Search Results

Search found 21398 results on 856 pages for 'display adapter'.

Page 25/856 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Explain need for Toredo tunnel adapter pseudo interface~simply please [closed]

  - by bill gregmen

  My laptop was stolen by my ex. I need to know how he used my pc to hack all my accounts. I know the tunnel adapter was not used but I blamed him for using it. I need to explain in court exactly what the device is and what it does. Also haven't figured out how he accessed my computer. I disabled the router recently. Can an external modem be hacked? I was told by my server that the modem I.P. address changes randomly every 4 days. Thank you

  Read the article

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Android strange behavior with listview and custom cursor adapter

  - by Michael Little

  I have a problem with a list view and a custom cursor adapter and I just can't seem to figure out what is wrong with my code. Basically, in my activity I call initalize() that does a bunch of stuff to handle getting the proper data and initializing the listview. On first run of the activity you can see from the images that one of the items is missing from the list. If I go to another activity and go back to this activity the item that was missing shows up. I believe it has something to do with setContentView(R.layout.parent). If I move that to my initialize() then the item never shows up even when returning from another activity. So, for some reason, returning from another activity bypasses setContentView(R.layout.parent) and everything works fine. I know it's impossible for me to bypass setContentView(R.layout.parent) so I need to figure out what the problem is. Also, I did not include the layout because it is nothing more then two textviews. Also, the images I have attached do not show that the missing item is the last one on the list. Custom Cursor Adapter: public class CustomCursorAdapter extends SimpleCursorAdapter { private Context context; private int layout; public CustomCursorAdapter (Context context, int layout, Cursor c, String[] from, int[] to) { super(context, layout, c, from, to); this.context = context; this.layout = layout; } public View newView(Context context, Cursor cursor, ViewGroup parent) { LayoutInflater inflater = LayoutInflater.from(context); final View view = inflater.inflate(layout, parent, false); return view; } @Override public void bindView(View v, Context context, Cursor c) { if (c.getColumnName(0).matches("section")){ int nameCol = c.getColumnIndex("section"); String section = c.getString(nameCol); TextView section_text = (TextView) v.findViewById(R.id.text1); if ((section.length() > 0)) { section_text.setText(section); } else { //so we don't have an empty spot section_text.setText(""); section_text.setVisibility(2); section_text.setHeight(1); } } else if (c.getColumnName(0).matches("code")) { int nameCol = c.getColumnIndex("code"); String mCode = c.getString(nameCol); TextView code_text = (TextView) v.findViewById(R.id.text1); if (code_text != null) { int i = 167; byte[] data = {(byte) i}; String strSymbol = EncodingUtils.getString(data, "windows-1252"); mCode = strSymbol + " " + mCode; code_text.setText(mCode); code_text.setSingleLine(); } } if (c.getColumnName(1).matches("title")){ int nameCol = c.getColumnIndex("title"); String mTitle = c.getString(nameCol); TextView title_text = (TextView) v.findViewById(R.id.text2); if (title_text != null) { title_text.setText(mTitle); } } else if (c.getColumnName(1).matches("excerpt")) { int nameCol = c.getColumnIndex("excerpt"); String mExcerpt = c.getString(nameCol); TextView excerpt_text = (TextView) v.findViewById(R.id.text2); if (excerpt_text != null) { excerpt_text.setText(mExcerpt); excerpt_text.setSingleLine(); } } } The Activity: public class parent extends ListActivity { private static String[] TITLE_FROM = { SECTION, TITLE, _ID, }; private static String[] CODE_FROM = { CODE, EXCERPT, _ID, }; private static String ORDER_BY = _ID + " ASC"; private static int[] TO = { R.id.text1, R.id.text2, }; String breadcrumb = null; private MyData data; private SQLiteDatabase db; CharSequence parent_id = ""; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); data = new MyData(this); db = data.getReadableDatabase(); setContentView(R.layout.parent); initialize(); } public void initialize() { breadcrumb = null; Bundle bun = getIntent().getExtras(); TextView tvBreadCrumb; tvBreadCrumb = (TextView)findViewById(R.id.breadcrumb); if (bun == null) { //this is the first run tvBreadCrumb.setText(null); tvBreadCrumb.setHeight(0); parent_id = "0"; try { Cursor cursor = getData(parent_id); showSectionData(cursor); } finally { data.close(); } } else { CharSequence state = bun.getString("state"); breadcrumb = bun.getString("breadcrumb"); tvBreadCrumb.setText(breadcrumb); CharSequence code = bun.getString("code"); parent_id = code; if (state.equals("chapter")) { try { Cursor cursor = getData(parent_id); showSectionData(cursor); } finally { data.close(); } } else if (state.equals("code")) { try { Cursor cursor = getCodeData(parent_id); showCodeData(cursor); } finally { data.close(); } } } } @Override public void onStart() { //initialize(); super.onResume(); } @Override public void onResume() { initialize(); super.onResume(); } private Cursor getData(CharSequence parent_id) { Cursor cTitles = db.query(TITLES_TABLE_NAME, TITLE_FROM, "parent_id = " + parent_id, null, null, null, ORDER_BY); Cursor cCodes = db.query(CODES_TABLE_NAME, CODE_FROM, "parent_id = " + parent_id, null, null, null, ORDER_BY); Cursor[] c = {cTitles, cCodes}; Cursor cursor = new MergeCursor(c); startManagingCursor(cursor); return cursor; } private Cursor getCodeData(CharSequence parent_id2) { Bundle bun = getIntent().getExtras(); CharSequence intent = bun.getString("intent"); CharSequence searchtype = bun.getString("searchtype"); //SQLiteDatabase db = data.getReadableDatabase(); if (intent != null) { String sWhere = null; if(searchtype.equals("code")) { sWhere = "code LIKE '%"+parent_id2+"%'"; } else if(searchtype.equals("within")){ sWhere = "definition LIKE '%"+parent_id2+"%'"; } //This is a search request Cursor cursor = db.query(CODES_TABLE_NAME, CODE_FROM, sWhere, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } else { Cursor cursor = db.query(CODES_TABLE_NAME, CODE_FROM, "parent_id = "+ parent_id2, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } } private void showSectionData(Cursor cursor) { CustomCursorAdapter adapter= new CustomCursorAdapter(this, R.layout.item, cursor, TITLE_FROM, TO); setListAdapter(adapter); } private void showCodeData(Cursor cursor) { CustomCursorAdapter adapter = new CustomCursorAdapter(this, R.layout.item, cursor, CODE_FROM, TO); setListAdapter(adapter); Bundle bun = getIntent().getExtras(); CharSequence intent = bun.getString("intent"); if (intent != null) { Cursor cursor1 = ((CursorAdapter)getListAdapter()).getCursor(); startManagingCursor(cursor1); TextView tvBreadCrumb; tvBreadCrumb = (TextView)findViewById(R.id.breadcrumb); tvBreadCrumb.setText(cursor1.getCount() + " Records Found"); //cursor1.close(); //mdl } }

  Read the article

• Is DataAdapter use facade pattern or Adapter pattern.

  - by Krirk

  When i see Update(),Fill() method of DataAdapter object I always think Is DataAdapter use facade pattern ? It looks like behind the scenes It will create Command object, Connection object and execute it for us. Or DataAdapter use Adapter pattern because it is adapter between Dataset and Comamand object ,Connection object ?

  Read the article

• How to install the GlassFish v3 server adapter with Eclipse 3.6M6 (Helios)

  - by Pascal Thivent

  When I try to install the GlassFish v3 server adapter via the New Server Wizard, Eclipse 3.6M6 seems to contact remote sites but fail at showing any adapter: Is there another way to install the GlassFish plugin?

  Read the article

• Rails: Auto-Detecting Database Adapter

  - by Dex

  The new version of the ar-extensions gem requires that you load the appropriate adapter yourself. On my development side I use mysql, however Heroku uses PostgreSQL. For example, on my development side I need to do this: require 'ar-extensions/adapters/mysql' require 'ar-extensions/import/mysql' How can I audo-detect which adapter to use?

  Read the article

• Gobi 2000 WWAN Adapter C#.net SDK

  - by jonhilt

  We have some software running on Windows 7 on a mobile device (Panasonic Toughbook) which needs to initiate a 3g connection to download data. The WWAn adapter in question is a Gobi 2000. Is there any way of controlling the adapter direct from .net or should we fall back on Windows to initiate the connection as required (battery life is important).

  Read the article

• what is a virtual adapter

  - by numerical25

  I hear the term virtual adapter from time to time. But not exactly sure what it is. I can't exactly find a good definition online. Is there an exact definition for a virtual adapter. If so, what is it. Or what does it usually mean ?

  Read the article

• Android: Easiest way to make a WebView display a Bitmap?

  - by legr3c

  I have some images that I loaded from a remote source stored in Bitmap variables and I want to display them. In addition to switching between these images the user should also be able to zoom and pan them. My first idea was to somehow pass them via an intent to the built-in gallery application but this doesn't seem to be possible. A solution that is suggested in several places is using a WebView since it already supports zooming and panning. My question is how does my Bitmap data get into the WebView? Do I have to write it to a file first, which I would have to remove again later, or is there an easier way? Or are there even better ways to accomplish my main goal, which is displaying Bitmap data as zoomable and panable images?

  Read the article

• The best way to display data in a table view?

  - by LawVS

  Hey guys, I'm trying to display nutritional information in a table view but am struggling about the best way to show the info. I don't want to create unique views for each page as that would take up a lot of space. My ideal avenue would be like a website having links to data pages instead of individual views for each page. How would I best implement that? For example, I would want the first page to be a list of restaurants, then as you press the restaurant it would list the different types of food...the next page would be a list of those foods and then the final page would be the nutrition info itself. Thanks

  Read the article

• Actionscript Receiving Mouse Events For Lower Indexed And Partially Covered Display Objects?

  - by Chunk1978

  i have 2 sprites on stage. bottomSprite is added to the display list first, followed by topSprite. topSprite partially covers bottomSprite. i've added an event listener to bottomSprite for MouseEvent.MOUSE_MOVED notifications to simply trace the mouseX and mouseY coordinates. however, the notification doesn't work for the parts of bottomSprite that are covered by topSprite. var bottomSprite:Sprite = new Sprite(); bottomSprite.graphics.beginFill(0x666666, 0.5); bottomSprite.graphics.drawRect(150,150, 150, 150); bottomSprite.graphics.endFill(); addChild(bottomSprite); var topSprite:Sprite = new Sprite(); topSprite.graphics.beginFill(0x00FFFF, 0.5); topSprite.graphics.drawRect(250,50, 150, 150); topSprite.graphics.endFill(); addChild(topSprite); bottomSprite.addEventListener(MouseEvent.MOUSE_MOVE, traceCoords); function traceCoords(evt:MouseEvent):void { trace ("Coord = X:" + bottomSprite.mouseX + ", Y:" + bottomSprite.mouseY); }

  Read the article

• PHP - How to display other values, when a query is limited by 3?

  - by Dodi300

  Hello. Can anyone tell me how to display the other values, when a query is limited my 3. In this question I asked how to order and limit values, but now I want to show the others in another query. How would I go about doing this? Here's the code I used before: $query = "SELECT gmd FROM account ORDER BY gmd DESC LIMIT 3"; $result = mysql_query($query); while($row = mysql_fetch_array($result, MYSQL_ASSOC)) { } Thanks!

  Read the article

• How do I display each view once as they are loaded, in Android?

  - by Joe Masilotti

  I have an Android application that works off of a smaller database, around 300 entries. To view the database, I have created a custom view that contains individual rows of data. Then I query the database, and add each line to a newly created custom view. The problem is that it takes a little white for all of this to be created/loaded, so when you open the application, it sits for a few seconds. How can I load one line of data, then display it, then the next, append it, etc.?

  Read the article

• Why does display:table-cell not center content without display:table?

  - by Samuel

  I'm looking for the most efficient (or elegant) way to vertically and horizontally center content of variable height. I've come up with this: http://cssdeck.com/t/2veysdkg/16, which uses css tables to vertically center the main content. My demands for writing this particular piece of code were: Must be able to center variable and fixed width content vertically and horizontally Centered content must be inside the normal document flow (so no overlapping) Sticky footer and normal header of 100% width As few hacks, ugly code or non-semantic html as possible I didn't care about support for IE6, IE7 (I'll use a different stylesheet for them) The weird thing is that the demands above are only met when the header and footer are set to table-row, and the body-tag to display:table. Which is weird because as I understand it the css will generate anonymous table elements when parent table elements are missing. So table-cell should work without all the surrounding elements, but yet I've not been able to make it work. If it were up to me I would prefer to not mess with the display mode for the body tag, and leave the header and footer on display:block. But I've not been able to make it work. Does anyone understand why this doesn't work?

  Read the article

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• BizTalk and SQL: Alternatives to the SQL receive adapter. Using Msmq to receive SQL data

  - by Leonid Ganeline

  If we have to get data from the SQL database, the standard way is to use a receive port with SQL adapter. SQL receive adapter is a solicit-response adapter. It periodically polls the SQL database with queries. That’s only way it can work. Sometimes it is undesirable. With new WCF-SQL adapter we can use the lightweight approach but still with the same principle, the WCF-SQL adapter periodically solicits the database with queries to check for the new records. Imagine the situation when the new records can appear in very broad time limits, some - in a second interval, others - in the several minutes interval. Our requirement is to process the new records ASAP. That means the polling interval should be near the shortest interval between the new records, a second interval. As a result the most of the poll queries would return nothing and would load the database without good reason. If the database is working under heavy payload, it is very undesirable. Do we have other choices? Sure. We can change the polling to the “eventing”. The good news is the SQL server could issue the event in case of new records with triggers. Got a new record –the trigger event is fired. No new records – no the trigger events – no excessive load to the database. The bad news is the SQL Server doesn’t have intrinsic methods to send the event data outside. For example, we would rather use the adapters that do listen for the data and do not solicit. There are several such adapters-listeners as File, Ftp, SOAP, WCF, and Msmq. But the SQL Server doesn’t have methods to create and save files, to consume the Web-services, to create and send messages in the queue, does it? Can we use the File, FTP, Msmq, WCF adapters to get data from SQL code? Yes, we can. The SQL Server 2005 and 2008 have the possibility to use .NET code inside SQL code. See the SQL Integration. How it works for the Msmq, for example: ·         New record is created, trigger is fired ·         Trigger calls the CLR stored procedure and passes the message parameters to it ·         The CLR stored procedure creates message and sends it to the outgoing queue in the SQL Server computer. ·         Msmq service transfers message to the queue in the BizTalk Server computer. ·         WCF-NetMsmq adapter receives the message from this queue. For the File adapter the idea is the same, the CLR stored procedure creates and stores the file with message, and then the File adapter picks up this file. Using WCF-NetMsmq adapter to get data from SQL I am describing the full set of the deployment and development steps for the case with the WCF-NetMsmq adapter. Development: 1.       Create the .NET code: project, class and method to create and send the message to the MSMQ queue. 2.       Create the SQL code in triggers to call the .NET code. Installation and Deployment: 1.       SQL Server: a.       Register the CLR assembly with .NET (CLR) code b.      Install the MSMQ Services 2.       BizTalk Server: a.       Install the MSMQ Services b.      Create the MSMQ queue c.       Create the WCF-NetMsmq receive port. The detailed description is below. Code .NET code … using System.Xml; using System.Xml.Linq; using System.Xml.Serialization;   //namespace MyCompany.MySolution.MyProject – doesn’t work. The assembly name is MyCompany.MySolution.MyProject // I gave up with the compound namespace. Seems the CLR Integration cannot work with it L. Maybe I’m wrong.     public class Event     {         static public XElement CreateMsg(int par1, int par2, int par3)         {             XNamespace ns = "http://schemas.microsoft.com/Sql/2008/05/TypedPolling/my_storedProc";             XElement xdoc =                 new XElement(ns + "TypedPolling",                     new XElement(ns + "TypedPollingResultSet0",                         new XElement(ns + "TypedPollingResultSet0",                             new XElement(ns + "par1", par1),                             new XElement(ns + "par2", par2),                             new XElement(ns + "par3", par3),                         )                     )                 );             return xdoc;         }     }   //////////////////////////////////////////////////////////////////////// … using System.ServiceModel; using System.ServiceModel.Channels; using System.Transactions; using System.Data; using System.Data.Sql; using System.Data.SqlTypes;   public class MsmqHelper {     [Microsoft.SqlServer.Server.SqlProcedure]     // msmqAddress as "net.msmq://localhost/private/myapp.myqueue";     public static void SendMsg(string msmqAddress, string action, int par1, int par2, int par3)     {         using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Suppress))         {             NetMsmqBinding binding = new NetMsmqBinding(NetMsmqSecurityMode.None);             binding.ExactlyOnce = true;             EndpointAddress address = new EndpointAddress(msmqAddress);               using (ChannelFactory<IOutputChannel> factory = new ChannelFactory<IOutputChannel>(binding, address))             {                 IOutputChannel channel = factory.CreateChannel();                 try                 {                     XElement xe = Event.CreateMsg(par1, par2, par3);                     XmlReader xr = xe.CreateReader();                     Message msg = Message.CreateMessage(MessageVersion.Default, action, xr);                     channel.Send(msg);                     //SqlContext.Pipe.Send(…); // to test                 }                 catch (Exception ex)                 { …                 }             }             scope.Complete();         }     }   SQL code in triggers   -- sp_SendMsg was registered as a name of the MsmqHelper.SendMsg() EXEC sp_SendMsg'net.msmq://biztalk_server_name/private/myapp.myqueue', 'Create', @par1, @par2, @par3   Installation and Deployment On the SQL Server Registering the CLR assembly 1.       Prerequisites: .NET 3.5 SP1 Framework. It could be the issue for the production SQL Server! 2.       For more information, please, see the link http://nielsb.wordpress.com/sqlclrwcf/ 3.       Copy files: >copy “\Windows\Microsoft.net\Framework\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” If your machine is a 64-bit, run two commands: >copy “\Windows\Microsoft.net\Framework\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” >copy “\Windows\Microsoft.net\Framework64\v3.0\Windows Communication Foundation\Microsoft.Transactions.Bridge.dll” “\Program Files\Reference Assemblies\Microsoft\Framework\v3.0 \Microsoft.Transactions.Bridge.dll” 4.       Execute the SQL code to register the .NET assemblies: -- For x64 OS: CREATE ASSEMBLY SMdiagnostics AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\SMdiagnostics.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Web] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework64\v2.0.50727\System.Web.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Messaging] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Messaging.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.ServiceModel] AUTHORIZATION dbo FROM 'C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0\System.ServiceModel.dll' WITH permission_set = unsafe CREATE ASSEMBLY [System.Xml.Linq] AUTHORIZATION dbo FROM 'C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll' WITH permission_set = unsafe   -- For x32 OS: --CREATE ASSEMBLY SMdiagnostics AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\SMdiagnostics.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.Web] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.Messaging] AUTHORIZATION dbo FROM 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Messaging.dll' WITH permission_set = unsafe --CREATE ASSEMBLY [System.ServiceModel] AUTHORIZATION dbo FROM 'C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.0\System.ServiceModel.dll' WITH permission_set = unsafe 5.       Register the assembly with the external stored procedure: CREATE ASSEMBLY [HelperClass] AUTHORIZATION dbo FROM ’<FilePath>MyCompany.MySolution.MyProject.dll' WITH permission_set = unsafe where the <FilePath> - the path of the file on this machine! 6. Create the external stored procedure CREATE PROCEDURE sp_SendMsg (        @msmqAddress nvarchar(100),        @Action NVARCHAR(50),        @par1 int,        @par2 int,        @par3 int ) AS EXTERNAL NAME HelperClear.MsmqHelper.SendMsg   Installing the MSMQ Services 1.       Check if the MSMQ service is NOT installed. To check:  Start / Administrative Tools / Computer Management, on the left pane open the “Services and Applications”, search to the “Message Queuing”. If you cannot see it, follow next steps. 2.       Start / Control Panel / Programs and Features 3.       Click “Turn Windows Features on or off” 4.       Click Features, click “Add Features” 5.       Scroll down the feature list; open the “Message Queuing” / “Message Queuing Services”; and check the “Message Queuing Server” option  6.       Click Next; Click Install; wait to the successful finish of the installation Creating the MSMQ queue We don’t need to create the queue on the “sender” side. On the BizTalk Server Installing the MSMQ Services The same is as for the SQL Server. Creating the MSMQ queue 1.       Start / Administrative Tools / Computer Management, on the left pane open the “Services and Applications”, open the “Message Queuing”, and open the “Private Queues”. 2.       Right-click the “Private Queues”; choose New; choose “Private Queue”. 3.       Type the Queue name as ’myapp.myqueue'; check the “Transactional” option. Creating the WCF-NetMsmq receive port I will not go through this step in all details. It is straightforward. URI for this receive location should be 'net.msmq://localhost/private/myapp.myqueue'. Notes ·         The biggest problem is usually on the step the “Registering the CLR assembly”. It is hard to predict where are the assemblies from the assembly list, what version should be used, x86 or x64. It is pity of such “rude” integration of the SQL with .NET. ·         In couple cases the new WCF-NetMsmq port was not able to work with the queue. Try to replace the WCF- NetMsmq port with the WCF-Custom port with netMsmqBinding. It was working fine for me. ·         To test how messages go through the queue you can turn on the Journal /Enabled option for the queue. I used the QueueExplorer utility to look to the messages in Journal. The Computer Management can also show the messages but it shows only small part of the message body and in the weird format. The QueueExplorer can do the better job; it shows the whole body and Xml messages are in good color format.

  Read the article

• Help finding good players that would display music library as folder structure

  - by cipricus

  I have a big music library. Nothing special here. But I very much dislike the way usually music library is displayed in most recommended players, according to Artist/Album/Year/Genre tags, ignoring my folder structure or making it hardly accessible. The problem is that not all my music is tagged according to genre etc, but all is perfectly ordered by folder structure which takes into account all characteristics handled by tags, as well as many others, which I can change and specify at any time. (I can decide ordering my music by country, inside a sub-category like "baroque music", for example). The advantage of using folder structure in displaying media library is that all the logical structure is displayed, with all sub-categories, which can vary and be changed, visible at the same time. Some Players, like Clementine and Quod Libet, can display folders, but when comes to displaying only the library, they still display it only by tags. I am looking for some plugins to good players that would provide a solution to this, and I am looking for different solutions to this. Therefore I'll display as my own answer some solutions that I have already found and welcome other answers with new and better ways to achieve the same purpose. (Most welcome are of course players that, beside having the capability discussed here, would include other elementary features like playlists in tabs, search, and so forth.)

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Ubuntu stops using Nvidia driver after kernel upgrade

  - by Daniel

  Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

  Read the article

• Use MvcContrib Grid to Display a Grid of Data in ASP.NET MVC

  The past six articles in this series have looked at how to display a grid of data in an ASP.NET MVC application and how to implement features like sorting, paging, and filtering. In each of these past six tutorials we were responsible for generating the rendered markup for the grid. Our Views included the <table> tags, the <th> elements for the header row, and a foreach loop that emitted a series of <td> elements for each row to display in the grid. While this approach certainly works, it does lead to a bit of repetition and inflates the size of our Views. The ASP.NET MVC framework includes an HtmlHelper class that adds support for rendering HTML elements in a View. An instance of this class is available through the Html object, and is often used in a View to create action links (Html.ActionLink), textboxes (Html.TextBoxFor), and other HTML content. Such content could certainly be created by writing the markup by hand in the View; however, the HtmlHelper makes things easier by offering methods that emit common markup patterns. You can even create your own custom HTML Helpers by adding extension methods to the HtmlHelper class. MvcContrib is a popular, open source project that adds various functionality to the ASP.NET MVC framework. This includes a very versatile Grid HTML Helper that provides a strongly-typed way to construct a grid in your Views. Using MvcContrib's Grid HTML Helper you can ditch the <table>, <tr>, and <td> markup, and instead use syntax like Html.Grid(...). This article looks at using the MvcContrib Grid to display a grid of data in an ASP.NET MVC application. A future installment will show how to configure the MvcContrib Grid to support both sorting and paging. Read on to learn more! Read More >

  Read the article

• external display in Ubuntu 13.04

  - by thuc2009

  I have had a look on series of similar topics but I could not find a right answer. Currently, I bought laptop Dell latitude E6530 and installed Ubuntu 13.04 (64 bit) alongside with Windows 7 (I could not get rid of it because of some special programs for work). Ubuntu worked well, however, it did not detect the external displays (Dell 23" and Dell 19") no matter I plugged them before or after booting. Edited: I connected my laptop to those external displays through a laptop dock. I went to Settings- Display, the displays were there, but when I enabled them, Ubuntu logged off automatically. No external display was detected. In addition, the laptop screen sometimes was detected as Dell 23" I got an advice from similar topic that nvidia driver should be updated to version 313 or 319. I upgraded driver and the unity launcher disappeared, main display resolution turned to 640*480 and none of external displays was detected. I tried to use additional drivers, but when I turned it on, it told me that there was no driver to be used. Could some one tell me what should I do ? Edited : options vmwgfx enable_fbdev=1

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• "Can't open display" even after access with xhost

  - by Yann

  I'm trying to run a graphical program remotely, without using ssh. I've set the display variable on the server (let's say server.com, Linux, not ubuntu, and no su rights) to point to my workstation (workstation.com, ubuntu 10.04) setenv DISPLAY workstation.com:0 Then on my workstation I've tried both xhost +server.com and xhost + Then I ssh into the server (to test things): ssh [email protected] and try to run xclock, and get the following error: Error: Can't open display: workstation.com:0 I've looked at /etc/ssh/ssh_config on the workstation and I should be forwarding correctly: X11Forwarding yes. How do I go about troubleshooting this? What logs on the workstation document these failed attempts? To explain why I'm doing this: I want to run a batch job on a server to debug an MPI-based parallel program. I want to run xterm as the batch job executable, per the instructions provided by the system admins. This setup use to work. I reinstalled things on my workstation and since then I frequently get one-time message along the lines The authenticity of host 'hostname (XXX.XXX.XXX.XX)' can't be established. My attempt to fix the above was to move my ~/.ssh/known_hosts file to a back up on both server and host, and then to ssh from each to the other with the flag -o StrictHostKeyChecking=no. I no longer get that message, but I was wondering does this play a part in why X11 forwarding is not working?

  Read the article

• How do I fix broken installation?

  - by Daniel

  Let me start off by saying I'm dual booting 11.04 and Windows 7 on a Thinkpad T61p. The problem may have arisen when I hit the power button during normal startup. I'm fully aware how stupid this is. I don't know why I did it. I did it. Now, I can't get in to Ubuntu. Windows works fine. But when I try to start Ubuntu normally, it seems to run some checks, and does not start up. Sometimes, I see a black screen, and it tells me that it's running certain checks, and then, [ok]. Like... Battery Check Somethingorother [ok] It'll give me 1-5 of these. And then it just does nothing, and I have to turn it off. When I try to start in safe mode... I tried low graphics mode, and after going through a couple of dialogue boxes, I'm brought right back to the safe mode dialogue box. And if I hit 'resume,' a shell pushes up (still that grey on black "your computer is broken" type shell) and asks me to log in. I do, and try to run unity. It tells me something along the lines of: WARNING no DISPLAY variable set and then sets it to " :0" , which doesn't work. And then I can't do anything, really, and I have to restart. (I don't know how to do this from the command line, so I just hard reset. That command would be helpful). Does anybody have any idea how I can get Ubuntu working right again? FTP is less pleasant in Explorer than it is in Nautilus or w/e it is now.

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >