Search Results

Search found 3522 results on 141 pages for 'ams 23'.

Page 24/141 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• External USB drive is failing

  - by dma_k

  I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

  Read the article

• Server compromised. Bounce message contains many email addresses message was not sent to

  - by Tim Duncklee

  This is not a dupe. Please read and understand the issue before marking this as a duplicate question that has been answered already. Several customers are reporting bounce messages like the one below. At first I thought their computers had a virus but then I received one that was server generated so the problem is with the server. I've inspected the logs and these email addresses do not appear in the logs. The only thing I see that I do not remember seeing in the past are entries like this: Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: hook_dir = '/var/qmail//handlers/before-queue' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: recipient[3] = '[email protected]' Apr 30 13:34:49 psa86 qmail-queue-handlers[20994]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' I've searched here and the web and maybe I'm just not entering the right search terms but I find nothing on this issue. Does anyone know how a hacker would attach additional email addresses to a message at the server and have them not appear in the logs? CentOS release 5.4, Plesk 8.6, QMail 1.03 Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 82.201.133.227 does not like recipient. Remote host said: 550 #5.1.0 Address rejected. Giving up on 82.201.133.227. <[email protected]>: 64.18.7.10 does not like recipient. Remote host said: 550 No such user - psmtp Giving up on 64.18.7.10. <[email protected]>: 173.194.68.27 does not like recipient. Remote host said: 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 w8si1903qag.18 - gsmtp Giving up on 173.194.68.27. <[email protected]>: 207.115.36.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.23. <[email protected]>: 207.115.37.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.22. <[email protected]>: 207.115.37.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.20. <[email protected]>: 207.115.37.23 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.23. <[email protected]>: 207.115.36.22 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.22. <[email protected]>: 74.205.16.140 does not like recipient. Remote host said: 553 sorry, that domain isn't in my list of allowed rcpthosts; no valid cert for gatewaying (#5.7.1) Giving up on 74.205.16.140. <[email protected]>: 207.115.36.20 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.36.20. <[email protected]>: 207.115.37.21 does not like recipient. Remote host said: 550 5.2.1 <[email protected]>... Addressee unknown, relay=[174.142.62.210] Giving up on 207.115.37.21. <[email protected]>: 192.169.41.23 failed after I sent the message. Remote host said: 554 qq Sorry, no valid recipients (#5.1.3) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 15962 invoked from network); 1 May 2013 06:49:34 -0400 Received: from exprod6mo107.postini.com (64.18.1.18) by psa.aaaaaa.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 1 May 2013 06:49:34 -0400 Received: from aaaaaa.com (exprod6lut001.postini.com [64.18.1.199]) by exprod6mo107.postini.com (Postfix) with SMTP id 47F80B8CA4 for <[email protected]>; Wed, 1 May 2013 03:49:33 -0700 (PDT) From: "Support" <[email protected]> To: [email protected] Subject: Detected Potential Junk Mail Date: Wed, 1 May 2013 03:49:33 -0700 Dear [email protected], junk mail protection service has detected suspicious email message(s) since your last visit and directed them to your Message Center. You can inspect your suspicious email at: ... UPDATE: After not seeing this problem for a while, I personally sent a message and immediately got a bounce with several bad addresses that I know I did not send to. These are addresses that are not on my system or on the server. This problem happens with both Mac and Windows clients and with messages generated from Postini and sent to users on my system. This is NOT backscatter. If it was backscatter it would not have the contents of my message in it. UPDATE #2 Here is another bounce. This one was sent by me and the bounce came back immediately. Hi. This is the qmail-send program at psa.aaaaaa.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 71.74.56.227 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>... User unknown Giving up on 71.74.56.227. <[email protected]>: Connected to 208.34.236.3 but sender was rejected. Remote host said: 550 5.7.1 This system is configured to reject mail from 174.142.62.210 [174.142.62.210] (Host blacklisted - Found on Realtime Black List server 'bl.mailspike.net') <[email protected]>: 66.96.80.22 failed after I sent the message. Remote host said: 552 sorry, mailbox [email protected] is over quota temporarily (#5.1.1) <[email protected]>: 83.145.109.52 does not like recipient. Remote host said: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in virtual mailbox table Giving up on 83.145.109.52. <[email protected]>: 69.49.101.234 does not like recipient. Remote host said: 550 5.7.1 <[email protected]>... H:M12 [174.142.62.210] Connection refused due to abuse. Please see http://mailspike.org/anubis/lookup.html or contact your E-mail provider. Giving up on 69.49.101.234. <[email protected]>: 212.55.154.36 does not like recipient. Remote host said: 550-The account has been suspended for inactivity 550 A conta do destinatario encontra-se suspensa por inactividade (#5.2.1) Giving up on 212.55.154.36. <[email protected]>: 199.168.90.102 failed after I sent the message. Remote host said: 552 Transaction [email protected] failed, remote said "550 No such user" (#5.1.1) <[email protected]>: 98.136.217.192 failed after I sent the message. Remote host said: 554 delivery error: dd Sorry your message to [email protected] cannot be delivered. This account has been disabled or discontinued [#102]. - mta1210.sbc.mail.gq1.yahoo.com --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 2618 invoked from network); 2 Jun 2013 22:32:51 -0400 Received: from 75-138-254-239.dhcp.jcsn.tn.charter.com (HELO ?192.168.0.66?) (75.138.254.239) by psa.aaaaaa.com with SMTP; 2 Jun 2013 22:32:48 -0400 User-Agent: Microsoft-Entourage/12.34.0.120813 Date: Sun, 02 Jun 2013 21:32:39 -0500 Subject: Refinance From: Tim Duncklee <[email protected]> To: Scott jones <[email protected]> Message-ID: <CDD16A79.67344%[email protected]> Thread-Topic: Reference Thread-Index: Ac5gAp2QmTs+LRv0SEOy7AJTX2DWzQ== Mime-version: 1.0 Content-type: multipart/mixed; boundary="B_3453053568_12034440" > This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3453053568_12034440 Content-type: multipart/related; boundary="B_3453053568_11982218" --B_3453053568_11982218 Content-type: multipart/alternative; boundary="B_3453053568_12000660" --B_3453053568_12000660 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Scott, ... email body here ... Here are the relevant log entries: Jun 2 22:32:50 psa qmail-queue[2616]: mail: all addreses are uncheckable - need to skip scanning (by deny mode) Jun 2 22:32:50 psa qmail-queue[2616]: scan: the message(drweb.tmp.i2SY0n) sent by [email protected] to [email protected] should be passed without checks, because contains uncheckable addresses Jun 2 22:32:50 psa qmail-queue-handlers[2617]: Handlers Filter before-queue for qmail started ... Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: [email protected] Jun 2 22:32:50 psa qmail-queue-handlers[2617]: hook_dir = '/var/qmail//handlers/before-queue' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: recipient[3] = '[email protected]' Jun 2 22:32:50 psa qmail-queue-handlers[2617]: handlers dir = '/var/qmail//handlers/before-queue/recipient/[email protected]' Jun 2 22:32:51 psa qmail: 1370226771.060211 starting delivery 57: msg 1540285 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.060402 status: local 0/10 remote 1/20 Jun 2 22:32:51 psa qmail: 1370226771.060556 new msg 4915232 Jun 2 22:32:51 psa qmail: 1370226771.060671 info msg 4915232: bytes 687899 from <[email protected]> qp 2618 uid 2020 Jun 2 22:32:51 psa qmail-remote-handlers[2619]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-queue-handlers[2617]: starter: submitter[2618] exited normally Jun 2 22:32:51 psa qmail-remote-handlers[2619]: from= Jun 2 22:32:51 psa qmail-remote-handlers[2619]: [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078732 starting delivery 58: msg 4915232 to remote [email protected] Jun 2 22:32:51 psa qmail: 1370226771.078825 status: local 0/10 remote 2/20 Jun 2 22:32:51 psa qmail-remote-handlers[2621]: Handlers Filter before-remote for qmail started ... Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected] Jun 2 22:32:51 psa qmail-remote-handlers[2621]: [email protected]

  Read the article

• DNS "recursion not available" using a Cisco AnyConnect VPN connection

  - by codeape

  Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

  Read the article

• SSH into Fedora 17 will not work with new users

  - by psion

  I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Error after installing Classified Ad Module on Drupal 7

  - by Ams

  Hello, i just installed Classified Ad but after the installation i get this error: Notice: Undefined index: type in ed_classified_form_alter() (line 218 of /home3/amineamm/public_html/chrini/sites/all/modules/ed_classified/ed_classified.module). When i look up at the php code i can't figure out how to correct it. Here is my code: function ed_classified_form_alter(&$form, $form_state, $form_id) { module_load_include('inc', 'ed_classified', 'ed_classified_utils'); if ($form['type']['#value'] == EDI_CLASSIFIED_MODULE_NAME) { if ($form_id == 'ed_classified_node_form' && $form['attachments'] && _ed_classified_variable_get('alter_attachment_text', EDI_CLASSIFIED_VAR_DEF_ALTER_ATTACHMENT_TEXT) ) { // Don't allow the attachments block to be collapsed. $form['attachments']['#collapsed']=FALSE; $form['attachments']['#collapsible']=FALSE; // Enhance the help for classified ads. // NOTE: this is appropriate for the upload_image module enhancements only! $form['attachments']['#title']=t('Photo Attachments'); $form['attachments']['#description']= _ed_classified_variable_get('alter_attachment_text_description', t(EDI_CLASSIFIED_VAR_DEF_ALTER_ATTACHMENT_TEXT_DESCRIPTION)); } } } Any suggestion ?

  Read the article

• Flex chart not displaying right values along x axis.

  - by Shah Al

  I don't know of any better way to ask this question. If the below code is run (i know the cData sections are not visible in the preview, something causes it to be ignored). The result does not represent the data correctly. 1. Flex ignores missing date 24 aug for DECKER. 2. It wrongly associates 42.77 to 23-Aug instead of 24-AUG. Is there a way in flex, where the x-axis is a union of all available points ? The below code is entirely from : Adobe website link I have only commented 2 data points. //{date:"23-Aug-05", close:45.74}, and //{date:"24-Aug-05", close:150.71}, <?xml version="1.0"?> [Bindable] public var SMITH:ArrayCollection = new ArrayCollection([ {date:"22-Aug-05", close:41.87}, //{date:"23-Aug-05", close:45.74}, {date:"24-Aug-05", close:42.77}, {date:"25-Aug-05", close:48.06}, ]); [Bindable] public var DECKER:ArrayCollection = new ArrayCollection([ {date:"22-Aug-05", close:157.59}, {date:"23-Aug-05", close:160.3}, //{date:"24-Aug-05", close:150.71}, {date:"25-Aug-05", close:156.88}, ]); [Bindable] public var deckerColor:Number = 0x224488; [Bindable] public var smithColor:Number = 0x884422; ]] <mx:horizontalAxisRenderers> <mx:AxisRenderer placement="bottom" axis="{h1}"/> </mx:horizontalAxisRenderers> <mx:verticalAxisRenderers> <mx:AxisRenderer placement="left" axis="{v1}"> <mx:axisStroke>{h1Stroke}</mx:axisStroke> </mx:AxisRenderer> <mx:AxisRenderer placement="left" axis="{v2}"> <mx:axisStroke>{h2Stroke}</mx:axisStroke> </mx:AxisRenderer> </mx:verticalAxisRenderers> <mx:series> <mx:ColumnSeries id="cs1" horizontalAxis="{h1}" dataProvider="{SMITH}" yField="close" displayName="SMITH" > <mx:fill> <mx:SolidColor color="{smithColor}"/> </mx:fill> <mx:verticalAxis> <mx:LinearAxis id="v1" minimum="40" maximum="50"/> </mx:verticalAxis> </mx:ColumnSeries> <mx:LineSeries id="cs2" horizontalAxis="{h1}" dataProvider="{DECKER}" yField="close" displayName="DECKER" > <mx:verticalAxis> <mx:LinearAxis id="v2" minimum="150" maximum="170"/> </mx:verticalAxis> <mx:lineStroke> <mx:Stroke color="{deckerColor}" weight="4" alpha="1" /> </mx:lineStroke> </mx:LineSeries> </mx:series> </mx:ColumnChart> <mx:Legend dataProvider="{myChart}"/>

  Read the article

• Why is my PHP query executing twice on page load?

  - by user1826238

  I am newish to PHP and I seem to be having an issue with an insert statement that executes twice when I open this page to view a document. In the database the 2nd insert is 1 second later. It happens in google chrome only and on this page only. IE has no issue, I dont have firefox to check. view_document.php <?php require_once($_SERVER['DOCUMENT_ROOT'] . '/../includes/core.php'); require_once($_SERVER['DOCUMENT_ROOT'] . '/../includes/connect.php'); $webusername = $_SESSION['webname']; if (isset($_GET['document'])) { $ainumber = (int) $_GET['document']; if (!ctype_digit($_GET['document']) || !preg_match('~^[0-9]+$~',$_GET['document']) || !is_numeric($_GET['document'])) { $_SESSION = array(); session_destroy(); header('Location: login.php'); } else { $stmt = $connect->prepare("SELECT s_filename, s_reference FROM dmsmain WHERE s_ainumber = ?") or die(mysqli_error()); $stmt->bind_param('s', $ainumber); $stmt->execute(); $stmt->bind_result($filename, $reference); $stmt->fetch(); $stmt->close(); $file = $_SERVER['DOCUMENT_ROOT'] . '/../dms/files/'.$filename.'.pdf'; if (file_exists($file)) { header('Content-Type: application/pdf'); header('Content-Disposition: inline; filename='.basename($file)); header('Content-Transfer-Encoding: binary'); header('Content-Length: ' . filesize($file)); header('Accept-Ranges: bytes'); readfile($file); $stmt = $connect->prepare("INSERT INTO dmslog (s_reference, s_userid, s_lastactivity, s_actiontype) VALUES (?, ?, ?, ?)") or die(mysqli_error()); date_default_timezone_set('Africa/Johannesburg'); $date = date('Y-m-d H:i:s'); $actiontype = 'DL'; $stmt->bind_param('ssss', $reference, $webusername, $date, $actiontype); $stmt->execute(); $stmt->close(); } else { $missing = "<b>File not found</b>"; } } } ?> My HTTP access records I assume [15/Nov/2012:10:14:32 +0200] "POST /dms/search.php HTTP/1.1" 200 5783 "http://www.denso.co.za/dms/search.php" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11" [15/Nov/2012:10:14:33 +0200] "GET /favicon.ico HTTP/1.1" 404 - "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11" [15/Nov/2012:10:14:34 +0200] "GET /dms/view_document.php?document=8 HTTP/1.1" 200 2965 "http://www.denso.co.za/dms/search.php" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11" [15/Nov/2012:10:14:35 +0200] "GET /favicon.ico HTTP/1.1" 404 - "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.64 Safari/537.11" I have checked my <img src=''> links and I dont see a problem with them. The records indictate there is a favicon.ico request so I created a blank favicon and placed it in my public_html folder and linked it in the page like so <link href="../favicon.ico" rel="shortcut icon" type="image/x-icon" /> Unfortunately that did not work as the statement still executes twice. I am unsure if it is a favicon issue as my upload page uses an insert query and it executes once. If someone could please tell me where I am going wrong or point me in the right direction I would be very grateful

  Read the article

• Apache 2: SetEnvIf "IP Range"

  - by BlaM

  In my Apache config I want to set an environment variable if I see that the visitor comes from an specific IP range. Currently I do it this way: SetEnvIfNoCase Remote_Addr "^194\.8\.7[45]\." banned=spammer-ip SetEnvIfNoCase Remote_Addr "^212\.156\.170\." banned=spammer-ip What I would prefer is something like this: SetEnvIfIpRange 194.8.74.0/23 banned=spammer-ip SetEnvIfIpRange 212.156.170.0/24 banned=spammer-ip ... because I think that converting an IP address to a string and then do an regular expression is a total waste of ressources. I could do an Deny From 194.8.74.0/23 ... but then I don't get a variable that I can check in my 403 error page - to find the reason why access has been denied. Any suggestions what I might miss? Is there an Apache2 MOD that can set environment variables based on "IP Address Ranges"?

  Read the article

• Excel: count number of unique/distinct row in range with condition

  - by Bertvan

  I have a an excel sheet with: in Col A: week numbers in Col B: dates (timesheet entries) I need to know the number of days worked for each week, so I need to the number of unique date entries per week number. I found formula's (both array as non-array) that handle this for a fixed range, but I want to have the results in another column per week number. So, the result of the added dataset below would be (the colon is just for clarity): 14: 2 15: 3 17: 6 20: 2 21: 3 If this is the source data: 14: 4/04/2012 14: 4/04/2012 15: 10/04/2012 15: 10/04/2012 15: 11/04/2012 17: 26/04/2012 17: 26/04/2012 17: 26/04/2012 17: 26/04/2012 17: 27/04/2012 17: 27/04/2012 20: 14/05/2012 20: 14/05/2012 21: 23/05/2012 21: 23/05/2012 21: 25/05/2012

  Read the article

• Triple Monitor Stand Recommendations

  - by Josh W.

  I've got two Acer X233Hbid 23" Widescreen LCD Monitors from new egg back last summer, each weigh 10.5lbs a piece I Want to Buy a third Acer 23" (closest I've found is the X235 on Newegg, weighs in at 11.5 lbs) , one of the new ATI video cards that will output to 3 displays, and then a monitor stand that will let me use them in portrait mode like the image below. I found the following: $260 - ERGOTRON 33-323-200 DS100 Triple-Monitor Desk Stand and was wondering if anyone has any experience with this kind of setup and whether it would work for me or not.. Thanks!

  Read the article

• Server not sending a SYN/ACK packet in response to a SYN packet

  - by jeff

  Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

  Read the article

• Routing to various node.js servers on same machine

  - by Dtang

  I'd like to set up multiple node.js servers on the same machine (but listening on different ports) for different projects (so I can pull any down to edit code without affecting the others). However I want to be able to access these web apps from a browser without typing in the port number, and instead map different urls to different ports: e.g. 45.23.12.01/app - 45.23.12.01:8001. I've considered using node-http-proxy for this, but it doesn't yet support SSL. My hunch is that nginx might be the most suitable. I've never set up nginx before - what configuration do I need to do? The examples of config files I've seen only deal with subdomains, which I don't have. Alternatively, is there a better (stable, hassle-free) way of hosting multiple apps under the same IP address?

  Read the article

• Command-line connect to wired network for Ubuntu

  - by Tim

  I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Location Services are always disabled in Mac OS X Lion

  - by rplusg

  A simple location services program was working fine on my machine and suddenly stopped working. Upon further exploring the problem, I realized that some process has disabled location services in System Preferences » Security & Privacy » Privacy. I checked Enable Location Services, but again it got disabled automatically. After some research I found that it's not just my program, even built-in system functions are also failing because of this problem for example System Preferences » Date & Time » Time Zone failed to get the current location. Every time I check Enable Location Services, I see the following error in the console logs: 16/10/12 11:23:15.636 AM [0x0-0x42042].com.apple.systempreferences: ERROR,Time,372059595.636,Function,"CLInternalSetLocationServicesEnabled",CLInternalSetLocationServicesEnabled failed 16/10/12 11:23:15.638 AM [0x0-0x42042].com.apple.systempreferences: STACK,Time,372059595.636,1 CoreLocation 0x00007fff8f9957be CLInternalSetLocationServicesEnabled + 110 Notes: WiFi is on I didn't install iOS Simulator I use Xcode Version 4.5 (4G182) I use Boot Camp and made my MacBook Pro dual boot (Mac OS X Lion and Windows 7) I do only Mac development but not iOS

  Read the article

• Why am I getting this error in the logs?

  - by Matt

  Ok so I just started a new ubuntu server 11.10 and i added the vhost and all seems ok ...I also restarted apache but when i visit the browser i get a blank page the server ip is http://23.21.197.126/ but when i tail the log tail -f /var/log/apache2/error.log [Wed Feb 01 02:19:20 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs [Wed Feb 01 02:19:24 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs but my only file in sites-enabled is this <VirtualHost 23.21.197.126:80> ServerAdmin [email protected] ServerName logicxl.com # ServerAlias DocumentRoot /srv/crm/current/public ErrorLog /srv/crm/logs/error.log <Directory "/srv/crm/current/public"> Order allow,deny Allow from all </Directory> </VirtualHost> is there something i am missing .....the document root should be /srv/crm/current/public and not /etc/apache2/htdocs as the error suggests Any ideas on how to fix this UPDATE sudo apache2ctl -S VirtualHost configuration: 23.21.197.126:80 is a NameVirtualHost default server logicxl.com (/etc/apache2/sites-enabled/crm:1) port 80 namevhost logicxl.com (/etc/apache2/sites-enabled/crm:1) Syntax OK UPDATE <VirtualHost *:80> ServerAdmin [email protected] ServerName logicxl.com DocumentRoot /srv/crm/current/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /srv/crm/current/public/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

  Read the article

• How to install php soap with rpm packages in centos 6.4 x86_64

  - by HPM

  I want to install php-soap, centos says: [root@LMS-Cent64 soap]# rpm -ivh php-soap-5.3.3-22.el6.x86_64.rpm error: Failed dependencies: php-common(x86-64) = 5.3.3-22.el6 is needed by php-soap-5.3.3-22.el6.x86_64 after installing php-common(x86-64): [root@LMS-Cent64 soap]# rpm -ivh php-common-5.3.3-22.el6.x86_64.rpm Preparing... ########################################### [100%] package php-common-5.3.3-23.el6_4.x86_64 (which is newer than php-common-5.3.3-22.el6.x86_64) is already installed file /usr/lib64/php/modules/phar.so from install of php-common-5.3.3-22.el6.x86_64 conflicts with file from package php-common-5.3.3-23.el6_4.x86_64 What to do now?

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by Mindful

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

  Read the article

• Nothing happen when refreshing the main Frame (JAVA)

  - by Ams

  Hello everyone, I try to show a ( Logged in ) message when a user is succefully connected but nothing happen when a do a repaint(). you can take a look to the code : public class MainFrame extends JFrame implements ActionListener{ private static final long serialVersionUID = 1L; private static final int FRAME_HEIGHT = 400; private static final int FRAME_WIDTH = 250; private static final String TITLE = new String("TweeX"); private static String TWITTERID = new String(); private static String TWITTERPW = new String(); private boolean logged = false; private JTextField loginField = new JTextField(10); private JPasswordField passField = new JPasswordField(10); private JButton login = new JButton("Connect"); private GridBagConstraints c = new GridBagConstraints(); private String UserStatus = new String("Please login..."); /* * Constructor ! */ MainFrame() { setSize(FRAME_WIDTH, FRAME_HEIGHT); setTitle(TITLE); setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); setResizable(false); loginUser(); } /* * Login Forms */ protected void loginUser(){ this.setLayout(new GridBagLayout()); //add Login Fiels + Label c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 0; c.insets = new Insets(5,5,5,20); c.gridy = 0; add(new JLabel("Username:"),c); c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 0; add(loginField,c); //add Password Fiels + Label c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 0; c.gridy = 1; add(new JLabel("Password:"),c); c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 1; add(passField,c); //add Login button c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 2; add(login,c); //add listener to login button login.addActionListener((ActionListener) this); c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 3; add(new JLabel(UserStatus),c); setVisible(true); } @Override public void actionPerformed(ActionEvent e) { TWITTERID = loginField.getText(); TWITTERPW = passField.getText(); Twitter twitter = new TwitterFactory().getInstance(TWITTERID,TWITTERPW); logged = true; try { twitter.verifyCredentials(); } catch (TwitterException e1) { logged = false; } } protected void connect(){ if(logged){ UserStatus = "Loged In :)"; repaint(); } } static public void main(String[] argv) { new MainFrame(); } }

  Read the article

• How to get filename of job in cups?

  - by Grook

  I have printed a couple of files and lpstat shows that they are completed. But the output is something like this: # lpstat -W completed -l Canon-1 root 1086464 Sat May 21 22:47:03 2011 Alerts: job-canceled-by-user queued for Canon Canon-2 root 337920 Mon May 23 20:18:02 2011 Alerts: job-canceled-by-user queued for Canon CanonWin-3 root 17408 Mon May 23 20:29:40 2011 Alerts: job-completed-successfully queued for CanonWin` How can i get names of files which has been printed? P.S. Is there is any bash-script which allows me to get names of all files which has been printed?

  Read the article

• How to access a site in IIS with no DNS mapping

  - by CiccioMiami

  In my IIS 7.5 hosted in a Windows Server 2008 R2 I have several websites with no DNS address assigned. Let's take for instance the site (as named in IIS) with site name mySite. I have for this site the standard binding with no host name. Suppose that my server IP address is, for instance, 101.22.23.01. Therefore it seems logic to me that in order to access the website, I should place in the address bar of my browser: [IP_address]/[sitename] in this case: 101.22.23.01/mySite but it does not work. Shall I specify something else in the bindings?

  Read the article

• how convert this c# cod to php

  - by user3694473

  I'm trying to convert this class from C# to php and i wante to convert this c# class to php ... how i can do it Thanks in advance hi I'm trying to convert this class from C# to php and i wante to convert this c# class to php ... how i can do it Thanks in advance public class CreateCode { public string SazBon(string MM) { string RET = ""; string[] ME = new string[25]; for (int i = 1; i < MM.Length; i += 2) { ME[i] = MM[i - 1].ToString(); } for (int j = 0; j < MM.Length; j += 2) { ME[j] = MM[j + 1].ToString(); } ME[20] = "1"; ME[21] = "OH"; ME[22] = "23"; ME[23] = "fXC"; ME[24] = "5"; ME[5] = ME[14]; ME[13] = ME[23]; ME[2] = ME[22]; ME[18] = ME[21]; ME[23] = ME[11]; ME[19] = ME[0]; foreach (string item in ME) { RET += item; } string BACK = Encrypt(RET, RET, 256); BACK = encryptString(BACK); return BACK; } string encryptString(string strToEncrypt) // md5 { UTF8Encoding ue = new UTF8Encoding(); byte[] bytes = ue.GetBytes(strToEncrypt); MD5CryptoServiceProvider md5 = new MD5CryptoServiceProvider(); byte[] hashBytes = md5.ComputeHash(bytes); // Bytes to string return System.Text.RegularExpressions.Regex.Replace (BitConverter.ToString(hashBytes), "-", "").ToLower(); } private byte[] Encrypt(byte[] clearData, byte[] Key, byte[] IV) { MemoryStream ms = new MemoryStream(); Rijndael alg = Rijndael.Create(); alg.Key = Key; alg.IV = IV; CryptoStream cs = new CryptoStream(ms, alg.CreateEncryptor(), CryptoStreamMode.Write); cs.Write(clearData, 0, clearData.Length); cs.Close(); byte[] encryptedData = ms.ToArray(); return encryptedData; } byte[] A; private string Encrypt(string Data, string Password, int Bits) { byte[] clearBytes = System.Text.Encoding.Unicode.GetBytes(Data); PasswordDeriveBytes pdb = new PasswordDeriveBytes(Password, new byte[] { 0x00, 0x01, 0x02, 0x1C, 0x1D, 0x1E, 0x03, 0x04, 0x05, 0x0F, 0x20, 0x21, 0xAD, 0xAF, 0xA4 }); if (Bits == 128) { byte[] encryptedData = Encrypt(clearBytes, pdb.GetBytes(16), pdb.GetBytes(16)); return Convert.ToBase64String(encryptedData); } else if (Bits == 192) { byte[] encryptedData = Encrypt(clearBytes, pdb.GetBytes(24), pdb.GetBytes(16)); return Convert.ToBase64String(encryptedData); } else if (Bits == 256) { byte[] encryptedData = Encrypt(clearBytes, pdb.GetBytes(32), pdb.GetBytes(16)); return Convert.ToBase64String(encryptedData); } else { return string.Concat(Bits); } } // AES }

  Read the article

• How to schedule a biweekly cronjob?

  - by Roman

  crontab(5) defines the following fields: field allowed values ----- -------------- minute 0-59 hour 0-23 day of month 1-31 month 1-12 (or names, see below) day of week 0-7 (0 or 7 is Sun, or use names) and explains: Step values can be used in conjunction with ranges. Following a range with ``/<number>'' specifies skips of the number's value through the range. For example, ``0-23/2'' can be used in the hours field to specify command execution every other hour (the alternative in the V7 standard is ``0,2,4,6,8,10,12,14,16,18,20,22''). So, no biweekly Jobs, as far as my understanding goes. I'm quite sure there are workarounds, what are yours? Or did I miss something?

  Read the article

• SQLite DB borked when opened on a different machine

  - by pruefsumme

  Hello, I'm using SQLite to store some data. The primary database is on a NAS (Debian Lenny, 2.6.15, armv4l) since the NAS runs a script which updates the data every day. A typical "select * from tableX" looks like this: 2010-12-28|20|62.09|25170.0 2010-12-28|21|49.28|23305.7 2010-12-28|22|48.51|22051.1 2010-12-28|23|47.17|21809.9 When I copy the DB to my main computer (Mac OS X) and run the same SQL query, the output is: 2010-12-28|20|1.08115035175016e-160|25170.0 2010-12-28|21|2.39343503830763e-259|-9.25596535779558e+61 2010-12-28|22|-1.02951149572792e-86|1.90359837597183e+185 2010-12-28|23|-1.10707273937033e-234|-2.35343828462275e-185 The 3rd and 4th column have the type REAL. Interesting fact: When the numbers are integer (i.e. they end with ".0"), there is no difference between the two databases. In all other cases, the differences are ... hm ... surprising? I can't seem to find a pattern. If someone's got a clue - please share!

  Read the article

• FTP Error 550 when trying to access a folder via symbolic link

  - by OrangeTux

  I'm configuring svftp on a linux machine. At the moment local users can login via ftp and they will see listened their home dir. They have write acces to it. No I want the users to write in de /var/www/ dir. Therefore I created an new group apache. Added users to the group and gave the group write access to /var/www. Via the terminal all users can write .var/www/. I created a link in the home directory to /var/www via ln -s /var/www/ /home/user/www ls gives: drwxr-xr-x 2 orangetux orangetux 4096 Jun 23 15:06 ftp lrwxrwxrwx 1 orangetux orangetux 21 Jun 23 15:00 www -> /var/www/ But when I use FTP I see the link but I cannot follow it. Error 550 which means file not found or bad access. How can I solve this, so that the users have access to /var/www via their home dir?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >