Search Results

Search found 761 results on 31 pages for 'playback'.

Page 24/31 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• How can I fix my vista PCs screen resolution and refresh rate

  - by Antony Scott

  I have a media PC running media portal hooked up to my HDTV via HDMI. The TV is a couple of years old now, so only supports 1080i, which is 1920x1080@25Hz. I've got it connected to my PC via a HDMI compatible AV receiver. If I power up the amp (wait for it to boot fully) followed by the TV| and finally the PC, all is well and I get a picture. If I deviate from that sequence, or don't wait for the amp to book up fully, or even switch the amp to another video input (for example, my PS3). The PC sees this and defaults the screen resolution/refresh rate to 1920x1080@60Hz. So, I end up with a blank screen. To fix this I have to use UltraVNC from a PC and change the refresh rate back to 25Hz. So, is there a way to turn off that auto detection, or to manually define what resolution/refresh rates the monitor can do. I'm using the on-board Radeon 3200 video and do not have any of the AMD software installed as it seems to cause problems with video playback. So, I'm looking for a native vista fix, or possible some 3rd party software.

  Read the article

• ATI HDMI Audio disappears in Windows 7 when a TV is connected

  - by jsalonen

  So far I have unsuccessfully googled for HOURS with no luck fixing this very annoying problem. The settings is the following: I have PC running Windows 7 RC (64-bit) Video card is a ATI Radeon 4850 series card (Sapphire HD 4850 512MB to be exact) The video card has HDMI out with built-in audio chip I have an HDMI cable connecting the PC to a TV (Sony Bravia series) The problem is that when I connect the HDMI cable to the TV, the ATI HDMI Sound output device disappears completely from the list of playback devices in Windows. As a workaround I can restore the audio by re-installing the HDMI audio driver. However, when I disconnect the TV the driver disappears again. So basically, every time I want to watch stuff on my TV, I have to reinstall audio driver, which of course is VERY annoying. EDIT: I have figured out that I do not need to re-istall the HDMI audio driver to restore sound; I only need to reboot my computer with the HDMI cable plugged in to restore the audio driver. This suggests that the problem has something to do with information passed from TV to computer, which makes my HDMI Audio driver disappear. Are there any other, more elegant workarounds for this problem? All help is much appreciated!

  Read the article

• SPDIF passthrough not working in Windows 7

  - by adriangrigore

  Hi, I'm running Windows 7 on a computer with an Audigy Platinum eX sound card connected to a surround receiver via optical cabling. Sound works fine when listening to non-surround audio sources, such as windows sounds or MP3. However, when I view a DVD in Media Center and the SPDIF passthrough kicks in, I can only hear an awful noise instead of the movie soundtrack. Also, the receiver does not show the Dolby Digital or DTS symbol, but stays at Dolby Prologic, so it seems it doesn't identify the sound encoding properly. I could switch off SPDIF passthrough and use the sound card's decoder instead, but that's not an option for me since it would create more problems with regular MP3 playback via additional Stereo Receiver which is also connected to the same sound card. I've tried both the default Audigy drivers that come with Windows 7 and the latest drivers from the Soundblaster website, but the problem remains unchanged. Also, I have ensured that the receiver's Dolby Digital decoder is not broken by successfully connecting it to my PS3 to view a Dolby Digital DVD. Besides, SPDIF passthrough was working fine in Vista before I upgraded to Windows 7. Is there anything else I could try?

  Read the article

• How to extract a Vorbis stream from a WAVE file?

  - by H.B.

  I would like to move the Vorbis stream into an ogg container but ffmpeg does not seem to recognize the stream. Even though MPlayer gives this output upon playback: Opening audio decoder: [acm] Win32/ACM decoders Loading codec DLL: 'vorbis.acm' Loaded DLL driver vorbis.acm at 10000000 Warning! ACM codec reports srcsize=0 AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000-176400) Selected audio codec: [vorbisacm] afm: acm (OggVorbis ACM) ffmpeg: ffmpeg -i Source.wav -acodec copy Target.ogg Input #0, wav, from 'Source.wav': Duration: 00:02:15.17, bitrate: 128 kb/s Stream #0.0: Audio: qg[0][0] / 0x6771, 44100 Hz, 2 channels, 128 kb/s [ogg @ 00000000003096C0] Unsupported codec id in stream 0 Output #0, ogg, to 'Target.ogg': Metadata: encoder : Lavf53.6.0 Stream #0.0: Audio: qg[0][0] / 0x6771, 44100 Hz, 2 channels, 128 kb/s Stream mapping: Stream #0.0 -> #0.0 Could not write header for output file #0 (incorrect codec parameters ?) Of course this does not necessarily need to be done via ffmpeg, any method that is workable would be fine... I have cut down one of the files to 512KB: sample.wav (Changed two chunk size fields in the wave header to account for this, the embedded stream is cut "without notice")

  Read the article

• Best way to convert episodic DVDs for Windows Media Center?

  - by Roger Lipscombe

  I'm archiving my DVD collection. My goal is to be able to play them back in Windows Media Center. For feature-length DVDs, I'm using AnyDVD and CloneDVD, which is working well. For playing back TV shows (and other episodic content), I'm using Media Browser, which doesn't support a VIDEO_TS folder per episode. It expects the shows to be broken up into one file per episode (e.g. "Willo the Wisp - S01E12.avi"). For this, I'm attempting to use Handbrake, which, for extracting the episodes from DVD (or already-ripped VIDEO_TS folder), is working pretty well. The problem that I have is that the default x264 encoder over-compresses the resulting video stream, which results in hideous artifacts in animated shows. The aforementioned Willo the Wisp is a particularly bad example, because the original DVD is particularly "noisy". If I switch to using the ffmpeg encoder, the artifacts are gone in Windows Media Player, but I can't get the resulting files to play back in Windows Media Center. I see the first frame, and then there's an error message. I've installed the CCCP codec collection, but it doesn't seem to have made any difference. So: what's the best way to convert VIDEO_TS to individual episode files for playback in Windows Media Center?

  Read the article

• Is there any free software to check for issues with a DVD drive?

  - by AgentConundrum

  I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

  Read the article

• Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

  - by royatl

  My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

  Read the article

• Digitize video?

  - by kire

  I got some movies on a VCR that i want to move to my computer somehow. (for personal use) I have a video capture card and all hardware required. I'm looking for the software - programs, codecs etc. I like the format that most torrents come in and got some of these i'd like to use as reference for comparison. How can i see what codec, bitrate, etc a movie is using so i can pick this and know that it will work and look good. For AVI-files the bitrate is visible in explorer but it doesn't mention the codec used and i also have a lot of MKV-files that explorer can't handle. All kinds of tips, tricks and other suggestions are welcome. This is completely new to me. How do I avoid that video/audio gets out of sync for example, many movies you download have audio out of sync so i guess this can happen quite easily. The encoding-program has to run on windows and for playback the movies should work on at least VLC for windows.

  Read the article

• Getting old bluetooth headset out of standby on Windows 7

  - by luagh45

  I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

  Read the article

• Asus MyCinema U3100mini Choppy

  - by dsimcha

  I'm running an Asus MyCinema U3100mini ATSC on Windows 7 64-bit. When I play live TV in Windows Media Center, it's very choppy and uses 500+ MB of RAM, I'm guessing due to the hard drive buffering functionality. Is there any way to disable the live TV pause buffer completely? If not, can anyone recommend alternative software that: Works with the MyCinema. Is lightweight and not horribly bloated with features I'll never use like Windows Media Center is. Edits: This is a dual boot system. I've discovered that the tuner actually works fine on XP. It also works fine on my other computer, which has slower hardware and also runs Windows 7 64-bit. The problem actually seems to be with playback at large screen sizes, not with hard drive buffering. Everything works fine below a certain window size and fails for large windows or full screens. Also, the same thing seems to happen whether playing live or recorded TV. As far as the obvious stuff goes, I have the latest video drivers from ATI for my Radeon x1050.

  Read the article

• No audio in my ubuntu system

  - by hap497

  Hi, I am running ubuntu 9.10. But there is no sound in my environment. When I go to System-Preference, there is no 'sound' entry there. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: I82801AAICH [Intel 82801AA-ICH], device 0: Intel ICH [Intel 82801AA-ICH] Subdevices: 1/1 Subdevice #0: subdevice #0 $ lsmod Module Size Used by usb_storage 52576 3 binfmt_misc 8356 1 vboxvfs 34620 0 vboxvideo 1884 1 drm 159584 2 vboxvideo agpgart 34988 1 drm snd_intel8x0 30168 2 snd_ac97_codec 101216 1 snd_intel8x0 ac97_bus 1532 1 snd_ac97_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28576 0 iptable_filter 3100 0 snd_seq_midi 6432 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi ppdev 6688 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq psmouse 56500 0 serio_raw 5280 0 snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device i2c_piix4 9932 0 parport_pc 31940 0 soundcore 7264 1 snd snd_page_alloc 9156 2 snd_intel8x0,snd_pcm vboxguest 143836 7 vboxvfs lp 8964 0 parport 35340 3 ppdev,parport_pc,lp pcnet32 32644 0 mii 5212 1 pcnet32 floppy 54916 0 ~:987:2$ lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter 00:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 40) 00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service 00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:06.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 0 00:0b.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ~:988:3$

  Read the article

• tod to avi mpg wmv, convert tod (.mpeg-2) to avi mpg wmv for Movie Maker.

  - by yearofhao

  Need to convert .tod (mpeg-2) to avi mpg wmv download from JVC Everio to PC with tod to avi mpg wmv converter convert tod to uncompressed/raw avi, mpg wmv Have a JVC Everio camcorder? Then you may encounter problems when saving the .tod files to your computer windows movie maker says it can't recognize and edit them to make videos. You may play them using media player but the problem is how to edit them? The bundled software Power cinema could be annoying, since you can only edit when the camera is plugged in to the PC - Power cinema can’t seem to edit from the saved clips alone. So, how do you save them to PC so that you can edit them without the camera and also using windows movie maker? JVC Everio Tod to avi mpg wmv converter costs you a penny to but help you perfectly convert tod file to AVI, MPG, WMV, YouTube FLV, MP4, DV, QuickTime.MOV or other common video formats with fast speed and while keeping the original HD quality. High definition TOD recordings from JVC Camcorders can playback fluidly, convert smoothly and edit professionally on with iOrgsoft TOD file converter iOrgsoft tod to avi mpg wmv Converter has been mostly used by Windows users who use Windows 7 or Vista, after the .tod (mpeg-2 the same codec) downloaded from JVC Everio to PC, it’s best to convert tod to avi, convert to xvid divx, convert tod to uncompressed avi or convert tod to raw avi, tod to mpg, tod to wmv, which are three Windows movie maker best formats to import. TOD to avi mpg wmv converter is a competent video-editing program that allows you to clip/cut TOD video clip, crop the video to encode, and help transfers video to devices like iPhone, iPod, to HDTV connected with Apple TV.

  Read the article

• How to fix Quicktime video color problems on nVidia chipset and Windows XP?

  - by Matthew Glidden

  My laptop frequently plays video as if in very low-color mode. Though the sound remains clear, it looks terrible, showing only a few shades of red, blue, or yellow. (It's even worse than 8-bit color.) The problem doesn't happen consistently, so I'm looking for troubleshooting advice or known solutions. I use a Dell Latitude D620 laptop with Windows XP, on-board nVidia video chipset, Quicktime, and multiple monitors (laptop screen + VGA-connected LCD). Color problems happen in each application I tried, iTunes, a browser, and the Quicktime standalone player. It doesn't happen right after reboot, so could be from a sleep-wake cycle, or at least being on for an extended period. Google results suggest reinstalling nVidia drivers, which I've done several times with no change. I have found 2 workarounds. Reboot, sacrificing significant time and disrupting work In nVidia control panel, change color to 16-bit, and then back to 32-bit This happens with all video playback, so it's definitely not one corrupt file. I use workaround #2 consistently, but would love a longer-term solution.

  Read the article

• Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip

  - by OneWorld

  After approximately 5-15 min of listening to music my subwoofer begins to make terrible noises. He's just "coughing". That began after 6 months I had this computer. Now I found out, that I can temporarily fix this problem by "restarting" the audio stream of the application that plays music. For example reloading last.fm page (reloads the flash file). Another way to reset the audio playback is switching the speaker configuration shown below in the screenshot. According to many posts on the internet like http://www.tomshardware.co.uk/forum/52918-20-acer-aspire-6935g-speaker-problem ACER support isn't any help Exchanging hardware doesn't fix the problem Even the later models have this problem Turning off the volume of the subwoofer is not an option to me. I still have warranty (I bought an extension of one year). I already tried about 15 versions of the Realtek driver with no success. I am not sure but MAYBE the problem did not occur on the original windows vista that was shipped with this computer. However, I removed the original windows for good reasons (english). What do you suggest me? Did anyone fix this problem? Maybe by writing a script which resets the audio streams every 5 minutes? Shall I take the effort to deal with the acer support until they give me another model? (I won't have a computer than for a longer time, will spend money on telephone hotlines (1,30 EUR / min)......) Here are additional infos, if they are any help: Windows 7 64 Bit (Original was Windows Vista Home Premium 32 Bit) All specs Audio driver version:

  Read the article

• No sound through headset - only mic is working

  - by Kristis

  I noticed that no sound is being played to my headphones. The laptop has a conexant sound card together with the sounds apps provided. But the thing is that I also noticed that now instead of one playback device - 2 are presented: speakers and headphones. And while speakers do play sound nicely - even test sound are not played through headphone output. Also, headphone output does not have a jack assigned to it, while speakers have L R Rear panel Analog Jack(my laptop does not have a jack on the back - only on the right). Also - my headphones have a mic as well - and when I plug it in - the mic is working(using top panel digital jack),but the headphones themselves are not. And laptop is recognizing when audio device is plugged in. And I checked the headset on other devices - the headphones are working. I have tried updating drivers, rolling back drivers and completely uninstalling drivers and then restarting - nothing helped. I imagine that I somehow need to reconfigure the jack configuration just have no idea how and where. Any suggestions? Thanks

  Read the article

• IIS login / logout interferes with media player

  - by Mark Sowul

  So I'm listening to music with Windows Media Player, going insane because the music randomly stops playback every so often. I finally notice that it correlates with instances of csrss, winlogon, and logonui repeatedly starting and quitting. I finally tracked that down to IIS repeatedly logging on and off due to WebDAV requests going through my user account (my laptop syncing up with OneNote over WebDAV). I see tons of spam in my security event log for the logins. I am surprised that IIS needs to log in this much. This has only been happening for a couple of months. I'm not sure where the actual problem lies - with IIS, or Media Player, or what, so I figured I'd try and find out if the IIS login behavior is actually abnormal. Is it normal for IIS to log in this much? And is it normal for that to keep spawning winlogon, csrss, and logonui every second or so? I see a constant stream of logon events in the event log every few seconds presumably while OneNote is syncing. Logon (id = 1, source = laptop), Special Logon (id = 1, sets up privileges), Special Logon (id = 1, seems to set up the same privileges), Logon (id = 2, same laptop), Logoff (id = 2), Logoff (id = 1) The DefaultAppPool (only one apparently in use) has its idle timeout set to 20 minutes, and load user profile set to false. Not sure what other settings (if any) might be relevant.

  Read the article

• Logitech QuickCam Pro 9000 & Windows 7 64-bit failing miserably

  - by Saxtus

  I am trying to install a Logitech QuickCam Pro 9000 webcam to Windows 7 64-bit. If I do it without using the Logitech drivers but instead the Windows Update ones, the camera works with low frame rate and without face tracking and all other bells and whistles that it's full driver provides. The moment I install the latest official Logitech driver, the problems begin: Camera works fine, until I decide to go to audio settings of the LWS panel or Windows'. Then LWS freezes and with it everything that tries to output audio. I am not able to open Playback/Recording devices window (it just doesn't appear) and system gets unstable and slow with LWS.EXE process not been able to close forcefully. If I reboot and forget the camera connected, this situation continues and system gets unstable from the beginning. If I reboot without the camera connected, everything works fine until I connect it and try to do something with audio settings of Windows or LWS panel. I should note, that until the freezing occurs, camera works as expected, with full frame rate, face tracking and everything that is expected to do. The soundcard is the ASUS SupremeFX II of the ASUS Striker II Extreme motherboard. Any ideas of what is causing this or what else to try so I can make it work as advertised? Thank you.

  Read the article

• Send keystrokes simultaneously to both host and slave over internet?

  - by donodarazao

  I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

  Read the article

• How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

  - by McCoy

  Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

  Read the article

• h264 inside FLV container vs. MP4 container?

  - by Gotys

  I am developing a tube site, and currently having issues with h264 format . By looking at youtube, I noticed they are putting their hi-def videos into mp4 container, so logically I did the same. Next, I installed mod_h264_streaming for lighttpd to make streaming and timeline-scrubbing work. Problem is, that large files (500mb+ at somewhat high resolution) take for EVER to even start buffering ( I read the flowplayer or other flash players need to download metadata first) . I moved the xmov atom to the front of the file with MP4Box (i tried qt-quickstart too) , and the problem didn't go away. Next I read online I need to interleave audio tracks, so I did that too. No change in slowness. So I tried putting the same exact h264 movie into an FLV container, and the playback buffering starts almost instantly - no slowness. So what am I missing here? Why would I choose MP4 container with mod_264_streaming module , which seems super-slow over a regular FLV container with lighttpd's built-in mod_flv_streaming ? Obviously many websites pick mp4 container , but I fail to understand why ? And as a side question - I tried using HTML5's VIDEO tag to try the same h264 MP4 movie, and the scrubbing is LIGHTING FAST! I looked into lighttpd's log file, and i noticed taht Flash Players append video.mp4?start=234 each time timeline is scrubbed, wheres HTML5's video tag does no such thing . Is this some sort of limitations of Flash ? Why Can't flash streaming be same fast as HTML5 streaming? Thanks to ALL who can help. I very much appreciate this community.

  Read the article

• This .mpg video clip doesn't play well

  - by Roey

  I've installed K-lite mega codec pack v6.9.0 with playback essentials without player. My default and only media player is windows media player. here are the clip's media info: General Complete name : D:\Users\Roey\Downloads\B384MV.mpg Format : MPEG-PS File size : 273 MiB Duration : 4mn 59s Overall bit rate : 7 643 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, BVOP : No Format settings, Matrix : Default Format settings, GOP : M=1, N=15 Duration : 4mn 57s Bit rate mode : Variable Bit rate : 7 363 Kbps Nominal bit rate : 9 000 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Compression mode : Lossy Bits/(Pixel*Frame) : 0.142 Stream size : 261 MiB (96%) Audio ID : 192 (0xC0) Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Duration : 4mn 59s Bit rate mode : Constant Bit rate : 128 Kbps Channel(s) : 2 channels Sampling rate : 44.1 KHz Compression mode : Lossy Stream size : 4.56 MiB (2%) Menu When I play it there is no sound (just a little "kahhhh" noise every 10-20 seconds) and the frames are moving very slow - it "jumps" frames. A blue tray icon [FFa] "ffdshow audio decoder" pops with the following details: Input:MP3, stereo, 44100 Hz (libavocodec) Output:PCM, stereo, 44100 Hz, 16-bit integer Any help will be much appreciated. Thanks

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• How can I remotely display images on my computer?

  - by Jakob

  What I Have: A laptop booted with Ubuntu and a stationary computer dual-booted with Ubuntu and Vista, both connected through a wireless ad-hoc network. What I Want: I want a way to display images in fullscreen on my stationary, using my laptop as a "remote control". I want to be able to choose another picture at any time and have my stationary computer remain in fullscreen mode at all times. Preferably, I should also be able to display just an empty (black) screen. How can I arrange for this? What I Have Tried: I have tried simply SSH:ing into my stationary computer and opening the image files using an image viewer, but all of the ones that I have tried (Eye of Gnome, Mirage, Gwenview, and others) open a new window for every new image. I don't know how to force them into using a single instance. I have tried using the VLC remote control command line interface, but apart from seeming somewhat unreliable (exiting with segmentation faults at one point), it also displays some images with a green border and forces me to pause playback in order for the image to remain on screen. Bonus Question: In my final setup, I also need to play music through my stationary computer's speaker and have the ability to switch to another track at any point, like with the images. Preferably, I would like to control the images and the audio through the same interface. How can I best achieve this?

  Read the article

• Cut (smart edit) .mts (AVCHD Progressive) files un Ubuntu Lucid

  - by pts

  I have a bunch of .mts files containing AVCHD Progressive video recorded by a Panasonic camera, and I need software on Ubuntu Lucid with which I can remove the boring parts, and concatenate the interesting parts, all this without reencoding the video stream. It's OK for me to cut at keyframe boundary. If Avidemux was able to open the files, it would take about 60 hours of work for me to cut the files. (At least that was it last time I tried with similar videos, but of a file format supported by Avidemux.) So I need a fast, powerful and stable video editor, because I don't want that 60 hours of work go up to 240 or even 480 hours just because the tool is too slow or unstable or has a terrible UI. I've tried Avidemux 2.5.5 and 2.5.6, but they crash trying to open such a file, even if I convert the file to .avi first using mencoder -oac copy -ovc copy. mplayer can play the files. I've tried Avidemux 2.6.0, which can open the file, but it cannot jump to the previous or next keyframe etc. (if I make it jump to the next keyframe, and then to the previous keyframe, it doesn't end up at the original keyframe, sometimes displays an error etc.). Also I'm not sure if Avidemux 2.6.x would let me save the result without reencoding. I've tried Kdenlive 0.7.7.1, but playback is very choppy, and it cannot play audio at all (complaining that SDL cannot find the device; but many other programs on the system can play audio). It would be a pain to work with. I've tried converting the .mts file to .mkv using ffmpeg -i input.mts -vcodec copy -sameq -acodec copy -f matroska output.mkv, but that caused too much visible distortions in the video in both mplayer and Avidemux. I've tried converting the .mts file with TsRemux.exe, but Avidemux 2.5.x still can't open that file. Is there another program to cut and concatenate the files? Is there a preprocessor which would create a file (without reencoding the video) on which Avidemux wouldn't crash?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >