespace for map is selecting the schema file name into the Solution Explorer. Notes: We can also see the Type Name parameter. It is a name of the correspondent .NET class. We can also see the Fully Qualified Name parameter. We cannot see the schema namespace when selecting any node on the schema editor surface. Only selecting a schema file name gives us a namespace parameter. If we select a <Schema> node we can get the Target Namespace parameter of the schema. This is NOT the .NET namespace! It is an XML namespace. See this XML namespace inside the XML schema, it is shown as a special targetNamespace attribute Here this XML namespace appears inside the XML document itself. It is shown as a special xmlns attribute.   Maps It is similar to the schemas. The only way to see the NET namespace for map is selecting a map file name into the Solution Explorer. Pipelines It is similar to the schemas. The only way to see the NET namespace for pipeline is selecting a pipeline file name into the Solution Explorer. z Ports, Policies and Tracking Profiles The Send and Receive Ports, the Policies and the BAM Tracking Profiles do not create the .NET classes and they do not have the associated .NET namespaces. How to copy artifacts? Since the new versions of the BizTalk Server are going to production I am spending more and more time redesigning and refactoring the BizTalk applications. It is good to know how the refactoring process copes with the .NET namespaces. Let see what is going on with the namespaces when we copy the artifacts from one project to another. Here is an example: I am going to group the artifacts under the project folders. So, I have created a Group folder, have run the Add / Existing Item.. command and have chosen all artifacts in the project root. The artifact copies were created in the Group folder: What was happened with the namespaces of the artifacts? As you can see, the folder name, the “Group”, was added to the namespace. It is great! When I added a folder, I have added one more level in the name hierarchy and the namespace change just reflexes this hierarchy change.  The same namespace adjustment happens when we copy the BizTalk artifacts between the projects. But there is an issue with the namespace of an orchestration. It was not changed. The namespaces of the schemas, maps, pipelines are changed but not the orchestration namespace. I have to change the orchestration namespace manually. Now another example: I am creating a new Project folder and moving the artifacts there from the project root by drag and drop. We will mention the artifact namespaces are not changed. Another example: I am copying the artifacts from the project root by (drag and drop) + Ctrl. We will mention the artifact namespaces are changed. It works exactly as it was with the Add / Existing Item.. command. Conclusion: The namespace parameter is put inconsistently in different places for different artifacts Moving artifacts changes the namespaces of the schemas, maps, pipelines but not the orchestrations.

  Read the article

• "OutputPath property is not set" error occurs only when calling MSBuild in CCNET

  - by LostInCCNET

  I've made an MSBuild project that simply does an msbuild task with our solution file as parameter. I've defined a BeforeBuild target where I set some properties, and a Build target that executes the msbuild task. I've confirmed that no errors occured when building the msbuild script in the command line console. However, when I use it in the msbuild task in my CCNET project, I keep getting the following error: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (483,9): error: The OutputPath property is not set for project 'MyProject.msbuild'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='AnyCPU'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. I checked the build log and it seems that the error occurs during _CheckForInvalidConfigurationAndPlatform. It wasn't even able to continue to my Build task! Since the script is only intended to build the solution under Debug/Release and AnyCPU as platform, I tried to add the following lines to my msbuild project: <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> <OutputPath>.\bin\Debug\</OutputPath> </PropertyGroup> <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' "> <OutputPath>.\bin\Release\</OutputPath> </PropertyGroup> I could still build the project without errors in the command line, but CCNET is returning the same error mentioned above. I don't understand why CCNET keeps getting the error, and I don't know what else to try. Please help.

  Read the article

• Which datagrid to use for ASP.NET MVC2 project?

  - by Nick

  Hi, I am developing a commercial MVC2 app that requires a grid that has callback update in some form to support 10,000+ rows. It should also support relatively rich content (icons, multiline descriptions etc). Although it requires the usual paging/scrolling/sorting features it does not need support for grouping. So nothing that special. The commercial grids I looked at were Component Art (http://www.componentart.com/products/aspnetmvc/datagrid/) and Telerik (http://www.telerik.com/products/aspnet-mvc/grid.aspx) which both look pretty good but may be a little OTT for what I need. They are also $800 and $999 respectively (1 developer). I've also looked at jqGrid (http://www.trirand.net/download.aspx) and the grid from MvcContrib. These appear ok but for a commercial app I am concerned that these may be risky options - though could be wrong there. I'd really appreciate any views/exprience on either the above grids or perhaps you can suggest a better option/approach. FYI I am using EF4 and C#. Cheers

  Read the article

• GIT repository layout for server with multiple projects

  - by Paul Alexander

  One of the things I like about the way I have Subversion set up is that I can have a single main repository with multiple projects. When I want to work on a project I can check out just that project. Like this \main \ProductA \ProductB \Shared then svn checkout http://.../main/ProductA As a new user to git I want to explore a bit of best practice in the field before committing to a specific workflow. From what I've read so far, git stores everything in a single .git folder at the root of the project tree. So I could do one of two things. Set up a separate project for each Product. Set up a single massive project and store products in sub folders. There are dependencies between the products, so the single massive project seems appropriate. We'll be using a server where all the developers can share their code. I've already got this working over SSH & HTTP and that part I love. However, the repositories in SVN are already many GB in size so dragging around the entire repository on each machine seems like a bad idea - especially since we're billed for excessive network bandwidth. I'd imagine that the Linux kernel project repositories are equally large so there must be a proper way of handling this with Git but I just haven't figured it out yet. Are there any guidelines or best practices for working with very large multi-project repositories?

  Read the article

• Zxing barcode source code integration to the android project.

  - by sujitjitu

  Hi I want to integrate the zxing source code to my android application. I have downloaded the zxing1.5 and integrate the whole code to my application and i am calling the activity "CaptureActivity" through intent. It is showing only the camera view but it is not scanning the barcode. Can u please tell me how to solve this problem because i want my application to be stand alone. i don't want to install BarcodeScanner.apk separately in the device. thanks in advance....

  Read the article

• Fitting an Image to Screen on Rotation iPhone / iPad ?

  - by user356937

  I have been playing around with one of the iPhone examples from Apple' web site (ScrollViewSuite) . I am trying to tweak it a bit so that when I rotate the the iPad the image will fit into the screen in landscape mode vertical. I have been successful in getting the image to rotate, but the image is larger than the height of the landscape screen, so the bottom is below the screen. I would like to image to scale to the height of the landscape screen. I have been playing around with various autoSizingMask attributes without success. The imageView is called "zoomView" this is the actual image which loads into a scrollView called imageScrollView. I am trying to achieve the screen to rotate and look like this.... olsonvox.com/photos/correct.png However, this is what My screen is looking like. olsonvox.com/photos/incorrect.png I would really appreciate some advice or guidance. Below is the RootViewController.m for the project. Blade # import "RootViewController.h" #define ZOOM_VIEW_TAG 100 #define ZOOM_STEP 1.5 #define THUMB_HEIGHT 150 #define THUMB_V_PADDING 25 #define THUMB_H_PADDING 25 #define CREDIT_LABEL_HEIGHT 25 #define AUTOSCROLL_THRESHOLD 30 @interface RootViewController (ViewHandlingMethods) - (void)toggleThumbView; - (void)pickImageNamed:(NSString *)name; - (NSArray *)imageNames; - (void)createThumbScrollViewIfNecessary; - (void)createSlideUpViewIfNecessary; @end @interface RootViewController (AutoscrollingMethods) - (void)maybeAutoscrollForThumb:(ThumbImageView *)thumb; - (void)autoscrollTimerFired:(NSTimer *)timer; - (void)legalizeAutoscrollDistance; - (float)autoscrollDistanceForProximityToEdge:(float)proximity; @end @interface RootViewController (UtilityMethods) - (CGRect)zoomRectForScale:(float)scale withCenter:(CGPoint)center; @end @implementation RootViewController - (void)loadView { [super loadView]; imageScrollView = [[UIScrollView alloc] initWithFrame:[[self view]bounds]]; // this code makes the image resize to the width and height properly. imageScrollView.autoresizingMask = UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleLeftMargin | UIViewAutoresizingFlexibleRightMargin| UIViewAutoresizingFlexibleBottomMargin| UIViewAutoresizingFlexibleBottomMargin; // TRY SETTNG CENTER HERE SOMEHOW&gt;.... [imageScrollView setBackgroundColor:[UIColor blackColor]]; [imageScrollView setDelegate:self]; [imageScrollView setBouncesZoom:YES]; [[self view] addSubview:imageScrollView]; [self toggleThumbView]; // intitializes with the first image. [self pickImageNamed:@"lookbook1"]; } - (void)dealloc { [imageScrollView release]; [slideUpView release]; [thumbScrollView release]; [super dealloc]; } #pragma mark UIScrollViewDelegate methods - (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { UIView *view = nil; if (scrollView == imageScrollView) { view = [imageScrollView viewWithTag:ZOOM_VIEW_TAG]; } return view; } /************************************** NOTE **************************************/ /* The following delegate method works around a known bug in zoomToRect:animated: */ /* In the next release after 3.0 this workaround will no longer be necessary */ /**********************************************************************************/ - (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale { [scrollView setZoomScale:scale+0.01 animated:NO]; [scrollView setZoomScale:scale animated:NO]; } #pragma mark TapDetectingImageViewDelegate methods - (void)tapDetectingImageView:(TapDetectingImageView *)view gotSingleTapAtPoint:(CGPoint)tapPoint { // Single tap shows or hides drawer of thumbnails. [self toggleThumbView]; } - (void)tapDetectingImageView:(TapDetectingImageView *)view gotDoubleTapAtPoint:(CGPoint)tapPoint { // double tap zooms in float newScale = [imageScrollView zoomScale] * ZOOM_STEP; CGRect zoomRect = [self zoomRectForScale:newScale withCenter:tapPoint]; [imageScrollView zoomToRect:zoomRect animated:YES]; } - (void)tapDetectingImageView:(TapDetectingImageView *)view gotTwoFingerTapAtPoint:(CGPoint)tapPoint { // two-finger tap zooms out float newScale = [imageScrollView zoomScale] / ZOOM_STEP; CGRect zoomRect = [self zoomRectForScale:newScale withCenter:tapPoint]; [imageScrollView zoomToRect:zoomRect animated:YES]; } #pragma mark ThumbImageViewDelegate methods - (void)thumbImageViewWasTapped:(ThumbImageView *)tiv { [self pickImageNamed:[tiv imageName]]; [self toggleThumbView]; } - (void)thumbImageViewStartedTracking:(ThumbImageView *)tiv { [thumbScrollView bringSubviewToFront:tiv]; } // CONTROLS DRAGGING AND DROPPING THUMBNAILS... - (void)thumbImageViewMoved:(ThumbImageView *)draggingThumb { // check if we've moved close enough to an edge to autoscroll, or far enough away to stop autoscrolling [self maybeAutoscrollForThumb:draggingThumb]; /* The rest of this method handles the reordering of thumbnails in the thumbScrollView. See */ /* ThumbImageView.h and ThumbImageView.m for more information about how this works. */ // we'll reorder only if the thumb is overlapping the scroll view if (CGRectIntersectsRect([draggingThumb frame], [thumbScrollView bounds])) { BOOL draggingRight = [draggingThumb frame].origin.x &gt; [draggingThumb home].origin.x ? YES : NO; /* we're going to shift over all the thumbs who live between the home of the moving thumb */ /* and the current touch location. A thumb counts as living in this area if the midpoint */ /* of its home is contained in the area. */ NSMutableArray *thumbsToShift = [[NSMutableArray alloc] init]; // get the touch location in the coordinate system of the scroll view CGPoint touchLocation = [draggingThumb convertPoint:[draggingThumb touchLocation] toView:thumbScrollView]; // calculate minimum and maximum boundaries of the affected area float minX = draggingRight ? CGRectGetMaxX([draggingThumb home]) : touchLocation.x; float maxX = draggingRight ? touchLocation.x : CGRectGetMinX([draggingThumb home]); // iterate through thumbnails and see which ones need to move over for (ThumbImageView *thumb in [thumbScrollView subviews]) { // skip the thumb being dragged if (thumb == draggingThumb) continue; // skip non-thumb subviews of the scroll view (such as the scroll indicators) if (! [thumb isMemberOfClass:[ThumbImageView class]]) continue; float thumbMidpoint = CGRectGetMidX([thumb home]); if (thumbMidpoint &gt;= minX &amp;&amp; thumbMidpoint &lt;= maxX) { [thumbsToShift addObject:thumb]; } } // shift over the other thumbs to make room for the dragging thumb. (if we're dragging right, they shift to the left) float otherThumbShift = ([draggingThumb home].size.width + THUMB_H_PADDING) * (draggingRight ? -1 : 1); // as we shift over the other thumbs, we'll calculate how much the dragging thumb's home is going to move float draggingThumbShift = 0.0; // send each of the shifting thumbs to its new home for (ThumbImageView *otherThumb in thumbsToShift) { CGRect home = [otherThumb home]; home.origin.x += otherThumbShift; [otherThumb setHome:home]; [otherThumb goHome]; draggingThumbShift += ([otherThumb frame].size.width + THUMB_H_PADDING) * (draggingRight ? 1 : -1); } // change the home of the dragging thumb, but don't send it there because it's still being dragged CGRect home = [draggingThumb home]; home.origin.x += draggingThumbShift; [draggingThumb setHome:home]; } } - (void)thumbImageViewStoppedTracking:(ThumbImageView *)tiv { // if the user lets go of the thumb image view, stop autoscrolling [autoscrollTimer invalidate]; autoscrollTimer = nil; } #pragma mark Autoscrolling methods - (void)maybeAutoscrollForThumb:(ThumbImageView *)thumb { autoscrollDistance = 0; // only autoscroll if the thumb is overlapping the thumbScrollView if (CGRectIntersectsRect([thumb frame], [thumbScrollView bounds])) { CGPoint touchLocation = [thumb convertPoint:[thumb touchLocation] toView:thumbScrollView]; float distanceFromLeftEdge = touchLocation.x - CGRectGetMinX([thumbScrollView bounds]); float distanceFromRightEdge = CGRectGetMaxX([thumbScrollView bounds]) - touchLocation.x; if (distanceFromLeftEdge &lt; AUTOSCROLL_THRESHOLD) { autoscrollDistance = [self autoscrollDistanceForProximityToEdge:distanceFromLeftEdge] * -1; // if scrolling left, distance is negative } else if (distanceFromRightEdge &lt; AUTOSCROLL_THRESHOLD) { autoscrollDistance = [self autoscrollDistanceForProximityToEdge:distanceFromRightEdge]; } } // if no autoscrolling, stop and clear timer if (autoscrollDistance == 0) { [autoscrollTimer invalidate]; autoscrollTimer = nil; } // otherwise create and start timer (if we don't already have a timer going) else if (autoscrollTimer == nil) { autoscrollTimer = [NSTimer scheduledTimerWithTimeInterval:(1.0 / 60.0) target:self selector:@selector(autoscrollTimerFired:) userInfo:thumb repeats:YES]; } } - (float)autoscrollDistanceForProximityToEdge:(float)proximity { // the scroll distance grows as the proximity to the edge decreases, so that moving the thumb // further over results in faster scrolling. return ceilf((AUTOSCROLL_THRESHOLD - proximity) / 5.0); } - (void)legalizeAutoscrollDistance { // makes sure the autoscroll distance won't result in scrolling past the content of the scroll view float minimumLegalDistance = [thumbScrollView contentOffset].x * -1; float maximumLegalDistance = [thumbScrollView contentSize].width - ([thumbScrollView frame].size.width + [thumbScrollView contentOffset].x); autoscrollDistance = MAX(autoscrollDistance, minimumLegalDistance); autoscrollDistance = MIN(autoscrollDistance, maximumLegalDistance); } - (void)autoscrollTimerFired:(NSTimer*)timer { [self legalizeAutoscrollDistance]; // autoscroll by changing content offset CGPoint contentOffset = [thumbScrollView contentOffset]; contentOffset.x += autoscrollDistance; [thumbScrollView setContentOffset:contentOffset]; // adjust thumb position so it appears to stay still ThumbImageView *thumb = (ThumbImageView *)[timer userInfo]; [thumb moveByOffset:CGPointMake(autoscrollDistance, 0)]; } #pragma mark View handling methods - (void)toggleThumbView { [self createSlideUpViewIfNecessary]; // no-op if slideUpView has already been created CGRect frame = [slideUpView frame]; if (thumbViewShowing) { frame.origin.y = 0; } else { frame.origin.y = -225; } [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.3]; [slideUpView setFrame:frame]; [UIView commitAnimations]; thumbViewShowing = !thumbViewShowing; } - (void)pickImageNamed:(NSString *)name { // first remove previous image view, if any [[imageScrollView viewWithTag:ZOOM_VIEW_TAG] removeFromSuperview]; UIImage *image = [UIImage imageNamed:[NSString stringWithFormat:@"%@.jpg", name]]; TapDetectingImageView *zoomView = [[TapDetectingImageView alloc] initWithImage:image]; zoomView.autoresizingMask = UIViewAutoresizingFlexibleWidth ; [zoomView setDelegate:self]; [zoomView setTag:ZOOM_VIEW_TAG]; [imageScrollView addSubview:zoomView]; [imageScrollView setContentSize:[zoomView frame].size]; [zoomView release]; // choose minimum scale so image width fits screen float minScale = [imageScrollView frame].size.width / [zoomView frame].size.width; [imageScrollView setMinimumZoomScale:minScale]; [imageScrollView setZoomScale:minScale]; [imageScrollView setContentOffset:CGPointZero]; } - (NSArray *)imageNames { // the filenames are stored in a plist in the app bundle, so create array by reading this plist NSString *path = [[NSBundle mainBundle] pathForResource:@"Images" ofType:@"plist"]; NSData *plistData = [NSData dataWithContentsOfFile:path]; NSString *error; NSPropertyListFormat format; NSArray *imageNames = [NSPropertyListSerialization propertyListFromData:plistData mutabilityOption:NSPropertyListImmutable format:&amp;format errorDescription:&amp;error]; if (!imageNames) { NSLog(@"Failed to read image names. Error: %@", error); [error release]; } return imageNames; } - (void)createSlideUpViewIfNecessary { if (!slideUpView) { [self createThumbScrollViewIfNecessary]; CGRect bounds = [[self view] bounds]; float thumbHeight = [thumbScrollView frame].size.height; float labelHeight = CREDIT_LABEL_HEIGHT; // create label giving credit for images UILabel *creditLabel = [[UILabel alloc] initWithFrame:CGRectMake(0, thumbHeight, bounds.size.width, labelHeight)]; [creditLabel setBackgroundColor:[UIColor clearColor]]; [creditLabel setTextColor:[UIColor whiteColor]]; // [creditLabel setFont:[UIFont fontWithName:@"Helvetica" size:16]]; // [creditLabel setText:@"SAMPLE TEXT"]; [creditLabel setTextAlignment:UITextAlignmentCenter]; // create container view that will hold scroll view and label CGRect frame = CGRectMake(0.0, -225.00, bounds.size.width+256, thumbHeight + labelHeight); slideUpView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleTopMargin; slideUpView = [[UIView alloc] initWithFrame:frame]; [slideUpView setBackgroundColor:[UIColor blackColor]]; [slideUpView setOpaque:NO]; [slideUpView setAlpha:.75]; [[self view] addSubview:slideUpView]; // add subviews to container view [slideUpView addSubview:thumbScrollView]; [slideUpView addSubview:creditLabel]; [creditLabel release]; } } - (void)createThumbScrollViewIfNecessary { if (!thumbScrollView) { float scrollViewHeight = THUMB_HEIGHT + THUMB_V_PADDING; float scrollViewWidth = [[self view] bounds].size.width; thumbScrollView = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, scrollViewWidth, scrollViewHeight)]; [thumbScrollView setCanCancelContentTouches:NO]; [thumbScrollView setClipsToBounds:NO]; // now place all the thumb views as subviews of the scroll view // and in the course of doing so calculate the content width float xPosition = THUMB_H_PADDING; for (NSString *name in [self imageNames]) { UIImage *thumbImage = [UIImage imageNamed:[NSString stringWithFormat:@"%@_thumb.jpg", name]]; if (thumbImage) { ThumbImageView *thumbView = [[ThumbImageView alloc] initWithImage:thumbImage]; [thumbView setDelegate:self]; [thumbView setImageName:name]; CGRect frame = [thumbView frame]; frame.origin.y = THUMB_V_PADDING; frame.origin.x = xPosition; [thumbView setFrame:frame]; [thumbView setHome:frame]; [thumbScrollView addSubview:thumbView]; [thumbView release]; xPosition += (frame.size.width + THUMB_H_PADDING); } } [thumbScrollView setContentSize:CGSizeMake(xPosition, scrollViewHeight)]; } } #pragma mark Utility methods - (CGRect)zoomRectForScale:(float)scale withCenter:(CGPoint)center { CGRect zoomRect; // the zoom rect is in the content view's coordinates. // At a zoom scale of 1.0, it would be the size of the imageScrollView's bounds. // As the zoom scale decreases, so more content is visible, the size of the rect grows. zoomRect.size.height = [imageScrollView frame].size.height / scale; zoomRect.size.width = [imageScrollView frame].size.width / scale; // choose an origin so as to get the right center. zoomRect.origin.x = center.x - (zoomRect.size.width / 2.0); zoomRect.origin.y = center.y - (zoomRect.size.height / 2.0); return zoomRect; } #pragma mark - #pragma mark Rotation support // Ensure that the view controller supports rotation and that the split view can therefore show in both portrait and landscape. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } @end

  Read the article

• Does Google Maps API v3 allow larger zoom values ?

  - by Dr1Ku

  If you use the satellite GMapType using this Google-provided example in v3 of the API, the maximum zoom level has a scale of 2m / 10ft , whereas using the v2 version of another Google-provided example (had to use another one since the control-simple doesn't have the scale control) yields the maximum scale of 20m / 50ft. Is this a new "feature" of v3 ? I have to mention that I've tested the examples in the same GLatLng regions - so my guess is that tile detail level doesn't influence it, am I mistaken ? As mentioned in another question, v3 is to be considered of very Labs-y/beta quality, so use in production should be discouraged for the time being. I've been drawn to the subject since I have to "increase the zoom level of a GMap", the answers here seem to suggest using GTileLayer, and I'm considering GMapCreator, although this will involve some effort. What I'm trying to achieve is to have a larger zoom level, a scale of 2m / 10ft would be perfect, I have a map where the tiles aren't that hi-res and quite a few markers. Seeing that the area doesn't have hi-res tiles, the distance between the markers is really tiny, creating some problematic overlapping. Or better yet, how can you create a custom Map which allows higher zoom levels, as by the Google Campus, where the 2m / 10ft scale is achieved, and not use your own tileserver ? I've seen an example on a fellow Stackoverflower's GMaps sandbox , where the tiles are manually created based on the zoom level. I don't think I'm making any more sense, so I'm just going to end this big question here, I've been wondering around trying to find a solution for hours now. Hope that someone comes to my aid though ! Thank you in advance !

  Read the article

• Images in the project NOT adding to array - don't know why.

  - by Sam Jarman

  Hi there, I have to sets of images. Each set has 16 images. One set is called 0.png through to 15.png the other is a0.png through to a15.png. In my app, it loads each one dependent on a variable (which by logging, I have proved it works) here is the code [MemoryManager sharedMemoryManager]; NSLog(@"THEME: %@", [MemoryManager sharedMemoryManager].themeName); imageArray = [[NSMutableArray alloc] init]; if([MemoryManager sharedMemoryManager].themeName == @"hand"){ NSLog(@"Here 2"); [imageArray addObject:[UIImage imageNamed:@"0.png"]]; // [imageArray addObject:[UIImage imageNamed:@"1.png"]];//1 [imageArray addObject:[UIImage imageNamed:@"2.png"]];//2 [imageArray addObject:[UIImage imageNamed:@"3.png"]];//3 [imageArray addObject:[UIImage imageNamed:@"4.png"]];//4 [imageArray addObject:[UIImage imageNamed:@"5.png"]];//5 [imageArray addObject:[UIImage imageNamed:@"6.png"]];//6 [imageArray addObject:[UIImage imageNamed:@"7.png"]];//7 [imageArray addObject:[UIImage imageNamed:@"8.png"]];//8 [imageArray addObject:[UIImage imageNamed:@"9.png"]];//9 [imageArray addObject:[UIImage imageNamed:@"10.png"]];//10 [imageArray addObject:[UIImage imageNamed:@"11.png"]];//11 [imageArray addObject:[UIImage imageNamed:@"12.png"]];//12 [imageArray addObject:[UIImage imageNamed:@"13.png"]];//13 [imageArray addObject:[UIImage imageNamed:@"14.png"]];//14 [imageArray addObject:[UIImage imageNamed:@"15.png"]];//15 } if([MemoryManager sharedMemoryManager].themeName == @"letters"){ NSLog(@"Here 3"); //[imageArray removeAllObjects]; [imageArray addObject:[UIImage imageNamed:@"a0.png"]]; // [imageArray addObject:[UIImage imageNamed:@"a1.png"]];//1 [imageArray addObject:[UIImage imageNamed:@"a2.png"]];//2 [imageArray addObject:[UIImage imageNamed:@"a3.png"]];//3 [imageArray addObject:[UIImage imageNamed:@"a4.png"]];//4 [imageArray addObject:[UIImage imageNamed:@"a5.png"]];//5 [imageArray addObject:[UIImage imageNamed:@"a6.png"]];//6 [imageArray addObject:[UIImage imageNamed:@"a7.png"]];//7 [imageArray addObject:[UIImage imageNamed:@"a8.png"]];//8 [imageArray addObject:[UIImage imageNamed:@"a9.png"]];//9 [imageArray addObject:[UIImage imageNamed:@"a10.png"]];//10 [imageArray addObject:[UIImage imageNamed:@"a11.png"]];//11 [imageArray addObject:[UIImage imageNamed:@"a12.png"]];//12 [imageArray addObject:[UIImage imageNamed:@"a13.png"]];//13 [imageArray addObject:[UIImage imageNamed:@"a14.png"]];//14 [imageArray addObject:[UIImage imageNamed:@"a15.png"]];//15 NSLog(@"Here 4"); } The log says 2010-05-26 21:30:57.092 Memory[22155:207] Here 1 2010-05-26 21:30:57.093 Memory[22155:207] THEME: letters 2010-05-26 21:30:57.095 Memory[22155:207] Here 3 2010-05-26 21:30:57.109 Memory[22155:207] Here 4 The images are in the same folder the .xproj file is. They simply is just not working. Any ideas? Cheers

  Read the article

• what does the "clean" menu item mean on visual studio project right click menu does?

  - by schar

  I never paid attention until I figured out the Infragistics component is retaining its old settings even after I changed and re built. The clean did not solve the problem but I am generally curious. sChar

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >