Search Results

Search found 2592 results on 104 pages for 'dell 6224 powerconnect'.

Page 26/104 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• FreeNas on Dell Powervault 745N: 2TB Limit?

  - by willoller

  I want to purchase 2 x 2TB drives, and install FreeNas on my Dell Powervault 745N. People on the internets seem to be having trouble with the MD3000 firmware, and I want to make sure I can solve any issues before buying the drives. Before I invest, I have 3 questions : Is there a partition size limit determined by the RAID controller? That is, could I have a striped 4TB partition? The spec sheets make me wonder if the RAID controller needs all 4 drives in order to work. Is there any reason this will have to run in RAID5? If I buy 4 matching drives, would the controller support a RAID6 configuration? I'm basically new to all this RAID stuff - sorry for any noob questions.

  Read the article

• Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

  - by Gregg Leventhal

  I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

  Read the article

• Connecting Dell PowerVault NAS to ESXi

  - by Matt Fitz

  Just got a Dell PowerVault NAS storage device running Windows Storage Server Standard which includes NFS. When I try and connect the ESXi server I get the following message: Call "HostDatastoreSystem.CreateNasDatastore" for object "ha-datastoresystem" on ESXi "powerhouse" failed. Operation failed, diagnostics report: Unable to complete Sysinfo operation. Please see the VMkernel log file for more details. I am pretty sure it is a username/password type thing. Not sure were to begin though. Also, I am planning on using "Username Mapping" instead of Active Directory. Any ideas would be greatly appreciated

  Read the article

• Reconfigure RAID on Dell PowerEdge T710

  - by Stefano Borini

  I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

  Read the article

• powerpoint make computer shut down on dell optiplex 760

  - by yael

  hello, At my office we upgraded group of computers to windows 7 + office 2010, few of us have problem that when we work on powerpoint - once in a while the computer suddenly shut down (with out any message). Some of us - has no such problems. We checked and fount that the people who experience problems - use Dell Optiplex 760 PC, and everyone that have no problems use other models. We also found out that the processors of the 760's are not the same - some are Intel E7400 and one is Intel E8400, so I suspect that maybe the mother board is the problem Does any one no this problem? Does any one have an idea about it? Any help will be appreciated. Thanks, Yael

  Read the article

• Reset DRAC/MC password on Dell BladeCentre 1855

  - by Farseeker

  I have a Dell Blade Centre 1855, and nobody knows what the root password for the DRAC/MC card in the blade chassis is (I tried root/calvin). I do not have IP access to the DRAC/MC, nor do I have physical access to the back of the blade centre to access the DRAC/MC module. I do have serial access (and can see the login prompt in hyperterm). I do have physical access to the FRONT of the chassis (the back of the cabinet is locked and lo-and-behold the key cannot be found). Does anyone know how to reset the password? Every piece of literature I find on the internet tells me I need to log in, or run racadm on the host machine (which I can't, because it's inside a blade chassis). If someone does know how to do it with physical access to the back of the bladecentre, please post it anyway, as I'm sure I'll get access to the back of the cabinet one day)

  Read the article

• Remote RAID Control ESXi Dell PowerEdge 2950 OpenManage

  - by yoyomommy

  I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge 7310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

• dell E6500 laptop will not hibernate/standby

  - by Mark Schultheiss

  I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

  Read the article

• DELL switch 6248 port and mac mapping using SNMP

  - by Brad

  I have a Dell 6248 switch. I connect some of my servers to it and want to know which server nic connected to which switch port. I try using snmpwalk to get this information, but I just can get mac/ip mapping of my server nic from switch, I still can't get which switch port it connect. I try a tool named Managed Switch Port Mapping tool, it can show which switch port is connected to which nic/ip. I use WireShare to get all snmp packets but still can't find what's the snmp oid to get this information. Anyone knows how to get this?

  Read the article

• powerpoint make computer shut down on dell optiplex 760

  - by yael

  At my office we upgraded group of computers to windows 7 + office 2010, few of us have problem that when we work on powerpoint - once in a while the computer suddenly shut down (with out any message). Some of us - has no such problems. We checked and fount that the people who experience problems - use Dell Optiplex 760 PC, and everyone that have no problems use other models. We also found out that the processors of the 760's are not the same - some are Intel E7400 and one is Intel E8400, so I suspect that maybe the mother board is the problem Does any one no this problem? Does any one have an idea about it? Any help will be appreciated. Thanks, Yael

  Read the article

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• Dell D620 Windows 7 Blank screen

  - by Dave Arkell

  When I installed Windows 7 on my Dell D620 it was all fine until a couple of days later most times when I either shut down or suspend (by closing the lid). When I unsuspend or startup the computer, there is often a completely blank screen (can't see post screen or anything), and restarting doesn't help. I've found that I can eventually bring it back up again by suspending and unsuspending a few times, but obviously this is not ideal. Has anyone else experienced this? I think it is a driver issue, that somehow the driver is putting the video card into a certain mode that it forgets how to get it back out of. Any ideas on a better solution than my switching off and on business? Edit: Turns out that the video card had burned out! IT managed to get me a new mainboard sorted for me.

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• External USB Fingerprint Reader for Pre-boot Authentication for Dell Laptop

  - by cop1152

  My company just purchased several Dell Latitude E6500 laptops with docking stations and external monitors. These laptops have a fingerprint scanner located next to the keyboard. DOCKED users who prefer to use the included fingerprint scanner for pre-boot authentication are forced to open their laptop in order to access the scanner. This is an inconvenience when the laptop is docked. We are looking for an external, usb fingerprint scanner, that will work with the current preboot authentication setup. I assume that this scanner would have to access the existing credentials for authentication....wherever they are stored. So we would require something that would work PRE-BOOT, use the existing credentials, and not interfere with usage when the machine was not docked, such as when the laptop is being used at home. Does anyone have experience with this scenario? Thanks.

  Read the article

• Ideas for home media server with Dell laptop?

  - by Warlax

  Hi guys, We have an old Dell Inspiron laptop we don't use anymore and would look to turn it onto a media/backup server for music/pictures - and maybe documents/code. The laptop only has 40Gb of HD space but we can hook to it a USB external HD with an additional 80Gb. This is a very general question: - What OS should I put on it (more like, what flavor of Linux)? - What media/backup server software should I install on top of that? - How would you go about backing up to it? I need to back up computers on the same LAN, some have Windows, some OS X, some Linux. If you could point me to an all-in-one solution with a nice tutorial for non-sysadmin folks it would be greatly appreciated, thank you!!!

  Read the article

• Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

  - by David Murdoch

  I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge T310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

• Oracle RAC interconnect in a Dell M1000e Blade Enclosure

  - by Antitribu

  We are looking at a Dell M1000e enclosure and appropriate Blades with 4 NICs each. We are planning on running Linux/Oracle 11g RAC on two blades, storage will be handled on an iSCSI SAN for which two NICs (via passthrough) will be connected leaving us with two NICs (via blade centre switches). We would like to have an interconnect (obviously) , an external IP and an internal IP. Would best practice be to: bond the remaining two interfaces and VLAN as appropriate to provide three virtual interfaces? run the interconnect on one interface and VLAN the external/internal interfaces? purchase a blade with more NICs as the above is a terrible idea? Another option? Please feel free to point out the blindingly obvious or to relevant documentation on support.oracle. I am specifically interested in supported configurations and best practices. Thanks!

  Read the article

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• How to play games in widescreen in Windows 7, Dell Studio 1555

  - by blasteralfred

  I have a dell studio 1555 laptop with a GPU inside. The details are below; Hardware details Software details I can play games in widescreen in Vista, but not in 7. I am using Windows 7 Home Premium. I have the latest Catalyst Control Center. Instead of widescreen, the games are running in a classic style, say 1024x768 ratio. When I play need for speed underground, the maximum possible resolution is 1024x768 (all other games are like this). I have no problem with HD videos and anything else. How can I fix this? Thanks in advance...:)

  Read the article

• Dell Inspirion 1525 64bit driver compatibility

  - by Tony

  Hello, Can anyone tell me what the compatibility of drivers on 64bit vista are like on the Dell Inspiron 1525. Mine is just a year old now and I want to upgrade to 64bit vista. I wondered if there's known issues with drivers that I should be aware of before upgrading? Tony PS: is the upgrade worth it? My machine has 3GB of RAM and runs a T5800 2.0GHz DuoCore Processor. I use Visual Studio often and have loads of things open at the same time a lot. That's why I'm considering an upgrade.

  Read the article

• Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

  - by Ryan

  I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

  Read the article

• USB 3 adapter for a dell 2850 with PCI (or PCIX) ports

  - by Don Dickinson

  Does anyone know if there is a plain PCI (or PCIX) USB 3 adapter. i understand the bandwidth of PCI < USB3, but it still beats the heck out of USB 2. i have some older dell 2850s that do not have the PCI E ports that most USB 3 adapters require. i'd really like to get usb3 in those servers. i searched the internet but didn't see any. the local computer store said they only had pcie adapters. tia, don

  Read the article

• Windows7 + Dell D830 = frequent blue screens

  - by Mulone

  I'm using Windows 7 on a Dell laptop (Latitude D380). The laptop used to be incredibly stable on Windows XP, but now I experience frequent blue screens (with a message saying "MEMORY DUMP") when I open a lot of applications concurrently. Is there a way to diagnose the issue and track it down? It could be some incompatible drivers or application. I checked the folder C:\Windows\Minidump and I found some files. THen I tried to open them and they disappeared. Any hints?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >