Search Results

Search found 2592 results on 104 pages for 'dell 6224 powerconnect'.

Page 24/104 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Fan always spinning on Maverick

  - by jb

  I use Dell Studio 1555, after update to maverick my fan started spinning full speed allways. I use xserver-xorg-video-ati/radeon drivers because fglrx messes with my desktop resolution when connecting external screen. Processor is mostly idle. U use some desktop effects. On the same configuration on Lucid my fan worked slower. It eats lots of battery time :( Bug filed: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/675156 Any insights how to solve/debug it or work around it?

  Read the article

• Why does my Ubuntu freeze in the middle of something with a blank screen?

  - by mohamed

  I am facing a serious problem as my Dell Optiplex 745 loaded with Ubuntu 12.04 32bit freezes with a blank screen no mouse cursor no keyboard activity in many occasions. Sometimes when I open firefox, or software center, I really can't tell what the main problem is, but what i am certain about is it i have to do a hard reset to reboot. I tried to use a live-cd to boot but it did the same, tried the recovery console but couldn't find a way to fix from there (I am a new user) suspected a hardware problem but windows runs flawlessly so I believe its something related to ubuntu. Specs: Intel Celeron D 3.06 GHZ 3.0 GB ram Intel built in graphics Q965 1 TB HDD Bios Phoenex 2.6.4 Please help I really love ubuntu and I don't want to go back to windows!

  Read the article

• sound card is not working

  - by ralph crowhurst

  I've installed Ubuntu 11.4 on my dell xps m2010 using wubi. Then booted up and could not connect to the Internet using 3three huawei e122 usb mobile broadband (I would like this to work also). I've managed to connect through a wireless network, I went to my favorite sites and was told I needed to install adobe flash player.This what I did players run and picture is good. But there is no sound! Then I've tried to play songs in Banshee, but no sound. I have checked everything in sound preferences including test speaker, there is sound. I have sigmatel sound card. Thanks

  Read the article

• New to Ubuntu - 12.04.1 Kernel Panic on Installation

  - by user88432

  I'm a complete Ubuntu and even Linux newbie. I'm learning here, so I'm grateful for any info to help me learn more about this. I have a Dell Dimension 2400 with a Pentium 4 and 1GB of RAM. It's older but it's only going to be doing some small stuff for me when I get it up and going. I've tried installing several versions of Linux (but I really, really want Ubuntu) and I keep getting a similar kernel panic message. The problem is I don't have a clue what that means or how to begin fixing it. I would appreciate any help to get my machine up and going. I have already tried Installing alternate Ubuntu versions Burning multiple 12.04.1 disks Installing other versions of Linux I have a picture of the screen to share; however, I can't post due to the fact that I don't have enough reputation points on this forum because I'm a newbie. I would be happy to email you a pic, if you think you can help.

  Read the article

• SSD Tweaks for Ubuntu 12.04

  - by Mustafa Erdinç

  I need to tweak my Dell XPS 13z SSD for maximum performance and life cycle than I read the solutions explained here, but it is for 11.10 and my fstab is different. For now my fstab is looks like this: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=abf5ce9e-bdb7-4b2f-a7bd-bbd9efa72a98 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda2 during installation UUID=491427b2-7482-4483-b6eb-7c564b991aff /home ext4 defaults 0 2 # swap was on /dev/sda3 during installation #UUID=7551000d-e708-4e0f-9fd2-9f93119f63fb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 tmpfs /tmp tmpfs mode=1777 And my rc.local is looks like this: echo noop > /sys/block/sda/queue/scheduler echo deadline > /sys/block/sda/queue/scheduler echo 1 > /sys/block/sda/queue/iosched/fifo_batch exit 0 Do you have any suggestions, what should I do? Regards

  Read the article

• the "additional drivers" shows nothing

  - by Yasser al-Zainy

  I started using Ubuntu 32 bit last week. I love it but I recognized there was a problem with the cooling system. the fan doesn't stop and slightly loud all the time (that wasn't the case while running with windows 7). I told a friend who claimed that it should be a drivers problem. My machine is dell inspiron n5110 and the official site recommends win 7 64 bit only. there's no support for linux. (the page showing the machine drivers and system recommendation I tried to fix the problem using the "additional drivers", it opens but it shows nothing (no drivers to activate, just the help and the close buttons) is there a way to fix this?

  Read the article

• How reliable is the battery data in ubuntu the power statistics?

  - by nbubis

  Right now the power statistics show that: Energy when full: 25.5 Wh Energy (design): 93.2 Wh And indeed the battery doesn't seem to be lasting as long as it used too. My question: Is this data reliable? Does it really indicate that I should replace the battery, or could it be the charger, laptop, or OS that is stopping the battery from fully charging? Is any way of validating the battery is indeed to blame? I'd like to be sure before shelling out 90$ for a new battery. (If it helps, the battery is a 3 year old dell 9 cell rated at 90 Wh).

  Read the article

• Why is the Touchpad tab missing?

  - by U47

  So my Dell Vostro 3360 came out of the box with an Alps touchpad which was detected as PS/2. Through these steps, I was able to get as far as it appearing to be recognized as a touchpad. Howevver, I do not get the Touchpad tab in the Mouse/Touchpad settings. Two-finger scrolling appears to work, and the Fn-F3 does disable the touchpad, but the settings are so brutal that it is almost impossible to work with. Very difficult to scroll at all accurately. I'm hoping there's some settings which can be tweaked which will help with this. Any ideas? My xinput listing is as follows: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? GlidePoint Virtual Touchpad id=12 [slave pointer (2)] Thanks,

  Read the article

• How to run Android Applications in Eclipse?

  - by Raahul

  my system is Dell Inspiron 15R (N5010) and i am having trouble becuase of 64 bit system. on running Android Application i am getting error: Error executing aapt. Please check aapt is present at /home/rahul/android-sdks/platform-tools/aapt before this error i was getting adb not found error. i tried to install ia32-libs but can't. i also put my question here (How to install ia32-lib on 64 Bit System?) but nothing helped. please help !!

  Read the article

• How do I disable the "enable/disable wireless" shortcut key on my laptop?

  - by Matthew

  On my Dell Studio XPS 16, I sometimes accidentally hit this key. Wireless becomes disabled, and hitting it again does not re-enable wireless. I have to hit it an odd number of times, then restart my computer to re-enable wireless. I can't imagine a situation in which I would want to disable wireless from my keyboard. Is it possible just disable the key all-together, so I can avoid this problem? On a related note, what package do I file the bug against? I'm happy just disabling the key, but that's really just a workaround.

  Read the article

• Internet stopped working suddenly on 12.04

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the Internet at home anymore. I am only able to access the router, but no Internet access. A have a Dell Latitude E6320 with Ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via Wireless and Ethernet. At home, if I try connecting it through Windows, it does work fine. I even checked the MAC address and it's OK. My other laptop, which also runs Ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependencies. Can anyone help me please? I am afraid, I will have to reinstall everything.

  Read the article

• How do I find a proprietary driver for the Intel graphics card I have?

  - by user69798

  I have an Intel corporation core processor integrated graphics controller (rev 18), and I am trying to get a proprietary driver for my graphics card so I can play Amnesia from the Humble Bundle. I am a female that can easily follow directions but doesn't know much about Linux yet. If you give me precise directions, I will follow them so you can help me fix the problem. I would really appreciate it! My laptop is a Dell n7010. Additional info: I believe that it is the graphics card that is causing Amnesia to crash, but I am unsure. I have tried running it on the lowest possible settings, and it crashes after the first loading screen. :( Also, I installed via the Ubuntu Software Center after purchasing the Humble Bundle. I have not tried the other games yet.

  Read the article

• Alps touchpad detected as a mouse, can't enable/disable multitouch

  - by Shota Bakuradze

  Now I know that this has been asked several times here but I couldn't find any decent solution to it. I am running Ubuntu 12.04 on my DELL N5110 and my touchpad is detected as a mouse, So I don't have the touchpad options availiable. Can't use multitouch and can't disable it either. I have tried the dkms driver from this link. But when I tried to install it with dpkg -i command, dpkg returns the following error: ERROR (dkms apport): unable to determine source package for psmouse-alps-dkms Error! Bad return status for module build on kernel: 3.2.0-25-generic-pae (i686) Consult /var/lib/dkms/psmouse-alps/0.10/build/make.log for more information. I have installed all the updates as well. Can someone help me out with this issue?

  Read the article

• Blank Screen on 12.04

  - by stupidwhiteguy

  Can hit Ctrl-Alt-F1 and login but no fixes work. Tried nomodeset and everything else appears to have upgraded but can't see anything. I really need this computer to work. It is an old Dell with 1.6 processor with old school monitor. I don't know why people are giving my question negative votes. If you know how to fix this, then please help me, as I have read and tried all the solutions that I've found. Just for the record reformatting is not fixing it, and I can't get a boot CD to load either. If you know how to use the blank screen fix tutorial, please explain cos I'm lost. Most people don't understand this stuff and an easy "how-to" fix would be nice.

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• Relaying to tech "support" that computer is actually broken.

  - by Sion

  First some background: I have a Dell Inspiron 15R M050, it is still under the Dell limited warranty and the Best Buy Extended warranty. I am currently dual booting Debian Squeeze and Windows 7, the only reason I go into Windows is to play video games specifically steam games. Issue: When I play my games in Windows I am capable of playing for anywhere from 5 minutes to 2 hours before I suffer a hard-lock. I cannot alt-tab, ctrl-alt-delete, ctrl-shift-escape do anything for 2-3 minutes. After this hard-lock period everything runs fine, I can continue the game for probably another hour at least before I suffer another lock. Games: Borderlands, Splinter Cell: Chaos Theory, Starcraft 2, Garrys Mod What I have tried: Running the diagnostic suite in the dell bios, restoring the OEM Windows recovery partition on the HD, fresh installing Windows 7 Professional, updating BIOS, Calling tech support and having them run a software Hardware Diagnostics suite. The question: I think from the research that I have performed that it might be a lack of thermal paste on the CPU, would I be able to go to Best Buy and have them do a hardware diagnostic from the hardware level then have them be able to tell Dell that there is a hardware issue? Or would there be a different problem?

  Read the article

• Howo to get Multipath IO with Dell MD3600i into active/active setup?

  - by Disco

  I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

  Read the article

• How do you get - Better than 1024x768 Driver for 64 bit Dell PowerEdge Server

  - by tinyJoe

  How do you get better than 1024x768 resolution? Just installed MS Server 2008 64bit on a Dell PowerEdge 64bit box (works OK - Previously running MS Server 2003 32bit) After install - gives a a max resultion of 1024x768 I want to change the reslution to 1280x1024 (Same LCD Worked OK on server 2003) When I down load a driver I get a messeage "Radeon 7000 does not recognise driver" Also have Have a new LG W1042 I'd like to use. This goes up to 1440

  Read the article

• Compatibility of ESX 4 and LTO 3 with LSI2032 Dell Power Edge

  - by dbaur

  Hello, does anybody know something about the compatibility of an LTO 3 Tapedrive (PV HH LTO 3 400GB) attached to an LSI2032 SCSI-Controller? These devices are added to an Dell PowerEdge T610 Server which is listed in the certified Compatibility Guide. I can`t find any information for this controller and this tapdevice. Or are they automaticly compatible because they are options for an compatible Server? greetings Dennis

  Read the article

• Pen Mouse compatibility with Office 2007 on Vista Dell Inspiron 1525

  - by Iddy

  Are there mouse pens that work with a Dell laptop running Vista and Word 2007 that allow direct input into Word using the Vista tablet functionality? Currently I can write with my mouse and the tablet OCR recognizes even that poor handwriting but if there is a pen-shaped mouse that I could just plug and play that would be great. Any brands/education etc would be greatly appreciated as I am woefully ignorant on this technology.

  Read the article

• Install SAS/SATA backplane in Dell PowerVault 220S

  - by e151280

  Is the backplane of a Dell PowerVault 220S svc tag 3sdpcb1 (14 drive, 80 pin hot swap scsi) upgradeable to a SAS/SATA backplane & controller card replacement? The unit already seems to be quite modular, with slide-out replaceable scsi controllers/connectors on the back, and slide out redundant power supplies. With everything else so modular, the backplane would seem to be the next logically upgradeable part of this unit. Thanks in advance for your input

  Read the article

• Unable to install sbs 2008 in DELL POWEREDGE T100 [closed]

  - by Swaminathan Shanmugam

  Still unable to install WIN SBS 2008 in DELL POWEREDGE T100 server and the long post is going on at http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/aa1bc4b0-943e-4ada-8de1-e03161c8fc2c My problem is unable to install sbs 2008 in 500 GB 4k sectors hdd but installation is successful in 512 bytes sector hdd. Anybody please help to solve this issue? Installation of SBS 2008 proceeds ; atlast it is not getting completed with the error message "Windows Setup could not configure Windows on this computer’s hardware"

  Read the article

• What is the Dell E772c CRT Screen kWh consumption

  - by r0ca

  I have a Dell CRT Screen and the only info I have is this: AC input voltage / frequency / current : 90 to 264 VAC / 50 or 60 Hz + 3 Hz / 1.5 A max. (RMS) at 120 VAC and 0.8 A max.(RMS) at 220 VAC How can I calcultate the energy consumption in Watt for an hour or better, a day. Regards, David.

  Read the article

• Dell Optiplex GX620 > windows xp home addition OU7670

  - by Ren D

  My question is my Dell Optiplex 620 is not working properly !! when i turn it on it goes automaticaly to bios and says click on safe mode or safe network or best last start up or normal mode ?? but when i click on normal it comes back to that window then i click on safe mode and it works for about 5 min then it reboots its self every time what can i do ? i checked if there was a virus and its clean !! please help

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >