Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 24/450 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

  - by VGR

  My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

  Read the article

• Dual Boot ubuntu 12.04 and Windows 7 on two separate SSDs with UEFI

  - by Björn

  With the following setup I get a blinking cursor after installation: Windows 7 64bit installed in first SSD (not UEFI, using MBR) Installation of Ubuntu 12.04 64Bit on gpt partioned disk seems to work without problems but does not boot. It stops with a blinking cursor. I used the partitioning scheme described here. Partitioning scheme: sdb1 efi boot partition fat32 sdb2 root btrfs sdb3 home btrfs sdb4 swap Is it possible to mix uefi BIOS with MBR and gpt when using two separate SSDs? I tried grub2 into a MBR as well but it would not install there...

  Read the article

• "isolinux.bin is missing or corrupt", when attempting to boot using disk in USB CD DRIVE

  - by Rodrigo Salazar

  I have an external CD drive which connects to USB. I burned 11.10 Ubuntu image to CD-R. The disk correctly shows me install page when I autoload disk within Windows 7. When I restart to attempt to boot from disk to install Ubuntu I get the following error for a split second before I continues to boot to Windows. "isolinux.bin is missing or corrupt". Clearly my computer knows that this is a Linux disk in the usb cd-drive...What went wrong? edit: I reburned another disk, same error

  Read the article

• ASUS Q500A will not boot from live DVD

  - by Sly

  I just purchased a new PC yesterday, an ASUS Q500A. I downloaded Ubuntu 12.10, burned it to a DVD, and tried to install it. As expected, I came to a screen that asked if I wanted to try, install, OEM install, or check the disc. After going to try, the DVD spins up as if it's about to boot the system and then immediately spins down again to leave a black screen. I've tried several boot options: noacpi nolacpi acpi=off Removing quiet splash -- nolacpi results in the DVD drive not spinning up at all. The rest have no effect. Some stats about the system: Intel i5-3210M processor Intel Integrated Graphics 4000 Any tips on other things to try?

  Read the article

• How to start /usr/bin/bitcoind on boot?

  - by André

  I'm trying to get /usr/bin/bitcoind to start on boot but without success. I have this script on /etc/init/bitcoind.conf description "bitcoind" start on filesystem stop on runlevel [!2345] oom never expect daemon respawn respawn limit 10 60 # 10 times in 60 seconds script user=andre home=/home/$user cmd=/usr/bin/bitcoind pidfile=$home/.bitcoin/bitcoind.pid # Don't change anything below here unless you know what you're doing [[ -e $pidfile && ! -d "/proc/$(cat $pidfile)" ]] && rm $pidfile [[ -e $pidfile && "$(cat /proc/$(cat $pidfile)/cmdline)" != $cmd* ]] && rm $pidfile exec start-stop-daemon --start -c $user --chdir $home --pidfile $pidfile --starta $cmd -b -m end script After creating this script I've run the command: sudo initctl reload-configuration When I restart Ubuntu the "bitcoind" does not start. I only can start "bitcoind" running manually the command: sudo start bitcoind Any clues on how to start "bitcoind" on boot?

  Read the article

• Graphics on boot split into three sections

  - by a sandwhich

  I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

  Read the article

• How to fix the boot loader with an installation disk at hand

  - by Bragboy

  Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

  Read the article

• Computer Boot/Installation Failure

  - by Marcus

  I recently tried to insatll Kubuntu and it failed. It completely removed everything off of my HDD and there is no operating system. Everytime I try to install a Distro it fails during instillation. I got Ubuntu 13.04 to work but it required a reboot and after that it did not work. I tried to re-install Ubuntu but it failed. I have tried Ubuntu, Kubuntu, and Xubuntu and they all failed. With Kubuntu and Xubuntu I get an error saying, "The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot". When I select try (distro) it loads up but the installation won't finish. I do not want to have to try the distro everytime I want to get on it. Any help?

  Read the article

• Laptop takes a long time to boot after Grub menu

  - by Andres

  I am running a Asus R401VJ laptop (Latin America version of N46VJ) that has a Core i7 CPU and 8GB RAM. After my Grub menu, which is displayed for 2 seconds as I set it up, I'm getting a black screen with a blinking white cursor that is increasing my boot time to about 60 seconds. After a while Ubuntu runs fine, I just want to reduce my boot time. I don't know if this has something to do with my never used Nvidia 2GB GeForce GT 635M graphics card. Always when I tried to install the driver, I ended up with a ~600x800 screen resolution, and I fixed it by deleting a file called: xorg.conf from the /etc/X11/ directory, following a suggestion that I read in another forum. I would appreciate detailed answers, I'm still new at Ubuntu.

  Read the article

• Purple screen on boot, iMac

  - by Eugene B

  I have just installed Ubuntu 13.10 (special iMac iso found here) on the new iMac (dual boot). Installation of rEFIt was completed successfully, as well as the installation of Ubuntu itself. After the final reboot, rEFIt sees this distributive and allows the choice. When I select "Boot linux from HD", it sends me to grub screen, where I can select Ubuntu. And then it gets stuck on the purple screen (smpboot: Booting Node 0, Processors #1 -- for the recovery mode) with no further action. Does anybody know a solution to this problem? P.S.: I have also tried both 32 and 64-bit pc distributives (occasionally) with the same result.

  Read the article

• Reinstalling GRUB2 on Ubuntu 12.04 | Windows 7 dual boot after Windows reinstallation

  - by Shasteriskt

  So I had the perfect Ubuntu 12 / Windows 7 dual boot set-up -- until I had to re-install Windows 7. After the deed, GRUB2 was of course wiped out, thus my Ubuntu installation is rendered inaccessible. I have tried these steps: mount /dev/sda5 /mnt #This is where my Ubuntu installation resides. mount /dev/sda1 /mnt/boot #Indicated by the `*` under `Boot` when doing `fdisk -l` mount --bind /mnt/proc /proc mount --bind /mnt/sys /sys mount --bind /mnt/dev /dev sudo chroot mnt sudo grub-install /dev/sda sudo update-grub #Then unmounted everything... Unfortunately, only my Windows 7 has been detected and the Ubuntu entries never appeared in the prompt. Only my Windows 7 installation (/dev/sda1) is available in the GRUB2 menu. How can I rectify this?

  Read the article

• details on USB stick boot disk creation

  - by Deborah Shadovitz

  I am looking at this: http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu I need to create a boot disk to test Ubuntu to make sure it will run on a PC (Compaq Mini CQ10-120LA) I was given. I can create the boot disk off of a Mac (in English) or Windows (but Windows is in Spanish and foreign to me). Questions: 1) What format do I choose for the USB stick? (I wish the instructions stated this.) 2) What is Dash? (Will I know when I run the installer?) 3) Can I do this from a Mac or Windows computer? Or only from Ubuntu?

  Read the article

• I need acpi=off to boot, but this seems to disable wifi

  - by TheExp3rt

  To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Ubuntu cannot boot

  - by Ibrahim Hammad

  I've Ubuntu 12.04 installed along with windows 7. After trying to update the Geforce driver on Ubuntu (already updated on windows), Ubuntu fails to boot. It will only give me a black screen and ask for log in user name and password and stays on the black screen. I've tried to fix it from a boot repair disk, which had generated a long report and then told me that Wubi.exe is not found. How can I retrieve my [revious installation, or fix it please? If not possible what is the best procedure to re install Ubuntu without affecting the partitions please. Regards,

  Read the article

• Ubuntu Server 13.04.3 doesn't boot w/ EFI

  - by user1004816

  I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

  Read the article

• Instruct Ubuntu to boot TORAM from flash drive using unetbootin

  - by Goyuix

  I have used UNetbootin to create an installable / live bootable flash drive from Ubuntu 12.04. However that didn't preserve the normal Ubuntu boot menu which allows to me to enter advanced options. It has a custom menu that I can pick from predefined choices like "Install Ubuntu" and "Try Ubuntu without installing". What I would like is to be able to boot from the USB flash drive, but then be able to remove it from the computer once the desktop has loaded. The laptop I would like to use this on does not have a CD/DVD drive. What do I need to modify on the flash drive to add an option to "Try Ubuntu (RAM)" that passes the TORAM=yes parameter to the initrd options? Are their other things I need to touch/change as well? Bonus: I would guess the answer would also allow for other options like acpi=off as well, but if it is different I would appreciate having that answer too.

  Read the article

• GRUB fatal installation of Ubuntu 11.10 - Dual boot for Win7

  - by zero

  I have win7 installed in my system and I decided to give Ubuntu a try. I formatted my drive as follow : C:\ - For Win7 - 55G D:\ - Data - 40G E:\ - Unallocated space - 55G - This is where the installation of Ubuntu I tried to install with this partition table (All set as logical) /dev/sda6 /boot - 258 mb /dev/sda7 swap - 2000mb /dev/sda8 / /dev/sda9 /home I get this error in the middle of the installation Unable to install GRUB in /dev/sda6 Executing 'grub-install/dev/sda6' failed This is fatal error I followed this article http://www.linuxbsdos.com/2011/05/22/how-to-dual-boot-windows-7-and-ubuntu-11-04/ but it seems not working for Ubuntu 11.10. Am I missing something in the installation? Any feedback will be helpful.

  Read the article

• Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

  - by Kento Locatelli

  I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

  Read the article

• Ubuntu 12.04 boot freezes

  - by Lajos Soukup

  I installed win7 on one of my machines. It works without any problem. Now I can not install Ubuntu 12.04 (11.10, 11.04) because the installation process stops in a very early stage: I can see that ISOLinux was loaded, then I can see some very simple icons, then I can see text messages of the kernel. The last message I can see: [6.177983] sr 5:0:0:0: attached scsi general ss1 type 5 At that point the system stops. I tried different versions (11.04) , I disabled, and then disconnected the hdd, but the same problem occured independently from my actions. I can boot a gparted live cd, but that system can not see my hdd. On the other hand, I can boot the installation cd of the latest stable Debian distribution without any problem, but I would prefer to use Ubuntu, because I use that distribution on all of our machines.s Configuration: Asus P8H61-MLE motheboard, Gigabyte GTS 450, Intel i5, 4gb ram, wd 1T sata hdd Any idea? Best regards, Lajos

  Read the article

• How to remove Ubunto from boot screen?

  - by Alaa M.

  I tried to install Ubuntu 14.04 on my Windows 8, and in the installation wizard I chose "Help me boot from CD". Now I have something like this when I restart the computer: http://i.stack.imgur.com/HxDQr.png If I click Ubuntu I get an error about a missing file (wubildr.mbr). I found a solution here. But that's not my concern now. I don't know if that means I have Ubuntu installed on my computer now or not, but I wanna delete it from the boot screen. I figured that I need to delete its partition, so I went to Disk Management and found the following: http://i.stack.imgur.com/W0oP4.png My question is: which one should I delete?

  Read the article

• Ubuntu missing from hard drive boot

  - by Eoghan

  Ubuntu is the only OS installed on my Acer netbook. Few, if any, problems until, with no warning, it vanished from the boot list for the hard drive. I have been a ble to create a bootable USB to be ablee to use the netbook but have not been able to restore Ubuntu to the hard drive boot list. As you can probabaly tell from the way the problem is described, I am a complete novice so any help you can give should assume no knowledge at all on my part and should be written as if for a simpleton. Thank you.

  Read the article

• Windows 8 and Ubuntu 12.10 dual boot

  - by Marty

  I have been having a tough time getting a new computer (Lenovo h430) that came with windows 8 to dual boot with ubuntu linux. I can get ubuntu to install from a usb drive and can use the live system (ubuntu 12.10) but dual booting has not worked. I have cruised the internet and tried a number of solutions such as easybcd 2.2 and boot repair under linux. I have also gone into the setup screen to try and fix it but the lenovo acromyms in the setup are not illuminating for me. Does anyone know of a clear set of instructions for installing ubuntu on a machine delivered with windows 8 ?

  Read the article

• XUbuntu won't boot

  - by Slava Fomin II

  I can't properly boot my XUbuntu desktop. It just hangs on the console without any visible errors. The only way i can boot it properly is choosing "recovery mode" in GRUB and then selecting "continue booting" in recovery menu. It's really annoying. I provide some logs here: http://www.sendspace.com/filegroup/mQ%2FzdWvVcrjB3dz4vVqjsw Please advise! If you need some additional information i will be glad to provide it. Any hints and support will be much appreciated.

  Read the article

• Safely dual-boot XP and Ubuntu 12.04 Desktop?

  - by Ycart I

  My netbook Acer AOD255 has three primary partitions in it by default - PQSERVICE/recovery (NTFS), Android x86 1.6 (FAT32), and the main WinXP Home SP3 (pre-installed, dual-booted with Android from inside WinXP). I was able to resize all three partitions to give 9GB of unallocated space for a future Ubuntu installation, which can already be booted from a pendrive. Here's my problems: 1.) I don't know how to install Ubuntu on that 9GB space (even if I create an unformatted partition for it) 2.) I currently have no means of reinstalling my XP, or backing-up any data (so I don't want to accidentally wipe out my whole HDD at all) 3.) I want XP and Ubuntu to be dual-booted thru a boot manager like GRUB or something more practical (but google searches confuse me) 4.) When I boot to try Ubuntu, GParted displays my whole drive as unallocated space. It also says "can't have overlapping partitions" or something.

  Read the article

• Can you find the problem in my boot-info

  - by erich

  I'm trying to install Ubuntu 12.04 for two days now. Thats something pretty strange because normally thats done in about half an hour. It doesn't boot whatever I try. I got several different types of not-booting until now. All without significant error messages. Now that I'm running out of ideas I thought maybe one of you is able to find my mistake. The boot info is at http://paste.ubuntu.com/1265205/ If you need any other information I'd be happy to provide it.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >