Search Results

Search found 21398 results on 856 pages for 'display adapter'.

Page 24/856 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Ubuntu not detecting second monitor

  - by Julian Le Saux

  I'm running Ubuntu 12.04 on a Lenovo x61s Thinkpad. As the screen's rather small and I want to do some video editing, I thought I'd plug in a monitor and use that. The monitor is Relisys JM777 (quite old). When I plug it into my other computer, which is running Windows 7, it immediately mirrors the display; but when plugged into the Lenovo the monitor screen remains blank. The graphics card on the Lenovo is a "VGA compatible controller" according to SysInfo. Anybody got any suggestions? I'm quite new to Linux, so simple explanations would be greatly appreciated. The contents of my Xorg.0.log file can be seen at http://paste.ubuntu.com/1009855/ .

  Read the article

• Adjust resolution in xfce4 virtualbox guest guest

  - by David

  I have Virtualbox 4.1.2_ubuntur3859 installed on an Ubuntu 11.10 host, running a guest ubuntu server 10.04 with xfce4 and xorg installed with no-install-recommends. I have installed guest additions, but the maximum resolution in the display settings is 800x600. I have read related questions: How to change resolution of the VirtualBox (Ubuntu guest and host)? Higher screen resolution in VirtualBox? upgrading VirtualBox 3.2.10 breaks my guest Ubuntu screen resolution Ubuntu as guest OS (with Vista host) stuck at 800x600 resolution but none contain the solution to my issue. Am I missing any particular packages that would allow me to change resolution? I would like to keep the machine as small as possible.

  Read the article

• Screen Corruption in half the screen only

  - by Guy DAmico

  About 50% of the my NATTY desktop screen is corrupted. Once that happens I can re-boot as many times as I want but the problem continues. If I logout and then into WINDOWS for a day I may be successful and boot UBUNTU with a good screen. The desktop is formatted correctly, there's no pixelation, rather there is a fine grained white crosshatch pattern covering the entire screen. If I open any application the screen corruption worsens eventually to the point I can no longer make out anything. I ran ram memory test w/o any errors. I have no display issues when running WINDOWS 7. Any ideas. My computer is a Dual Boot stock DELL 5150 w/3gig of ram an on board video.

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• Ubuntu 12.04 "Do nothing" when "lid closed" blanks out external monitor

  - by Elijah Lynn

  This is not the same as this question. I have Ubuntu 12.04 running with an Nvidia card on a W510 Thinkpad. I have one external monitor connected. When I change the power settings to "Do nothing" when "Lid closed" it still keeps the system running which is great. However, it blanks out the display on any external monitors making the system useless. I plan on getting a dock soon and having to identical resolution monitors and would love to be able to dock the monitor and work as normal on the external monitors. Does anyone have a suggestion or fix for this? Should I report this as a bug or feature request?

  Read the article

• Ubuntu 12.10 "Turn screen off when inactive for: Never" still turns off

  - by Will

  After a fresh install of Ubuntu 12.10, my screen still goes off after about ten minutes. I've been to the Brightness and Lock control panel. The Turn screen off when inactive for: setting is set for Never. I've been through the dconf Editor searching for power, screen, and idle changing parameters. This doesn't seem to have any effect on the display timeout. Here's one more interesting thing, the screen doesn't go off, per se. It just goes black. Meaning, the back lighting is still on, and all the pixels are black. When it goes black, it does a very pleasant quick dim to black. Similarly, it quickly un-dim's after a key press, mouse movement, or mouse click. So, I'm feeling this is more of a software setting the timeout, not a power saving function.

  Read the article

• Screen has 1px vertical dead area on the right side

  - by pileofrocks

  Meaning that I can not click anything on that 1px vertical area (such as scrollbars). Illustration (purple = screen, black = the dead area): I am thinking Compiz has to be the main suspect, especially as on a guest account, this problem does not exist. I have a dual-monitor setup and this does not happen on the 2nd screen. However, turning off the 2nd display does not make any difference. I had this issue already before upgrading to 13.10 and while doing that, I also resetted all Compiz settings and re-loaded my profile configuration file. I have tried disabling all Compiz plugins under "Window Management" What next?

  Read the article

• Dimming the backlight is irreversible on a Samsung Q210 notebook, what do I do?

  - by user27304

  I'm new to the community, although I have been using Ubuntu since 2010. I have a Samsung Q210 notebook; Specs: Intel® Core™2 Duo CPU P8400 @ 2.26GHz × 2 4 Gigs RAM Nvidia 9200m GS (although system information in Ubuntu doesn't know) 194 GB HD OS: Ubuntu 11.10 Kernel is 3.0.0-12-generic-pae Although Samsung seems to be infamous for problems with Ubuntu, after upgrading to Oneiric, finally the FN Brightness Buttons are recognized. The only problem is, after dimming the backlight for a fixed amount of steps (3 or 4, I dare not count now because that would mean rebooting because I can't see anything), the display goes completely dark and using the FN buttons to brighten the backlight does not work anymore (before reaching that threshold, going brighter after dimming works). Now what do I do? File a bug report? If not, what then? If yes, how? Not sure... guess I should ask here first.. thanks for answering in advance.

  Read the article

• Ubuntu appears very small at 1080p, text almost undreadable.

  - by Dakota

  Alright... So I have a 15" dell studio xps with a 1080p screen. Everything seems really small with 1080p, in 720 everything is fine but just looks very low res. So I definitely want to get the full resolution the display can give me but dont want everything so small. help?? EDIT: Well yes higher resolution means more pixels. But it shouldnt mean fonts the size of of 7 in MS word, and webpages looking like their at 50%... http://i.imgur.com/Ds76nk8.jpg http://i.imgur.com/9fW8vEt.jpg Im not saying windows is better, but windows did not appear miniature at 1080.

  Read the article

• Ubuntu 12.10 - Resolution stuck at 1024x768 using Open Source Radeon Driver

  - by mumble

  I'm using Ubuntu 12.10 with an ATI Radeon HD5670 card. I currently have the open source xorg-edgers driver. I've been using this driver interchangeably with the Radeon open source driver since fglrx seems to give me a lot of freezes. So I can't really use proprietary drivers, the Radeon driver seems to be stable for me, the resolution is the only problem. The resolution is stuck at 1024x768, where my monitor's native resolution is 1366x768. How do I enable that resolution? Going to System Settings Display only gives me 800x600 and 1024x768 by the way. And just another question, how do I know if xorg-edgers driver is enabled? When I run sudo lshw -c video, I still see the radeon driver. configuration: driver=radeon latency=0 Thanks a lot in advance!

  Read the article

• How do you change your screen's color temperature in Ubuntu?

  - by RPG Master

  I edit my photos on my laptop (yes, I know they have crap displays) and I recently had to replace the screen because the old one just randomly died. The old one had decent color reproduction by default, but this new one is VERY blue. After playing with the Gamma I've gotten it to be a bit better, but it's still pretty blue. So, my question is, how do I go about changing my laptop's display's color temperature? And I don't mean through something like the Red, Green, Blue sliders in the NVIDIA config menu. I'm talking about like adjusting in degrees, like editing a photo's white balance. EDIT: So now I've found Redshift and it's doing me pretty good. I thought it might be helpful if I out here the command I'm using. redshift -t 5000:5000 -g .5 By adding this to my start up commands I should be good. I'm still open to other suggestions, because I'd like something that actually edited my xorg.conf or something like that.

  Read the article

• Force Xorg to run in specific resolution

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024*768. I have "installed n configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however whenever theirs a need to enter GUI I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem for its default refresh rate don't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204*768

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Bridging VirtualBox over OpenVPN TAC adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• How do I choose which Ethernet Adapter to bridge in VMPlayer

  - by Catherine MacInnes

  I am running vmplayer 3.1.0 on Ubuntu. The host machine has four ethernet adapters that are configured to run on four different subnets. I need to run four VMs each with a single ethernet adapter bridged onto a specific one of the physical ethernet adapters. Does anyone know how to do this? Am I simply exceeding the capabilities of vmplayer and have to go to one of the other vmware products, if so, which one. Note that I have no need to create additional VMs, these are VMs that are being given to me by companies that want us to develop software for their products.

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Limited connection whenever I connect to a Wi-Fi network outside the company

  - by anderZubi

  Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

  Read the article

• Does a USB to RJ-45 console cable exist?

  - by Carl Flippin

  I am aware of the RJ-45 to DB9 adapter commonly used on cisco routers to access console. I am aware of the USB to DB9 adapters to allow laptops without serial to get a serial port. I am looking for a USB to RJ-45 adapter so I don't have to chain two adapters together. I have searched everywhere but even the pre-packaged solutions seem to have the two adapters chained together. Does such a thing exist? If it doesn't is there some technical reason it cannot? It seems like a manufacturer would just have to wire the DB9 end of the USB adapter differently and it would work just fine plugged straight into the console port of the router.

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• No network adapter drivers after Windows re-install

  - by Arno

  This is a pretty basic question. I got a PC (Packard Bell Easynote TK11-BZ-010BE) that had linux on it, so I thought, just delete the partition and its alright. Well, it wasn't. I went into grub recovery and couldn't do anything, so I re-installed windows again. Now the problem is that everything works expect my network adapter. When I go to device manager, I get that there aren't any driver's for it installed. But without internet, I can't install the so called driver finders. How should I solve this?

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• setting up bridged adapter for VPN server

  - by B. VB.

  I have an Ubuntu linux Linode server that I am trying to install OpenVPN on. I'm following the tutorials (which, it turns out, are quite incomplete). auto br0 iface br0 inet static address 192.168.0.10 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off When I add this chunk in my /etc/network/interfaces, and I restart networking, my eth0 interface does not have an IP and I cannot get on the network (I need to use a buggy, slow, and annoying AJAX term to do damage repair). Why does adding this screw everything up? Any tips on how to set up this bridged adapter?? Thanks in advance!

  Read the article

• USB 3 adapter for a dell 2850 with PCI (or PCIX) ports

  - by Don Dickinson

  Does anyone know if there is a plain PCI (or PCIX) USB 3 adapter. i understand the bandwidth of PCI < USB3, but it still beats the heck out of USB 2. i have some older dell 2850s that do not have the PCI E ports that most USB 3 adapters require. i'd really like to get usb3 in those servers. i searched the internet but didn't see any. the local computer store said they only had pcie adapters. tia, don

  Read the article

• Magical moving desktop icons

  - by Nathan Taylor

  I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >