Search Results

Search found 1163 results on 47 pages for 'channels'.

Page 23/47 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • VMware networking - PortChannel or not?

    - by dunxd
    My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

    Read the article

  • Disabling weak ciphers on Windows 2003

    - by Kev
    For PCI-DSS compliance you have to disable weak ciphers. PCI-DSS permits a minimum cipher size of 128 bits. However for the highest score (0 I believe) you should only accept 168 bit ciphers but you can still be compliant if you permit 128 bit ciphers. The trouble is that when we disable all but 168 bit encryption it seems to disable both inbound and out bound secure channels. For example we'd like to lock down inbound IIS HTTPS to 168 bit ciphers but permit outbound 128 bit SSL connections to payment gateways/services from service applications running on the server (not all payment gateways support 168 bit only we just found out today). Is it possible to have cipher asymmetry on Windows 2003? I am told it is all or nothing.

    Read the article

  • Why does my audio keep reverting to stereo?

    - by GraemeF
    I have an ASUS P7P55D LE motherboard with onboard sound and I am running Windows 7 64-bit, and I am using the SPDIF output from my motherboard to my receiver. On my receiver I can see which audio channels are in use (i.e. stereo or 5.1) In the audio interface properties I can test DTS Audio and Dolby Digital outputs and both work fine, but when I try to play a game with 5.1 sound (I've tried Left 4 Dead and Dragon Age Origins) it reverts to stereo. I was getting this behaviour with the default Microsoft drivers so I installed the latest from the ASUS website but there is no difference. I notice that in the Advanced tab the Default Format only allows me to choose from various 2 channel formats so maybe that is something to do with it? How can I get 5.1 output all of the time?

    Read the article

  • Are there any Pandora/Slacker like applications to create stations/play lists from personal mp3 library?

    - by Randy K
    I'm interested in having playlists created automatically much in the same way that Pandora and Slacker Radio "create" radio channels. I understand that iTunes has the Genius feature, but this requires that the files have been encoded with iTunes, which is not the case with my music, among other reasons I'm not considering iTunes. I'm running an Windows environment, but would consider Linux options as it would give me a reason to learn more about Linux. In the end the music files and play lists will end up on my Android phone and tablets. Working with Amazon's Cloud Player would be nice, but not required.

    Read the article

  • Share the DVB card on windows 7

    - by Bashar Kernel
    I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

    Read the article

  • Mapping of memory addresses to physical modules in Windows XP

    - by Josef Grahn
    I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

    Read the article

  • Convert swf file to mp4 file using FFMPEG

    - by user1624004
    I now want to show an html5 video on a html page. Now I have an sample.swf file, I want to convert it to .mp4 or .ogg or .webm file. I have tried: ffmpeg -i sample.swf sample.mp4 But I got this error: [swf @ 0000000001feef40] Could not find codec parameters for stream 0 (Audio: pcm_s16le, 5512 Hz, 1 channels, 88 kb/s): unspecified sample format Consider increasing the value for the 'analyzeduration' and 'probesize' options [swf @ 0000000001feef40] Estimating duration from bitrate, this may be inaccurate Guessed Channel Layout for Input Stream #0.0 : mono Input #0, swf, from 'sample.swf': Duration: N/A, bitrate: N/A Stream #0:0: Audio: pcm_s16le, 5512 Hz, mono, 88 kb/s Stream #0:1: Video: mjpeg, yuvj444p, 1024x768 [SAR 100:100 DAR 4:3], 16 fps, 16 tbr, 16 tbn File 'sample.mp4' already exists. Overwrite ? [y/N] y Invalid sample format '(null)' Error opening filters!

    Read the article

  • Building a DVR system for use with custom windows application (video analytics)

    - by Michael
    Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

    Read the article

  • Convert a gray PNG with alpha to a 1-bit black rectanble with 8-bit alpha

    - by jcayzac
    I use a tool to render LaTeX equations as PNG. The resulting images are in RGBA8888 format. I would like to extract the luminance (grayscale from RGB channels, multiplied by the A channel) as my new alpha channel, set the picture fully black, and save the result in Gray1Alpha8 (G1A8) format. So far I've only managed to get G1A4 or G8A8 but not G1A8. Also, the resulting picture looks like it's not multiplied correctly… convert original.png \ \( -clone 0 -alpha extract \) \ \( -clone 0 -clone 1 -compose multiply -composite \) \ -delete 0 +swap -alpha off -compose copy_opacity -composite -colorspace Gray -depth 4 result.png What am I missing?

    Read the article

  • Help: Best way to do a TV-out in 7300GT Nvidia video card?

    - by Martin Ongtangco
    I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

    Read the article

  • Server Fax Farm - Need suggestions, or advice

    - by Mike Curry
    We're Looking at creating a large fax farm via T.38 (Fax over Voip - hundreds of incoming and outgoing faxes) on linux servers, anyone have any suggestions on what is available? All my searches return using Asterisk 1.6.x with a commercial product from Digium called "Fax for Asterisk" (with required purchase of "channels" at $38.00 per channel). There must be an open source project out there I can't seem to find. Suggestions welcome! Here is some additional info: We're using Ubuntu 9.10, and planning to use T.38 If I have missed anything, let me know.

    Read the article

  • PHP 5.2 installation with GD on CentOS 6

    - by Pratik Thakkar
    I am trying to install PHP 5.2.17 on CentOS 6.2. I have downloaded RPMs from http://www6.atomicorp.com/channels/atomic/centos/6/i386/RPMs/ Problem is that the PHP RPM seems to have GD disabled by default. Hence in spite installing php-gd RPM, GD is disabled. Is there any way that I can enable GD. Atomicorp seems to be the only website that has PHP 5.2.17 RPMs. I am not an advanced user to be able to compile PHP. I would appreciate help on this.

    Read the article

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • Aironet 1200's Auto-Channel Feature: When should it be used?

    - by Josh Brower
    In our building we have around 25 1200 series Aironets, with a bit of overlap in some areas. Up until this point, we have had them deployed in alternating 1/6/11 channels, but we are wondering if we would get better performance if we used the auto-channel select feature. In looking around, I have seen comments that this feature should not be used as the WAP does a channel scan only on the radio startup, but I have not found this in any Cisco docs. Anybody have anymore information, or real-world experience with this feature? Thanks! -Josh

    Read the article

  • How to generate a 8 bit per sample wav audio file in VLC

    - by Ahmed safan
    I'm using the following vlc command line to extract first 5 minutes of audio from video file "-I dummy -vvv --no-sout-video --sout-audio --no-sout-rtp-sap --no-sout-standard-sap --ttl=1 --sout-transcode-threads=5 --sout-transcode-high-priority --sout-keep --sout #transcode{acodec=s16l,channels=1,samplerate=8000,ab=64}:std{mux=wav,access=file,dst="c:\dest.wav"} "c:\originalvideo.mpg" --start-time=0 --stop-time=300 vlc://quit"; if ab=64 =64 k bits per second and samples per second=8 k samples then bits per sample=64/8=8 bits per sample but the problem is that the output file always has samples of 16 bits per sample. I know that sample can contain bits from 8 , 16, 24 to 32 bits per sample. i want to get 8 bits per sample file how can this be done ?

    Read the article

  • "Verifying DMI Pool" hang caused by raid array..

    - by Ling
    Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

    Read the article

  • No dialogues can be heard in a movie with a 5.1 audio

    - by Karthikeyan KC
    I recently purchased 'PHILIPS DSP56U' 5.l multimedia system and got it connected with my laptop. All the speakers are connected good and all the channels responded well for the test sounds. The stereo music tracks and other normal movies (stereo) plays good. I'm having a problem with playing a movie with a 5.1 audio track. I can hear the background soundtrack, weapon effects, but I cannot hear the dialogues (which I assume to be a separate track). I'm using VLC to play the movie and it would be grateful if someone help me through this :)

    Read the article

  • Do all the network cards use the same frequency to send signals to wire?

    - by smwikipedia
    I am comparing my cable TV wire to my network wire. In a TV cable wire, different frequencies are used by different TV channels. And since a certain channel use a fixed frequency, I think the only left way to represent different signal is with the carrier wave's amplitude. But what about the network wire? For all the network cards with the same type, do they also use different frequencies to send signals just like TV cable? I vaguely remember that they use frequency adjustment to represent signals. So the frequency should not be a fixed one. So how did all the network cards that sharing the same medium differentiate their own signal from others?

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Use router as external high powered Wi-Fi adapter

    - by skywinder
    I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

    Read the article

  • Make SoX not show output

    - by Ram Rachum
    I'm recording with SoX, and I want to make it not show output at all. When recording, it shows this output: Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:00.68 [00:00:00.00] Out:28.7k [ | ] Clip:0 I tried setting verbosity to 0, but it has no effect. (I'm guessing it's meant for messages other than this.) I don't just want to hide the output, which I could do easily; I want SoX to not generate it in the first place, for performance on a weak computer.

    Read the article

  • Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

    - by Ole Jak
    I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

    Read the article

  • IRC "proxy" for persistent connection between several computers

    - by Zeta Two
    I'm looking for a program that enables me to stay connected to one or more IRC networks and be able to view the log even though I connect from several different computers. I'm thinking about something like a proxy running on a server who always is connected to the servers/channels I want and to which I connect from whichever client I want to use. Does anyone know of a program like this? Edit: Apparently I could be running a IRC session in a shell on a server and connect to this but I would like something more GUI:ish.

    Read the article

  • VMWare Workstation can't read CD/DVD drive

    - by Chris W
    A fresh install of VMWare Workstation 7 (7.1.1 build 282343) on Windows 7 64 bit. When I try to read a CD/DVD from a guest (either to install a fresh guest or to read a CD within an existing VM I get the following error: Cannot connect virtual device ide1:0 because no corresponding device is available on the host. I've tried fiddling with the IDE channels as well as tried SCSI with no joy. What am I missing? I can run ISOs fine but I don't want to have to convert everything to an ISO when I presume that this should just work fine.

    Read the article

  • As a small business about to overhaul infrastructure and go virtual, how can we take advantage of all the features of the QNAP TS-439 Pro II+?

    - by Sally
    Specifically, how can we benefit from these current list of features? We're very new to this and I want to be able to talk intelligently to our IT consultant. VMware Ready Citrix Ready Built-in iSCSI target service Virtual Disk Drive (via iSCSI Initiator) Remote Replication Multi-LUN per Target LUN Mapping & LUN Masking Support SPC-3 Persistent Reservation Support What other products should we compare this QNAP to? I appreciate how informative the site is, but they only seem to sell their products through a small number of channels. Is QNAP well known? TIA!

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >