Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 26/450 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Ubuntu 12.04 won't boot from USB

  - by user986871

  I downloaded Ubuntu 12.04, then using the tool Startup Disk Creator i made the live usb. I checked that it's bootable Device Boot Start End Blocks Id System /dev/sdb1 * 62 15635593 7817766 c W95 FAT32 (LBA) Now on my lap top it boots nicely, but on two other machines that don't have any installation of ubuntu(no Grub) it doesn't boot. I changed the booting order so that USB is before HDD. So i think i did everything i know, but no luck. How can i use this USB drive on other devices that don't have any previous ubuntu installation.

  Read the article

• [solved]livecd won't boot 11.04

  - by user20006

  I bought a brand new computer yesterday (Toshiba Satellite Pro L770-10T : Intel Core i5 2410M, 2,3 GHz, 4096 Mo RAM, nVidia GeForce GT 525M) that simply won't boot any livecd I tried. I am using debian/ubuntu for a long time but this is the first time I can't boot a livecd Here is what I tried without success: Ubuntu 11.04 i386 and x64 both desktop and alternate Debian stable livecd old working ubuntu livecds including 8.x 9.x 10.x On ubuntu-10.04.2-desktop-i386.iso I had a kernel panic On 11.04 packages were corrupted although md5 and sha1 were correct I must add that those were burned on different cds CD-R or CD-RW. Any help would be greatly appreciated! Thanks in advance

  Read the article

• Ubuntu13.10 64 bit installed alongside windows 7 32bit doesn't boot

  - by alone

  I have installed Ubuntu 64-bit alongside windows 7 32-bit. (Windows installed first.) The installation was successful, but when I restart it just goes directly to windows 7 without any sign of existence of Ubuntu. I'm a beginner who just wanted to get familiar with Ubuntu, but now I'm disappointed with it. Someone told me the not booting problem is related to EFI, but now I'm scared to play with this boot stuff because my information might be totally lost. How can I fix this boot problem and get to Ubuntu?

  Read the article

• 12.04 LTS usb wont boot

  - by Niva

  I've tried to install ubuntu 12.04 LTS parallel with Windows 8, on my laptop Clevo m767yu But when I try to boot from USB it just stops when it's trying to read the files. it stops and shows this picture: https://www.dropbox.com/s/np3ptvvmasv7ax2/IMAG0097.jpg If I try to boot from a cd, it stops and shows a cursor blinking. I've tried both usb and cd on other computers, and the both works. I've a little experience with Ubuntu, but I have never had problems with the installing process. Any help will be appreciated!

  Read the article

• Cannot boot from USB to install 12.10

  - by Ramzi Njeim

  i am a long time user of Ubuntu and this is the first time a such thing happens to me. I usually upgrade from a version to an other, but this time i wish to do a clean install. I want to totally remove my 12.04 and do a clean install of 12.10, i created a live USB then i restarted my computer to boot from USB, i got the following error: Product is covered by one or more of the following patents: US5,434,872, US5,732,894, (and many more) Under that i see: PCIe GBE Family Controller Series v2.38 Media test failiure Exiting PXE ROM And then it reboots I've searched a lot for an answer, i guess the problem is with something in my bios, but i didn't find a fix. I would really appreciate a fix for my problem. My laptop is a Toshiba p775 dual boot ubuntu 12.04 and windows 7.

  Read the article

• Ubuntu 11.10 boot: xhost: unable to open display

  - by paulus_almighty

  I've had this papercut for a while now, it's time it was fixed. When I boot up Ubuntu, choosing "Ubuntu...generic" from the grub screen, Ubuntu fails to load. It just sits at the driver/module loading screen. What seems to be the most significant line in this output is "xhost: unable to open display" If I choose "Ubuntu...(recovery mode)" from grub then it loads OK. I don't get why this is. Out of interest I tried enabling boot error logging with #/etc/default/bootlogd BOOTLOGD_ENABLE=Yes but I'm not seeing anything in that file. ETA: I've had this problem since fresh install of 11.10. Here's lshw: $ sudo lshw -C display *-display description: VGA compatible controller product: GF104 [GeForce GTX 460] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:03:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f6000000-f7ffffff memory:e0000000-e7ffffff memory:ec000000-efffffff ioport:bf00(size=128) memory:e8000000-e807ffff

  Read the article

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• GRUB problem after uninstalling mint

  - by Yehonatan Tsirolnik

  I've uninstalled Linux Mint 13 today from my netbook. The netbook was running Windows XP and Linux Mint on dual boot. I've deleted the Linux's partition and now whenever I turn on the computer I get "Partitation not found" grub error... I have no CD drive so I can't insert any repair CDs or XP CD. I'm currently hopeless. And now I can't even load Linux Mint from my USB drive... Can someone help me?

  Read the article

• Windows 7duplicate in boot menu

  - by Mick

  I deploy my Windows 7 with imagex.exe. I do this by means some batch script : Win7_install.bat: cls Diskpart /s Win7_install.txt Imagex /apply Win7_October.wim 1 C: Bcdboot C:\Windows Exit Win7_install.txt: SELECT DISK 0 CLEAN CREATE PARTITION PRIMARY SIZE=102400 SELECT PARTITION 1 FORMAT fs=ntfs LABEL=”SYSTEM” quick ASSIGN LETTER=C CREATE PARTITION PRIMARY SELECT PARTITION 2 FORMAT fs=ntfs LABEL=”DATA” quick SELECT PARTITION 1 ACTIVE EXIT Then after restart I have duplicate entries in boot menu. Anybody have some idea how fix it? Regards

  Read the article

• Easy BCD Help: Dual boot Win7 and Ubuntu 11.10 -- "Add new Entry" for Ubuntu

  - by Bradley Peterson

  I first had Ubuntu 11.10 installed on a single partition on my 750GB hard drive. I then partitioned the hard drive to 500GB (for Ubuntu) in ext4 format (what it already was from the clean install of Ubuntu)....and 250GB for Win7 in NFTS format. Then I installed Win7 onto that 250GB partition. Installation went smoothly and I was successfully booted into Win7 and setting everything up. After I was done doing all the stupid updates from Microsof, I thought I was done and I wanted to go back to Ubuntu. This is where the problem starts Of course I reboot and it goes directly to Win7. I research and find that Win7 has overwritten the Ubuntu bootloader, etc etc.. I don't fully understand it. I download EasyBCD 2.1.2 In EasyBCD, I select "Add New Entry" and select "Linux/BSD" and change the type to "GRUB 2" and name it "Ubuntu" Next, I go to "BCD Deployment" and select "Install the Windows Vista/7 bootloader to the MBR" and click "Write MBR" I reboot, select "Ubuntu" and the purple screen comes up, but NOTHING HAPPENS. If I hit Ctrl+Alt+Del, it goes to the Login menu where it acts normal for about 10-15 seconds, then freezes. It does this repeatedly every time. MY QUESTION: What's wrong here? Why can't I load Ubuntu now? Am I going to have to reinstall Ubuntu with Windows, then set up the bootloader with EasyBCD instead of Ubuntu, THEN Win7? Any and all help is appreciated! -Brad

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• How do I install Ubuntu 13.10 from a partition on my Mac?

  - by Barry

  I am trying to install Ubuntu 13.10 on my Macbook Air. I've previously had no issue installing from a USB stick to this machine. However, I don't currently have access to a USB stick or any external media at all! What I've done so far is partitioned my SSD into 3 partitions. One holds OS X, another is a 5gb partition intended for the install ISO, and a third is intended to be the target for that install. The second two partitions are formatted as FAT. I've used dd (with and without bs=1m) to "burn" my ISO to the small 5gb FAT partition. I also at one point tried using hdituil to convert my ISO file to IMG and went through the same process with same result below. After "burning" my ISO to the small partition, I reboot into Refind. Refind sees my small 5gb partition perfectly well, and when I select that partition it loads GRUB appropriately. However, from here, regardless of what I choose, Ubuntu will start to load and then after a few minutes crash out to: BuzyBox V1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built in commands. (initramfs) unable to find a medium containing a live file system. I've Googled this error and found a number of people encountering it when trying to install from USB, but no solutions seem applicable to my case (installing from a partition on my SSD, to another partition on my SSD). Is there any solution to this, or do I just need to wait a few days until I have access to a USB stick? Many thanks in advance, and apologies for length -- I figured I'd err on the side of being exhaustive rather than having people suggest things I've already tried.

  Read the article

• Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

  - by Sky

  When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

  Read the article

• Boot process enter an infinite loop after installing Ubuntu 11.04 together with Windos 7 and XP

  - by Andreafc

  I have a new computer ACER Aspire X3960 which came with Widows 7 preinstalled. I made a new partition where I installed Windows XP and then I installed in new logical partitions (a Swap, a / and a /home partition) Ubuntu 11.04. At the end of the process, the computer enters the very first screen where it says "press DEL to enter BIOS setup, press F12 to enter BOOT options". After a few seconds, the screen goes blank, the computer beeps and then it presents the same screen again. It doesn't even ever go to the grub options of which operating system I want to start. It just loops there forever. I tried to fix the (eventually damaged) grub following these instructions (unfortunately in german) http://wiki.ubuntuusers.de/GRUB_2/Reparatur from a LiveUSB, which I'm also using to post this question. Now I found here that someone asked for the results of the Boot Info Script. Here are mine (I hope I did right in trying to upload the file): http://paste.ubuntu.com/736032/ Can anybody help? Thank you very much. Andreafc

  Read the article

• Fail to boot after installation onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

  Read the article

• VHD Boot failure in Hyper-V (Win7 boot from vhd)

  - by stuck_again

  I've have a virtual machine with a VHD image that I've copied from Windows 7 to the Hyper-V server. This image was created on Windows 7 (Windows 7 64-bit), and I'm using it on Windows 7 as boot image. Starting this virtual machine with the Hyper-V Manager gives this error: "Boot failure. Reboot and Select proper Boot device or Insert Boot Media in selected Boot device." What do I need to do to boot from this vhd in Hyper-V?

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Unable to boot Ubuntu 13.10 (nVidia GTX 770m and Intel HD 4600)

  - by Raziel Gonzalez

  Ever since I bought this laptop I've been trying to install Ubuntu on it. It came with W8 preinstalled. Up to this point, I've been able to boot in UEFI mode with a black screen. I can tell it's trying to use the nVidia card (there's a led on the computer, depending on the color you can tell which GPU is using) and if I press crtl+alt+F1 I can go to console mode. Taking this advantage I tried to install bumblebee and after a successful install the led that indicates which GPU is being used change, indicating that it switched to the Intel HD 4600 graphics. After the installation I tried to initiate the graphic interface (startx) with no success. Xorg.0.log shows the error: [ 3706.779] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 3706.782] X Protocol Version 11, Revision 0 [ 3706.783] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 3706.783] Current Operating System: Linux ubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 [ 3706.783] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset -- [ 3706.785] Build Date: 15 October 2013 09:23:37AM [ 3706.786] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 3706.786] Current version of pixman: 0.30.2 [ 3706.788] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3706.788] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3706.791] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 2 12:28:52 2013 [ 3706.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3706.792] (==) No Layout section. Using the first Screen section. [ 3706.792] (==) No screen section available. Using defaults. [ 3706.792] (**) |-->Screen "Default Screen Section" (0) [ 3706.792] (**) | |-->Monitor "<default monitor>" [ 3706.792] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3706.792] (==) Automatically adding devices [ 3706.792] (==) Automatically enabling devices [ 3706.792] (==) Automatically adding GPU devices [ 3706.792] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 3706.792] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 3706.792] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3706.792] (II) Loader magic: 0x7ff680918d20 [ 3706.792] (II) Module ABI versions: [ 3706.792] X.Org ANSI C Emulation: 0.4 [ 3706.792] X.Org Video Driver: 14.1 [ 3706.792] X.Org XInput driver : 19.1 [ 3706.792] X.Org Server Extension : 7.0 [ 3706.793] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e8 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64 [ 3706.793] (II) Open ACPI successful (/var/run/acpid.socket) [ 3706.794] Initializing built-in extension Generic Event Extension [ 3706.795] Initializing built-in extension SHAPE [ 3706.796] Initializing built-in extension MIT-SHM [ 3706.797] Initializing built-in extension XInputExtension [ 3706.797] Initializing built-in extension XTEST [ 3706.798] Initializing built-in extension BIG-REQUESTS [ 3706.799] Initializing built-in extension SYNC [ 3706.799] Initializing built-in extension XKEYBOARD [ 3706.800] Initializing built-in extension XC-MISC [ 3706.801] Initializing built-in extension SECURITY [ 3706.802] Initializing built-in extension XINERAMA [ 3706.802] Initializing built-in extension XFIXES [ 3706.803] Initializing built-in extension RENDER [ 3706.804] Initializing built-in extension RANDR [ 3706.804] Initializing built-in extension COMPOSITE [ 3706.805] Initializing built-in extension DAMAGE [ 3706.806] Initializing built-in extension MIT-SCREEN-SAVER [ 3706.806] Initializing built-in extension DOUBLE-BUFFER [ 3706.807] Initializing built-in extension RECORD [ 3706.807] Initializing built-in extension DPMS [ 3706.808] Initializing built-in extension X-Resource [ 3706.809] Initializing built-in extension XVideo [ 3706.809] Initializing built-in extension XVideo-MotionCompensation [ 3706.810] Initializing built-in extension SELinux [ 3706.811] Initializing built-in extension XFree86-VidModeExtension [ 3706.811] Initializing built-in extension XFree86-DGA [ 3706.812] Initializing built-in extension XFree86-DRI [ 3706.812] Initializing built-in extension DRI2 [ 3706.812] (II) "glx" will be loaded by default. [ 3706.812] (WW) "xmir" is not to be loaded by default. Skipping. [ 3706.812] (II) LoadModule: "dri2" [ 3706.812] (II) Module "dri2" already built-in [ 3706.812] (II) LoadModule: "glamoregl" [ 3706.813] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 3706.813] (II) Module glamoregl: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.2.901, module version = 0.5.1 [ 3706.813] ABI class: X.Org ANSI C Emulation, version 0.4 [ 3706.813] (II) LoadModule: "glx" [ 3706.813] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3706.813] (II) Module glx: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.3, module version = 1.0.0 [ 3706.813] ABI class: X.Org Server Extension, version 7.0 [ 3706.813] (==) AIGLX enabled [ 3706.814] Loading extension GLX [ 3706.814] (==) Matched intel as autoconfigured driver 0 [ 3706.814] (==) Matched vesa as autoconfigured driver 1 [ 3706.814] (==) Matched modesetting as autoconfigured driver 2 [ 3706.814] (==) Matched fbdev as autoconfigured driver 3 [ 3706.814] (==) Assigned the driver to the xf86ConfigLayout [ 3706.814] (II) LoadModule: "intel" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3706.814] (II) Module intel: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.3, module version = 2.99.904 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "vesa" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3706.814] (II) Module vesa: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 2.3.2 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "modesetting" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3706.814] (II) Module modesetting: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 0.8.0 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "fbdev" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3706.815] (II) Module fbdev: vendor="X.Org Foundation" [ 3706.815] compiled for 1.14.1, module version = 0.4.3 [ 3706.815] Module class: X.Org Video Driver [ 3706.815] ABI class: X.Org Video Driver, version 14.1 [ 3706.815] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 3706.815] (II) VESA: driver for VESA chipsets: vesa [ 3706.815] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3706.815] (II) FBDEV: driver for framebuffer: fbdev [ 3706.815] (--) using VT number 7 [ 3706.819] (WW) Falling back to old probe method for modesetting [ 3706.819] (EE) open /dev/dri/card0: No such file or directory [ 3706.819] (WW) Falling back to old probe method for fbdev [ 3706.819] (II) Loading sub module "fbdevhw" [ 3706.819] (II) LoadModule: "fbdevhw" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3706.819] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 0.0.2 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "vbe" [ 3706.819] (II) LoadModule: "vbe" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 3706.819] (II) Module vbe: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.1.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "int10" [ 3706.819] (II) LoadModule: "int10" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libint10.so [ 3706.819] (II) Module int10: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.0.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) VESA(0): initializing int10 [ 3706.820] (EE) VESA(0): V_BIOS address 0x0 out of range [ 3706.820] (II) UnloadModule: "vesa" [ 3706.820] (II) UnloadSubModule: "int10" [ 3706.820] (II) Unloading int10 [ 3706.820] (II) UnloadSubModule: "vbe" [ 3706.820] (II) Unloading vbe [ 3706.820] (EE) Screen(s) found, but none have a usable configuration. [ 3706.820] (EE) Fatal server error: [ 3706.820] (EE) no screens found(EE) [ 3706.820] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 3706.820] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 3706.820] (EE) [ 3706.827] (EE) Server terminated with error (1). Closing log file. I also saved the dsmeg output to see if it can be of any help. In order to be able to get to this stage I had to boot with nomodeset option and removed quiet and splash. Anyone got this same error? Any guidance? I've tried other linux distros and so far the only one that is able to boot is Opensuse 12.3 without any issues (but only when I switch to legacy mode instead of UEFI).

  Read the article

• How to Create a bootable Ubuntu USB flash drive from terminal

  - by Avinash Raj

  Is there any possibility to create a Ubuntu USB flash drive from terminal without using any third-party applications like YUMI,Unetbootin,etc. I tried to create a bootable ubuntu flash drive with dd method, sudo umount /dev/sdb sudo dd if=/path/to/ubuntu.iso of=/dev/sdb bs=1M It create files on the USB disk,but when i try to boot the usb disk it says Operating System Not Found error. Any help will be appreciated!

  Read the article

• How to boot load the kernel using EFI stub (efistub) loader?

  - by Pro Backup

  I have Ubuntu 14.04 running in UEFI mode as only operating system, no dual-boot here. The kernel version is 3.13.0-24-generic. There is an EFI partition. In this case the EFI partition is not at the default /dev/sda1 but at /dev/sda3 because I did actually convert BIOS mode to EFI mode. I have used the grub-efi-amd64 package, though that actually loads GRUB boot menu from UEFI firmware boot menu (UEFI boot loads \EFI\ubuntu\grubx64.efi). I want to skip that double boot menu loading step, and boot faster, directly from UEFI into the kernel. The Ubuntu kernels since 12.10 have "Kernel EFI stub loader" feature. I know I do need to copy the Ubuntu kernel to the EFI partition (possibly rename) and create an entry in UEFI boot menu (for instance using efibootmgr). Which exact terminal commands are necessary to do this?

  Read the article

• ubuntu stuck in a login loop after editing profile file

  - by varunit

  I'm stuck in a login loop now. What I did was edited /etc/profile as root and added the following line export PATH = /opt/my jdk 7 path/bin:$PATH After logging out and tried to login, I cannot I have tried booting in recovery mode, entered root prompt and tried to edit the file in vi but it always opens in read only mode and hence cannot be saved. I just need a way to delete that line and boot into ubuntu again. Please help me out guys..

  Read the article

• Mysql partition error?

  - by drake

  I have a kinda table like this: CREATE TABLE test ( id MEDIUMINT NOT NULL AUTO_INCREMENT, user VARCHAR(30), time VARCHAR(30), status VARCHAR(30), origin VARCHAR(30), PRIMARY KEY (id) ) ENGINE=MyISAM; PARTITION BY RANGE(id) ( PARTITION p0 VALUES LESS THAN (500000), PARTITION p1 VALUES LESS THAN (1000000), PARTITION p2 VALUES LESS THAN (1500000), PARTITION p3 VALUES LESS THAN (2000000), PARTITION p4 VALUES LESS THAN (2500000) ) I have Three questions: 1) I have here an #1064 error; 2) How can i set split test.user as alphabetic range in partition; 3) How can i check that the partition was successful;

  Read the article

• Disable Ethernet permanently to speed up boot time

  - by Anwar Shah

  I do not use the wired Ethernet Card. It seems to me that, Ubuntu is always trying in boot time to check the network via eth0, Which consumes some times and I guess this may slow down the boot process a bit. My dmesg output is below (partial) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985651] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 2.056261] firewire_core: created device fw0: GUID 00023f87af41fd7d, S400 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 3.710435] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) A big time here..... 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 13.466642] ADDRCONF(NETDEV_UP): eth0: link is not ready 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.125296] Adding 1050620k swap on /dev/sda6. Priority:-1 extents:1 across:1050620k 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.226952] EXT4-fs (sda9): re-mounted. Opts: (null) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335012] snd_hda_intel 0000:00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335091] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335128] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.346410] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.428551] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.436958] cfg80211: Calling CRDA to update world regulatory domain 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.476550] Linux video capture interface: v2.00 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.486385] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008) So, My question is How can I disable the Ethernet card completely, so that kernel will not try to use that?

  Read the article

• How to Skip the Start Screen and Boot to the Desktop in Windows 8.1

  - by Mark Wilson

  For almost everyone who made the upgrade, Windows 8 proved to be something of a disappointment for one reason or another. Windows 8.1 (or Windows Blue) was released to address many of the issues users had complained about including reintroducing the ability to boot straight to the desktop. Being able to boot to the desktop rather than the Start screen is something that people have been clammering for ever since the first preview versions of Windows 8 were unveiled. There have been various third-party tools released as numerous workarounds used to get around the problem, but now it is an option that is built directly into the operating system. You’ll need to have downloaded and installed the update in order to proceed, but once you have done this, things are very simple. When you have Windows up and running after the upgrade, right click an empty section of the taskbar and select properties to bring up the newly named “Taskbar and Navigation properties” dialog.  Move to the Navigation tab and look in the “Start screen” section in the lower half of the dialog. Check the box labelled ‘Go to the desktop instead of Start when I sign in” and click OK.    

  Read the article

• VNC grey screen and start on boot 12.04

  - by Siriss

  I have 12.04 LTS installed and I am trying to get VNC to work. I want to be able to connect to existing sessions, and have it start on boot. I followed this guide and have left a comment to try and fix my problems but no dice. I have also tried all solutions I have found on google, including the one here, but I could not get it to work (I am missing something easy I am sure). When I connect to the VNC session I get a grey screen with three checkboxes: Accept clipboard from viewers Send clipboard to viewers Send primary selection to viewers Here is my xstartup: #!/bin/sh # Uncomment the following two lines for normal desktop: unset SESSION_MANAGER # exec /etc/X11/xinit/xinitrc gnome-session -session=gnome-classic & [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources xsetroot -solid grey vncconfig -iconic & #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & I have also edited my to include: /usr/bin/vncserver -geometry 1024x768 It does not start on boot, but when I run the command it starts, but I get the grey screen. Any help would be greatly appreciated. Thank you!!

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >