Search Results

Search found 1897 results on 76 pages for 'colossal paul'.

Page 24/76 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• How do you measure the bandwidth used by a given process after it has completed, on Linux?

  - by Paul

  Is there a way to get a summary of how much bandwidth a given process used on Linux after the process completes? I do not want a monitor, I want something I can look at after the task has completed.. Ideally something like the "time" command or a profiler, but for network usage.

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• Puppet Decentralized Setup

  - by paul.tw

  I want to migrate my existing Puppet setup from master/client to a decentralized solution. I know other solutions, such as Ansible are easier to setup for that purpose, but I really want to stay with Puppet. I found "supply_drop"(https://github.com/pitluga/supply_drop) on github, so I followed the instructions and did the following: rvm gemset create testing rvm use 1.9.3@testing gem install supply_drop The output is the following: [m@ms-MacBook-Pro:~ $ irb 1.9.3-p547 :001 require 'supply_drop' NameError: uninitialized constant Capistrano from /Users/m/.rvm/gems/ruby-1.9.3-p547@testing/gems/supply_drop-0.17.0/lib/supply_drop/tasks.rb:1:in `' from /Users/m/.rvm/rubies/ruby-1.9.3-p547/lib/ruby/site_ruby/1.9.1/rubygems/core_ext/kernel_require.rb:55:in `require' from /Users/m/.rvm/rubies/ruby-1.9.3-p547/lib/ruby/site_ruby/1.9.1/rubygems/core_ext/kernel_require.rb:55:in `require' from /Users/m/.rvm/gems/ruby-1.9.3-p547@testing/gems/supply_drop-0.17.0/lib/supply_drop.rb:10:in `' from /Users/m/.rvm/rubies/ruby-1.9.3-p547/lib/ruby/site_ruby/1.9.1/rubygems/core_ext/kernel_require.rb:135:in `require' from /Users/m/.rvm/rubies/ruby-1.9.3-p547/lib/ruby/site_ruby/1.9.1/rubygems/core_ext/kernel_require.rb:135:in `rescue in require' from /Users/m/.rvm/rubies/ruby-1.9.3-p547/lib/ruby/site_ruby/1.9.1/rubygems/core_ext/kernel_require.rb:144:in `require' from (irb):1 from /Users/m/.rvm/rubies/ruby-1.9.3-p547/bin/irb:12:in `' Since that doesn't work without problems, I was wondering which alternatives are there available to do the same. Do you have any suggestings?

  Read the article

• Postfix (delivery temporarily suspended: conversation with mydomain.net [private/lmtp] timed out while receiving the initial server greeting)

  - by Paul

  I'm running Debian 7.1, Postfix version 2.9.6, Dovecot Version 2.1.7 To set it up I followed mostly this (without the spamass-clamav-greylist bit) I have also got setup smart host relaying via gmail postconf -n reveals: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 milter_default_action = accept mydestination = MyDomain, localhost.net, localhost myhostname = MyDomain.net mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf relayhost = [smtp.gmail.com]:587 smtp_connect_timeout = 120s smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:3000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_transport = lmtp:unix:private/lmtp virtual_uid_maps = static:3000 I am able to send emails to the outside world but all emails sent to me are getting stuck. mailq is showing numerous lines: A69C2414C4 2621 Fri Dec 27 14:57:03 [email protected] (conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] AB78B414BE 3796 Fri Dec 27 14:56:50 [email protected] (delivery temporarily suspended: conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] /var/log/mail.log is showing: Dec 28 09:50:09 hostname postfix/lmtp[10828]: E947C414CD: to=, relay=localhost[private/lmtp], delay=64012, delays=63712/0.25/300/0, dsn=4.4.2, status=deferred (conversation with localhost[private/lmtp] timed out while receiving the initial server greeting) Any help would be greatly appreciated. Thank you

  Read the article

• How many SVN checkouts of my project on google code?

  - by Paul Biggar

  My project uses Google Code. Is there a way to find out how many checkouts there have been?

  Read the article

• Need For Speed Shift

  - by Paul

  My processor is an Intel Pentium D 3.0GHz, 1 GB of ram..Can i install and play Need For Speed Shift?

  Read the article

• Lexmark C532 error code won't go away

  - by Paul Phillips

  I can't get rid of error code 84 - Yellow PC unit missing. I've just replaced all 4 photoconductors with genuine Lexmark parts and now the error code keeps appearing. I've swapped the PC units around so know it's not a faulty unit. I've followed the suggestions in the online Lexmark manuals and even called the Lexmark helpline but to no avail. any suggestions? Printer was fine until it gave me a PC unit life warning and I renewed them. Thanks.

  Read the article

• I'm having problems restarting httpd server due to segfault in libapr

  - by Paul

  My httpd server has stopped working, within /var/log/messages I got the following error: May 10 08:08:30 linuxbox kernel: httpd[25353]: segfault at b7fb7991 ip 009ca63b sp bfec3d50 error 7 in libapr-0.so.0.9.12[9af000+1f000] Can anyone shed light on how to fix this, i've tried ghosting the drive, then removed apr and re-installed, but the error keeps coming up.

  Read the article

• Working around Gmail mailing-list “feature.”

  - by Paul J. Lucas

  I'm using Google Apps for my domain's e-mail via IMAP. Whenever I send mail to a mailing list, I don't receive a copy of my own mail back in my inbox. According to Google, this is a "feature." Is there a way to disable this "feature" so that all mail I send to mailing lists appears in my inbox just like all other e-mail? Perhaps something along the lines of this method for disabling Google's spam filter??

  Read the article

• ${extension} empty after catch-all alias in Postfix

  - by Paul Wagener

  I want a setup where an e-mailaddress like [email protected] redirects mail to the folder foo. I've already got dovecot configured and tested. It is called by postfix with this line in master.cf: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -n -m ${extension} I expect ${extension} to expand to 'foo' but it is always empty. I've added recipient_delimiter = + to my main.cf. How can I get it to work? Update: I've got a catch-all alias that redirects @domain.com to [email protected]. It seems that the extension is empty because of this. So the question becomes: Can I have a catch-all so that [email protected] redirects to [email protected] without explicitly defining either the random or the ext part?

  Read the article

• Running IIS command on remote server via Powershell

  - by Paul Hunt

  I am trying to check if an IIS application pool exists on a remote server using a PowerShell script. The command I am running is: test-path "IIS:\AppPools\DefaultAppPool" If I run this script directly on the IIS server in question I get a response back of "True" so this tells me that I have IIS management correctly configure in PowerShell. However when I run the following script from a remote server I get a response of "False" invoke-command -ComputerName IISSERVER -ScriptBlock { test-path "IIS:\AppPools\DefaultAppPool" } I know that PowerShell remoting is correctly configured because I can run the following command and get a list of files invoke-command -ComputerName IISSERVER -ScriptBlock { get-childitems "c:\" } So why am I getting the wrong response about the existence of the application pool?

  Read the article

• Can a faulty battery cause a laptop to crash?

  - by Paul Johnson

  After replacing a blown out motherboard, my Toshiba Satellite C600 is still malfunctioning lately: BSODs. Distorted graphics, and freezes. Sudden shutdowns. After removing the battery and doing a re-format the laptop works perfectly (I should mention the problems continued before removing the battery after the re-format). I haven't seen a fault while solely running on A/C power for two days. Could the problem be a faulty battery?

  Read the article

• How can I prevent Firefox from storing a 10 MB places database file in my Windows roaming profile?

  - by Paul D. Waite

  On my work PC, Firefox stores a 10 MB file called places.sqlite in my roaming profile: C:\Users\MY_USERNAME\AppData\Roaming\Mozilla\Firefox\Profiles\PROFILE_ID\places.sqlite I don't use any location-related features in Firefox, and this file causes my roaming profile to be larger than my company allows (25 MB), meaning I get warnings about my profile size every day. Can I stop Firefox storing this file in my roaming profile?

  Read the article

• Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

  - by Paul D'Ambra

  I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a server offsite and want to set up RRAS to use a persistent connection to the VPN so that it can carry out network jobs even with no one logged in (I'm using it for Micorosft DPM secondary backup). If I create a vpn as if I were setting up a users laptop it can dial in no problem but if I set up a demand dial interface in RRAS it errors. I enable RRAS ticking only demand dial interface (branch office routing) Select network interfaces, right click and choose new demand dial interface Name the VPN ToCompany Select connect using VPN And then L2TP as the vpn type enter the IP address (double-checked for typos!) select Route IP packets on this interface specify static route to remote network as 10.0.0.0/24 with metric of 1 add dial out credentials (again double checked for typos and confirmed with other vpn connections click finish now I right-click on the new interface and choose properties and then the security tab I change Data encryption to optional select only PAP for Authentication (both as per manufacturer of Zywall) click advanced settings against type of vpn and set shared secret then I select the new interface, right-click and choose connect this dials and then errors with either 720 or 811 as the error codes. However, if I create a VPN by going to Network & Sharing center and setting up as if I was creating a VPN from my laptop to the office (say) it dials successfully so I know the VPN settings are correct and the machine can connect to the VPN. Suggests very strongly the problem is how I'm setting up RRAS. Can anyone help?

  Read the article

• Running resize2fs on /

  - by Paul Steckler

  I'm trying to resize an ext4 filesystem on a Fedora 11 box. Using fsdisk and lvm, I was able to grow the partition and logical volume containing the filesystem. When I try to run resize2fs on the device containing the filesystem (/dev/sda2 in this case), I get: "Device or resource busy while trying to open /dev/sda2, Couldn't find valid filesystem superblock" I've tried this from a rescue disk that doesn't have the filesystem mounted, no joy. Maybe resize2fs doesn't know about ext4?

  Read the article

• Sound Card Problem?

  - by Paul

  I bought a new sound card because my built in sound card did not function. When i open youtube, media player or anything that can create a sound my computer will hang up and sometimes when i start my computer it will hang when the windows xp sound will activate.. Help me pls ASAP

  Read the article

• SQL Server Management Studio Connect to Server List Editing

  - by Paul Farry

  I'm using SQLServer Management Studio (2005) and I have a fairly lengthy list of servers in there, and I'd like to get rid of some of them that are no longer in use, without having to set them all up again. I know that the C:\Users\*\AppData\Roaming\Microsoft\Microsoft SQL Server\90\Tools\Shell\mru.dat can be deleted and this will remove ALL the entries, but is there anyway to just delete some of them? (Coding info) I looked at the file and it is a serialised blob from the Microsoft.SqlServer.Express.ConnectionDlg.dll (Class Personalization) in the Appplication directory, but all the methods are private. So I can't just create an instance of this and then call Remove on the entries. Update I have written an Article on CodeProject explaining How this can be achieved. http://www.codeproject.com/KB/vb/AlterSQL2005MRU.aspx

  Read the article

• Which MAC address is the right one?

  - by Paul Dinh

  Result by 'getmac': C:\>getmac Physical Address Transport Name =================== ========================================================== 72-03-C6-48-59-34 \Device\Tcpip_{8AEB3263-18C4-449E-A80F-BC2541DDC2A9} 00-21-9B-D5-6F-EE \Device\Tcpip_{C2F9CE19-D68F-4105-9766-45CBE6D82331} 00-22-68-D2-9B-F7 \Device\Tcpip_{A2701130-9221-43FE-8F14-7B1114F84DC3} Result by 'ipconfig /all': C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : xps-m1530 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-68-D2-9B-F7 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.246.4 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Eth ernet Controller Physical Address. . . . . . . . . : 00-21-9B-D5-6F-EE Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.112 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 8.8.4.4 Lease Obtained. . . . . . . . . . : 01 November 2012 9:00:36 AM Lease Expires . . . . . . . . . . : 04 November 2012 9:00:36 AM There is a MAC address on the back of my laptop, but the sticker is no longer there. So I use the 'getmac' command to get the MAC addresses. But which address shown by 'getmac' above is the one matching the MAC in the sticker on the back of my laptop? Or am I mistaken something? 00-21-... is the ethernet adapter, 00-22-... is the wireless adapter, and 72-03-... is what?

  Read the article

• Firefox Not responding - Windows 7

  - by Paul

  Have just upgraded from Vista to Win7 (32 bit). On vista Firefox worked great. I am using 3.5.6 version. 2GB RAM. In windows 7 however whenever i click on a link, field or tab within the browser or various other places within firefox 'Not Responding' flashes on the title bar. Most of the time i have to click 2 or 3 times to get any link or whatever to work which is very annoying. Any ideas? Can't find anything obvious on google but notice other people get Not Responding messages a lot with various apps. Chrome Plus seems to be fine.

  Read the article

• Building a Data Warehouse

  - by Paul

  I've seen tutorials articles and posts on how to build datawarehouses with star and snowflakes schemas, denormalization of OLTP databases fact and dimension tables and so on. Also seen comments like: Star schemas are for datamarts, at best. There is absolutely no way a true enterprise data warehouse could be represented in a star schema, or snowflake either. I want to create a database that will server for reporting services and maybe (if that isn't enough) install analisys services and extract reports and data from cubes. My question was : Is it really necesarry to redesign my current database and follow the star/snowflake schemas with fact and dimension tables ? Thank you

  Read the article

• Internet keeps getting Disconnected & Reconnected

  - by Paul

  I have an Internet connection thru a Phone company which uses DSL modem to connect. For past few weeks my net connection keeps getting disconnected for few seconds & it reconnects automatically. I asked the service provider & they checked & even replaced some wires but of no help. Funny thing is that sometimes there seems to be a rhythm where it disconnects for an average of 13 seconds or so plus or minus few seconds, for hours at a time. I don't know how to attach an image to this post where it shows the pattern of connect & disconnect. I have taken an image using snagit to show the timing pattern. If someone can explain it, I can attach it here. Thanks

  Read the article

• Automatic layout of manual network mapping

  - by Paul

  So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

• Looking for an easier Skype video chat alternative

  - by Paul

  Is there any software 'easier to use' than Skype - ie to get a video conversation going you have to turn on the computer, make sure the speakers are turned on, make sure the web cam is connected, make sure you click answer with Video... I would like to buy a 'single red button' which does all of the above. - Any recommendations? Update @Eric Koslow comment My original question title was "Is there any software/hardware 'easier to use' than Skype?" So the answer is not necessarily a computer running a program, although it might be. I realise Skype makes a good attempt at helping to ensure speakers and web cam are working and helps you to sort them out if they are not, and for a person who isnt computer phobic this should be enough. However I am interested if there is anything available that is 'easier' than this - ie I'm looking for my 'single' red button. ie the mobile phone with video call maybe the closest answer so far, but I would prefer something as 'free' as Skype is.

  Read the article

• Sendind an internet radio singal from my hifi to a portable

  - by Paul

  I'm just about to set myself up with a wireless network in my house. This is so that I can intregate an internet radio into my hifi system. What I would love to do is to listen to the radio in another room of the house. I also have a little portable radio/cd player that has a USB port on the front. Is there something I could buy which would allow me to listen to the radio through my portable in another room? I do realize that I could solve this problem by buying some wireless portable speakers, however I just wondered if anybody knew another way i.e. bluetooth or something similar?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >