Search Results

Search found 934 results on 38 pages for 'lo fye'.

Page 24/38 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Static IP Address on Ubuntu 12.04 Virtual Machine

    - by chrisnankervis
    I've setup a VM running Ubuntu 12.04 specifically for local web development and am having some problems ensuring it has a static IP address. A static IP address is important as I'm using the IP address in my hosts file to assign a .local suffix to addresses used both in browser and to connect to the correct database on the VM. Currently, every time I connect to a new network or my VM is assigned a new IP address I need to reconfigure my whole environment which is becoming quite a pain. It also probably doesn't help that the default-lease-time on the Ubuntu VM is set to 1800 by default. At the moment I'm using VMWare Fusion and the Network Adapter is enabled and set to "Autodetect" under Bridged Networking. I've tried to set a static IP address within the dhcpd.conf using the code below: host ubuntu { hardware ethernet 00:50:56:35:0f:f1; fixed-address: 192.168.100.100; } The fixed-address that I've used is also outside the range specified in the subnet block (which in this case is 192.168.100.128 to 192.168.100.254). I've tried adding and removing the network adapter and restarting my Mac after each time to no avail. Below is an ifconfig of the VM that might be of some help: eth0 Link encap:Ethernet HWaddr 00:50:56:35:0f:f1 inet addr:192.168.0.25 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe35:ff1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1624 errors:0 dropped:0 overruns:0 frame:0 TX packets:416 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147348 (147.3 KB) TX bytes:41756 (41.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Are there any specific issues with 12.04 that I'm missing? Otherwise has anyone else got any ideas? Thanks in advance.

    Read the article

  • pppoe connection to dsl model

    - by VJo
    Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

    Read the article

  • Not able to connect to local network

    - by Roopesh
    I have installed Kubuntu , I am able to connect to Internet and able to access external sites, but in my local network i have bugzila installed that i am not able to access, even i am not able to ping the gateway also 192.168.1.1 . below is the result of ifconfig command Please help . Thanks ~# ifconfig eth0 Link encap:Ethernet HWaddr b8:70:f4:da:f9:a8 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:884 errors:0 dropped:0 overruns:0 frame:0 TX packets:884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:81131 (81.1 KB) TX bytes:81131 (81.1 KB) wlan0 Link encap:Ethernet HWaddr 68:5d:43:2e:1c:79 inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe2e:1c79/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2446 errors:0 dropped:0 overruns:0 frame:0 TX packets:2324 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1909441 (1.9 MB) TX bytes:393292 (393.2 KB)

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • Trendnet tew-424ub wireless not working after update 12.10

    - by dwa
    I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

    Read the article

  • Configuring Samba to allow Use of CUPS printer

    - by Skizz
    Having trouble with samba printing. I have a CUPS printer installed on an Ubuntu 11.04 server and that works great. When I try to configure samba to allow an XP machine to use the printer, it fails when printing. I can install the printer drivers for XP from the server and the printer appears in the XP printer control panels. When I try to print a test page from the XP machine I get this error in the system event log: Jun 27 20:33:29 FatController smbd[3571]: [2012/06/27 20:33:29, 0] rpc_server/srv_netlog_nt.c:603(_netr_ServerAuthenticate3) Jun 27 20:33:29 FatController smbd[3571]: _netr_ServerAuthenticate3: netlogon_creds_server_check failed. Rejecting auth request from client JAMES machine account JAMES$ Here's my smb.conf file: [global] server string = %h (Server) workgroup = SODOR encrypt passwords = true security = user os level = 255 preferred master = yes domain master = yes local master = yes logon path = \\%L\profile\%U logon drive = S: logon home = \\%L\home\%U domain logons = yes map to guest = Never guest ok = no dns proxy = no time server = yes logon script = logon.bat load printers = yes printing = cups printcap name = cups nt acl support = no interfaces = eth1 lo bind interfaces only = yes smb ports = 445 [netlogon] comment = Net Log On path = /home/samba/netlogon guest ok = no read only = yes browseable = no [profile] comment = User Profiles path = /home/samba/profiles read only = no create mask = 0600 directory mask = 0700 browseable = no store dos attributes = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes guest ok = no printable = yes [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes guest ok = no read only = yes write list = root, skizz Anyone know what the problem is and how to fix it? In addition to the above, I also get this error: Jun 27 21:56:35 FatController smbd[3571]: [2012/06/27 21:56:35, 0] printing/print_cups.c:1027(cups_job_submit) Jun 27 21:56:35 FatController smbd[3571]: Unable to print file to `Edward' - client-error-not-authorized which I think is more relevant.

    Read the article

  • Wireless will not connect on an Asus U56? [closed]

    - by ernie
    I have an ASUS U56. I could connect to internet without delay or problems in Ubuntu 11.04. Now, running Ubuntu 11.10, I have not been able to connect. I can see the network and the computer tries to connect, but never makes the connection. I have been trying to fix this problem since the release date of 11.10. I had to install the older kernel 2.6 to get the wifi to work. Any other solutions? ernest@ernest-U56E:~$ ifconfig eth0 Link encap:Ethernet HWaddr 14:da:e9:25:6c:d0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:53 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 40:25:c2:3f:46:d4 inet addr:192.168.xx.xxx Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::4225:c2ff:fe3f:46d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:44962 errors:0 dropped:0 overruns:0 frame:0 TX packets:32287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35614976 (35.6 MB) TX bytes:5400816 (5.4 MB) ernest@ernest-U56E:~$

    Read the article

  • Trying to compile from source newest apache with newest openssl

    - by AlexMA
    I need to install apache 2.4.10 using openssl 1.0.1i. I compiled openssl from source with: $ ./config \ --prefix=/opt/openssl-1.0.1i \ --openssldir=/opt/openssl-1.0.1i $ make $ sudo make install and Apache with: ./configure --prefix=/etc/apache2 \ --enable-access_compat=shared \ --enable-actions=shared \ --enable-alias=shared \ --enable-allowmethods=shared \ --enable-auth_basic=shared \ --enable-authn_core=shared \ --enable-authn_file=shared \ --enable-authz_core=shared \ --enable-authz_groupfile=shared \ --enable-authz_host=shared \ --enable-authz_user=shared \ --enable-autoindex=shared \ --enable-dir=shared \ --enable-env=shared \ --enable-headers=shared \ --enable-include=shared \ --enable-log_config=shared \ --enable-mime=shared \ --enable-negotiation=shared \ --enable-proxy=shared \ --enable-proxy_http=shared \ --enable-rewrite=shared \ --enable-setenvif=shared \ --enable-ssl=shared \ --enable-unixd=shared \ --enable-ssl \ --with-ssl=/opt/openssl-1.0.1i \ --enable-ssl-staticlib-deps \ --enable-mods-static=ssl make (would run sudo make install next but I get an error) I'm essentially following the guide here except with newer slightly newer versions. My problem is I get a linker error when I run make for apache: Making all in support make[1]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' make[2]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' /usr/share/apr-1.0/build/libtool --silent --mode=link x86_64-linux-gnu-gcc -std=gnu99 -pthread -L/opt/openssl-1.0.1i/lib -lssl -lcrypto \ -o ab ab.lo /usr/lib/x86_64-linux-gnu/libaprutil-1.la /usr/lib/x86_64-linux-gnu/libapr-1.la -lm /usr/bin/ld: /opt/openssl-1.0.1i/lib/libcrypto.a(dso_dlfcn.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5' I tried the answer here, but no luck. I would prefer to just use aptitude, but unfortunately the versions I need aren't available yet. If anyone knows how to fix the linker problem (or what I think is a linker problem), or knows of a better way to tell apache to use a newer openssl, it would be greatly appreciated; I've got apache 1.0.1i working otherwise.

    Read the article

  • Internet slow on one router only [the problem only in Ubuntu] [on hold]

    - by mrSuperEvening
    Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

    Read the article

  • Why has my internet speed dropped down?

    - by Door Knob
    I recently switched to Ubuntu. I've been having a lot of internet troubles ever since. I used Windows 7 before. I've had trouble loading web pages, and it would take a solid minute or two to even start displaying anything. Why is this? How can I fix this? Details: Ubuntu 14.04 ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:2c:59:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 Memory:f7ae0000-f7b00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:785 errors:0 dropped:0 overruns:0 frame:0 TX packets:785 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:70511 (70.5 KB) TX bytes:70511 (70.5 KB) wlan0 Link encap:Ethernet HWaddr 14:da:e9:b0:9d:66 inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11979 errors:0 dropped:0 overruns:0 frame:0 TX packets:10503 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13659505 (13.6 MB) TX bytes:1449698 (1.4 MB) Here's a comparison: Speedtest on my phone: Speedtest on my PC: Taken about 30 seconds apart.

    Read the article

  • Ubuntu 12.04 Network Connection Unavailable

    - by user211315
    I recently added a EDIMAX EW-7811Un to my computer to allow wireless networking. That was working. Now after a reboot I am unable to connect to either wireless or wired network. the result of ifconfig is ifconfig eth0 Link encap:Ethernet HWaddr bc:ae:c5:46:19:6d inet6 addr: fe80::beae:c5ff:fe46:196d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:62615 (62.6 KB) Interrupt:51 Base address:0x4000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:664 errors:0 dropped:0 overruns:0 frame:0 TX packets:664 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:52639 (52.6 KB) TX bytes:52639 (52.6 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • My internet connection slows or dies unexpectedly

    - by genesis
    I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • ubuntu nic card issue

    - by Blainer
    I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

    Read the article

  • Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

    - by Sandro Livaja
    I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

    Read the article

  • wireless blocked after installing ubuntu 12.04

    - by Cornelia Frank
    I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • Broadcom Wireless Issues in Lubuntu 14.04

    - by ratxinxaxcage67
    I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

    Read the article

  • Wired Connection Problem

    - by Dave
    After upgrading to 12.04 my interent connection no longer works. More precisely it is really, really, slow, and occasionally will connect, but do so only for a few moments and then disappear again. I am on a Lenovo Workstation e20. Output of ifconfig: eth0 Link encap:Ethernet HWaddr 70:f3:95:00:64:3e inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::72f3:95ff:fe00:643e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7398 errors:0 dropped:74 overruns:0 frame:0 TX packets:6684 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5407828 (5.4 MB) TX bytes:854343 (854.3 KB) Interrupt:20 Memory:fb120000-fb140000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1587 errors:0 dropped:0 overruns:0 frame:0 TX packets:1587 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:152089 (152.0 KB) TX bytes:152089 (152.0 KB) I am really at a loss for what to do. I am relatively new to Ubuntu, searched the other user questions and couldn't figure this out.

    Read the article

  • HP DV6 connects but no internet

    - by Frank Barcenas
    I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

    Read the article

  • Driver for asus wireless PC card WL-100GE

    - by emab
    I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

    Read the article

  • Wired card not connecting after trying to connect

    - by Mike
    I have an Ubuntu 12.10 PC. When I plug in my internet cable it starts connecting and after a minute it says it can't connect. I tried different cables but nothing works. Wlan works. I think it's the network driver but I don't know how to install/update it. Here's the ifconfig info (if it helps): eth0 Link encap:Ethernet HWaddr 00:01:6c:39:2a:8d inet6 addr: fe80::201:6cff:fe39:2a8d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2011 errors:0 dropped:362 overruns:0 frame:0 TX packets:586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:175452 (175.4 KB) TX bytes:147211 (147.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9779 errors:0 dropped:0 overruns:0 frame:0 TX packets:9779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8460080 (8.4 MB) TX bytes:8460080 (8.4 MB) wlan0 Link encap:Ethernet HWaddr 08:10:74:35:99:9d inet6 addr: fe80::a10:74ff:fe35:999d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1790 errors:0 dropped:0 overruns:0 frame:0 TX packets:3250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:401664 (401.6 KB) TX bytes:2898773 (2.8 MB)

    Read the article

  • How to Install Broadcom Wireless Drivers (BCM43xx)

    - by Fer1805
    I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

    Read the article

  • Kubuntu not showing eth0

    - by Laurbert515
    I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

    Read the article

  • Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

    - by user100987
    When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

    Read the article

  • Google Music Player doesn't work

    - by EricoPF
    I'm trying to log in on Google Music Player application but doesn't work. I get the message below: Login Failed Could not identify your computer. Learn More On Google Help it says that it doesn't run on virtual machines, which is not my case, but I have a virtualbox installed though, and it says some people get to work if they disable their bridge network. The thing is I don't have any bridge interface, even if I remove all virtualbox modules I still get this message. This is my ifconfig output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:15374 errors:0 dropped:0 overruns:0 frame:0 TX packets:15374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1455889 (1.4 MB) TX bytes:1455889 (1.4 MB) wlan0 Link encap:Ethernet HWaddr 94:db:c9:b2:1b:d7 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::96db:c9ff:feb2:1bd7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:828467 errors:0 dropped:0 overruns:0 frame:0 TX packets:568040 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1086663025 (1.0 GB) TX bytes:72984931 (72.9 MB) Any ideias ? Thanks guys! Cheers.

    Read the article

  • Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

    - by user90841
    Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >