Search Results

Search found 855 results on 35 pages for 'arctic shadow'.

Page 24/35 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• ntbackup workalike for adhoc full backups in Windows 7 thats free and preferably open source

  - by Justin Dearing

  On windows 2000 and XP machines I used to be able to do the following: ntbackup backup systemstate c: /f e:\backups\machineName\machineName-full+systemstate_200101206.bkf This gave me a full backup of the system that I could use to do a system restore, after doing a barebones OS install. Windows 7 has a great utility for regular backups with alerting and all that stuff. It does not seem to have command line support. I'd like a backup solution for my Windwos 7 systems that has the following features: Is free Is open source (preferebly) Works while the system is booted and leaves the system functional (clonezilla is great for offline backups, and I use that too) Gives me a backup that is suited for a full system restore or partial system restore (ruling out most imaging software even if they could work while the system is booted via some sort of shadow copy voodoo) Can work via the command line Compression would be nice, the ability to pipe output would be better.

  Read the article

• How to configure ubuntu ldap client to get password policies from server?

  - by Rafaeldv

  I have a ldap server on CentOS, 389-ds. I configured the client, ubuntu 12.04, to authenticate on that base and it works very well. But it don't gets the password policies from server. For example, if i set the policy to force user to change the password on first login, ubuntu ignores it and logs him in, always. How can i setup the client to get the policies? Here are the client files: /etc/nsswitch.conf passwd: files ldap group: files ldap shadow: files ldap hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis sudoers: ldap files common-auth auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_ldap.so use_first_pass auth requisite pam_deny.so auth required pam_permit.so auth optional pam_cap.so common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 default=ignore] pam_ldap.so account requisite pam_deny.so account required pam_permit.so common-password password requisite pam_cracklib.so retry=3 minlen=8 difok=3 password [success=2 default=ignore] pam_unix.so obscure use_authtok try_first_pass sha512 password [success=1 user_unknown=ignore default=die] pam_ldap.so use_authtok try_first_pass password requisite pam_deny.so password required pam_permit.so password optional pam_gnome_keyring.so common-session session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_umask.so session required pam_unix.so session optional pam_ldap.so session optional pam_ck_connector.so nox11 session optional pam_mkhomedir.so skel=/etc/skel umask=0022 /etc/ldap.conf base dc=a,dc=b,dc=c uri ldaps://a.b.c/ ldap_version 3 rootbinddn cn=directory manager pam_password md5 sudoers_base ou=SUDOers,dc=a,dc=b,dc=c pam_lookup_policy yes pam_check_host_attr yes nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,colord,daemon,games,gnats,hplip,irc,kernoops,libuuid,lightdm,list,lp,mail,man,messagebus,news,proxy,pulse,root,rtkit,saned,speech-dispatcher,sshd,sync,sys,syslog,usbmux,uucp,whoopsie,www-data /etc/ldap/ldap.conf BASE dc=a,dc=b,dc=c URI ldaps://a.b.c/ ssl on use_sasl no tls_checkpeer no sudoers_base ou=SUDOers,dc=a,dc=b,dc=c sudoers_debug 2 pam_lookup_policy yes pam_check_host_attr yes pam_lookup_policy yes pam_check_host_attr yes TLS_CACERT /etc/ssl/certs/ca-certificates.crt TLS_REQCERT never

  Read the article

• Efficiently rendering to 3D texture

  - by TravisG

  I have an existing depth texture and some other color textures, and want to process the information in them by rendering to a 3D texture (based on the depth contained in the depth texture, i.e. a point at (x/y) in the depth texture will be rendered to (x/y/texture(depth,uv)) in the 3D texture). Simply doing one manual draw call for each slice of the 3D texture (via glFramebufferTextureLayer) is terribly slow, since I don't know beforehand to what slice of the 3D texture a given texel from one of the color textures or the depth texture belongs. This means the entire process is effectively for each slice for each texel in depth texture process color textures and render to slice So I have to sample the depth texture completely per each slice, and I also have to go through the processing (at least until to discard;) for all texels in it. It would be much faster if I could rearrange the process to for each texel in depth texture figure out what slice it should end up in process color textures and render to slice Is this possible? If so, how? What I'm actually trying to do: the color textures contain lighting information (as seen from light view, it's a reflective shadow map). I want to accumulate that information in the 3D texture and then later use it to light the scene. More specifically I'm trying to implement Cryteks Light Propagation Volumes algorithm.

  Read the article

• Why is my shadowmap all white?

  - by Berend

  I was trying out a shadowmap. But all my shadow is white. I think there is some problem with my homogeneous component. Can anybody help me? The rest of my code is written in xna Here is the hlsl code I used float4x4 xWorld; float4x4 xView; float4x4 xProjection; struct VertexToPixel { float4 Position : POSITION; float4 ScreenPos : TEXCOORD1; float Depth : TEXCOORD2; }; struct PixelToFrame { float4 Color : COLOR0; }; //------- Technique: ShadowMap -------- VertexToPixel MyVertexShader(float4 inPos: POSITION0, float3 inNormal: NORMAL0) { VertexToPixel Output = (VertexToPixel)0; float4x4 preViewProjection = mul(xView, xProjection); float4x4 preWorldViewProjection = mul(xWorld, preViewProjection); Output.Position =mul(inPos, mul(xWorld, preViewProjection)); Output.Depth = Output.Position.z / Output.Position.w; Output.ScreenPos = Output.Position; return Output; } float4 MyPixelShader(VertexToPixel PSIn) : COLOR0 { PixelToFrame Output = (PixelToFrame)0; Output.Color = PSIn.ScreenPos.z/PSIn.ScreenPos.w; return Output.Color; } technique ShadowMap { pass Pass0 { VertexShader = compile vs_2_0 MyVertexShader(); PixelShader = compile ps_2_0 MyPixelShader(); } }

  Read the article

• CodePlex Daily Summary for Thursday, May 22, 2014

  CodePlex Daily Summary for Thursday, May 22, 2014Popular ReleasesTerraMap (Terraria World Map Viewer): TerraMap 1.0.5: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors. Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed installer not uninstalling older versions T...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-2.5.434.0: Issue hot fixed: 102.127666 - Incorrectly formed command EXCEPT () in MDX query for the exclusion of several elements among of the subordinates 102.132877 - Incorrectly generate MDX query with using VisualTotals, the function HIERARCHIZE - should be inside 102.132887 - If in the MemberChoice select an item with child, and then delete one of the child, the parent misses the result build the test project (...\Users\Public\Documents\Ranet.UILibrary.Olap-2.5 Samples\UILibrary.Olap\Cs\Ranet...R.NET: R.NET 1.5.13: R.NET 1.5.13 is a beta release towards R.NET 1.6. You are encouraged to use it now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.13 Changed the nuget packaging to distribute via nuget.org at R.NET Community and R.NET FSharp Utility. Without entering into details, this was necessary to facilitate the distribution of the packages. You are strongly encouraged to use nuget to manage the dependency of your work on R.NET, rather than the bin...Adaptive Access Layers: AAL 2.0: Major rework with breaking changes. Much more flexible registration of implementation strategy and support for methods, properties and events.Google Analytics SDK for Windows 8 and Windows Phone: Google Analytics SDK 1.2.08: Recommended for Xaml/C# developers: Download the package through NuGet. Recommended for JS and C++ developers: Download the new native vsix (Visual Studio SDK) package above. NEW FEATURES & FIXESSee the full list of changes since the last public release SHOUT OUTSDacianMujdar for the pull request to add support for campaigns. aclassen for the pull request to add support for resolved phone models in the WP7 & 8 Silverlight versions. Alan Mendelevich for great open source library PhoneNam...DbSharp: DbSharpApplication (Binary files): A zip file that include DbSharpApplication.exe. Initial release.Multiwfn: Multiwfn 3.3.3: Multiwfn 3.3.3WebExtras: v1.4.0-Beta-1: Enh: Adding support for jQuery UI framework Enh: Adding support for jqPlot charting library Dropping dependency on MoreLinq library Note: Html.LabelForV2(...) extension method has now been deprecated. You should use Html.RequiredFieldLabelFor(...) extension method instead. This extension method will be removed in future versions.????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。MISAO: Ver. 5.4: Fix bugs (Nicovideo viwer add-in) Add Masakari option (Nicovideo viwer add-in)QuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.WordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New Projects<a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a>: <a href="jAvAsCrIpT&colon;alert&lpar;69&rpar;">CLICK HERE TO GET FREE MONEY</a> canopyazure: canopyazureCI&T ULS Log Viewer: Ferramenta para ajudar o desenvolvedor Sharepoint analisar os arquivos de log.EmissorCTE: E uma DLL que ira enviar, receber e cancelar o CTE, também ira fazer geração do DACTEF5 BIG-IP Local Traffic Manager: A .NET wrapper for F5 iControl service-enabled management API.Hydrodesktop Excel-Addin: HydroDesktop ExcelPage Manifest Extractor: Extract a Sharepoint Page Manifest/XMLProject Euler Solutions By multiple1902: Project Euler Solutions in FSharp. By Weisi Dai (multiple1902) <weisi@x-research.com>VerySimpleBackup: Simple command line tool for backup any directory (using Volume Shadow Copy), using archiving (ZIP) with optional password and copy it to FTP (cycle supported).Waf Music Manager: The Waf Music Manager is a simple and fast application that makes fun to manage the local music collection.?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ??????-??????【??】??????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ??????-??????【??】??????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！

  Read the article

• Why is apt-cache so slow?

  - by Damn Terminal

  After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

  Read the article

• Areas of support needed when attempting to roll out a new software system

  In general, I think most people tend to be resistant to new systems or even change because they fear the unknown. Change means that their normal routine will be interrupted until they can learn to conform to the new routine due to the fact that it has transformed to the old routine. In addition, the feeling of failure is also generates a resistance to change. Why would a worker want to move from a process that has worked successfully for them in the past? Their fears over shadow any benefits a change in a new system or business process will bring to their work life. Areas of support needed when attempting to roll out a new software system: Executive/Upper Management Support If there is no support from the top of an organization how will employees be supportive of the new system? Proper Training Employees need to train on a new system prior to its rollout. The more training employee’s receive on any new system will directly impact how comfortable they will be with the system and are more accepting of the change because they can see how the changes will benefit them. Employee Incentives One way to re-enforce the need for employees to use a new system is to offer incentives to ensure that the system will be used. Employee Discipline/Termination If employees are adamantly refusing to use the new system after several warnings then they need to be formally reprimanded.  If this does not work the employer is forced to replace the employees.

  Read the article

• Account not getting completed deleted within linux

  - by lbanz

  I've got a nas box running some flavour of linux 2.6.31.8.nv+v2 with an arm processor. It has got a samba share called 'all' that has full read write access to everyone. However one Windows machine cannot access it without prompting for authentication and I found out from the logs that the windows account matches a local account on the nas box. What I then went to do is delete the local account on the nas. I can see that /home,/etc/password + /etc/shadow the account doesn't exist anymore. However the samba logs, shows that it thinks it is still there as it says account is disabled. I've tried rebooting both nas + windows box. Is there somewhere else that it stores account information? I logged on with a different account on that Windows machine and I can access the share fine. The smb logs shows that it can't find the user and then allows anonymous access.

  Read the article

• Trouble with backup on SBS2008

  - by MemLeak

  We have an SBS2008 installation, which has a backup task. It creates a backup twice a day onto external storage. This worked for a long time. But the backup can't be performed now. The last valid backup was before some Exchange updates, SBS Update Rollup 8 and SharePoint updates were installed. The only error in Event Logs is for VSS (the Volume Shadow Service), which I only have in German. Things I've done: restart the server chkdsk /r /f for all volumes restart the VSS service googling manual backup Nothing's helped. How can I set up the backup again?

  Read the article

• How do I improve terrain rendering batch counts using DirectX?

  - by gamer747

  We have determined that our terrain rendering system needs some work to minimize the number of batches being transferred to the GPU in order to improve performance. I'm looking for suggestions on how best to improve what we're trying to accomplish. We logically split our terrain mesh into smaller grid cells which are 32x32 world units. Each cell has meta data that dictates the four 256x256 textures that are used for spatting along with the alpha blend data, shadow, and light mappings. Each cell contains 81 vertices in a 9x9 grid. Presently, we examine each cell and determine the four textures that are being used to spat the cell. We combine that geometry with any other cell that perhaps uses the same four textures regardless of spat order. If the spat order for a cell differs, the blend map is adjusted so that the spat order is maintained the same as other like cells and blending happens in the right order too. But even with this batching approach, it isn't uncommon when looking out across an area of open terrain to have between 1200-1700 batch count depending upon how frequently textures differ or have different texture blends are between cells. We are only doing frustum culling presently. So using texture spatting, are there other alternatives that can reduce the batch count and allow rendering to be extremely performance-friendly even under DirectX9c? We considered using texture atlases since we're targeting DirectX 9c & older OpenGL platforms but trying to repeat textures using atlases and shaders result in seam artifacts which we haven't been able to eliminate with the exception of disabling mipmapping. Disabling mipmapping results in poor quality textures from a distance. How have others batched together terrain geometry such that one could spat terrain using various textures, minimizing batch count and texture state switches so that rendering performance isn't negatively impacted?

  Read the article

• Realtime file-level mirroring from local NTFS to network drive

  - by hurfdurf

  We have some data collection machines running WinXP. After a new file is written, we would like to immediately copy the new file to network storage (a NetApp CIFS share) automagically. We need realtime or near realtime copies generated (copy upon filehandle close would be fine -- these are not long-running system logs). Two commercial applications I've found so far are MirrorFile and IBM's Tivoli CDP. Are there any reliable open source programs or simple ways to get Shadow Copy to do something similar? Bonus points if it runs as a service.

  Read the article

• Creating disk snapshots in Windows 7

  - by Puneet Arora

  Does anyone know of a command or tool to create disk snapshots on Windows 7 (client SKU)? I see vssadmin.exe has a "create shadow" option, but that's available only on server SKUs: http://technet.microsoft.com/en-us/library/cc788055(v=ws.10).aspx I've a backup tool that replicates changes (creations, modifications and deletions to files and directories) since last backup, to my backup volume. Before each time this happens I want to create a persistent snapshot on my backup volume. I could then mount previous snapshots to view previous backups achieving a behavior similar to that of TimeMachine in OS X. This question has been asked before but unfortunately there weren't any good answers: Taking snapshots of filesystem/volume in Windows 7?

  Read the article

• Accessing a storage-side snapshot of a cluster-shared volume

  - by syneticon-dj

  From time to time I am in the situation where I need to get data back from storage-side snapshots of cluster shared volumes. I suppose I just never figured out a way to do it right, so I always needed to: expose the shadow copy as a separate LUN offline the original CSV in the cluster un-expose the LUN carrying the original CSV make sure my cluster nodes have detected the new LUN and no longer list the original one add the volume to the list of cluster volumes, promote it to be a CSV copy off the data I need undo steps 5. - 1. to revert to the original configuration This is quite tedious and requires downtime for the original volume. Is there a better way to do this without involving a separate host outside of the cluster?

  Read the article

• Rendering design. How can I effectively deal with forward, deferred and transparent rendering?

  - by user1423893

  I have many objects in my game world that all derive from one base class. Each object will have different materials and will therefore be required to be drawn using various rendering techniques. I currently use the following order for rendering my objects. Deferred Forward Transparent (order independent) Each object has a rendering flag that denotes which one of the above methods should be used. The list of base objects in the scene are then iterated through and added to separate lists of deferred, forward or transparent objects based on their rendering flag value. The individual lists are then iterated through and drawn using the order above. Each list is cleared at the end of the frame. This methods works fairly well but it requires different draw methods for each material type. For example each object will require the following methods in order to be compatible with the possible flag settings. object.DrawDeferred() object.DrawForward() object.DrawTransparent() It is also hard to see where methods outside of materials, such as rendering shadow maps, would fit using this "flag & method" design. object.DrawShadow() I was hoping that someone may have some suggestions for improving this rendering process, possibly making it more generic and less verbose?

  Read the article

• What is needed for 'Previous Versions' to be visible on the client OS?

  - by Zoredache

  I have servers with Shadow Copies enabled taking snapshots a couple times a day. From the server, if you look at the local devices you can see the Previous Versions being populated reliably. But from remote clients, the ability for an end-user to see the Previous Versions seems to be very hit-or-miss. For the sake of this question you can assume that all my clients are Windows 7 and the Servers are Windows Server 2008 R2. Is there an exhaustive list of everything that is required for end user to see Previous Versions? Are their any requirements for a certain level of share or filesystem permissions, other then read access? Does something need to be open on the firewall, other then what is already in-place for normal Windows networking?

  Read the article

• Duplication of Windows 7 Backup

  - by Steven Pickles

  I use the built in backup utility for Windows 7 because it's automated and flexible enough to allow me to schedule a daily shadow copy backup of particular files and folders directly to a separate internal RAID 0 array (2 x 1TB). It's also lightweight and stays out of the way. For off-site backup purposes, each week I copy the contents of the internal backup from the RAID 0 array to an external 1 TB drive. I then store move this drive to a different building. The copy from the internal backup to the external backup typically works like this: mount and erase contents of external drive highlight "file" on internal drive, hit CTRL+C CTRL+V on root directory of external drive Is there a better way to synchronize? Microsoft's SyncToy application does a pitiful job, and often leaves the folders not truly synchronized... which completely defeats the ability to use the backup's restore feature.

  Read the article

• Moving cpanel backup of magento site to VPS

  - by user2564024

  I was having my site in shared hosting, I took the entire backup, its structure is like addons homedir mysql resellerpackages suspendinfo bandwidth homedir_paths mysql.sql sds userconfig counters httpfiles mysql-timestamps sds2 userdata cp locale nobodyfiles shadow va cron logaholic pds shell vad digestshadow logs proftpdpasswd ssl version dnszones meta psql sslcerts vf domainkeys mm quota ssldomain fp mma resellerconfig sslkeys has_sslstorage mms resellerfeatures suspended Now I have subscribed to vps, I have copied the files inside homedir/public_html to var/www/html of my new hosting, but am seeing the following error when I view it browser, There has been an error processing your request Exception printing is disabled by default for security reasons. Error log record number: 259343920016 I have just created database with name magenhto inside mysql. Previously I had cpanel and used one click installer. Hence am not aware of how to use that data inside mysql to this new system and are there any more changes.

  Read the article

• Backup all plesk MySQL Databases to individual files

  - by Michael

  Hy, Because I'm new to shell scripting I need a hand. I currently backup all mydatabases to a single file, thing that makes the restore preaty hard. The second problem that my MySQL password dosen't work because of a Plesk bug and i get the password from "/etc/psa/.psa.shadow". Here is the code that I use to backup all my databases to a single file. mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` --all-databases | bzip2 -c > /root/21.10.2013.sql.bz2 I found some scripts on the web that backup each database to individual files but I don't know how to make them work for my situation. Here is a example script: for db in $(mysql -e 'show databases' -s --skip-column-names); do mysqldump $db | gzip > "/backups/mysqldump-$(hostname)-$db-$(date +%Y-%m-%d-%H.%M.%S).gz"; done Can someone help me make the script above work for my situation? Requirements: Backup each database to individual file using plesk password location.

  Read the article

• How best to automatically deal with multiple site_ruby locations?

  - by cclark

  Is there a way to automatically append to $: variable in ruby to account for additional site_ruby locations? Ruby is installed in /usr/local/ and using gem_install will properly install the new ruby files in to /usr/local/lib/ruby/site_ruby. However there are some RPMs for ruby bindings to tools like shadow which we'd like to install and they install to /usr/lib/ruby/site_ruby (no local). Is there a standard way to tell ruby that this directory should also be included by default? I know scripts could dynamically update $: or they could be called with -I but it seems like this is something that should be handled in the install. Has anyone else found a clean way around this kind of problem? thanks, chuck

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• Pros and Cons of Facebook's React vs. Web Components (Polymer)

  - by CletusW

  What are the main benefits of Facebook's React over the upcoming Web Components spec and vice versa (or perhaps a more apples-to-apples comparison would be to Google's Polymer library)? According to this JSConf EU talk and the React homepage, the main benefits of React are: Decoupling and increased cohesion using a component model Abstraction, Composition and Expressivity Virtual DOM & Synthetic events (which basically means they completely re-implemented the DOM and its event system) Enables modern HTML5 event stuff on IE 8 Server-side rendering Testability Bindings to SVG, VML, and <canvas> Almost everything mentioned is being integrated into browsers natively through Web Components except this virtual DOM concept (obviously). I can see how the virtual DOM and synthetic events can be beneficial today to support old browsers, but isn't throwing away a huge chunk of native browser code kind of like shooting yourself in the foot in the long term? As far as modern browsers are concerned, isn't that a lot of unnecessary overhead/reinventing of the wheel? Here are some things I think React is missing that Web Components will care of. Correct me if I'm wrong. Native browser support (read "guaranteed to be faster") Write script in a scripting language, write styles in a styling language, write markup in a markup language. Style encapsulation using Shadow DOM React instead has this, which requires writing CSS in JavaScript. Not pretty. Two-way binding

  Read the article

• Syncronize Linux /etc/ directory

  - by entend

  I have virtual machine with Linux (Ubuntu server) which is used as prototype for other machines. Sometimes I make changes in prototype system and want to import this changes at some other machine. I know about Puppet, cfengine and FAI but want something easy for example rsync script which will work through ssh when it needed. Main goal is /etc/ directory. But I don't want to syncronize some private files for example /etc/passwd /etc/shadow and so on. I don't know all of it. Are there tips for my task ? May be someone have such rsync script.

  Read the article

• Remote Assist Windows 2008 R2 Session

  - by cbergman

  As mentioned in this kb article, it is not possible to shadow a session with multiple monitors enabled. It does mention that "Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality." My question is, is it possible (and if so, how) to remote assist a terminal services session. We have a few Windows Server 2008 R2 Terminal Servers running with about 10 or so users that use 2 monitors. It would be ideal to be able to remote into their session but have yet to find a viable solution. Thank you.

  Read the article

• How to pre-load all deployed assemblies for an AppDomain

  - by Andras Zoltan

  Given an App Domain, there are many different locations that Fusion (the .Net assembly loader) will probe for a given assembly. Obviously, we take this functionality for granted and, since the probing appears to be embedded within the .Net runtime (Assembly._nLoad internal method seems to be the entry-point when Reflect-Loading - and I assume that implicit loading is probably covered by the same underlying algorithm), as developers we don't seem to be able to gain access to those search paths. My problem is that I have a component that does a lot of dynamic type resolution, and which needs to be able to ensure that all user-deployed assemblies for a given AppDomain are pre-loaded before it starts its work. Yes, it slows down startup - but the benefits we get from this component totally outweight this. The basic loading algorithm I've already written is as follows. It deep-scans a set of folders for any .dll (.exes are being excluded at the moment), and uses Assembly.LoadFrom to load the dll if it's AssemblyName cannot be found in the set of assemblies already loaded into the AppDomain (this is implemented inefficiently, but it can be optimized later): void PreLoad(IEnumerable<string> paths) { foreach(path p in paths) { PreLoad(p); } } void PreLoad(string p) { //all try/catch blocks are elided for brevity string[] files = null; files = Directory.GetFiles(p, "*.dll", SearchOption.AllDirectories); AssemblyName a = null; foreach (var s in files) { a = AssemblyName.GetAssemblyName(s); if (!AppDomain.CurrentDomain.GetAssemblies().Any( assembly => AssemblyName.ReferenceMatchesDefinition( assembly.GetName(), a))) Assembly.LoadFrom(s); } } LoadFrom is used because I've found that using Load() can lead to duplicate assemblies being loaded by Fusion if, when it probes for it, it doesn't find one loaded from where it expects to find it. So, with this in place, all I now have to do is to get a list in precedence order (highest to lowest) of the search paths that Fusion is going to be using when it searches for an assembly. Then I can simply iterate through them. The GAC is irrelevant for this, and I'm not interested in any environment-driven fixed paths that Fusion might use - only those paths that can be gleaned from the AppDomain which contain assemblies expressly deployed for the app. My first iteration of this simply used AppDomain.BaseDirectory. This works for services, form apps and console apps. It doesn't work for an Asp.Net website, however, since there are at least two main locations - the AppDomain.DynamicDirectory (where Asp.Net places it's dynamically generated page classes and any assemblies that the Aspx page code references), and then the site's Bin folder - which can be discovered from the AppDomain.SetupInformation.PrivateBinPath property. So I now have working code for the most basic types of apps now (Sql Server-hosted AppDomains are another story since the filesystem is virtualised) - but I came across an interesting issue a couple of days ago where this code simply doesn't work: the nUnit test runner. This uses both Shadow Copying (so my algorithm would need to be discovering and loading them from the shadow-copy drop folder, not from the bin folder) and it sets up the PrivateBinPath as being relative to the base directory. And of course there are loads of other hosting scenarios that I probably haven't considered; but which must be valid because otherwise Fusion would choke on loading the assemblies. I want to stop feeling around and introducing hack upon hack to accommodate these new scenarios as they crop up - what I want is, given an AppDomain and its setup information, the ability to produce this list of Folders that I should scan in order to pick up all the DLLs that are going to be loaded; regardless of how the AppDomain is setup. If Fusion can see them as all the same, then so should my code. Of course, I might have to alter the algorithm if .Net changes its internals - that's just a cross I'll have to bear. Equally, I'm happy to consider SQL Server and any other similar environments as edge-cases that remain unsupported for now. Any ideas!?

  Read the article

• jQuery pop up problems

  - by user327137

  Hi all, I am creating a site from a template i purchased from TM for a beauty salon! I want to create an online booking form with the validations of name number service type but i'm having trouble getting a link to open that will pop up also using jquery NOT html how do i fix this... what is the code i have to insert so that when you click "BOOK NOW" a jquery pop up appears in the centre of the page and it has a booking form on it.... i have googled and googled but it is all new to me as in a NOOB at jquery.... here is a live demo of the template (template link for demo http://osc4.template-help.com/wt_31562/index.html#) and here is the code for where i am trying to place a pop up jquery <dt class="dt3"><a href="#"></a><img src="images/shadow.png" alt="" class="shadow"></dt> <dd id="page3"> <div class="inner"> <div class="content"> <section class="col-1"> <h2>our services</h2> <p>Vintage Beauty</p> <p class="dark">We offer Free Consultation for Botox, Fillers, Medical Skin Peels, Cosmetic Surgery <br> & also specialise n body and skin care. </p> <img src="images/page2-img1.png" alt="" class="p2"> <a href="#" class="more">view more</a> </section> <section class="col-2"> <h2>services</h2> <ul class="list p2"> <li><a href="#">Fish Pedicures</a></li> <li><a href="#">Manicures</a></li> <li><a href="#">Pedicures</a></li> <li><a href="#">Waxing</a></li> <li><a href="#">Threading</a></li> <li><a href="#">Tanning</a></li> <li><a href="#">Body Massage</a></li> <li><a href="#">Nail/Eye Extensions</a></li> <li><a href="#">Eye Lash/Brow Tinting</a></li> <li><a href="#">Twinkle Toes</a></li> <li><a href="#">Teeth Whitening Kits</a></li> <li><a href="#">Hot Wax Specialists</a></li> </ul> **<a href="#" class="more">BOOK ONLINE NOW</a> </section>** </div> </div> </dd>

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >