Search Results

Search found 1107 results on 45 pages for 'connector'.

Page 24/45 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• Webcam microphone input in Gnome/pulseaudio

  - by sdaau

  Just got a "Trust" webcam, which gets recognized on my Ubuntu Lucid. It has a built in microphone - which also gets recognized - however, I cannot really get it to act as the system microphone input? Here are some screenshots of what is shown by gnome-volume-control: The default window shows Trust webcam - which has two profiles: "Analog Mono Input" and "Off" - of course, I have it on "Analog Mono Input": However, on the "Input" tab - there is no matching "device for sound input" - neither a matching connector: Then I installed pavucontrol - but that doesn't show that much more; it tells first that gnome-volume-control reads from "Internal Audio Analog Stereo": Then in "Input devices" tab, there is again nothing resembling the mic input from webcam: Finally, under "Configuration" tab, the "Trust" webcam shows, but even if its profile is on "Analog Mono Input", nothing much happens:   So, does anyone know how I could get this webcam microphone to be recognized as the system input? Many thanks in advance for any answers, Cheers!

  Read the article

• How to split audio into multiple channels from optical S/PDIF or 1/8"?

  - by Josh M.

  I have a motherboard which has an optical S/PDIF output or 1/8". I'd like to "split" that signal into the appropriate channels so that I can then connect that to the wires behind my car's headunit which, in turn, run to the amp. The factory Bose amp just takes a single connector with a million wires running out of it, so that's why I would need to separate the signal into separate channels. On the other end there are four RCA connectors: front left, front right, rear left, rear right. The sub-woofer signal does not require an additional connection. Edit: Revised to include S/PDIF or 1/8".

  Read the article

• Microsoft Natural Keyboard 4000, more problematic keys?

  - by Saebin

  So my new motherboard doesn't have a ps/2 connector, so I bought a Microsoft natural keyboard 4000 to replace my old natural keyboard. But, some of the keys stopped working, so I bought another 4000... which then had different keys stop working. I tried cleaning them out, but no go. My guess is some condensation or something fell on it and shorted it out... but if it is that easy to short out, I can't imagine how my old keyboard lasted for years. Did I just get unlucky or are newer keyboards more vulnerable? Any recommendations?

  Read the article

• DVI to VGA adapter only working in one output

  - by Tom Jenkinson

  I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

  Read the article

• Laptop power supplies, does current matter?

  - by CodeSlave

  I have two laptops (same manufacture), with the same type of power connector. However, the power supplies/transformers are slightly different. The output on the first laptop's power supply is 15.6 V at 8.0 A. The output on the second laptop's power supply is 15.6 V at 5A. Clearly the voltages are the same, but the currents are different. I assume the second laptop's power supply can not be used on the first, because it can't supply enough power to the laptop. However, can the first laptop's power supply be safely used on the second laptop?

  Read the article

• How do I record sound from my CD/DVD player without other system sounds in the mix?

  - by Software Monkey

  Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Blackberry Access to Powered Down Exchange

  - by Sam Cogan

  I work with a company (it's more of a charity really) who have a single Exchange Server, with a few Blackberry users, who download emails via POP3 or IMAP. They are in a developing country and so every night they turn off the Exchange server to save power. However, they now want the Blackberry users to be able to get mail at night. They have a Linux server (a rented VPS), so they are considering having the mail delivered here and then pulling this mail via a POP connector into Exchange. Therefore at night, the BES users (who will now be pulling their POP email from the Linux server) can still get their mail. Can anyone think of a better solution to this problem that I may have missed? Unfortunately there is no convincing the company to leave the machine on overnight.

  Read the article

• Is there any way to use devices like mp3 players when they are charging?

  - by GeoB

  The question is simple I think. All we have encounter gagets that they don't fuction while they are in charge, like cameras or mp3 players. But, we know that cell phones or laptops can have full function, when they charge with a charger, like USB connector. Is it in the programming? Why this happens? Can we change that with some device e.g. controlling the charging? I want to use a portable USB charger for my mp3, but I can't wait 3 hours for it to charge, because I cannot listen to music. It notices the charger, and gets in charge mode. Nothing functions until I unplug it. Thanks a lot

  Read the article

• USB keyboard not recognized by motherboard with only a legacy PS/2 header

  - by Luis

  I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

  Read the article

• Using a CF card as an IDE HDD

  - by dartacus

  I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

  Read the article

• Make Exchange 2007 use the correct SSL certificate

  - by Neil

  I have an SBS 2008 server contososerver.contosodomain.local which is externally accessible with the domain remote.contoso.com and an SSL certificate for the external domain which we installed using the SBS 2008 wizard. This works great for OWA because IIS serves the remote.contoso.com certificate. I also want to turn on external POP3/IMAP4/SMTP however when I try, I get served the internal certificate that SBS generated automatically (using its internal CA) which has the alternate names remote.contoso.com, contososerver.contosodomain.local and contososerver. I tried removing this certificate from Exchange but it won't let me because it needs it for its internal receive connector. So how do I tell Exchange 2007 to use the real certificate for external POP3/IMAP4/SMTP?

  Read the article

• Windows Update Fails to install updates

  - by resolver101

  Windows update fails to install the updates below. How do I fix this, I've installed the fix it application Microsoft recommends but it still fails. Any ideas how to fix this? Update for Microsoft Outlook Social Connector 2010 (KB2553406) 32-Bit Edition Update for Microsoft OneNote 2010 (KB2553290) 32-Bit Edition Update for Microsoft Office 2010 (KB2553310) 32-Bit Edition Windows Internet Explorer 9 for Windows 7 for x64-based Systems Update for Microsoft Outlook 2010 (KB2553248) 32-Bit Edition I've also attached the windows update log if that helps. The machine is a Windows 7 and we run a windows 2008 SBS domain.

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• changing the default port no of tomcat in ubuntu

  - by codeomnitrix

  Hii all i am trying to change the port no of my tomcat server installed in ubuntu. for this i have changed the file server.xml and made a change there as: <Connector port="8081" protocol="HTTP/1.1" connectionTimeout="20000" URIEncoding="UTF-8" redirectPort="8443" /> But the problem is that whenever i try to open the localhost:8081 it is working fine but when i tried to open localhost:8080 then it is still accessible. So please explain this why this is happening. Secondly when i made the default port to 80 then localhost:80 or localhost then it was not accessible. So please explain this why this is happening. Thanks in advance.

  Read the article

• Update Billing Email Addresses in Sage MAS90

  - by ThaKidd

  I have been tasked with trying to find a method of updating about 500 customer email addresses in MAS90. I recently discovered that they had the ability to email invoices to their customers and because I opened my big mouth, they now want me to find a way to add about 500 emails into the system so they do not have to perform the task manually. The office does have an SQL server which supports ASP sites which contains a list of all of the current email addresses. My plan was to use Microsoft Access 2007 with the MAS90 ODBC connector to attempt this update. My questions are: Is this the right way to go or is there a better method of obtaining these results? Does anyone happen to know which tables I should be looking at? Any and all help is appreciated. Thanks in advance!

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• System Center 2012 Service Manager change request status stuck at new

  - by Chuck Herrington

  The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

  Read the article

• Why is the pavucontrol level indicator jumping while nothing plays?

  - by EnterTheLiquidToasterFamily

  The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

  Read the article

• Mail Stuck in Backend Exchange Queue

  - by Kyle Brandt

  I have a message that has and is stuck in a queue on my backend mail server. The queue is: Internet Mail SMTP Connector (MY_FRONT_END_SERVER_NAME)-524350ff... It is in state retry with 183 failures. It is only one message and all other mail is flowing. The message is not particularly large. My limited understanding, a guess really, is that this message should get handed off to the front end mail server and sent to the remote hosts for which it is destined, so it should even matter if the remote host is up. However, I can telnet to the smtp provider of that host. How can I find out why it is stuck in this queue, and can I force it out somehow (unfreeze doesn't help me)?

  Read the article

• [Outlook 2007] How to recover the deleted Tasks from a Deleted Profile?

  - by JoshuaD

  Edit: OK. I've found the OST with the tasks in it, but I am unable to import an OST into outlook, it appears it needs to be converted to PST first. Is there anyone who knows a free OST - PST converter or some way to import OSTs directly into outlook? I am using outlook 2007 linked to an MSN email account through outlook connector. I recently added [email protected] (Fake address) to my outlook and deleted [email protected]. I thought my tasks were locally stored seperately from the email address, but it turns out when I deleted [email protected], I also lost all of my tasks. This is catastrophic. Is there any way to recover them? They're not stored on the MSN web account. I figure they must still be somewhere on my computer. I just don't know where to look or how to look there. Thank you.

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• Best alternatives to recover lost directories in FAT32 external hard drive?

  - by Sergio

  I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.).

  Read the article

• Viewsonic Monitor Resolution - Drivers are not working

  - by ravidev

  I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >