Search Results

Search found 877 results on 36 pages for 'loose coupling'.

Page 24/36 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Converting software RAID1 to RAID10 for /boot

  - by luckytaxi

  Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10. The problem I'm having is adding the last drive to the array. I've gotten as far as creating a RAID10 with two missing devices but as soon as I add the last drive, all hell breaks loose. It seems /dev/sda1 is the culprit. What I'm not too sure about is how to create the RAID10. I've tried the following mdadm --create /dev/md2 --level=raid10 --raid-device=4 /dev/sdc1 missing /dev/sdd1 missing I then proceeded to fail /dev/sdb1 from /dev/md0 and added that partition to /dev/md2. I proceeded to install the MBR on EACH partition since boot resides on /dev/sdx1 on each drive. As a test, all is well, I'm able to boot back into the system once I do a quick reboot. Now, when I go add the last drive /dev/sda1, it breaks. I attempted to install grub on /dev/sda1 and I get the following ... grub> root (hd0,0) /dev/sda root (hd0,0) /dev/sda Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type At this point, the array is hosed I believe. I rebooted the server and it refuses to boot.

  Read the article

• Server 2003 PDC DNS not working..Failover server is...

  - by Seth

  In the midst of trying to utilize proc power, i create a fault tolerant DNS server a while ago. Since, Ive been trying to add another controller for exchange. So I thought I would revert back to a single primary DNS for the meantime and now Im balancing on a thread. The server i thought I uninstalled DNS, is still acting as DNS. And now the PDC does not resolve. Can anybody walk me through, Im overwhelmed and cant think straight... Im afraid if anyone restarts their machine they wont have internet. Update Ok so from the beginning. I was configuring Exchange on a new server 2008. How it happened I dont know, but it started to not resolve DNS. (exclamation mark on NIC) even though everything was static. So ultimately I decided to remove the server from the problem, because I noticed DNS was in disarray if I used the DNS IP of the first server. This is when I tested with nslookup on each DNS server. I had uninstalled DNS from the second server, but nslookup was still resolving with that IPaddress, which has me all wound up cause I dont understand. So, since the first DNS server isn't resolving, Im assuming if the second one isnt configured right I'll loose internet. Im just confused and dont know where to start troubleshooting...

  Read the article

• Laptop shuts down randomly without warning

  - by Robert P.

  My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

  Read the article

• Regarding AD Domain controllers and remote branch offices

  - by Alex

  We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

  Read the article

• Assembly Level Language? Unlock iPhone 3GS with latest Baseband. Need Opinion

  - by getkenny

  Hi Guys, So its more like advice i need. I got 2 iPhone 3GS (Bootloader 06.02 and BB 05.11) which are lying around useless cause it was bought it from US and now i am in Dubai. Cannot use the phone because there is no unlock. Now rather than waiting and relying on other people to provide a unlock for the baseband , i was thinking of learning what it takes to unlock a iPhone. I currently don't even know what i got to learn to do this. I understand from soem reading around that i will need to learn ARM to understand the baseband and try to find a exploit: is it correct? I really want to help people out in getting their iPhones working. Also the iPhones cost was $645 each (16GB) so its not like Apple is going to loose any money of it, the person who bought it for me thought that if your not buying with an AT&T contract it means that it is unlocked but it is not true. I need help, i am willing to learn and you guys are the best bunch around to give me advice. Regards.

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• PHP on several servers with session-sharing

  - by Etu

  there's certanly other threads about this, but I have one more question. We are about to scale the website at work to have more than one server. And we need to share the sessions between the servers. We have been looking into different solutions, one in memcached and use Memcached as sessionhandler in PHP. That will probably work. And the idea would be to run memcached on every machine and let all webservers access all other servers memcached servers, and then we have shared sessions between the machines, yay. (we have no resources to setup with sticky-sessions yet, that's a later project. we need this running, and we need this running now. and we will loadbalance with DNS for a starter) But then... If I want to take one server down, say, for maintenance, or a server crashes, or whatever reason. I don't want the users to just loose their sessions and have to start from the beginning... That's why we need some kind of replication, which Memcached does not support. Then I found http://repcached.lab.klab.org/ -- which has multi-master replication of memcached, which is great, and is what I want. But does it work with 2 machines? Say 3, 5, 10? For future scaling. I also looked into redishttp://redis.io/ -- which also seems great, but is a bit more "shaky" with the php-session-handler support, and no multi-master-replication. The thing is that I like to use memcached, but I want to be able to power down one of two boxes without loosing half of the sessions. Any suggestions?

  Read the article

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• Windows won't boot after moving house. How do I solve this?

  - by James

  Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• Removing Phantom Registry Entries

  - by shedd

  First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• Does my use of the strategy pattern violate the fundamental MVC pattern in iOS?

  - by Goodsquirrel

  I'm about to use the 'strategy' pattern in my iOS app, but feel like my approach violates the somehow fundamental MVC pattern. My app is displaying visual "stories", and a Story consists (i.e. has @properties) of one Photo and one or more VisualEvent objects to represent e.g. animated circles or moving arrows on the photo. Each VisualEvent object therefore has a eventType @property, that might be e.g. kEventTypeCircle or kEventTypeArrow. All events have things in common, like a startTime @property, but differ in the way they are being drawn on the StoryPlayerView. Currently I'm trying to follow the MVC pattern and have a StoryPlayer object (my controller) that knows about both the model objects (like Story and all kinds of visual events) and the view object StoryPlayerView. To chose the right drawing code for each of the different visual event types, my StoryPlayer is using a switch statement. @implementation StoryPlayer // (...) - (void)showVisualEvent:(VisualEvent *)event onStoryPlayerView:storyPlayerView { switch (event.eventType) { case kEventTypeCircle: [self showCircleEvent:event onStoryPlayerView:storyPlayerView]; break; case kEventTypeArrow: [self showArrowDrawingEvent:event onStoryPlayerView:storyPlayerView]; break; // (...) } But switch statements for type checking are bad design, aren't they? According to Uncle Bob they lead to tight coupling and can and should almost always be replaced by polymorphism. Having read about the "Strategy"-Pattern in Head First Design Patterns, I felt this was a great way to get rid of my switch statement. So I changed the design like this: All specialized visual event types are now subclasses of an abstract VisualEvent class that has a showOnStoryPlayerView: method. @interface VisualEvent : NSObject - (void)showOnStoryPlayerView:(StoryPlayerView *)storyPlayerView; // abstract Each and every concrete subclass implements a concrete specialized version of this drawing behavior method. @implementation CircleVisualEvent - (void)showOnStoryPlayerView:(StoryPlayerView *)storyPlayerView { [storyPlayerView drawCircleAtPoint:self.position color:self.color lineWidth:self.lineWidth radius:self.radius]; } The StoryPlayer now simply calls the same method on all types of events. @implementation StoryPlayer - (void)showVisualEvent:(VisualEvent *)event onStoryPlayerView:storyPlayerView { [event showOnStoryPlayerView:storyPlayerView]; } The result seems to be great: I got rid of the switch statement, and if I ever have to add new types of VisualEvents in the future, I simply create new subclasses of VisualEvent. And I won't have to change anything in StoryPlayer. But of cause this approach violates the MVC pattern since now my model has to know about and depend on my view! Now my controller talks to my model and my model talks to the view calling methods on StoryPlayerView like drawCircleAtPoint:color:lineWidth:radius:. But this kind of calls should be controller code not model code, right?? Seems to me like I made things worse. I'm confused! Am I completely missing the point of the strategy pattern? Is there a better way to get rid of the switch statement without breaking model-view separation?

  Read the article

• The SmartAssembly Rearchitecture

  - by Simon Cooper

  You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

  Read the article

• code review: Is it subjective or objective(quantifiable) ?

  - by Ram

  I am putting together some guidelines for code reviews. We do not have one formal process yet, and trying to formalize it. And our team is geographically distributed We are using TFS for source control (used it for tasks/bug tracking/project management as well, but migrated that to JIRA) with VS2008 for development. What are the things you look for when doing a code review ? These are the things I came up with Enforce FXCop rules (we are a Microsoft shop) Check for performance (any tools ?) and security (thinking about using OWASP- code crawler) and thread safety Adhere to naming conventions The code should cover edge cases and boundaries conditions Should handle exceptions correctly (do not swallow exceptions) Check if the functionality is duplicated elsewhere method body should be small(20-30 lines) , and methods should do one thing and one thing only (no side effects/ avoid temporal coupling -) Do not pass/return nulls in methods Avoid dead code Document public and protected methods/properties/variables What other things do you generally look for ? I am trying to see if we can quantify the review process (it would produce identical output when reviewed by different persons) Example: Saying "the method body should be no longer than 20-30 lines of code" as opposed to saying "the method body should be small" Or is code review very subjective ( and would differ from one reviewer to another ) ? The objective is to have a marking system (say -1 point for each FXCop rule violation,-2 points for not following naming conventions,2 point for refactoring etc) so that developers would be more careful when they check in their code.This way, we can identify developers who are consistently writing good/bad code.The goal is to have the reviewer spend about 30 minutes max, to do a review (I know this is subjective, considering the fact that the changeset/revision might include multiple files/huge changes to the existing architecture etc , but you get the general idea, the reviewer should not spend days reviewing someone's code) What other objective/quantifiable system do you follow to identify good/bad code written by developers? Book reference: Clean Code: A handbook of agile software craftmanship by Robert Martin

  Read the article

• How can I effectively test a scripting engine?

  - by ChaosPandion

  I have been working on an ECMAScript implementation and I am currently working on polishing up the project. As a part of this, I have been writing tests like the following: [TestMethod] public void ArrayReduceTest() { var engine = new Engine(); var request = new ExecScriptRequest(@" var a = [1, 2, 3, 4, 5]; a.reduce(function(p, c, i, o) { return p + c; }); "); var response = (ExecScriptResponse)engine.PostWithReply(request); Assert.AreEqual((double)response.Data, 15D); } The problem is that there are so many points of failure in this test and similar tests that it almost doesn't seem worth it. It almost seems like my effort would be better spent reducing coupling between modules. To write a true unit test I would have to assume something like this: [TestMethod] public void CommentTest() { const string toParse = "/*First Line\r\nSecond Line*/"; var analyzer = new LexicalAnalyzer(toParse); { Assert.IsInstanceOfType(analyzer.Next(), typeof(MultiLineComment)); Assert.AreEqual(analyzer.Current.Value, "First Line\r\nSecond Line"); } } Doing this would require me to write thousands of tests which once again does not seem worth it.

  Read the article

• Consume webservice from a .NET DLL - app.config problem

  - by Asaf R

  Hi, I'm building a DLL, let's call it mydll.dll, and in it I sometimes need to call methods from webservice, myservice. mydll.dll is built using C# and .NET 3.5. To consume myservice from mydll I've Added A Service in Visual Studio 2008, which is more or less the same as using svcutil.exe. Doing so creates a class I can create, and adds endpoint and bindings configurations to mydll app.config. The problem here is that mydll app.config is never loaded. Instead, what's loaded is the app.config or web.config of the program I use mydll in. I expect mydll to evolve, which is why I've decoupled it's funcionality from the rest of my system to begin with. During that evolution it will likely add more webservice to which it'll call, ruling out manual copy-paste ways to overcome this problem. I've looked at several possible approaches to attacking this issue: Manually copy endpoints and bindings from mydell app.config to target EXE or web .config file. Couples the modules, not flexible Include endpoints and bindings from mydll app.config in target .config, using configSource (see here). Also add coupling between modules Programmatically load mydll app.config, read endpoints and bindings, and instantiate Binding and EndpointAddress. Use a different tool to create local frontend for myservice I'm not sure which way to go. Option 3 sounds promising, but as it turns out it's a lot of work and will probably introduce several bugs, so it doubtfully pays off. I'm also not familiar with any tool other than the canonical svcutil.exe. Please either give pros and cons for the above alternative, provide tips for implementing any of them, or suggest other approaches. Thanks, Asaf

  Read the article

• Binding XML in Sliverlight without Nominal Classes

  - by AnthonyWJones

  Lets say I have a simple chunck of XML:- <root> <item forename="Fred" surname="Flintstone" /> <item forename="Barney" surname="Rubble" /> </root> Having fetched this XML in Silverlight I would like to bind it with xaml of this ilke:- <ListBox x:Name="ItemList" Style="{StaticResource Items}"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBox Text="{Binding Forename}" /> <TextBox Text="{Binding Surname}" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Now I can bind simply enough with LINQ to XML and a nominal class:- public class Person { public string Forename {get; set;} public string Surname {get; set;} } So here is the question, can it be done without this class? IOW coupling between the Sliverlight code and the input XML is limited to the XAML only, other source code is agnostic to the set of attributes on the item element. Edit: The use of XSD is suggested but ultimately it amounts the same thing. XSD-Generated class. Edit: An anonymous class doesn't work, Silverlight can't bind them. Edit: This needs to be two way, the user needs to be able to edit the values and these value end up in the XML. (Changed original TextBlock to TextBox in sample above).

  Read the article

• How to use OSGi getServiceReference() right

  - by Jens

  Hello, I am new to OSGi and came across several examples about OSGi services. For example: import org.osgi.framework.*; import org.osgi.service.log.*; public class MyActivator implements BundleActivator { public void start(BundleContext context) throws Exception { ServiceReference logRef = context.getServiceReference(LogService.class.getName()); } } My question is, why do you use getServiceReference(LogService.class.getName()) instead of getServiceReference("LogService") If you use LogService.class.getName() you have to import the Interface. This also means that you have to import the package org.osgi.services.log in your MANIFEST.MF. Isn't that completely counterproductive if you want to reduce dependencies to push loose coupling? As far as I know one advantage of services is that the service consumer doesn't have to know the service publisher. But if you have to import one specific Interface you clearly have to know who's providing it. By only using a string like "LogService" you would not have to know that the Interface is provided by org.osgi.services.log.LogService. What am I missing here?

  Read the article

• Getter and Setter vs. Builder strategy

  - by Extrakun

  I was reading a JavaWorld's article on Getter and Setter where the basic premise is that getters expose internal content of an object, hence tightening coupling, and go on to provide examples using builder objects. I was rather leery of abolishing getter/setter but on second reading of the article, see to quite like the idea. However, sometimes I just need one cruical element of an entity class, such as the user's id and writing one whole class just to extract that cruical element seems like overkill. It also implies that for different view, a different type of importer/exporter must be implemented (or the whole data of the class to be exported out, thus resulting in waste). Usually I tend towards filtering the result of a getter - for example, if I need to output the price of a product in different currency, I would code it as: return CurrencyOutput::convertTo($product->price(), 'USD'); This is with the understanding that the raw output of a getter is not necessary the final result to be pushed onto a screen or a database. Is getter/setter really as bad as it is protrayed to be? When should one adopt a builder strategy, or a 'get the result and filter it' approach? How do you avoid having a class needing to know about every other objects if you are not using getter/setter?

  Read the article

• "Work stealing" vs. "Work shrugging"?

  - by John

  Why is it that I can find lots of information on "work stealing" and nothing on "work shrugging" as a dynamic load-balancing strategy? By "work-shrugging" I mean busy processors pushing excessive work towards less loaded neighbours rather than idle processors pulling work from busy neighbours ("work-stealing"). I think the general scalability should be the same for both strategies. However I believe that it is much more efficient for busy processors to wake idle processors if and when there is definitely work for them to do than having idle processors spinning or waking periodically to speculatively poll all neighbours for possible work. Anyway a quick google didn't show up anything under the heading of "Work Shrugging" or similar so any pointers to prior-art and the jargon for this strategy would be welcome. Clarification/Confession In more detail:- By "Work Shrugging" I actually envisage the work submitting processor (which may or may not be the target processor) being responsible for looking around the immediate locality of the preferred target processor (based on data/code locality) to decide if a near neighbour should be given the new work instead because they don't have as much work to do. I am talking about an atomic read of the immediate (typically 2 to 4) neighbours' estimated q length here. I do not think this is any more coupling than implied by the thieves polling & stealing from their neighbours - just much less often - or rather - only when it makes economic sense to do so. (I am assuming "lock-free, almost wait-free" queue structures in both strategies). Thanks.

  Read the article

• java partial classes

  - by Dewfy

  Hello colleagues, Small preamble. I was good java developer on 1.4 jdk. After it I have switched to another platforms, but here I come with problem so question is strongly about jdk 1.6 (or higher :) ). I have 3 coupled class, the nature of coupling concerned with native methods. Bellow is example of this 3 class public interface A { public void method(); } final class AOperations { static native method(. . .); } public class AImpl implements A { @Override public void method(){ AOperations.method( . . . ); } } So there is interface A, that is implemented in native way by AOperations, and AImpl just delegates method call to native methods. These relations are auto-generated. Everything ok, but I have stand before problem. Sometime interface like A need expose iterator capability. I can affect interface, but cannot change implementation (AImpl). Saying in C# I could be able resolve problem by simple partial: (C# sample) partial class AImpl{ ... //here comes auto generated code } partial class AImpl{ ... //here comes MY implementation of ... //Iterator } So, has java analogue of partial or something like.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >