Search Results

Search found 19586 results on 784 pages for 'machine instruction'.

Page 24/784 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

    Read the article

  • Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

    - by Scott Muc
    We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

    Read the article

  • Time machine disk icon on boot disk

    - by Ben Lings
    The icon for Macintosh HD (my boot disk) shows as a Time Machine disk. There is a file .com.apple.timemachine.supported in the root of the disk. If I delete the file and restart the computer, the icon goes back to a normal HD icon. However, the .com.apple.timemachine.supported file is recreated at some point on boot because when I log in again, the file has been recreated. If then reboot again, the icon goes back to being a Time Machine one. Any ideas about what is creating this file and why? More importantly - how can I get it to stop? It looks like something thinks the boot disk should be a Time Machine volume, but what? Console.app shows the following messages at approximately hourly intervals: 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Starting standard backup 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Cookie file is not readable or does not exist at path: /.<12 hex digits of MAC address for en0> 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Volume at path / does not appear to be the correct backup volume for this computer. (Cookies do not match) 19/01/2010 19:23:59 /System/Library/CoreServices/backupd[7459] Backup failed with error: 18 Other possibly relevant information: The boot HD isn't the original - the original failed so this is a SuperDuper'd clone of the original drive. I used to use the same disk for a SuperDuper clone as for Time Machine. These are the same same symptoms as this and this.

    Read the article

  • Installing SharePoint 2010 in one machine with built in database

    - by sreejukg
    It is very easy to deploy SharePoint 2010 in a single server using the built-in database. Normally one need to choose such installation for evaluation purposes. When installing with default settings, setup installs Microsoft SQL server 2008 express database along with SharePoint. After installing SharePoint, you need to run SharePoint products and technology configuration wizard which will install central admin website and creates the configuration database and content database for SharePoint sites. Limitations 1. You can not perform this installation on a domain controller 2. The maximum size for express edition database is 4 GB SharePoint 2010 only supports 64 bit operating systems. The installation steps are for windows server r2 64 bit enterprise edition. Installation steps The first screen for the installation is as follows As a first step you need to install the s/w prerequisites. Click on the corresponding link Click next, here you have to agree on the license terms. Select the checkbox and then click next. The installation will starts. The progress will be updated in the screen. This may take some time as during this process, there are some components needs to be downloaded from internet. Make sure you are connected to the internet, then only the installation will become a success. If any error occurs, it will display the error, you need to configure in order to continue. If everything ok you will receive the following success page. Click finish to exit the installation window. Now from the first screen, select Install SharePoint server. This will install SharePoint and SQL server 2008 express edition. First you need to enter the product key for SharePoint. Enter the product key and clicks continue. Now you need to accept the license agreement. Select the checkbox and click on continue. Select the installation type you want.   Now click on the standalone button. In production scenario, you need to select the server farm installation. This article only cover the first option, installing server farm is not in the scope of this article. Once you click on the standalone, the installation starts and you can view the progress as below. If any error occurred during installation, you will get the details and link to the log file. Refer log file and fix the corresponding issue and then start the installation again. If installation completes without any error, you will see the below screen. Make sure you selected the check box “Run the SharePoint products Configuration Wizard now” and click close. The SharePoint products configuration wizard starts. Click next; you will get the following warning Click yes and the configuration steps starts. You can view the progress for each step. Once completed the below screen appears to the user. Click finish to complete the installation. Now SharePoint installation is completed. You can navigate to SharePoint central administration website from the administrative tools and start building your portal. Good luck

    Read the article

  • Machine Check Exception

    - by Karl Entwistle
    When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

    Read the article

  • problem installing mysql on ubuntu server 10.10 machine

    - by badperson
    Hi, I tried installing mysql a couple of times and I'm having problems. First of all, when I install it gives me a message that it's setting up and it just hangs. I can't ctl + c out of it, so I reboot the server and try to log into the db with sudo mysql -u root -p I enter my password and then get ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I restart the server: sudo /etc/init.d/mysql start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service mysql start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start mysql ~$ I try this: aptitude search mysql | grep ^i i A libdbd-mysql-perl - Perl5 database interface to the MySQL data i libmysql-java - Java database (JDBC) driver for MySQL i A libmysqlclient16 - MySQL database client library i mysql-client-5.1 - MySQL database client binaries i A mysql-client-core-5.1 - MySQL database core client binaries i mysql-common - MySQL database common files, e.g. /etc/mys i mysql-embedded - MySQL - embedded library i mysql-server-core-5.1 - MySQL database server binaries When I navigate to the folder to see if the *.sock file exists: '/var/run/mysqld/mysqld.sock' it does not. I also try this: service mysql status status: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Any ideas? On my other machines installing mysql has been a snap, not sure what the problem is here. bp

    Read the article

  • Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

    - by Scott Muc
    We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

    Read the article

  • Poor System performance on my machine running Ubuntu 12.04(Beta 2 updated to the present moment)

    - by Mohammad Kamil Nadeem
    Why is it that my system dies when multitasking(it is happening from 11.10) on Ubuntu11.10(Unity), Kubuntu 11.10(KDE) and Deepin Linux which is based on 11.10(Gnome-Shell) The thing is that I thought with 12.04 I would get performance like I used to get on 11.04 on which everything used to run fine without any lag or hiccups. The same lagging(Browser starts to stutter, increased delay in the launching of dash and applications)is happening on 12.04 http://i.imgur.com/YChKB.png and http://i.imgur.com/uyXLA.png . I believe that my system configuration is sufficient for running Ubuntu as you can check here http://paste.ubuntu.com/929734/ . I had the Google voice and chat plugin installed on 12.04 so someone suggested that I should remove that and see if the performance improves but no such respite(I am having this on multiple operating system based on Ubuntu 11.10 as I have mentioned above). On a friends suggestion Ran Memory Test through Partition Magic and my system passed that fine. One thing more that I would like to know is that why when I have 2Gb Ram and 2.1GB swap does my system starts lag and run poorly when Ram consumption goes 500+. If you require anymore information I will gladly provide it.

    Read the article

  • How to Boot a VMware Virtual Machine from a USB Drive

    - by Usman
    Do you have an OS installed on your USB thumb drive? Booting from it in a VM is now possible, you’ll just have to use a simple trick to get it to work. Last week we showed you how to put Ubuntu on a USB drive in a separate partition, and we also discussed working with VMware Player (our favourite VM Client). But have you ever tried booting from a USB drive in VMWare? It doesn’t allow doing so, but we will force it to boot from a USB, with a bit of old geekery. If you remember, we have showed you how to boot from a USB drive even if your old PC doesn’t allow booting from one. That’s right, using Plop Boot Manager. All we need to do is to load the Plop ISO in VMware, attach and enable the USB drive in VMware, and finally select the USB option in Plop Boot Manager to boot from the USB. So, visit the Plop boot manager download site. HTG Explains: When Do You Need to Update Your Drivers? How to Make the Kindle Fire Silk Browser *Actually* Fast! Amazon’s New Kindle Fire Tablet: the How-To Geek Review

    Read the article

  • Network config for KVM on physical machine with single NIC and single public IP

    - by neo0
    I have a physical machine running CentOS 6.4 and I will rent a place to run it in a data center. I want to install KVM on that machine to run some virtual machines. The problem is my physical machine have only one NIC and the data center give me a public IP for that interface. So how should I configure network on the physical machine to make it assign for each vm a private IP that can connect to Internet. If I create a br0 bridged with eth0 interface and create a vm with option --bridge=br0 then KVM could not assign an IP for the vm so setup can not be done. Should I use NAT mode? Does KVM have any host-only network like Virtualbox? But the vm still has to connect to outside? Thank you! Update I install the guest network using NAT (--network network:default) and then I only have to port-forwarding from the host. But if I config br0 bridged with physical eth0 then the guest can not get an IP from boot. So I removed the br0 and it worked.

    Read the article

  • Implementing a "state-machine" logic for methods required by an object in C++

    - by user827992
    What I have: 1 hypothetical object/class + other classes and related methods that gives me functionality. What I want: linking this object to 0 to N methods in realtime on request when an event is triggered Each event is related to a single method or a class, so a single event does not necessarily mean "connect this 1 method only" but can also mean "connect all the methods from that class or a group of methods" Avoiding linked lists because I have to browse the entire list to know what methods are linked, because this does not ensure me that the linked methods are kept in a particular order (let's say an alphabetic order by their names or classes), and also because this involve a massive amount of pointers usage. Example: I have an object Employee Jon, Jon acquires knowledge and forgets things pretty easily, so his skills may vary during a period of time, I'm responsible for what Jon can add or remove from his CV, how can I implement this logic?

    Read the article

  • 10 Annoying Habits of a Geeky Spouse (GeekDad Wayback Machine)

    <b>Wired:</b> "Everyone has annoying habits, and a sizable part of every successful marriage is learning to live with those things each other does that annoy you. I think it&#8217;s safe to say, too, that geeks have some habits that we think are awesome, but that non-geeks find a little&#8230;less awesome."

    Read the article

  • Diagram that could explain a state machine's code?

    - by Incognito
    We have a lot of concepts in making diagrams like UML and flowcharting or just making up whatever boxes-and-arrows combination works at the time, but I'm looking at doing a visual diagram on something that's actually really complex. State machines like those that parse HTML or regular expressions tend to be very long and complicated bits of code. For example, this is the stateLoop for FireFox 9 beta. It's actually generated by another file, but this is the code that runs. How can I diagram something with the complexity of this in a way that explains flow of the code without taking it to a level where I draw every single line-of-code into it's own box on a flowchart? I don't want to draw "Invoke loop, then return" but I don't want to explain every last detail. What kind of graph is suitable to do this? Is there already something out there similar to this? Just an example of how to do this without going overboard in complexity or too-high-level is really what I want. If you don't feel like looking at the code, basically it's 70 different state flags that could occur, inside an infinite loop that exists to a label based on some conditions, each flag has it's own infinite loop that exists to a label somewhere, and each of those loops has checks for different types of chars, which then runs off into various other methods.

    Read the article

  • ssh use with netcat to forward connections via bastion host to inside machine

    - by Registered User
    Hi, I am having a server in a corporate data centre who's sys admin is me. There are some virtual machines running on it.The main server is accessible from internet via SSH. There are some people who within the lan access the virtual machines whose IPs on LAN are 192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4 the main machine which is a bastion host for internet has IP 192.168.1.50 and only I have access to it. I have to give people on internet the access to the internal machines whose IP I mentioned above.I know tunnel is a good way but the people are fairly non technical and do not want to get into a tunnel etc jargons.So I came across a solution as explained on this link On the gateway machine which is 192.168.1.50 in the .ssh/config file I add following Host securehost.example.com ProxyCommand ssh [email protected] nc %h %p Now my question is do I need to create separate accounts on the bastion host (gateway) to those users who can SSH to the inside machines and in each of the users .ssh/config I need to make the above entry or where exactly I put the .ssh/config on the gateway. Also ssh [email protected] where user1 exists only on inside machine 192.168.1.1 and not on the gateway is that right syntax? Because the internal machines are accessilbe to outside world as site1.example.com site2.example.com site3.example.com site4.example.com But SSH is only for example.com and only one user.So How should I go for .ssh/config 1) What is the correct syntax for ProxyCommand on gateway's .ssh/config should I use ProxyCommand ssh user1@inside.machine nc %h %p or I should use ProxyCommand ssh [email protected] in nc %h %p 2) Should I create new user accounts on gateway or adding them in AllowedUsers on ssh_config is sufficient?

    Read the article

  • Finite state machine in C++

    - by Electro
    So, I've read a lot about using FSMs to do game state management, things like what and FSM is, and using a stack or set of states for building one. I've gone through all that. But I'm stuck at writing an actual, well-designed implementation of an FSM for that purpose. Specifically, how does one cleanly resolve the problem of transitioning between states, (how) should a state be able to use data from other states, and so on. Does anyone have any tips on designing and writing a implementation in C++, or better yet, code examples?

    Read the article

  • Moving from local machine to group web development environment

    - by Djave
    I'm a freelancer who currently creates websites locally using something like MAMP to test websites locally before pushing them live with FTP. I'm looking at taking on my first employee, and I would need to be able to work on websites with them simultaneously. Can anyone explain or provide links to some good documentation on team workflow, or some key phrases I should be googling to get started on my set up? Unlike a lot of the stackoverflow community I've never worked in a dev team, large or small as I'm self taught so just need to know where to start. At present I'm thinking I need an extra computer to use as a server, then use Git or some such to version control files on that computer, as well as installing apache on it so it can be viewed by any computers in my current home network. Is this heading down the right track?

    Read the article

  • Ensure Mac's get correct machine name from DHCP?

    - by Greg Whitfield
    I have a problem in our network where our Mac's occasionally get given the wrong machine name while, I guess, getting a new DHCP lease. The DHCP servers are Windows based - the bulk of our network is Windows, but we have some Linux machines and an increasing number of Macs. The problem specifics is that occasionally a Mac will take on the name of another machine in the network. For example, I have a new Macbook Pro. In the OSX setup is gets called "gomez", and initially starts up on the network with that name without any problems. But after a few days when the machine was restarted (it had several restarts in the meantime), it ended up being called "florrie", which is actually the name of another machine in another part of the network. All network ops work fine, and indeed you don't notice most of the time - it's only when you run apps like Perforce that require the hostname that you get problems. I'm sorry I don't have more info than that, but if I know what to look for I can dig out some more facts. Or any hints on checking the network setup would be useful.

    Read the article

  • Installing Ubuntu with Windows installer on Windows 8 machine

    - by tpmeera
    I have a Windows 8 Ultrabook. I downloaded Ubuntu (release 12.04) and installed using the Windows installer (Wubi). On rebooting at the end of the installation, I get the Windows boot screen asking if I want to boot into Windows 8 or Ubuntu. I select Ubuntu, and I get an error message that says Ubuntu is missing a boot file or has errors. Please let me know how to fix, or if my procedure is incorrect.

    Read the article

  • Proxy Settings per Machine not working on windows server 2008 R2 SP1

    - by Anirudh Goel
    i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

    Read the article

  • is gnome 3 is slow or my machine?

    - by user103054
    I have Dell XPS 15 i7 - 2360 with nvidia 525M (1GB) with optimus running Ubuntu 12.10 64 bit and have bumblebee installed for optimus. Recently I installed Gnome Shell to give it a try and found it sort of lagging under few scenarios though rest all is butter smooth. When I click on Date gnome 3 it appears as if a second has elapsed before the window is drawn. But others panel items like network or volume looks fine. In gnome 3 when I'm on dash with (window preview) if I remove any of the windows before the remaining windows reshuffle it takes about 2 seconds (noticeable clearly). Everything else is fine in both unity and Gnome Shell. What is causing this slowness? Is Gnome Shell is really slower?

    Read the article

  • Ubuntu Dual Screen Using Virtual Machine - AMD GPU

    - by Chris
    I've been searching online and reading tutorials and etc about how to make my ubuntu VM dual screen(x86_64). I have first tried to run these commands: sudo aticonfig --initial -f which gave me the ouput of: sudo: aitconfig: command not found I then googled the output and followed these instructions that I tells me to install my ATI drivers onto my ubuntu. wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty sudo dpkg -i *.deb sudo apt-get -f install sudo aticonfig -f --initial --adapter=all sudo reboot It all works well until I input sudo apt-get -f install which gives me the following output: sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up fglrx (2:8.850-0ubuntu1) ... update-alternatives: error: alternative link /usr/bin/aticonfig is already managed by x86_64-linux-gnu_gl_conf. dpkg: error processing fglrx (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev E: Sub-process /usr/bin/dpkg returned an error code (1) At this point, I don't know what to do since running: gksudo amdcccle For the record, I have 3D acceleration turned on. The following is my GPU for my VM lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any Help on how I can make my VM dual screen with Ubuntu would be great. Thank you in advance.

    Read the article

  • "Error: Unknown error" when trying to start virtual machine from VMware server

    - by slhck
    Problem We are running VMware Server 2.0.0 build-116503 on a Ubuntu 10.04 LTS server. There is a virtual machine installed, running Lotus Domino on Windows Server 2003. Ever since a sudden power failure last week, the virtual machine won't properly start up. When I run the command: vmrun -T server -h https://127.0.0.1:8333/sdk -u root -p jk2x2208 start "[standard] lotus/test.vmx" … after 30 seconds it displays: Error: Unknown error That's about everything I get. I know the command is right, since that's what we've used all the time. This has happened last Saturday after a scheduled backup shutdown, and somehow I was able to start it again. This week, it happened again, and I can't get it back up. Occasionally, I also get: Error: Cannot connect to the virtual machine When I get this, and I run the start command, it seemingly works. Why is this so random? Which configuration could have been messed up? What I've tried / other info I already shut down VMware itself with /etc/init.d/vmware stop. This works. I tried to start VMware again with /etc/init.d/vmware start. It complains that it's "not configured", which is why I had to rm /etc/vmware/not_configured, and then try to start again. There have been no software updates on the machine, and no configuration changes

    Read the article

  • Cannot connect to Internet after using Windows XP on dual booted machine

    - by babelproofreader
    I have a dual booted Windows XP and Ubuntu 10.10 box (AMD64) and have an unusual problem in that after connecting to the internet on Windows I cannot connect using Ubuntu. I don't believe it is actually a problem with configuring my Ubuntu connections because when I get up in the morning Ubuntu connects without any problem - this problem only exists (and persists for at least several hours) if I try to connect using Ubuntu immediately after connecting using Windows. I don't know how long the problem actually lasts because I usually just go to bed and then in the morning I can connect without problems. It is not problem with my provider's service as I have a second Ubuntu 10.10 box which I manually connect and works even when the dual booted one (on Ubuntu) won't. It is a particular problem with the dual booted box. A power down reset does not solve the problem.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >