Search Results

Search found 1107 results on 45 pages for 'connector'.

Page 22/45 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • Apache load balancer limits with Tomcat over AJP

    - by PAS
    Hi All, I have Apache acting as a load balancer in front of 3 Tomcat servers. Occasionally, Apache returns 503 responses, which I would like to remove completely. All 4 servers are not under significant load in terms of CPU, memory, or disk, so I am a little unsure what is reaching it's limits or why. 503s are returned when all workers are in error state - whatever that means. Here are the details: Apache config: <IfModule mpm_prefork_module> StartServers 30 MinSpareServers 30 MaxSpareServers 60 MaxClients 200 MaxRequestsPerChild 1000 </IfModule> ... <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> # Tomcat HA cluster <Proxy balancer://mycluster> BalancerMember ajp://10.176.201.9:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.201.10:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.219.168:8009 keepalive=On retry=1 timeout=1 ping=1 </Proxy> # Passes thru track. or api. ProxyPreserveHost On ProxyStatus On # Original tracker ProxyPass /m balancer://mycluster/m ProxyPassReverse /m balancer://mycluster/m Tomcat config: <Server port="8005" shutdown="SHUTDOWN"> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost"> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Engine> </Service> </Server> Apache error log: [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.10:8009 (10.176.201.10) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.10) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.10 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.9:8009 (10.176.201.9) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.9) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.9 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.219.168:8009 (10.176.219.168) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.219.168) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.219.168 [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state Load balancer top info: top - 23:44:11 up 210 days, 4:32, 1 user, load average: 0.10, 0.11, 0.09 Tasks: 135 total, 2 running, 133 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 99.2%id, 0.1%wa, 0.0%hi, 0.1%si, 0.3%st Mem: 524508k total, 517132k used, 7376k free, 9124k buffers Swap: 1048568k total, 352k used, 1048216k free, 334720k cached Tomcat top info: top - 23:47:12 up 210 days, 3:07, 1 user, load average: 0.02, 0.04, 0.00 Tasks: 63 total, 1 running, 62 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097372k total, 2080888k used, 16484k free, 21464k buffers Swap: 4194296k total, 380k used, 4193916k free, 1520912k cached Catalina.out does not have any error messages in it. According to Apache's server status, it seems to be maxing out at 143 requests/sec. I believe the servers can handle substantially more load than they are, so any hints about low default limits or other reasons why this setup would be maxing out would be greatly appreciated.

    Read the article

  • iPhone - Outlook 2010 sync'd items

    - by Rob Farley
    I'm not sure if this is a problem with Outlook 2010, or the fact that I don't have an Exchange box, or the fact that I have two MAPI mailboxes (both using Outlook Live Connector), or something else... so let me just describe the situation. iTunes says that I'm sync'ing happily, all the Calendar, Contact items, Notes... and if I have changed several things I get the "you're changing more than 5% of items" warning, persuading me that the sync'ing is working. I just can't find those items on my PC. They're not sync'ing with either of my Live accounts (Calendar or Contacts), and I can't find any track of anything. iTunes says I have Calendar folders called "" and "Calendar", but doesn't show any Contact groups at all. So how do I find out where they're going to... or change where they're going to... or anything?

    Read the article

  • 4.5.1 4.4.0 DNS Query Failed

    - by Justin
    We are running Exchange 2010 and lately I have noticed that some outgoing messages get stuck in the queue with the error "451 4.4.0 DNS Query Failed". On every domain that this happens on I have been able to use nslookup to find the MX record and open a connection to their server over SMTP so I am reasonably sure that this problem is on my end. My send connector isn't routing mail through a smart host nor is is set to use a different DNS server to do the lookup so I'm stumped as to why these messages aren't going out. Any ideas?

    Read the article

  • Why would the Default Gateway constantly require resetting?

    - by Raven Dreamer
    I've had a (mostly) steady internet connection for the past two months. For the last hour, however, my connectivity has been dropping every 10 minutes or so, and must be reset. So far, I've always been able to fix the issue by running Windows network diagnostics (On Windows 7 64 bit), but the lack of constant internet is making it a pain to try and stream video, download games through steam, etc. Windows always reports a fix by "Resetting the Local Area Connector", telling me: Default Gateway Not Available. What's going on? Is the trouble on my end, or with my ISP? (Timewarner Cable) Things I've Tried: Reinstalling the motherboard's LAN drivers Manually setting a default gateway (gets cleared, reverts to default settings) Unplugged (Hard Reset) the router Unplugged / replugged ethernet cable.

    Read the article

  • Replacement Alternative for Dell FY606 in a Poweredge T105

    - by Mike C
    I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

    Read the article

  • Where do SATA drives get their power when using a PCI SATA controller on oler PCs?

    - by Sukima
    I've been looking into PCI SATA controller cards online for an older PC and noticed that the ports only have the SATA cable connector and the Power supply does not have the SATA power connectors. I also had a few external eSATA drives which don't power up unless I also plugin the USB cable. Therefore I realize that SATA and eSATA do not carry power and need power else where. When converting older PCs to use a PCI SATA controller how do you provide power to the SATA drives? Anticipating the answer to be some kind of converter cable (which I was unable to search for) then can older power supplies handle added drives? (Assuming a 4 port SATA controller means 4 more drives the power supply has to endure). Or do you have to get a second poer supply and kinda jerry-rig it into an old case?

    Read the article

  • Set up internal domain to use external SMTP in Exchange 2007

    - by Geoffrey
    I'm moving to Google Apps and have setup dual-delivery. Everything is fine, but for mail sent internally (from [email protected] to [email protected]), Exchange is not using the send connectors I have pointing to Google's servers. I believe my question is similar to this question: How to force internal email through an smtp connector in exchange 2007 Again, if a user is connected to the Exchange server and tries to send to [email protected] it works just fine, but I cannot seem to force *@mydomain.com to route correctly. This should be a fairly simple, but according to this: google.com/support/forum/p/Google+Apps/thread?tid=30b6ad03baa57289&hl=en (can't post two links due to spam prevention) It does not seem possible. Any ideas?

    Read the article

  • MySQL query (over SSL) fails in IIS 7 using default AppPool identity

    - by Jon Tackabury
    I am trying to run a website locally in Windows 7 under IIS 7. I have the AppPool configured to use "Classic" mode, but connecting to a MySQL DB that requires SSL fails. If I change the identity to my user account it works perfectly. It fails when using the default "ApplicationPoolIdentity" account. Is there something I'm missing somewhere? Why would running a MySQL query over SSL fail for certain user accounts? Update: This is the exception that the MySQL Connector is throwing: "Reading from the stream has failed. Attempted to read past the end of the stream."

    Read the article

  • Best alternatives to recover lost directories in FAT32 external hard drive?

    - by Sergio
    Hi: I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.). Regards, Sergio

    Read the article

  • Are there any vendors making a Gigabit Fiber solution for laptops?

    - by romandas
    I'm trying to build a laptop system that can connect to just about any network you might come across in a large enterprise. I realize I can use a media converter to go from twisted pair to fiber but prefer to have a NIC instead of a converter. Is there a vendor out there that actually makes a gigabit ethernet fiber adapter for laptops? Edit: A year after I asked this question, apparently Allied Telesis came out with the AT-2872SX ExpressCard which has an SC connector for Gigabit Ethernet. See syneticon-dj's answer below.

    Read the article

  • Remote servlet by mod_jk ?

    - by marioosh.net
    I have remote servlet for example: h*tps://[ip_address]/servlet (h*tps://[ip_address]/ - Tomcat main page) that i need to configure on local Apache HTTPd server. My mod_jk configuration looks like below, but doesn't work. Something works, because when i type h*tps://localhost/console in a browser i get Tomcat error page "HTTP Status 404 - /console/". JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkMount /console/* ajp13 workers.properties: worker.ajp13.type=ajp13 worker.ajp13.host=[ip_address] worker.ajp13.port=8009 Remote Tomcat is configured good i think - listen on port 8009 and servlet h*tps://[ip_address]/servlet works too. <Connector port="8009" protocol="AJP/1.3" redirectPort="443" /> Anybody helps ?

    Read the article

  • Is it possible to use a laptop charger in other laptop with different specifications?

    - by poz2k4444
    Let's say I have my laptop charger that uses 19.5V and 3.9A and I want to use it in other laptop that has no charger but it needs just 19V and 3.16A, I've studied a little of electtronics and I know that the amperage doesn't affect because the computer will use just the necessary, but I'm not really sure about the voltage. I read this post and I know the polarity is the same and the connector fits, but it doesn't say anything about voltage, I also know if the voltage of the charger were lower than the specification it'll not be a problem, but what about this little almost insignificant difference??

    Read the article

  • Computer won't power on

    - by briskmojo
    Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

    Read the article

  • Are Motherboards for the Acer Aspire One AOA150 Netbook Compatible with the AOA110?

    - by Mindstormscreator
    I have an Acer Aspire One ZG5 AOA110-1588 netbook, and the motherboard doesn't have a port for a SATA 2.5 inch hard drive; it only supports this slow 8GB SSD type drive. Through research I've discovered that the AOA150 motherboards do have a SATA slot, and the bottom plate of these laptops have an appropriate protrusion for the drive to fit in (for example, compare this to this). The AOA110 and AOA150 models are very similar in appearance and specs. I've even seen tutorials that involve soldering a SATA connector onto the AOA110's motherboard, essentially creating an AOA150 motherboard (right?) So, could I just swap out the motherboard in my netbook with the MBS0506001? (I'd post another link to the actual board but can't because of the spam prevention...) I assume I would also need to purchase and replace the bottom cover with a larger one and possibly get a hard drive caddy as well...? Thanks!

    Read the article

  • Relay thru external SMTP server on Exchange 2010

    - by MadBoy
    My client has dynamic IP on which he hosts Exchange 2010 with POP3 Connector running and gathering emails from his current hosting. Until he gets static IP he wants to send emails out. This will work most of the time but some servers won't accept such email sent by Exchange (from dynamic ip due to multiple reasons) so I would like to make a relay thru external SMTP server which hosts current mailboxes. Normally SMTP server could be set up to allow relay thru it but this would require static IP to be allowed on that server so it would know which IP is allowed to relay thru it. Or is there a way to setup relay in Exchange 2010 so it can use dynamic IP and kinda authenticates with user/password itself on the hosted server?

    Read the article

  • "Disk boot failure" error after installing Windows 7 on SSD

    - by Tony_Henrich
    I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

    Read the article

  • WHS - client does not shutdown after backup

    - by justjoshingyou
    I have my WHS/Win 7 laptop configured to do automatic backups through the connector. The backups run just fine every night. I put my computer in hibernate when I go to bed, it wakes and runs the backups, but then it doesn't go back into hibernate or shutdown. I'd like to be able to force it to shutdown after the backups are completed. I don't see a scheduled task in the system for the WHS backups. Any idea how I can get my laptop to shutdown after the backups are complete? Thanks.

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • Short USB cables not charging?

    - by tropolite
    I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

    Read the article

  • connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

    - by Rakesh
    On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • Exchange 2013 Internal Relay via Smart Host

    - by Matt Clements
    Thank you for your help in advance! I am currently setting up an Exchange 2013 server, to replace our old POP3/SMTP system, however we would like to roll this out gradually when convenient for our staff. Our plan is therefore: Setup Exchange 2013 to retrieve email via POP Connector - Done Setup Exchange 2013 to send ALL mail via a SmartHost - Issues I have set the domains in Mail Flow Accepted Domains to Internal Relay, enabled a Smart Host for * as the domain name, and disabled/deleted the accounts that are not setup yet; however Exchange just bounces the emails with no errors.

    Read the article

  • How do I make exchange forward email to a non-exchange mail server (postfix on mac)?

    - by johnny
    Hi, I'm not sure what I'm doing. Exchange has been working a long time. I just installed a mac mail server postfix/dovecot. They both work but not together. If I send email directly to the new server with [email protected], I can send email to the Internet and I can receive email at the [email protected]. But, if I log onto my exchange account with OWA and I put in [email protected] I never receive it and I never get any errors back in OWA or on my mac server logs. It just disappears. On the mac, I thought that as long as I had mail running and had SMTP set to allow incoming email checked it would receive email from anywhere. How can I make my Exchange server send email to the mac box if the email doesn't exist in the exchange server? Is this where I would put a new SMTP connector and a bridgehead using DNS? Thank you for any help.

    Read the article

  • 3.5mm headphone jack -> Component video?

    - by Isaac Waller
    Hello, I have a strange cord that has a male 3.5mm headphone jack on one side, and some component video and audio ouputs on the other. When I plug the headphone side into my computer, and the other side into my TV, I get audio across the cable, but no video. How can I send some video over the headphone jack in OS X? I know you can, because this cable is actually for a Beyblade toy and it somehow transferred video over this cable. Thanks, Isaac I think I found some more information (from Wikipedia:) "A four conductor version (of a 3.5mm headphone jack) is becoming a de facto standard output connector for compact camcorders, providing stereo sound plus a video signal." So how can I do this on Mac?

    Read the article

  • Set up Glassfish connection pool to talk to a database on a Ubuntu VPS

    - by Harry Pham
    On my Ubuntu VPS, i have a mysql server running and a Glassfish 3.0.1 Application Server running. And I am having a hard to have my GF successfully ping the database. Here is my GF set up Assume: x.y.z.t is the ip of my VPS Resource Type: javax.sql.ConnectionPoolDataSource User: root DatabaseName: scholar Url: jdbc:mysql://x.y.z.t:3306/scholar URL: jdbc:mysql://x.y.z.t:3306/scholar Password: xxxx PortNumber: 3306 ServerName: x.y.z.t Inside my glassfish3/glassfish/lib, I have my mysql-connector-java-5.1.13-bin.jar Inside the database, table mysql here is the result of the query select User, Host from user; +------------------+-----------+ | User | Host | +------------------+-----------+ | root | 127.0.0.1 | | debian-sys-maint | localhost | | root | localhost | | root | yunaeyes | +------------------+-----------+ Now from my machine, if I try to connect to this db via mysql browser (mysql client software), well I cant. Well from the table above, seem like it only allow localhost to connect to this db. Keep in mind that both my db and my GF are on the same VPS. Please help

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >