Search Results

Search found 1163 results on 47 pages for 'channels'.

Page 24/47 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Dell XPS 710 - Boot Device Not Available

    - by WilliamKF
    Recently I was gifted a Dell XPS 710 tower running WinXP SP3. It was running fine until today when I restarted and received a blue screen and the error "unmountable boot volume". In order to fix this issue I've attempted to boot from the Windows XP CD and run chkdsk. However when I attempt to boot from the CD drive I get a "Boot Device not Available" error. Next I made a bootable USB flash drive, but receive the same error as the CD drive. The BIOS recognizes the CD and flash drives, and they appear in the boot device list, but neither will boot. I've attempted to resolve this by re-arranging the boot order in the BIOS and switching IDE channels/setting jumpers on the drives themselves, to no effect. I cannot move the hard drive to another machine because the XPS is the only one that supports SATA drives.

    Read the article

  • squeaky sound when in 5.1 mode Audigy2 ls

    - by ageis23
    Hi I'm using alsa in 5.1 mode. pcm.ch51dup { slave.pcm surround51 slave.channels 6 type route ttable.0.0 1 ttable.1.1 1 ttable.0.2 1 ttable.1.3 1 ttable.0.4 0.5 ttable.1.4 0.5 ttable.0.5 0.5 ttable.1.5 0.5 } The 5.1 mode works but I get sqeaky sound in one of the speakers but it's not there once I turn it back into stereo mode and turn on the matrix mode. The speakers are the Logitech X-540. I do have onboard sound but I've disabled via the sound preferences applet in gnome I'm using a Audigy2 ls with ubuntu lucid. Why is this? The asoundrc is the only file I've played with. I enable 5.1 using the sound preferences applet provided by gnome.

    Read the article

  • How do I configure Shrewsoft's VPN client to only route traffic to a certain IP address through the VPN?

    - by dommer
    We're using Shrewsoft's VPN client to connect to a third party development server. However, it seems to be configured to send all or nothing through the VPN. The devs have to disconnect from the VPN to get email/internet access back. The server that needs to be accessed via the VPN is on a specific (local - 10.x.x.x) IP address and a specific ports. Can we configure the Shrewsoft client application to only route traffic to that one address and/or port through the VPN and to route anything else though the usual channels? If so, how is it done? I'm not a VPN specialist and the options are confusing. In the absence of any Shewsoft VPN client specific advice, what should I be search for? Split tunnels?

    Read the article

  • Does a bad Internet connection increase bandwidth usage?

    - by Synetech
    My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

    Read the article

  • What is causing my internet to be slow on one laptop but not the other and only at a distance?

    - by Matt Case
    I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

    Read the article

  • Why is the pavucontrol level indicator jumping while nothing plays?

    - by EnterTheLiquidToasterFamily
    The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

    Read the article

  • Does a single LACP channel over multiple switches increase redundancy?

    - by Sirch
    I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

    Read the article

  • Can irssi ignore the 24h dsl-reconnect

    - by mcnesium
    A couple of weeks ago I had to switch my ISP from cable to DSL. Now I have this ridiculous disconnect and reconnect every 24h. It's no big deal insofar as having a new IP address every day, but for one exception. Since I host my irssi screen on a machine inside the LAN, my history gets affected by the reconnect in terms of a topic announcement, the users in each channel, creation date and so on. It's about 10 lines of redundant content every day. This is annoying especially in channels with very little traffic, because you hardly see the actual content in line with the every-day-junk. So I was wondering if I can tell irssi to silently ignore the reconnection details, so that my only meta-content in each channel goes back to "Day changed to ...", like back in the days of cable-internet.

    Read the article

  • ffmpeg error while segmenting

    - by Tommy Ng
    I'm using ffmpeg and segmenter on Ubuntu 10.04 to create the transport stream from flv/h264 video files and then segment the ts segments for ipad streaming. Some ts files show an error with segmenter - Output #0, mpegts, to '29': Stream #0.0: Video: 0x0000, yuv420p, 480x360, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: 0x0000, 0 channels, s16 [mpegts @ 0x11f4ac0]sample rate not set Could not write mpegts header to first output file my ffmpeg command for creating the ts file - ffmpeg -i 1.flv -f mpegts -acodec libfaac -ar 48000 -ab 64k -s 480x360 -vcodec libx264 -b 192k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 200k -maxrate 192k -bufsize 192k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 10 -qmax 51 -qdiff 4 -level 30 -aspect 480:360 -g 30 -async 2 -y 1.ts my segmenter command - segmenter 1.ts 10 1 1.m3u8 path/to/streams/

    Read the article

  • Bsplayer - load audio tracks from external files

    - by torran
    I have a movie file: Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Muxing mode : Container [email protected] Codec ID : V_MPEG4/ISO/AVC Duration : 54mn 13s Bit rate : 3 380 Kbps Nominal bit rate : 3 459 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Resolution : 8 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.153 Stream size : 1.28 GiB (88%) Writing library : x264 core 88 r1471 1144615 Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Codec ID : A_AC3 Duration : 54mn 16s Bit rate mode : Constant Bit rate : 384 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Stream size : 149 MiB (10%) and additional audio files in same folder: .mp3 and .ac3. How can I load them with bsplayer? Right click-audio-audio streams is empty. If i open the movie with media players classic I can switch audio files.

    Read the article

  • Setting font size of Closed Captions on iPhone

    - by forthrin
    Does anyone know if it's possible to control the font size on videos played in the built-in iPhone video player? The subtitles (or "Closed Captions") that are there by default are rather small. None of the attempts below change the font size at all: ffmpeg -y -i in.mkv -i in.srt -map 0:0 -map 0:1 -map 1:0 -vcodec copy -acodec aac -ab 256k -scodec mov_text -strict -2 -metadata title="Title" -metadata:s:s:0 language=eng out.mp4 sudo port install mplayer +mencoder_extras +osd mencoder in.mkv -sub in.srt -o out.mp4 -ovc copy -oac faac -faacopts br=256:mpeg=4:object=2 -channels 2 -srate 48000 -subfont-text-scale 10 -of lavf -lavfopts format=mp4 mp4box -add output.ttxt:hdlr=sbtl:size=50 output.mp4 Should we assume that iOS simply disregards size information, or has anyone ever seen styling of subtitles actually work on iOS? Anyone know how to make this work?

    Read the article

  • Redirect channel to another speaker

    - by stex
    Hi, I'm not sure about the title but don't know how to say it in a clearer way. My Soundcard is a Creative X-Fi and I'm using the Creative console starter. Now I'd like to use my speakers not only for my normal screens but also when using a beamer. Due to my room's geometry, the only place for the beamer's projection is a wall which is right to my normal screens (so the projection would be between the front right and the rear right speaker). Now I'm thinking about redirecting the channels to the correct speakers somehow. As far as I remember, in previous version of creative console starter there was an option to do this (e.g. redirect front left to rear right output channel). Does anyone know how to do this with software? Of course I could install a cable switch, but if there's a way without I'd prefer this :) Thanks in advance.

    Read the article

  • Share the DVB card on windows 7 [closed]

    - by Bashar Kernel
    I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

    Read the article

  • Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

    - by Mark S.
    My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

    Read the article

  • Network tries to reindentify itself now and then

    - by Don Young
    When the computer starts up it connects itself to the router (ZTE 4G router) automatically, but after I have surfed the web for a while, it tries to identify itself, meaning you get that little blue circle next to the little screen at the corner. When browsing it does not cause any problems, but if I'm streaming a video the video will then stop, I'll have to refresh the page to make the video start again. And if I'm playing a game, LoL for example, the game will freeze for about 2 seconds then continue again (due to lost connection to the internet). I have no virus on my computer, although I had before. I have reset my router, restarted my computer, updated my ethernet driver, checked so that the IPv4 is set on automatic and tried different router channels. I have had this router for a few months and the problem just started recently. Here is the ipconfig screen:

    Read the article

  • Is 50% download speed on a wireless G network normal?

    - by Bartlomiej Skwira
    I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

    Read the article

  • Can you downmix Windows 7 sound to mono?

    - by Breandán
    I need my Windows 7 64 bit machine to output mono downmixed sound. Downmixed, not just single channel (I'm deaf in one ear). Is there any possibility to force such behavior. I'm looking for a software solution to mix two channels into one. I know that some media players have this functionality, but I'd like the whole system (ie games, flash applications, etc) to produce downmixed audio. (If none exist then just one for Spotify and Windows Media Player would be handy). Cheers.

    Read the article

  • How does a private intra network connect to the internet?

    - by user24454
    Yesterday I visited the offices of RailTel - a public company in India that provides communication backbone to the Indian Railways, they had a very sophisticated setup of Optical Fiber cables for data transmission. They said that this is a private network for internal use only. Then when I was in the Exchange Office - the main communication office, a place where they actually use those communication channels. They said that we could connect to the Intranet and as well as the Internet! My question is, that how is this possible? How can privately laid optical fibers connect globally? On google, I picked up the term internet exhange? But this has got me confused further, why would a private network want to go to this exchange? Please explain me in very simple terms, how does this all work? If this is just a connection of wires, then why charge so much for little bandwidth? Thanks.

    Read the article

  • Macbook not connecting to WIFI

    - by Model Reject
    I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

    Read the article

  • Can I rent exclusive time on a powerful server running linux? [closed]

    - by Mark Borgerding
    My company is involved in a proposal that requires speed estimates of our software on a server with the latest & greatest processors. This is not the first time we've been in this situation. The servers themselves are too expensive to buy a new one every time, so we end up extrapolating from what we have. There are so many variables: processor generation & speed, memory speed, memory channels, cache configurations; it makes extrapolation difficult and error-prone. Is there a business that rents time on the newest servers? At least part of the time we'd need exclusive access to an otherwise quiescent system either via ssh shell access or unattended batch jobs. I am not looking for general cloud computing services. I don't need much time on the server, but it needs to be exclusive. And the server needs to be pretty cutting edge for a solid basis of estimate.

    Read the article

  • TV Card Problem

    - by MladenB
    I have DVB-T card (CE9500B1) and it doesn't work. I've tried everything I knew (but I don't know much). It doesn't show any problem, but shows "No Signal". I used another TV card USB, found channels, put mine card again, and again nothing. I don't think it's broken, when I put USB in my laptop, it recognizes it. Also, these little lights on USB are never turned on. OS is Win 7. Help, please.

    Read the article

  • PCI IDE Controller

    - by mercutio
    I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

    Read the article

  • FFMPEG settings for Youtube and facebook video uploads

    - by eco_bach
    Can any FFMPEG experts share their preferred settings for video conversion to both Youtube and Facebook? For youtube I am following these guidelines and my video size is 480P @ 24 fps Audio Codec: AAC-LC Channels: Stereo or Stereo + 5.1<br> Sample rate 96khz or 48 khz<br> Video Codec: H.264 Progressive scan (no interlacing)<br> High Profile<br> 2 consecutive B frames<br> Closed GOP. GOP of half the frame rate.<br> CABAC<br> Variable bitrate. No bitrate limit required Color Space: 4.2.0 http://support.google.com/youtube/bin/static.py?hl=en&topic=1728573&guide=1728585&page=guide.cs

    Read the article

  • Fastest Memory (within reason) for a MotherBoard [on hold]

    - by sampson
    I was wondering if it would be OK to use DDR3 3000 memory with Asus Maximus VI Impact MotherBoard, Intel® Core™ i3-4130T Processor and Steamcom's FC8 case The purpose of this machine is for a HTPC (Home Theater Personal Computer) system, only, no gaming. The case is fan less as is the CPU cooling system. Also, would it be worth it, heat wise, to go past the 1600 memory type? I mean, would DDR 3000 make the box that much faster to make it worthwhile? The Processor has a TDP rating of 35 W. The memory specifications for the processor are: Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ Yes The FC8 case's heat displacement system is rated at 95 W TDP

    Read the article

  • How to intercept raw soap request/response (data) from WCF client

    - by JohnIdol
    This question seems to be pretty close to what I am looking for - I was able to setup tracing and I am looking at the log entries for my calls to the service. However I need to see the raw soap request with the data I am sending to the service and I see no way of doing that from the SvcTraceViewer (only log entries are shown but no data sent to the service) - am I just missing configuration? Here's what I got in my web.config: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Verbose" propagateActivity="true"> <listeners> <add name="sdt" type="System.Diagnostics.XmlWriterTraceListener" initializeData="App_Data/Logs/WCFTrace.svclog" /> </listeners> </source> </sources> </system.diagnostics> Any help appreciated! UPDATE: this is all I see in my trace: <E2ETraceEvent xmlns="http://schemas.microsoft.com/2004/06/E2ETraceEvent"> <System xmlns="http://schemas.microsoft.com/2004/06/windows/eventlog/system"> <EventID>262163</EventID> <Type>3</Type> <SubType Name="Information">0</SubType> <Level>8</Level> <TimeCreated SystemTime="2010-05-10T13:10:46.6713553Z" /> <Source Name="System.ServiceModel" /> <Correlation ActivityID="{00000000-0000-0000-1501-0080000000f6}" /> <Execution ProcessName="w3wp" ProcessID="3492" ThreadID="23" /> <Channel /> <Computer>MY_COMPUTER_NAME</Computer> </System> <ApplicationData> <TraceData> <DataItem> <TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Information"> <TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Channels.MessageSent.aspx</TraceIdentifier> <Description>Sent a message over a channel.</Description> <AppDomain>MY_DOMAIN</AppDomain> <Source>System.ServiceModel.Channels.HttpOutput+WebRequestHttpOutput/50416815</Source> <ExtendedData xmlns="http://schemas.microsoft.com/2006/08/ServiceModel/MessageTraceRecord"> <MessageProperties> <Encoder>text/xml; charset=utf-8</Encoder> <AllowOutputBatching>False</AllowOutputBatching> <Via>http://xxx.xx.xxx.xxx:9080/MyWebService/myService</Via> </MessageProperties> <MessageHeaders></MessageHeaders> </ExtendedData> </TraceRecord> </DataItem> </TraceData> </ApplicationData>

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >