Search Results

Search found 17622 results on 705 pages for 'external drive'.

Page 24/705 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• Safe BIOS upgrade run from external USB-HDD and not native OS

  - by ecoologic

  I have a Toshiba M200 laptop which came with Windows Vista. After buying it, I replaced the OS with XP and recently I swapped the internal hard disk with a bigger one where I only have Ubuntu. So now I can boot XP from the external USB hard disk. There's a BIOS update available (2.3 against my 1.8) which I'd like to install and there's also a version for XP. Is it "reasonably" safe to install this upgrade for Windows XP (despite the original OS was Vista, the laptop model is the right one) from my external USB hard disk with Win XP?

  Read the article

• external video card for notebook?

  - by Fuxi

  hi, i'd like to hook an external monitor to my notebook as i need a higher resolution (1680x1050). my notebook supports that resolution (via analog vga out) but the quality is pretty awful - there are blurry horizontal shadows everywhere and tweaking didn't help - seems like the vga out's quality isn't good enough. so i was wondering - does it make sense looking for an external video card? can i also connect a dvi monitor via usb-video-card with optimal quality? my notebook also has pcmcia. any recommendations which i should buy? thx

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

• Sync two external harddrives?

  - by acidzombie24

  A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

  Read the article

• Minimize VirtualBox Hard Drive disk

  - by Aviv

  I have Ubuntu Server 10.04 TLS installed on a Virtual Machine in a VirtualBox. The size of the Hard Drive is dynamic growing hard drive and the maximum is 32GB. At the beginning i had 4GB on the Hard Drive and the size of the .vdi was 4GB. Lately the size of data on the disk is 15GB but the size of the .vdi is almost 32GB. Why is that? How can i pack / optimize / defrag the HD so it will be the same size of the data on the disk? Thanks.

  Read the article

• Cloning single disk drive to multiple drives simultaneously

  - by mr.b

  I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks!

  Read the article

• Would hybrid drive work after SSD failure

  - by lulalala

  Hybrid hard drive combines SSD with traditional hard drives. I know that SSD can fail much often than traditional hard drives. So I want to ask that, when the SSD part of the hybrid drive fails, would I still be able to use the traditional hard drive? If it won't work like that, then I will consider add-in SATA cards instead, as it delegates risk much better. EDIT: I guess it differs from model to model, so if yes what models would work. (I am evaluating Seagate DX for now)

  Read the article

• Can't change current working directory to external drive in Windows

  - by Tom

  I'm trying to run a program located on an external USB disk using the Windows command prompt. I'm running Windows 7 64-bit (running in VMWare Workstation 8.0.) Here's what happens: I plug in the USB disk and it appears as drive letter 'E' in My Computer. I launch cmd from the start menu. I notice the prompt displays C:\Users\Tom> I type cd E:\ I notice the prompt displays C:\Users\Tom> (cd also yields C:\Users\Tom>) I can explore the drive using explorer.exe just fine, and it is connected according to VMWare Workstation. What am I doing wrong?

  Read the article

• Cloning Windows 2003 Server to new hard drive results in failure

  - by Level1Coder

  Scenario: Old hdd is a Seagate 320gb SATA drive New hdd is a WD 320gb SATA drive Created an exact clone and replaced old hdd with new hdd. Boot up with new hdd, it gets into Windows 2003 server environment but things look weird. Lots of system event failures in the event viewer log. System is barely unusable, critical services are all down. Boot up with old hdd, everything is fine. QUESTION: Is it possible to do a simple clone of a Windows 2003 server system? All I'm changing is the hard drive, everything else stays the same (old CPU/old mobo/etc..)

  Read the article

• Completely formatting a USB flash drive

  - by efcjoe

  I have a Verbatim Store 'n' Go drive which by default comes with software in a partition which password protects the drive. I want to erase this partition, as it only works on Windows (I'm having to look at it now through a virtual machine on my Mac). I've tried using KillDisk to totally wipe the whole thing, but it doesn't seem to work, and this password-protecting partition always remains intact. Is there any program which will completely wipe a flash drive, no questions asked? Or is there a way to do it through the Verbatim software? I have the password and everything, I just can't find a way to fully format it. Cheers.

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• Mapped network drive missing from My Computer and Explorer

  - by matt wilkie

  On a Windows XP Pro SP3 machine one network drive refuses to show up in My Computer or Explorer. The missing drive letter is G:, if that matters. Other mappings work fine. Other profiles one the same machine have no problem seeing G:. I can access the G: just fine typing it into the address bar or in CMD shell. I've used TweakUI to toggle hide/show G: with no difference. TweakUI says G: should be visible. I've logged off,on between toggles to make sure the settings are taking effect. I've looked at reg key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] and made sure it's zero'd.ref We've limped along with this broken setup for some time, just working around it, but some applications do not allow typing in a path when choosing a place to save files and it's reached the point where it's intolerable. So, anyone have any idea why XP won't show this drive letter? or how to fix it?

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Windows 7 - cannot access my own external disk

  - by Tomas

  I use Windows 7 Home Premium and external USB disk with NTFS partition. I cannot write-access the my own files on it, even as a member of Admnistrators group! Is there any way how to go around this permission checking, without actually writing some permission information to every folder on it? I have 3 external disks (up to 1TB), and I have thousands hundreds of files on each!!! Doing some permission change, that will actually go recursivelly through all folders on all my disks is plain brain damage!! 1) Is there any way how to change it somehow globally? (like mount options...) .. Or how to go around this annoying permission checking? It was working in Win XP normally! 2) if not, and I must do the recursive operation on all folders, how to do it PERMANENTLY, so that I don't need to do it again on another Windows 7 computer!

  Read the article

• USB flash drive showing empty but half of the capacity is in Used

  - by tamakisquare

  Not sure if I should post my question in superuser, but it looks like the most appropriate place among all StackExchange sites. I have a 16GB Kingston DataTraveler USB drive. When I tried to use it this morning, it showed up nothing in there but yet its details showed that half of the capacity was in used. I tried it with OS X, Ubuntu, and Windows 7 and the results were the same. I tried to create a new folder and it worked. Apparently, the drive is working but somehow not showing my previously stored data. Note that I was still using the drive last night and there wasn't any problems. Following @rob's suggestion, du -h gave me: 16K ./.Trashes 960K ./.Spotlight-V100/Store-V1/Stores/2620683B-A38B-42F4-A247-45CAF4826ADE 976K ./.Spotlight-V100/Store-V1/Stores 1008K ./.Spotlight-V100/Store-V1 1.0M ./.Spotlight-V100 1.1M And, df -h gave me: /dev/sdb1 15G 7.9G 7.1G 53% /media/KINGSTON Confirming what I reported. Anyone got a clue/answer to this issue? Thanks.

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Sync two external harddrives?

  - by acidzombie24

  A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

  Read the article

• External monitor turning black intermittently

  - by coding crow

  I have installed an external monitor (Dell ST2220L, 21.5 inch) on my laptop (Sony Vaio). I am using a DVI-D cable for connection. Since the laptop does not have a DVI-D port, I have connected a DVI-D to HDMI connector on the laptop end and inserted the cable in HDMI port of the laptop.. I have switched off the laptop display and adjusted the screen resolution on the Dell external monitor to 1920 x 1080 and adjusted colors for the Windows 7 and brightness and contrast from the monitor. The problem is the monitor turns of blank intermittently for 1-2 seconds and turns on again at random interval. What could be the reason for this and how to get rid of this problem?

  Read the article

• How to un-partition a drive on windows 7

  - by Michael Rentmeister

  I bought this laptop used from a friend. The laptop has 500gb of storage; however, the drive is partioned. The C: drive has an allocated space of 50gb whereas the partition has 396gb allocated to it. How do i either take some of the space from the partition and move it to the C: drive, or get rid of the partition? I've done some searching and people say I'm supposed to be able to use "Disc Management" to "delete volume," but when i right click on the partition the "delete volume" is not enabled. Here is a picture:

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• How to format my external HDD back to as "removable storage"?

  - by user990106

  Recently I formated my Seagate FreeAgent GoFlex external HDD in Mac OS X using GUID partition table since I wanted to install another Mac OS X onto that external HDD. However I changed my mind after my external HDD being formatted. Now I want to format my external HDD back to NTFS so that I can use it with my Windows 7. However, after I connected my external HDD via USB it didn't show up in my "computer" so I used "Disk Management" to check what's wrong with it. In the "Disk Management" I saw that there was one partition of my external HDD called "EFI partition" and I found that I could not delete this partition in the "Disk Management". So I tried to use "diskpart" in cmd and select the external HDD and commanded "clean". Then the EFI partition was gone and I created new volumn on that external HDD. However, after the volumn being created my external HDD did show up in my "computer" but it is in the "Hard Disk Drive" not in the "Devices with Removable Storage" as it used to be. I'm wondering if I can do anything to it to make it recognized as a "Devices with Removable Storage"?

  Read the article

• Why doesn’t windows explorer show my removable / USB drive even though the command prompt does?

  - by Gishu

  I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >