Search Results

Search found 2874 results on 115 pages for 'magic quotes gpc'.

Page 24/115 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • How to Avoid Your Next 12-Month Science Project

    - by constant
    While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack. After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades? On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea. Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company. Engineering Systems is Hard Work! The backbone of Exalogic is its InfiniBand network: 4 times better bandwidth than even 10 Gigabit Ethernet, and only about a tenth of its latency. What a potential for increased scalability and throughput across the middleware and database layers! But InfiniBand is a beast that needs to be tamed: It is true that Exalogic uses a standard, open-source Open Fabrics Enterprise Distribution (OFED) InfiniBand driver stack. Unfortunately, this software has been developed by the HPC community with fastest speed in mind (which is good) but, despite the name, not many other enterprise-class requirements are included (which is less good). Here are some of the improvements that Oracle's InfiniBand development team had to add to the OFED stack to make it enterprise-ready, simply because typical HPC users didn't have the need to implement them: More than 100 bug fixes in the pieces that were not related to the Message Passing Interface Protocol (MPI), which is the protocol that HPC users use most of the time, but which is less useful in the enterprise. Performance optimizations and tuning across the whole IB stack: From Switches, Host Channel Adapters (HCAs) and drivers to low-level protocols, middleware and applications. Yes, even the standard HPC IB stack could be improved in terms of performance. Ethernet over IB (EoIB): Exalogic uses InfiniBand internally to reach high performance, but it needs to play nicely with datacenters around it. That's why Oracle added Ethernet over InfiniBand technology to it that allows for creating many virtual 10GBE adapters inside Exalogic's nodes that are aggregated and connected to Exalogic's IB gateway switches. While this is an open standard, it's up to the vendor to implement it. In this case, Oracle integrated the EoIB stack with Oracle's own IB to 10GBE gateway switches, and made it fully virtualized from the beginning. This means that Exalogic customers can completely rewire their server infrastructure inside the rack without having to physically pull or plug a single cable - a must-have for every cloud deployment. Anybody who wants to match this level of integration would need to add an InfiniBand switch development team to their project. Or just buy Oracle's gateway switches, which are conveniently shipped with a whole server infrastructure attached! IPv6 support for InfiniBand's Sockets Direct Protocol (SDP), Reliable Datagram Sockets (RDS), TCP/IP over IB (IPoIB) and EoIB protocols. Because no IPv6 = not very enterprise-class. HA capability for SDP. High Availability is not a big requirement for HPC, but for enterprise-class application servers it is. Every node in Exalogic's InfiniBand network is connected twice for redundancy. If any cable or port or HCA fails, there's always a replacement link ready to take over. This requires extra magic at the protocol level to work. So in addition to Weblogic's failover capabilities, Oracle implemented IB automatic path migration at the SDP level to avoid unnecessary failover operations at the middleware level. Security, for example spoof-protection. Another feature that is less important for traditional users of InfiniBand, but very important for enterprise customers. InfiniBand Partitioning and Quality-of-Service (QoS): One of the first questions we get from customers about Exalogic is: “How can we implement multi-tenancy?” The answer is to partition your IB network, which effectively creates many networks that work independently and that are protected at the lowest networking layer possible. In addition to that, QoS allows administrators to prioritize traffic flow in multi-tenancy environments so they can keep their service levels where it matters most. Resilient IB Fabric Management: InfiniBand is a self-managing network, so a lot of the magic lies in coming up with the right topology and in teaching the subnet manager how to properly discover and manage the network. Oracle's Infiniband switches come with pre-integrated, highly available fabric management with seamless integration into Oracle Enterprise Manager Ops Center. In short: Oracle elevated the OFED InfiniBand stack into an enterprise-class networking infrastructure. Many years and multiple teams of manpower went into the above improvements - this is something you can only get from Oracle, because no other InfiniBand vendor can give you these features across the whole stack! Exabus: Because it's not About the Size of Your Network, it's How You Use it! So let's assume that you somehow were able to get your hands on an enterprise-class IB driver stack. Or maybe you don't care and are just happy with the standard OFED one? Anyway, the next step is to actually leverage that InfiniBand performance. Here are the choices: Use traditional TCP/IP on top of the InfiniBand stack, Develop your own integration between your middleware and the lower-level (but faster) InfiniBand protocols. While more bandwidth is always a good thing, it's actually the low latency that enables superior performance for your applications when running on any networking infrastructure: The lower the latency, the faster the response travels through the network and the more transactions you can close per second. The reason why InfiniBand is such a low latency technology is that it gets rid of most if not all of your traditional networking protocol stack: Data is literally beamed from one region of RAM in one server into another region of RAM in another server with no kernel/drivers/UDP/TCP or other networking stack overhead involved! Which makes option 1 a no-go: Adding TCP/IP on top of InfiniBand is like adding training wheels to your racing bike. It may be ok in the beginning and for development, but it's not quite the performance IB was meant to deliver. Which only leaves option 2: Integrating your middleware with fast, low-level InfiniBand protocols. And this is what Exalogic's "Exabus" technology is all about. Here are a few Exabus features that help applications leverage the performance of InfiniBand in Exalogic: RDMA and SDP integration at the JDBC driver level (SDP), for Oracle Weblogic (SDP), Oracle Coherence (RDMA), Oracle Tuxedo (RDMA) and the new Oracle Traffic Director (RDMA) on Exalogic. Using these protocols, middleware can communicate a lot faster with each other and the Oracle database than by using standard networking protocols, Seamless Integration of Ethernet over InfiniBand from Exalogic's Gateway switches into the OS, Oracle Weblogic optimizations for handling massive amounts of parallel transactions. Because if you have an 8-lane Autobahn, you also need to improve your ramps so you can feed it with many cars in parallel. Integration of Weblogic with Oracle Exadata for faster performance, optimized session management and failover. As you see, “Exabus” is Oracle's word for describing all the InfiniBand enhancements Oracle put into Exalogic: OFED stack enhancements, protocols for faster IB access, and InfiniBand support and optimizations at the virtualization and middleware level. All working together to deliver the full potential of InfiniBand performance. Who else has 100% control over their middleware so they can develop their own low-level protocol integration with InfiniBand? Even if you take an open source approach, you're looking at years of development work to create, test and support a whole new networking technology in your middleware! The Extras: Less Hassle, More Productivity, Faster Time to Market And then there are the other advantages of Engineered Systems that are true for Exalogic the same as they are for every other Engineered System: One simple purchasing process: No headaches due to endless RFPs and no “Will X work with Y?” uncertainties. Everything has been engineered together: All kinds of bugs and problems have been already fixed at the design level that would have only manifested themselves after you have built the system from scratch. Everything is built, tested and integrated at the factory level . Less integration pain for you, faster time to market. Every Exalogic machine world-wide is identical to Oracle's own machines in the lab: Instant replication of any problems you may encounter, faster time to resolution. Simplified patching, management and operations. One throat to choke: Imagine finger-pointing hell for systems that have been put together using several different vendors. Oracle's Engineered Systems have a single phone number that customers can call to get their problems solved. For more business-centric values, read The Business Value of Engineered Systems. Conclusion: Buy Exalogic, or get ready for a 6-12 Month Science Project And here's the reason why it's not easy to "build your own Exalogic": There's a lot of work required to make such a system fly. In fact, anybody who is starting to "just put together a bunch of servers and an InfiniBand network" is really looking at a 6-12 month science project. And the outcome is likely to not be very enterprise-class. And it won't have Exalogic's performance either. Because building an Engineered System is literally rocket science: It takes a lot of time, effort, resources and many iterations of design/test/analyze/fix to build such a system. That's why InfiniBand has been reserved for HPC scientists for such a long time. And only Oracle can bring the power of InfiniBand in an enterprise-class, ready-to use, pre-integrated version to customers, without the develop/integrate/support pain. For more details, check the new Exalogic overview white paper which was updated only recently. P.S.: Thanks to my colleagues Ola, Paul, Don and Andy for helping me put together this article! var flattr_uid = '26528'; var flattr_tle = 'How to Avoid Your Next 12-Month Science Project'; var flattr_dsc = 'While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack.After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades?On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea.Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company.'; var flattr_tag = 'Engineered Systems,Engineered Systems,Infiniband,Integration,latency,Oracle,performance'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2012/04/how-avoid-your-next-12-month-science-project'; var flattr_lng = 'en_GB'

    Read the article

  • Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

    - by Kendall Gifford
    I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

    Read the article

  • NRF Week - Disney Store Tour

    - by sarah.taylor(at)oracle.com
    Disney has created a real buzz at this year's NRF event. Yesterday morning we began the Oracle Retail Exchange program with a visit to the flagship Disney store in Times Square. Additionally Oracle made a key announcement with Disney  on Oracle Retail's Point of Sale implementation in 330 stores worldwide. Today   Disney's Steve Finney gave a super session on The Magic of Disney at the NRF Big Show. We also saw Disney making an exclusive news announcement about their plans for Global store openings at the Oracle trade show stand - with a little help from Mickey and Minnie Mouse. Disney Stores have been entirely reinvented since the company in 2008 took ownership after previously franchising the retail arm of the business. They have subsequently been a strong Oracle partner and technology has played a key role in their re imagination of the store environment. The new Imagination stores have a 20% higher footfall and margins are up 25%. The Disney brand is synonymous with magical and memorable experiences for children of all ages. The company is achieving a unique retail experience that delights children and shareholders alike! Technology is a key pillar in helping to deliver on both a strong operating model and a unique customer experience - the best thirty minutes in a child's day is their aim. Steve Finney this morning said their technology has to be as reliable as a theme park ride. Store experiences are much more enjoyable when there are short waiting times and children can interact with their favourite characters through magic mirrors, mobile point of sale, touch screens and custom animations that are digitally transmitted to stores globally. The Oracle Retail Point of Sale with iPad touch screens reduces check out times, stores customer data, ensures that promotions are delivered accurately and reduces losses. This means higher levels of guest conversion, increased availability and convenience for customers who want to check availability at other locations. Disney is a pioneer. At NRF's 100th show, we had the privilege of learning from a retailer using technology as a creative force to drive their business forward.

    Read the article

  • Using PowerShell with Office365

    - by Sahil Malik
    SharePoint 2010 Training: more information Did you know, you can fully manage Office365 with PowerShell?What? Wasn’t Office365 supposed to be in the cloud – how do I use powershell with THAT!? Is it black magic? No not really! Office 365 uses the remote powershell functionality of Windows Powershell 2.0. It builds upon the Windows remote management service (you will find it in the services console of Vista+ or Windows2008+ by default, or installed as an addon on XP). It uses that to connect to a web service, and download the available commandlets – based on the logged in user. WHOAA!! So, what can be managed using PowerShell in Office 365? You can manage domains Security Groups Enhanced Authorizations Identity Federation Partner support – where you designate a partner to manage your Office365 And Exchange. Note that Lync and SharePoint online are not manageable via powershell. So, still sound like black magic? What are the actual steps to use Powershell in Office365? Well Read full article ....

    Read the article

  • Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

    - by ubunsteve
    I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

    Read the article

  • Leading Analyst Firm Positions Oracle in Leaders Quadrant for Web Content Management

    - by Christie Flanagan
    Gartner, Inc. has named Oracle a Leader in its latest “Magic Quadrant for Web Content Management.” Gartner’s Magic Quadrants position vendors within a particular quadrant based on their completeness of vision and their ability to execute on that vision. According to Gartner, “WCM plays an increasingly important role in business performance. It has become the central point of coordination for initiatives involving the enterprise's online presence, and these initiatives have become more sophisticated and more important to enterprises' business strategies. Thus, WCM is key for organizations wishing to execute a strategy of OCO (online channel optimization) that embraces areas such as customer experience management, e-commerce, digital marketing, multichannel marketing and website consolidation.” Gartner continued, “Leaders should drive market transformation. Leaders have the highest combined scores for Ability to Execute and Completeness of Vision. They are doing well and are prepared for the future with a clear vision and a thorough appreciation of the broader context of OCO. They have strong channel partners, a presence in multiple regions, consistent financial performance, broad platform support and good customer support. In addition, they dominate in one or more technologies or vertical markets. Leaders are aware of the ecosystem in which their offerings need to fit. Leaders can: demonstrate enterprise deployments’ offer integration with other business applications and content repositories; provide a vertical-process or horizontal-solution focus.” Oracle WebCenter, the engagement platform powering exceptional experiences for customers, employees and partners, connects people and information by bringing together the most complete portfolio of portal, Web experience management, content, social, and collaboration technologies into a single integrated product suite. Oracle WebCenter also provides the foundation for Oracle Fusion Middleware and Oracle Fusion Applications to deliver a next-generation user experience.  To see the latest reports, webcasts and demonstrations about Oracle's web experience management solution, Oracle WebCenter Sites, please visit our Connected Customer Experience Resource Center.

    Read the article

  • Repair ext4 filesystem on USB drive

    - by phineas
    Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

    Read the article

  • How Do Computers Work? [closed]

    - by Rob P.
    This is almost embarrassing ask...I have a degree in Computer Science (and a second one in progress). I've worked as a full-time .NET Developer for nearly five years. I generally seem competent at what I do. But I Don't Know How Computers Work! Please, bare with me for a second. A quick Google of 'How a Computer Works' will yield lots and lots of results, but I struggled to find one that really answered what I'm looking for. I realize this is a huge, huge question, so really, if you can just give me some keywords or some direction. I know there are components....the power supply, the motherboard, ram, CPU, etc...and I get the 'general idea' of what they do. But I really don't understand how you go from a line of code like Console.Readline() in .NET (or Java or C++) and have it actually do stuff. Sure, I'm vaguely aware of MSIL (in the case of .NET), and that some magic happens with the JIT compiler and it turns into native code (I think). I'm told Java is similar, and C++ cuts out the middle step. I've done some mainframe assembly, it was a few years back now. I remember there were some instructions and some CPU registers, and I wrote code....and then some magic happened....and my program would work (or crash). From what I understand, an 'Emulator' would simulate what happens when you call an instruction and it would update the CPU registers; but what makes those instructions work the way they do? Does this turn into an Electronics question and not a 'Computer' question? I'm guessing there isn't any practical reason for me to understand this, but I feel like I should be able to. (Yes, this is what happens when you spend a day with a small child. It takes them about 10 minutes and five iterations of asking 'Why?' for you to realize how much you don't know)

    Read the article

  • Process video (canon) mov files

    - by user613326
    Well i would like to program something to process HDR made by magic lantern a canon add on. That doesnt change the format its just some kind of add on, that can produce HDR video. Its a bit complex to make such videos so i would like to use some math and make it myself and makee the software freeware (as a thanks to the creators of magic lantern). The problem with that HDR that normal converts have a lot of artifacts, and i would like to make something (for free) using some new algorithms. I have made, this works fine on individual images, my ideas work. I would want to do this on that canon 60d video format. Canons mov format, and am so far out of luck to read that out. It must be possible dough as i know in some projects they do it too. I would not like to export a movie first to jpg and then back to video as that requires a lot of disk space, i would like to retrieve individual frames, do my math based multiple frames, and then build a new movie on it. The output video can be of any type, avi or mov again. Does anyone know of a library who can do that ? (read and save), So i could use it in a C# project (i prefer C# above c++, but c++ is an option to program in to for me).

    Read the article

  • Using SAS Macro to pipe a list of filenames from a Windows directory

    - by Bazil
    I am trying to amend the macro below to accept a macro parameter as the 'location' argument for a dir command. However I cannot get it to resolve correctly due to the nested quotes issue. Using %str(%') does not work, neither do quoting functions for some reason. The macro will work fine when the filepath has no spaces (eg C:\temp\withnospace) as the middle quotes aren't needed. However I need this macro to work for filepaths with spaces (eg 'C:\temp\with space\'). Please help! %macro get_filenames(location) filename pipedir pipe "dir &location. /b " lrecl=32767; data filenames; infile pipedir truncover; input line $char1000.; run; %mend; %get_filenames(C:\temp\) /* works */ %get_filenames('C:\temp\with space') /* doesnt work */

    Read the article

  • Can't figure out jQuery ajax call parameters

    - by chad larson
    I am learning jQuery and trying the following but the parameters are so foreign to me with all the embedded quotes I think that is my problem. Can someone explain the parameters and where quotes go and possibly rewrite my parameters line? (This is a live site to see the required parms). function AirportInfo() { var divToBeWorkedOn = '#detail'; var webMethod = "'http://ws.geonames.org/citiesJSON'"; var parameters = "{'north':'44.1','south':'9.9','east':'22.4','west':'55.2','lang':'de'}"; $.ajax({ type: "POST", url: webMethod, data: parameters, contentType: "application/json; charset=utf-8", dataType: "json", success: function(msg) { alert(msg.d); $(divToBeWorkedOn).html(msg.d); }, error: function(xhr) { alert(xhr); alert(xhr.statusText); alert(xhr.responseText); $(divToBeWorkedOn).html("Unavailable"); } }); }

    Read the article

  • Javacript in html - Using single quote inside another single quote

    - by Ashish Nair
    document.getElementById("img").innerHTML="< img src='/sitepath/"+imgg+".jpg' width='72' height='44' onclick='alert('hello');' />"; The above code is my javascript. Problem is printing hello or any other string. If I just type 123 in place of hello, it does give alert. But am not able to use a string like hello there. Normally a string in an alert function is kept inside quotes ' ' but the entire content is inside double quotes and I have already used single quote at the beginning of onclick function. I tried using Escape character ("\") but it didnt help. Any suggestions?

    Read the article

  • Python equivalent of mysql_real_escape_string, for getting strings safely into MySQL?

    - by AP257
    Hi all Is there a Python equivalent of PHP's mysql_real_escape_string? I'm trying to insert some strings into a MySQL db direct from Python, and keep getting tripped up by quotes in the strings. mysql_string = "INSERT INTO candidate (name, address) VALUES " for k, v in v_dict.iteritems(): mysql_string += " ('" + v_dict['name'] + "', '" + v_dict['address'] + "'), " mysql_string += ";" cursor.execute(mysql_string) I've tried re.escape() but that escapes every non-alphanumeric character in the strings, which isn't what I need - I just need to escape single quotes in this instance (plus more generally anything else that might trip up MySQL). Could do this manually I guess, but is there a smarter way to do it in Python?

    Read the article

  • Why mysql is not storing data after "#" character?

    - by Nitz
    Hey Friends, I have made one form in which there is rich text editor. and i m trying to store the data to database. now i have mainly two problem.. 1) As soon as the string which contents "#"(basically when i try to change the color of the font)     character, then it does not store characters after "#". and it also not store "#" character also. 2) although i had tried....in javascript html.replace("\"","'"); but it does not replace the double quotes to single quotes.

    Read the article

  • RegEx to extract all HTML tag attributes including inline JavaScript

    - by Mike
    I found this useful regex code here while looking to parse HTML tag attributes: (\S+)=["']?((?:.(?!["']?\s+(?:\S+)=|[>"']))+.)["']? It works great, but it's missing one key element that I need. Some attributes are event triggers that have inline Javascript code in them like this: onclick="doSomething(this, 'foo', 'bar');return false;" Or: onclick='doSomething(this, "foo", "bar");return false;' I can't figure out how to get the original expression to not count the quotes from the JS (single or double) while it's nested inside the set of quotes that contain the attribute's value.

    Read the article

  • checking last char of string in c

    - by radar75
    If I have two types of strings as: const char *str1 = "This is a string with \"quotes escaped at the end\""; const char *str2 = "This is a \"string\" without quotes at the end"; testFn(str1); testFn(str2); int testFn(char *str) { // test & return 1 if ends on no quote // test & return 0 if ends on quote return; } I would like to test if the string ends with a quote " or not What would be a good way of testing this? Thanks

    Read the article

  • How can I extract the nth occurrence of a match in a Perl regex?

    - by Zaid
    Is it possible to extract the n'th match in a string of single-quoted words? use strict; use warnings; my $string1 = '\'I want to\' \'extract the word\' \'Perl\',\'from this string\''; my $string2 = '\'What about\',\'getting\',\'Perl\',\'from\',\'here\',\'?\''; sub extract_quoted { my ($string, $index) = @_; my ($wanted) = $string =~ /some_regex_using _$index/; return $wanted; } extract_wanted ($string1, 3); # Should return 'Perl', with quotes extract_wanted ($string2, 3); # Should return 'Perl', with quotes

    Read the article

  • user table with javaDB and Hibernate from within grails

    - by Ralf
    let's see if I can ask this in an understandable way... I started with grails and created a domain class called user. As far as I understand, Hibernate is used to map this domain class to the database. This works pretty fine with hsqldb. Now I tried to switch to javaDB and get an error message because the table is called "user" (which seems to be a reserved word for javaDB). So a statement like create table user ... will result in an error message. create table "user" ... works, but Hibernate seems not put put the table name in quotes. How can I configure Hibernate to use quotes in order to make it work with my table name? PS: yes, I know, I could map the domain class to another table name... :-)

    Read the article

  • user table with javaDB and hybernate from within grails

    - by Ralf
    let's see if I can ask this in an understandable way... I started with grails and created a domain class called user. As far as I understand, hybernate is used to map this domain class to the database. This works pretty fine with hsqldb. Now I tried to switch to javaDB and get an error message because the table is called "user" (which seems to be a reserverd word for javaDB). So a statement like create table user ... will result in an error message. create table "user" ... works, but hybernate seems not put put the table name in quotes. How can I configure hybernate to use quotes in order to make it work with my table name? PS: yes, I know, I could map the domain class to another table name... :-)

    Read the article

  • Best/Most Comprehensive API for Stocks/Financial Data

    - by Wilco
    What is the most recommended free/public API for accessing financial market stats and stock quotes (preferrably real-time quotes)? I'm not too picky about how it's exposed (SOAP, REST, some proprietary XML setup, etc.), as long as it's got some decent documentation. I'm planning to build a simple web dashboard in PHP with some basic data (basically a quick-n-dirty homepage), but may want to grow it into a full blown web app eventually. Any thoughts? As I find some, I'll post a list here (feel free to comment if you've used any of them before): Free opentick (soprano) Not Free XigniteRealTime

    Read the article

  • M-V-VM, isn't the Model leaking into the View?

    - by BFree
    The point of M-V-VM as we all know is about speraration of concerns. In patterns like MVVM, MVC or MVP, the main purpose is to decouple the View from the Data thereby building more flexible components. I'll demonstrate first a very common scenario found in many WPF apps, and then I'll make my point: Say we have some StockQuote application that streams a bunch of quotes and displays them on screen. Typically, you'd have this: StockQuote.cs : (Model) public class StockQuote { public string Symbol { get; set; } public double Price { get; set; } } StockQuoteViewModel.cs : (ViewModel) public class StockQuoteViewModel { private ObservableCollection<StockQuote> _quotes = new ObservableCollection<StockQuote>(); public ObservableCollection<StockQuote> Quotes { get { return _quotes; } } } StockQuoteView.xaml (View) <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:WpfApplication1" Title="Window1" Height="300" Width="300"> <Window.DataContext> <local:StockQuoteViewModel/> </Window.DataContext> <Window.Resources> <DataTemplate x:Key="listBoxDateTemplate"> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Symbol}"/> <TextBlock Text="{Binding Price}"/> </StackPanel> </DataTemplate> </Window.Resources> <Grid> <ListBox ItemTemplate="{StaticResource listBoxDateTemplate}" ItemsSource="{Binding Quotes}"/> </Grid> </Window> And then you'd have some kind of service that would feed the ObservableCollection with new StockQuotes. My question is this: In this type of scenario, the StockQuote is considered the Model, and we're exposing that to the View through the ViewModel's ObservableCollection. Which basically means, our View has knowledge of the Model. Doesn't that violate the whole paradigm of M-V-VM? Or am I missing something here....?

    Read the article

  • PHP JSON encode output number as string

    - by mitch
    I am trying to output a JSON string using PHP and MySQL but the latitude and longitude is outputting as a string with quotes around the values. This causes an issue when I am trying to add the markers to a google map. Here is my code: $sql = mysql_query('SELECT * FROM markers WHERE address !=""'); $results = array(); while($row = mysql_fetch_array($sql)) { $results[] = array( 'latitude' =>$row['lat'], 'longitude' => $row['lng'], 'address' => $row['address'], 'project_ID' => $row['project_ID'], 'marker_id' => $row['marker_id'] ); } $json = json_encode($results); echo "{\"markers\":"; echo $json; echo "}"; Here is the expected output: {"markers":[{"latitude":0.000000,"longitude":0.000000,"address":"2234 2nd Ave, Seattle, WA","project_ID":"7","marker_id":"21"}]} Here is the output that I am getting: {"markers":[{"latitude":"0.000000","longitude":"0.000000","address":"2234 2nd Ave, Seattle, WA","project_ID":"7","marker_id":"21"}]} Notice the quotes around the latitude and longitude values.

    Read the article

  • How to export SQL Server 2005 query to CSV

    - by jmgant
    I want to export some SQL Server 2005 data to CSV format (comma-separated with quotes). I can think of a lot of complicated ways to do it, but I want to do it the right way. I've looked at bcp, but I can't figure out how to put the quotes around the fields (except concatenating them to the field values, which is ugly). I guess I could do it with sqlcmd and -o, but that seems ugly for the same reason. Is there a bcp way to do it? Is there a reasonable sqlcmd way to do it? Is there some great, simple utility built into the Management Studio that I'm just overlooking?

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >