Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 24/285 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Realtek HD Audio Driver for Ubuntu 12.04?

    - by Shifat Taushif
    I recently switched to Ubuntu 12.04 on my Toshiba laptop. I haven't had any issues except for one. I realized that there is a red light coming out of my earphone jack. It's something like this: http://i.stack.imgur.com/gokuH.jpg I looked in the folder that Toshiba created for installing drivers , then I found out that they had installed this driver for my sound card : Realtek HD Audio Driver v6.0.1.5689_withMaxxAudio_Compal(20080908) I'm guessing that the sound card supports Optical Audio Output. I also found out that when I mute the speakers, the light goes away. But when I unmute it, it comes back. I don't really mind having it but it drains my battery. So, is there a Ubuntu version for my sound card driver? Thanks in advance.

    Read the article

  • Unable to connect to Samba printer

    - by user127236
    I have a headless Ubuntu 12.04 server for files and printers. It shares files via Samba just fine. However, the HP PSC-750xi connected to the server via USB is not accessible from my Ubuntu 12.04 laptop. I can browse for it in the Printing control panel, but any attempt to authenticate my ID to the printer with my user credentials results in the error "This print share is not accessible". I have included the Samba smb.conf file below. Any help appreciated. Thanks... JGB # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. # A well-established practice is to name the original file # "smb.conf.master" and create the "real" config file with # testparm -s smb.conf.master >smb.conf # This minimizes the size of the really used smb.conf file # which, according to the Samba Team, impacts performance # However, use this with caution if your smb.conf file contains nested # "include" statements. See Debian bug #483187 for a case # where using a master file is not a good idea. # #======================= Global Settings ======================= [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no writeable = yes server string = %h server (Samba, Ubuntu) unix password sync = yes workgroup = WORKGROUP syslog = 0 panic action = /usr/share/samba/panic-action %d usershare allow guests = yes max log size = 1000 pam password change = yes ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of # server string is the equivalent of the NT Description field # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects # Cap the size of the individual log files (in KiB). # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. # Do something sensible when Samba crashes: mail the admin a backtrace ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. # security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. # If you are using encrypted passwords, Samba will need to know what # password database type you are using. # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username ;[homes] ; comment = Home Directories ; browseable = no # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. ; read only = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes ; valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers browseable = yes writeable = no path = /var/lib/samba/printers # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom [mediafiles] path = /media/multimedia/

    Read the article

  • NVIDIA Geforce gt 555m driver install problem

    - by mir
    I recently installed ubuntu 12.04 on my asus N55SF, which runs nvidia geforce gt 555m and an integrated graphics, via optimus but after installation i found no such thing on ubuntu. i went o nvidia website and installed the driver from there(ver 259.59 i guess) after reboot, i was stuck at 640x480 resolution and my card was still undetected i reinstalled ubuntu but this time i installed bumblebee, but the system settings still shows the graphics as 'unknown' i dont know whether the driver has been installed or not, but from the 'unknown' i figure its not there. when i run sudo nvidia-settings i get this msg "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." however i can run the settings page by sudo nvidia-settins -c :8 i just want to know why ubuntu hasnt still detected the gpu? is it because bumblebee disables it? and i forgot one v important thing..I AM A NOOB :(

    Read the article

  • I cannot install a proporietary fglrx driver

    - by Chris
    OK my install failed while installing the amd proprietary driver. I keep seeing references to a Nvidia driver, but I do not have or even want anything pertaining to Nvidia. Here are my latest entries for the jockey.log: 2012-10-11 20:31:24,103 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,119 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,119 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,322 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,323 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-11 20:31:24,450 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,450 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,465 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,465 DEBUG: fglrx_updates is not the alternative in use

    Read the article

  • X doesn't find nvidia module when installing developer driver

    - by Nils
    I just downloaded the developer driver from Nvidia's CUDA Zone. Executed it and typed in restart gdm and the it worked. However after rebooting X didn't come up (xorg log), to fix it I can simply rerun the installer and the restart gdm again. What I don't understand is where it breaks and why X11 doesn't find the module?! I removed all (I think..) of the Nvidia packages which can with Ubuntu 10.10. I've also googled a bit and found some HOWTOs about manually installing the Nvidia driver. However all of them were for an earlier version of Ubuntu. Please do not respond telling me I should use the proprietary Nvidia driver supplied by Ubuntu, because I need the development drivers.

    Read the article

  • You do not appear to be using the NVIDIA X driver

    - by Vishal shekhar
    my laptop has nvidia GT540m yesterday i install nvidia-current after updating fromsudo apt-add-repository ppa:ubuntu-x-swat/x-updates then i write sudo nvidia-xconfig and then reboot my desktop visual effect changes and it look good like nvidia is working but still glx i not working and nvidia-setting tells me that You do not appear to be using the NVIDIA X driver my dkms status is nvidia-current, 304.43, 3.2.0-30-generic-pae, i686: installed lspci |grep VGA output : 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) also i can not login to my admin account but when i login to standard user or guest it works but still NVIDIA X driver is not working can any one suggest something so that NVIDIA X Driver start working as i seen many forum but none worked for me earlier i tried nvidia-173 ,nvidia-current(before x-swat/updates reprository) but none works for me

    Read the article

  • Fixing Mobility Radeon HD3650 driver in 12.04 LTS

    - by Kevin
    Okay, I know the subject has been discussed many times, but i dont find any of the instructions working. Most promising guide was here https://launchpad.net/~makson96/+archive/fglrx ive also tried https://help.ubuntu.com/community/BinaryDriverHowto/ATI because since the driver installation was written on other sites as well, this page included a "patch" file, but since im unaware how to patch installations, im out of luck. If i understand correctly, the patch should fix the driver and eliminate constant error messages. My system is 64bit 12.04 LTS and card is Mobility Radeon HD3650. Usual installation of the driver results in weird display resoulution (1100x something, while it should be 1440x900) and even 3d games did not work. Can anyone give me any more pointers? Much appreciated!

    Read the article

  • nouveu driver logs into unity-2d by default

    - by Ubuntuser
    I have an old system with NVIDIA Corporation NV25 [GeForce4 Ti 4600]. When running Ubuntu , the nouveau driver loads fine but does not log into Unity with compiz. Instead it logs into Unity-2D. Any idea how to enable 3D/ compiz with the nouveau driver. OS: Ubuntu 12.04 Beta2 The nvidia driver is no more available for this graphics card, so have to rely on nouveau. UPDATE: Bug reported on launchpad . See here. There has been no reply as yet to this bug-report - does anyone have any idea how to resolve this? Further information, Also, if I use kubuntu desktop, kwin graphics works just fine. But, the users prefer Unity over KDE so I have uninstalled Kubuntu.

    Read the article

  • Need a non-X terminal for the nvidia driver installation

    - by broiyan
    When I try to install the nvidia driver for my video card, I receive an error message. ERROR: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at www.nvidia.com. I wasn't able to find the README on the website but how do I create a terminal that is non-X? I am on 12.04.

    Read the article

  • atheros wireless ar9285 driver

    - by nikola
    I have been having problems with wireless on Ubuntu 10 and above, Mint 11 and above. The problem is in the driver for the wireless... I can see that there is no driver installed and yet it works but reduced a lot, for example: on windows 7 ultimate 100% on distance of 1 meter (currently running) Mint Cinnamon 15 on same distance 70% when it goes under the 40 % it simply disconnects and than takes a lot of time to connect again I am new to Linux and I don't know anything about programming, yet I love the interface and look of the OS but don't want to reject it for couple of problems. There is, however, a problem with brightness control on laptop, it shows the notification and slider but with no effect The question is: Can somebody explain to me where to download and how to install the ar9285 driver for atheros wireless card laptop acer emachines eme529? or can someone explain this to me only for the LINUX MINT 15 http://www.jrhenkelmann.net/index.php?option=com_content&task=view&id=34 because the synaptic's interface is different than of mint 15 I KNOW this is Ubuntu community but the problems persist in all Linux versions

    Read the article

  • Ubuntu 12.04 LTS - Black Screen at boot After changing Nvidia Driver

    - by nDman
    2 days ego i updated my Ubuntu 12.04 LTS to latest updates but i ignored Grub Updating because I thought it will clear my grub settings (I'm so noob!). After restart every things was right, the Ubuntu started normally and every things was working well except graphic which had problem before update. I had the experimental driver before but I changed it to the current-update version. After restart Ubuntu stock on black screen. I tried to reinstall Nvidia driver from recovery but it not worked. Then i used Update Grub in recovery, it not worked too but i see this line on screen at boot: at this time it stops and keyboard not working, but when I push the power button it shows these lines and it will shutdown. OK finally I made it start with older kernel (3.5.0-28-generic). Now how can I keep this kernel or fix Ubuntu to work with new kernel? Should I reinstall Nvidia driver? Which version should I use?

    Read the article

  • Get and install Nvidia GeForce 8400 GS driver

    - by williepabon
    Recently, I changed my OS kernel from 10.04 to 11.10 (bugs), but after doing it, the video driver for the 8400 GS disappeared (was there in 10.04). I worked out the same procedure I did to install it in 10.04, mainly, sudo apt-get --purge remove nvidia-current sudo apt-get --purge autoremove sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get -y install nvidia-current but it didn't work even though the commands seemed to install the driver without problems. Right now my machine is working with the standard drivers, as shown. williepabon@WP-WrkStation:~$ sudo lshw -C display [sudo] password for williepabon: *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:05:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:de000000-deffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:cc80(size=128) memory:dfc00000-dfc7ffff Any suggestions to correct the problem? Thanks

    Read the article

  • NVIDIA driver problem after updating to 12.04

    - by patlan
    As the title says I have problems with the driver after updating to 12.04. The GUI doesnt start anymore, I only see the terminal. I have googled this for a couple of days now and have tried different things like running commands for update, upgrade and tried to uninstall and re-install the NVIDIA-drivers but with no success. No matter what I do I get this message: "Error: API mismatch: the NVIDIA kernel module has version 295.40, but this NVIDIA driver component has version 295.49. Please make sure that the kernel and all NVIDIA driver components has the same version." Is there anyway I can fix this from the terminal?

    Read the article

  • How to install a NVIDIA driver for 11.10

    - by Hurumhei
    I have a Thinkpad T61p with Quadro FX570M. I just installed the Ubuntu 11.10. I have tried to download the driver LINUX DISPLAY DRIVER - X86 version 295.20 from NVIDIA, but I do not manage to install it. If I open System Screens, there is an unknovn screen driver. My installation works fine except, fails on resume with a black and white pattern all over the screen and I have difficulties detecting an external monitor. Please, if you have any clue - help me out.

    Read the article

  • windows 7 file and printer sharing doesnt work for me

    - by EmRa228
    a few days ago, i havent any problem but now I cant use file and printer sharing on the windows 7 but everyone on the network can. maybe I install some program that make this change or disable a windows services! (Like: proxifier, ...) Now: -I can ping everyone on the network. -everyone can ping me. -I cant see their computers in windows 7 "Networks" So, I cant use file and printer sharing. -everyone can see my computer in windows 7 "Networks" and also can use my file and printer sharing. -with a LAN messenger program, we(I & everyone) can text chat, video chat and transfer file. . . I want see another computer on the network and use windows 7 file and printer sharing!!!

    Read the article

  • Printer options follow Office documents

    - by tkalve
    One person (John) creates an Office document, and prints this document to his HP printer which is using HP Universal Printing PS (v4.7) driver. He has got Job Storage (Personal job) enabled for this printer, with custom username and a personal PIN. He later sends this document in an e-mail to his colleagues. Another person (Anne) opens the document, and tries to print the document to her HP printer (also using HP Universal Printing driver), but is not able to fetch it on the printer. The Job Storage options from Johns computer follows the Office Excel document, so Anne has to change this manually to her username and her PIN before she can print. What on earth is causing this, and how do we fix it?

    Read the article

  • How to install the Printer

    - by Maroof
    While I was installing the printer via the network , the Network Setting is deleted from the printer. Now I don't know how to reset the printer or how to bring back the network seting.

    Read the article

  • Allow access to printer between interfaces on Cisco ASA5510

    - by Jonas Stensved
    I have a Cisco ASA5510 where we have to separate networks on two separate interfaces. The networks have and should have nothing to do with each other except that network B needs to access a printer on network A. Network A: 192.168.137.0/24 Printer: 192.168.137.20 Network B: 192.168.0.0/24 I've added an incoming rule from Network A to the Printer IP in the ASDM interface but clients can't print. Our previous router was configured to let traffic through so the clients on Network B is already configured so it think it should work if the traffic is allowed. How do I let clients on Network B communicate with the printer?

    Read the article

  • CentOS, CUPS - printer managment

    - by HTF
    I'm using CentOS 6.3, and trying to get a printer PIXMA iP4950 to work. The printer is attached via USB. I've downloaded and installed the drivers from the Cannon website, and have the printer installed in CUPS. However, when I print anything (even the test page), the job is completed successfully (according to CUPS-log), but the printer does not print a thing. I don't know how to debug this. Have tried to change logging to debug, but I don't see any errors in the error_log and the access_log says: Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Canon_iP4900_series) from localhost Please note that I was able to print on another CentOS machine however with GNOME Desktop.

    Read the article

  • How to define a Crystal Report to Windows Default-Printer with a certain papertray

    - by Ice
    I got the job to design some reports with crystal reports XI for a user-group of nearby 20 peoples. Each user has his own printer on his desk. These printers are attached to the network and are served by a print server. The users have thin-clients and are served by citrix with desktops and so has each user his own windows default printer defined. All printers are from the same type and have some papertrays. the reports in question have to go on paper-tray number 3. I have one *.rpt File and so there is one possibility to define a printer and a paper-tray, but how do i define the windows 'default' printer?

    Read the article

  • How to prevent slow printer performance when AD is not available

    - by AKoran
    When I take a domain based computer (Windows XP) and plug it into a network that doesn't have access to the AD, the first time I select a local printer (printing directly to printer) on the current network it takes a good 20-30 seconds before I can select the printer. Doing a little investigating using wireshark I can see the computer is trying to hit AD for some reason and it just keeps timing out. I also tried the same experiment with just a plain workgroup computer and it was able to bring the printer up immediately. Does anyone know how to prevent the machine from trying to contact AD?

    Read the article

  • Asus RT-N66U forgets USB-Printer

    - by heysamhey
    about a week ago I bought the new Asus RT-N66U as the new Router in our little company. There are about 5 clients and 2 printers. There's a USB-only printer as well, therefor we bougth a router with USB-printer sharing. The setup and everything works smooth, but then after one day, and I still haven't found out why, suddenly the printer dosen't show up in the list of connected devices in the routers webinterface anymore. Of course I loose the possibility of printig, even though the printer shows up as "online" in the system settings. Can anybody guess the reason for this problem? Thank you very much

    Read the article

  • small Windows network w/ printer issue

    - by user33666
    printer 1 connected to the desktop printer 2 connected to the same desktop that desktop is connected via Cat 5 to a wireless router a notebook is connected to that same router via WiFi The desktop Control Panel has just been reconfigured to share printers. (I assume this means that the desktop will now allow a notebook coming through the router to be able to access the two printers that are presently hooked up via the desktop--am I correct? Is that what it means?) The desktop can still print to either printer. It is presently okay. This notebook/printer relationship is a new configuration. The notebook, however, can't print at all (yet it can access the internet just fine). Any suggestions for it to be able to access the printers and be able to print via the desktop via the router? Thank you for any assistance.

    Read the article

  • Intercept and ignore keyboard event in Windows 7 32bit

    - by Sg2010
    Hi all, My hardware has a problem, from time to time it's sending a "keydown" followed by a "keyup" of event: keydown: None LButton, OemClear 255 keyup: None LButton, OemClear 255 keydown: None LButton, OemClear 255 keyup: None LButton, OemClear 255 It goes like this forever, in Windows. In general it doesn't affect most of the applications, because this key is not printable. I think it's a special function key, like a media key or something. It doesn't do anything. But, in some applications that LISTEN to keydown and keyup, I get undesire and unexpected behaviour. Is there a way to intercept these 2 events in Windows (for all applications, for Windows itself) and make the OS ignore them? This is really important to me, if you can think of any solution, I'd be forever thankful.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >