Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 24/444 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Intermittent connection issues with atheros ar9285

    - by MrStatic
    I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

    Read the article

  • LAMP server VM issues

    - by nullArray
    After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

    Read the article

  • issues changing default version when updating Python on Mac

    - by Emma
    I have a MacBook that came with Python 2.5 installed. I need use a newer version, so I downloaded 3.1 and installed it, then ran the "Update Profile Script" that came with it, which is supposed to change the default version of Python to the one I downloaded. It appeared to run fine and said process completed, but it didn't work. When I type "python" into the terminal it displays version 2.5, and I still can't install pygame, which requires at least Python 2.6. When I do vi .profile I get this: export PATH=.:/opt/local/bin:/opt/local/sbin:$PATH export MANPATH=/opt/local/man:$MANPATH Setting PATH for Python 3.1 The orginal version is saved in .profile.pysave PATH="/Library/Frameworks/Python.framework/Versions/3.1/bin:${PATH}" export PATH ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ".profile" 6L, 251C So it looks like the script did do something, but I don't know enough bash script to understand what. Does anyone know what the issue could be or how to fix it? Thanks a lot!

    Read the article

  • Java issues with Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit

    - by Richard
    In trying to install Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit, the dialogue appears as follows. $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Launching installer... Attach to native process failed $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/lib ./setup: line 80: [: 107:: integer expression expected ./setup: line 83: [: 107:: integer expression expected Error : Incorrect java version (1.2.2 or above is needed). Please enter JAVAHOME path to pick up java: On the server we have the following JREs and I've tried both. $ sudo rpm -qa | egrep "(openjdk|icedtea)" java-1.6.0-openjdk-1.6.0.0-1.27.1.10.8.el5_8 $ find 2>/dev/null | grep -i '/jre/' ./usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre/bin/ ... ./usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Any suggestions? I know I'm overlooking something. In previous searches I've only found one other posting that comes close but it has no responses (http://forum.parallels.com/showthread.php?t=76556).

    Read the article

  • windows 7 issues with local domain name

    - by Phill
    Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

    Read the article

  • Issues running java in Solaris 9 container

    - by Matthew Watson
    Hi, I have a solaris 9 container built from a physical server using flarcreate. Everything seems fine, except when trying to trying to run any "java -server" process it fails with the following error This is on a Sunfire T1000 machine running Solaris 10 10/09 s10s_u8wos_08a SPARC Running jdk1.5.0_15 Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_15/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space? As far as I can tell I'm not actually out of swap space. Running java in client mode works without a problem. Googles only suggestion is related to x86. Any suggestions? Thanks.

    Read the article

  • Centos 6.2 Fresh 'Basic Server' install networking issues

    - by RWC
    I've had a /29 provisioned on a network port for a server and am trying to at least configure the machine so I can ssh into it. It's Centos 6.2 x64 with the Basic Server install. Currently not able to ping gateway or any address for that matter. For reference: Default Interface: em2 Network ID: 66.*.*.0/29 Gateway: 66.*.*.1 Broadcast: 66.*.*.7 Please see my following configs: /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 NM_CONTROLLED=yes ONBOOT=yes HWADDR=Not Important TYPE=Ethernet BOOTPROTO=none IPADDR=66.*.*.2 PREFIX=29 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System em2" NETMASK=255.255.255.248 USERCTL=no $: route -n Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 0.0.0.0 255.255.255.248 U 0 0 0 em2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 1003 0 em2 0.0.0.0 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: route Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 * 255.255.255.248 U 0 0 0 em2 link-local * 255.255.0.0 U 0 1003 0 em2 default 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=excalibur.domain.com GATEWAY=66.*.*.1 Keep in mind that I cannot even currently ping the gateway which is quite confusing for me. My /etc/hosts are configured correctly with the *.2 address. I'm not concerned with getting all of the addresses on the /29 up and running yet, just one so I can at least ssh in. Thanks! Edit: Adding in ifconfig. $: ifconfig em2 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:66.*.*.2 Bcat:66.*.*.7 Mask:255.255.255.248 inet6 addr: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5536 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2599469 (2.4 MiB) TX bytes: 748 (748.0 b) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:34 errors:0 etc etc

    Read the article

  • STARTTLS issues with sendmail

    - by Jim
    I just switch hosts and now have to configure sendmail with certificates in order to send mail. Is there anyone here that can point me to some solid documentation that is known to work? I'm on CentOS, using sendmail 8.13. I am currently trying to figure out why I am getting "Relaying denied. Proper authentication required". I'd be happy to post my mc file if someone thinks thay can help..

    Read the article

  • Focus issues in OS X Spaces

    - by AK
    Spaces rarely returns focus to my last used window. Haven't been able to peg universally reproducible steps, but spend any time switching among spaces and windows and you'll come across this. It often happens with Finder windows. I'm thinking this is because Mac OS X treats Finder as a single app, so bringing Finder forward in one space brings it forward in all spaces. Extremely annoying! Anyone have a fix for this?

    Read the article

  • Issues Installing PHP Memcache module

    - by smith
    I am trying to install memcache on my VPS. When I type $ pecl install memcache I get this error checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. ERROR: `/root/tmp/pear/memcache/configure --enable-memcache-session=yes' failed Any ideas what the issue could be?

    Read the article

  • RAID P410i and P812 performance issues

    - by Alexey
    I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

    Read the article

  • Linux Logitech QuickCam Pro 9000 - microphone issues

    - by drahnr
    I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

    Read the article

  • Windows Firewall issues

    - by Will Vousden
    I'm not sure whether this is a Windows problem or a .NET problem (i.e. whether it belongs here on on SO), but I've written a small HTTP server program in C# (using the .NET HttpListner class) which works fine for the most part, but Windows Firewall seems to be refusing to let connections through to it from anything other than localhost. I've added exceptions for TCP and UDP in the "Inbound Rules" section of the firewall settings, essentially duplicating existing rules for other HTTP-based services which work fine (e.g. foo_httpcontrol). Specifically, I've added separate rules for TCP and UDP connections covering all ports, specific to the executable I'm running. There's no problem when Windows Firewall is disabled, but if I enable it, the connection simply times out.

    Read the article

  • Domains propagation issues.

    - by Andrew
    Hello to all. I got very strange issue, really weird. On weekend, May 9th I changed my server location from US to UK. Of course, everything works correctly excluding domains. There's something wrong. I got few domains on this server but I still cannot access them. When I try from the other location it works correctly. The most funny situation is that everything is working correctly from my girlfriend's work, about 500 meters from our house, but they have another ISP. It also works when I access the domains via proxy server. I checked who.is informations and everything seems to be working. On Sunday and today morning I was able to access my domains but only for a while. When I refreshed website second time I got error "Firefox was not able to connect server". Since then I'm still getting this error. Could it be my ISP fault? Regards, Andrew

    Read the article

  • Driver choice for addressing ubuntu wireless card issues

    - by Holly
    Hello, this should be a relatively simple question. I'm attempting to get my windows wireless card to work with ubuntu, booted from my portable hard drive. This is the guide I'm attempting to follow is on help.ubuntu.com, /community/WifiDocs/Driver/Ndiswrapper My wireless card is a Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller. My computer is an HP Pavilion Entertainment dv5 notebook, which came with Vista 64. I would like confirmation about which of the drivers I should use. At this point, I'm leaning towards Broadcom BCM4318 HP Pavilion zv6000, but I thought it best to ask advice before taking action. The drivers I have to chose from are listed on this page http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=Category:Broadcom Thanks! Holly

    Read the article

  • Mixed network, Linux-to-Linux hostname resolution issues

    - by James
    At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

    Read the article

  • IE8 Compatibility View issues

    - by 08Hawkeye
    I have the IE7 emulater tag in a jsp layout. But when I bring up the page, it defaults to the IE8 view until the user clicks the Compatibility View button. I don't want the user to have to click the button to launch compatibility mode. Is there a way to force IE7 Emulation on pageLoad? I'd even like to disable the button (or any potential to toggle between IE8 standard mode/IE7 view). Thanks! //sw Update: Now the button seems to have disappeared entirely, but still defaults to IE8 standards. Where did it go?! The toolbar context menu has it as selected, but the tools dropdown menu has it grayed out. For my purposes, it is unacceptable for the user to have to use the developer tools or even click the button to trigger emulation, but I don't know why the button disappeared anyway...

    Read the article

  • Rainmeter customization issues, pretty basic

    - by user62865
    I'll admit it; I'm new to using Rainmeter. What I want to do is create two panels (one left, the other on the right) that mirror one another. One side I want to work for the Eastern US while the other for the UK. I want to keep digital clocks, the same style etc., on both sides with their respective time zone. On top of this I want to have weather reports for the whole day (Current weather and temp, morning, afternoon, and night) for each location. However, I have not been able to find any skins which allow this. For whatever reason every time I try to load a skin for a clock I can only load it for one clock of that type and I'm having the same issue with the weather skins. Could anyone please tell me what skins I should look at and how to get a mirrored look?

    Read the article

  • htaccess on remote server issues - password prompt not accepting input

    - by pying saucepan
    EDIT: I will contact the university about my problem after labor day weekend, but I thought if someone knew a quick fix that I haven't tried, or if the problem has an obvious fix then I could hope to try my luck here, thanks! TLDR: Sorry its a long post, I thought I should be... thorough. I am having a common issue (found a dead thread through google with no solution to the same problem) with the prompt to enter in a username and password via htaccess rights, but this prompt will keep popping up asking for a username and password when trying to access my home directory on my university's server which has the .htaccess and .htpasswd files. It does not matter if I enter in correct or incorrect credentials, the prompt will keep asking me for input without displaying my home directory. Ever since I have included these ht files I have never once been able to get past the username/password no matter what I have tried, save for removing them from the directory I am trying to access (my top level directory that I own). This kind of served my original goal of making the top level directory inaccessible to casual users, but if I wanted to use this method on other places, I would want it to work as intended. And I also like it when computers do what I wish they would, so any help is appreciated. Some things I have tried: Changing the file/directory access rights: they told me to try these commands if people can't access my files cd ~/public_html find ./ -type d -exec chmod 755 {} \; find ./ -type f -exec chmod 644 {} \; enter in the single character name/pw at least twenty times in a row, no cheddar. so I changed directory with cd ~ in hopes that this would be my home directory, since my home directory contains the "public_html" directory, so logic tells me that the ~ tilde symbol is the top level directory that I have ownership of. Then I did those two commands to change the rights on the files inside, I am still having no luck. How I got to this point: I have been following the instructions given to me through my university's website for setting up my little directory. A link on how they describe how to password protect the home directory is given below: "Protect Web Directories" instructions I have everything in order except for one small detail that I feel probably does not matter. I am on windows and so I am using winSCP to remote control my allocated server space. The small detail is that as the instructions indicate (on step 3) that I should use the command htpasswd -c .htpasswd {username} where {username} is my folder that holds my allocated server space. But this command requires further input through the terminal, and unfortunately winSCP does not offer this kind of functionality. So I looked up some basic instructions on using htaccess and it is formatted correctly such that the .htaccess file appears as follows: AuthType Basic AuthName "Verify" AuthUserFile /correctpath/.htpasswd require valid-user and this file is in the root directory for my server space as well as the .htpasswd file which has only this data inside: username:password I know for sure that these two files must be formatted correctly, at least according to their tutorial, because before my path was incorrectly formatted via including some curly { braces } without knowing the correct way to do this at first. And the password prompt that shows up when accessing my directory responded by loading an error page indicating to contact OSU admin or something not important. But now that I have everything like it 'should' be. I know this because when I enter in my credentials "username and password" the prompt pops up for my username and password again and again whether or not I enter in correct information. The only exception is that if I click cancel it will direct me to a page saying that I need to enter in a username and password. Note that I am very inexperienced at server-related buisness, two days ago I couldn't have told you what a website actually consists of. So, if you use some technical jargon I may or may not need to look it up and get back to you before I actually understand what you mean, but I am a quick learner and it probably wont matter.

    Read the article

  • Issues while installing no machine setup (NX )

    - by TopCoder
    I am trying to connect to NX server from windows client but it reports following exception NX 203 NXSSH running with pid: 5404 NX 285 Enabling check on switch command NX 285 Enabling skip of SSH config files NX 285 Setting the preferred NX options NX 200 Connected to address: 10.43.51.77 on port: 22 NX 202 Authenticating user: nx NX 208 Using auth method: publickey NX 204 Authentication failed. I have regenearted the default_dsa.key on server and imported the same for client but still not working. Any solutions?

    Read the article

  • Migrateing to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

    - by Chris
    Ok so here's our setup: We have 2 Windows2k3 Domain Controllers. I am trying to replace them with Windows 2008 R2. The Win2k3 servers are DC01 and DC02. The Windows2k8 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller That Runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I dcpromo'd DC1 using the advanced option and added it successfully to my exisiting domain. Roles are GC, DNS and Active Directory Domain Services.I transferred The PDC, RID pool manager and Infrastructure master FSMO to the new DC.(DC1) The Schema master and Domain naming master are still on the old DC (DC01). The first issue I'm encountering is when i dcpromo the second DC (DC2) and select "Replicate data over the network from and existing domain controller" I select the new DC to replicate from (DC1) I get the following error: "Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request." Is this because the Schema master and Domain naming master roles are still on the old DC (DC01)? And if so, if I transfer Schema master and Domain naming master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way. Thanks in Advance -Chris

    Read the article

  • VMWare guest OS internet access issues

    - by Qua Phan
    My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

    Read the article

  • Analyze a wireless network that constantly drops/has speed issues

    - by Eddie Parker
    Hello, I'm curious what the best tools are to use for analyzing problems with a WiFi network. Here's the scenario: I have a WiFi router (Belkin N+) that's setup in AP mode. I have three RT-N13U's that I've purchased to use as 'repeaters', but I've had so many problems when more than one of them is running (bad routes) that I've only got one active. Sometimes certain boxes on my network can't talk to others, and drops are quite frequent and quite aggravating. I'm running Mac, Windows, and Linux (Gentoo) boxes on this network, so any software, or steps I should take that work for any of those boxes should be sufficient. Apologies if this is answered somewhere else - I'll close it as a dupe if so.

    Read the article

  • Issues with creating a snapshot

    - by Andy Welcomer
    Hello everyone, We have a strange issue when attempting to create a snapshot in one of our regional environments. We have 4 VMs, 2 of them have mulitple VMDKs spread onto different datastores. When a snapshot is created, all the VMDKs (except for the first), seem to vanish. If you look at the properties of the VM, the path to the VMDKS points to the datastore where the primary VMDK is, and the file name is some random garbage. If the snapshot is deleted everything returns to normal. Has anyone ever seen this? I'm using ESX3.5 Thank you in advance. Andy ==============UPDATE============== Here is some more information. I just created a test machine with 7 VMDKs. 1 for the OS. and 6 others for data. All of the VMDKs are in seperate datastores. I take a snapshot of the machine, all of the 6 VMDKs loose their reference to the actual VMDK files. The all point to 64KB VMDK files in the datastore where the OS VMDK is located. These 64KB vmdks didn't exist until the snapshot was taken. When the snapshot is deleted, everything goes back to normal.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >