Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 22/285 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • My Notebook can't reboot after reinstall new operating systems without display driver installed?

    - by RawR Crew
    I have a small problem when I reinstalled my notebook with Windows 7 or Windows XP home edition. the problem is I can't reboot my system if I didn't install display driver (ATI-Radeon). I can't reboot my system because of the restart's button on shut down menu disappear, thats mean the system cant be rebooting. And when I install display driver, the reboot button in shutdown menu will be appear, thats mean I cant access reboot menu. I just want to know, Why does it happen? Does the display driver have influence with the reboot process?

    Read the article

  • Set up printing with a networked LPR printer?

    - by Ben
    I'm trying to set up printing to a networked LPR printer, but I can't seem to make it work. The connexion information that IT gives is: Print Spooler: printing.domain.edu Printer Name: PrinterName Print port: 515 Bidirectional: Disabled It's an HP LaserJet p4015x, and I'm using the "HP LaserJet p4015x, hpcups 3.10.6 (color, 2-sided printing)" driver, according to CUPS. I have tried installing via the CUPS admin interface as lpd://printing.domain.edu:515/PrinterName, lpd://printing.domain.edu/PrinterName, and http://printing.domain.edu:515/PrinterName, and none of these has worked (i.e. test pages show up as "stopped").

    Read the article

  • HP Deskjet 720C USB printer doesn't finish

    - by 213441265152351
    I have an HP Deskjet 720C connected through a USB cable to an Ubuntu 12.04 laptop. When I plugged the printer for the first time into the fresh 12.04 laptop install, it auto-detected the printer correctly and choose the recommended drivers without a problem. The document print fine until they reach the end of the last page, then suddenly stop just about the end leaving the page unfinished. I have checked that the margins are the correct ones. I have the latest version of cups installed. I have also tried changing the options of usb-unidir-default and usb-no-reattach-default via lpadmin, but the printing stops even earlier. EDIT: It seems like the problem is with the last page. So if I am printing 3 pages, the first two work well but the last few lines in the last page are not printed. Any ideas?

    Read the article

  • Authentication issue with CUPS 5.3.1 on SMB Printer

    - by Julius
    I am trying to print to a samba printer via CUPS. I have configured the printer allright, but there seems to be a problem with authentication. The error message I get is Session setup failed: NT_STATUS_LOGON_FAILURE The GUI also tells me: Idle - Tree connect failed (NT_STATUS_ACCESS_DENIED) It used to work with previous versions of CUPS (1.4.3 and 1.4.6) under Ubuntu 11.04 I am doing this on a clean install of Ubuntu 12.04, CUPS version 1.5.3. I have tried changing some rights relating to apparmor, with no success as described here: http://www.compdigitec.com/labs/2010/01/16/fixing-usrlibcupsbackendsmb-failed-error-in-ubuntu/ I have been working with Ubuntu for years - but this is the kind of problem I need help with.

    Read the article

  • CUPS: HP printer DNS url

    - by wintersolutions
    The URL for my printer generated by hp-makeuri looks like this: hp:/net/Officejet_6500_E710n-z?ip=192.168.178.30 But the printer is on a dhcp enabled wifi network and so its IP-address does and could change. On the other hand my wifi router seems smart enough to have some sort of DNS: $ ping hp-6500a PING hp-6500a.fritz.box (192.168.178.30) 56(84) bytes of data. 64 bytes from hp-6500a.fritz.box (192.168.178.30): icmp_req=1 ttl=255 time=11.3 ms I tried to use the hostname in the CUPS URL/DeviceUID but it failed, any suggestions if this is possible and the correct format?

    Read the article

  • Improve Your Photo Prints By Properly Preparing Your Printer

    - by Eric Z Goodnight
    Whether your photo printer is new or has been collecting dust between the holidays, you’ve likely spent a few frustrating moments setting up the machine. But did you know proper setup can improve the quality of your prints? Spend a few moments looking over the basics, and see why it can be a good idea to keep your drivers updated, learn about some basic printer maintenance, and see some advanced options for setting up great prints. Keep reading Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation Winter Theme for Windows 7 from Microsoft Score Free In-Flight Wi-Fi Courtesy of Google Chrome

    Read the article

  • Installling a brother printer in Ubuntu 12.04 (MFCJ6510DW)

    - by Gelterfinger
    I am trying to install a Brother MfCJ6510DW printer on Ubuntu 12.04. I have tried various ways, but nothing woks for me. I have downloaded the drivers from the solutions brother.com I tried to install from the "System setting- printing" on the pull-down menu. There I get the message "failed to read PPL file - it says something about a missing Asterisk in colum1 Line 1 In the terminal I get the message cannot find file or directory. Under localhost:631/printer, I get the message " no such file or directory" I tried to install the file I downloaded from the Brothers Solution Center on the Ubuntu Software Centre, there I get the message " The package is of bad quality" Help I downloaded Mfcj6510dwlpr-3.0.0-1.i386.deb and mfcj6510dwcupswrapper-3.0.0-1.i386 I also downloaded linux-bprinter-installer-1.0.0-1.gz, but this does not help either.

    Read the article

  • Trouble using Canon MG 2440 printer in UBUNTU 14

    - by user264795
    I connected usb serial cable from printer to computer. The drivers has been installed automatically. I printed the test page - it was printed. I tryed to print an image - it stays with status - processing... and dont work. Test page also cant be printed. What a problem? I dont know exactly, but I think I use "CUPS" manager and drivers... now status Waiting for printer to become available. And do not print.

    Read the article

  • USB printer doesn't finish in 12.04

    - by 213441265152351
    I have an HP Deskjet 720C connected through a USB cable to an Ubuntu 12.04 laptop. When I plugged the printer for the first time into the fresh 12.04 laptop install, it auto-detected the printer correctly and choose the recommended drivers without a problem. The document print fine until they reach the end of the page, then suddenly stop just about the end leaving the page unfinished. I have checked that the margins are the correct ones. I have the latest version of cups installed. I have also tried changing the options of usb-unidir-default and usb-no-reattach-default via lpadmin, but the printing stops even earlier. Any ideas?

    Read the article

  • Sony Ericsson Windows driver problem

    - by alex
    I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

    Read the article

  • SATA Driver for Acer Aspire One D257

    - by Robert Niestroj
    i have a Acer Aspire One D257. In this netbook the hard disk is defect so i bought a new one. Now i want to reinstall Windows 7. Im using an external DVD Drive plugged into USB. The Windows 7 DVD is staring, Win7 setup is starting and when it comes to Hard Drive options it says that no drive was detected and i should try search for drivers. It shows me this window: Screenshot from web Now i cant find the right drivers for this netbook to continue with the installation. The laptop has the newest BIOS - 1.15, it is reset to factory default settings except that i enabled the Boot Menu prompt with F12. From the Acer Support Website i've downloaded the SATA AHCI Driver and the Chipset Driver. I unpacked both to a USB flashdrive in seperate folders. When i select the SATA AHCI Driver it does not find any drivers. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it shows one driver: Acer HWID (path_to\1.inf). When i continue with this driver i got an error message that says something like: No new devices found. Check if the driver files are on the installation disk. When i show him the Chipset Driver it sees a lot more driver. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it show some drivers: Intel N10 Family DMI Bridge Intel N10/ICH7 Family PCI Express Root Port Intel N10/ICH7 SMBUS Controller Intel N10/ICH7 Family USB Universal Host Controller Intel N10/ICH7 Family USB2 Enhanced Host Controller Intel N10/ICH7 Family Interface LPC Controller When i uncheck this checkbox i get a lot more drivers, and some SATA Drivers but the also do not work. I get the same error message as before. Can someone help me find a driver that should work or am i doing anything else wrong?

    Read the article

  • Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

    - by Emerson
    I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

    Read the article

  • Known USB 2.0 devices don't install driver, but must be manually forced

    - by Darragh
    When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

    Read the article

  • windows 2008 R2 TS printer security - can't take owership

    - by Ian
    I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

    Read the article

  • How do I send a PDF in a MemoryStream to the printer in .Net?

    - by Ryan ONeill
    I have a PDF created in memory using iTextSharp and contained in a MemoryStream. I now need to translate that MemoryStream PDF into something the printer understands. I've used Report Server in the past to render the pages to the printer format but I cant use it for this project. Is there a native .Net way of doing this? For example, GhostScript would be OK if it was a .Net assembly but I don't want to bundle any non .Net stuff along with my installer. The PrintDocument class in .Net is great for sending content to the printer but I still need to translate it from a PDF stream into GDI at the page level. Any good hints? Thanks in advance Ryan

    Read the article

  • Can I send a ESC d command to a POS printer from perl?

    - by Bradleyb
    I have a Star TSP100 printer and I'm having few problems with it really. My problem is that I'm not as familiar with programming as I should be - but I'm learning! The programmers reference for the Star printer says that if I send a ESC d to the printer - that will activate the built-in cutter - which I would like to do very much. My problem is that I have no idea how to send an escape code like that from within PERL - if it's even possible. I really appreciate any advice on this one.

    Read the article

  • Where is a reputable place to buy ink refills for my color laser printer?

    - by FooBook
    I was looking around for a place to buy a refill kit for my laser printer. Of course, there are thousands of websites that are selling these kits. The problem is that I can't tell which one is a good one to buy from. How can I tell if the store has a good reputation. I don't want to pay, and then not receive the item. This has happened to me before (IvySkin). Or get conned some other way. One place I found is printerinkcartridge.us. But again, I can't find any independent information from people that they have successfully ordered products from there, and that they received what they expected. Are there any reliable sites you can suggest where I may order a kit from? Is the one I found good enough? Thanks guys.

    Read the article

  • Giving a scanner-printer-combo a zoom function when copying ?

    - by ldigas
    You know how everytime you go to a photocopying shop, photocopiers always have a neat zoom function (it can take whatever you give it, and zoom it in/out, so your copy comes out smaller or larger). I got one of those neat 3-in-one printer machines. It has a copy button on it, but it also has some software that comes with it (Epson SX115 to be exact is the model). Apart from going into some photo manipulation application, is there some way (software) to give it that feature. So, in short, I need something that can scan a page, scale it to let's say, a quarter of its size, and then print it out ? Anyone knows of anything like that ?

    Read the article

  • How to track usage of a HP Network Printer?

    - by NinethSense
    I have a HP Printer (HP Color LaserJet CM1312 MFP Series PCL 6) installed which is used by nearly 200 PCs through LAN. I want to track the usage like: Who (IP Address) initiated the print task Time Status: Success or Failure How many Pages Color or Gray Scale etc. I checked the manuals and nothing about this requirement is available. The built-in control panel log displays only last 10 activities. Is there a way to track these information? Is there an API avaialble so that I can make an application myself?

    Read the article

  • Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

    - by Jim Dagg
    I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

    Read the article

  • Linux Device Driver - what's wrong with my device_read()?

    - by Rob
    My device /dev/my_inc is meant to take a positive integer N represented as an ascii string, and store it. Any read from /dev/my_inc will produce the ascii string representation of N + 1. The problem is that when I cat /dev/my_inc, I only get the first byte of myinc_value output to my shell, even though I have bytes_read == 2 at the end of my loop. /* Read from the device *********************/ static ssize_t device_read(struct file *filp, char *buffer, size_t length, loff_t *offset) { char c; int bytes_read = 0; int value = myinc_value + 1; printk(KERN_INFO "my_inc device_read() called with value %d and msg %s.\n", value, msg); /* No bytes read if pointer to 0 */ if (*msg_ptr == 0) return 0; /* Put the incremented value in msg */ snprintf(msg, MAX_LENGTH, "%d", value); /* Put bytes from msg into user space buffer */ while (length && *msg_ptr) { c = *(msg_ptr++); printk(KERN_INFO "%s device_read() read %c.", DEV_NAME, c); if(put_user(c, buffer++)) return -EFAULT; length--; bytes_read++; } printk("my_inc device_read() returning %d.\n", bytes_read); /* Return bytes copied */ return bytes_read; }

    Read the article

  • Using an ODBC application with a JDBC driver

    - by Nick Retallack
    My company uses Vertica. We have Python applications that connect to it with pyodbc. I do most of my development on a Mac (Snow Leopard) and unfortunately Vertica has not released ODBC drivers for Mac. They do have JDBC drivers though. I don't think developing in Jython is a good compromise. Is there any way to use JDBC drivers with an ODBC application? Some kind of ODBC connector?

    Read the article

  • Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

    - by Weston C
    I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

    Read the article

  • X server with nvidia driver crashing: 12.04

    - by Raster
    My X server consistently crashes. It seems like this is happening when the X server is idle. This behaviour is new with 12.04. This is only happening on the second display of a multiseat system. Is there a configuration change I can make to stop this? X.Org X Server 1.11.3 Release Date: 2011-12-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu Current Operating System: Linux Desktop 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-29-generic root=/dev/mapper/Group1-Root ro ramdisk_size=512000 quiet splash vt.handoff=7 Build Date: 04 August 2012 01:51:23AM xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 2 22:37:06 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fcee86be846] 1: /usr/bin/X (0x7fcee8536000+0x18c6ea) [0x7fcee86c26ea] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fcee785c000+0xfcb0) [0x7fcee786bcb0] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x902a9) [0x7fcee154a2a9] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0xfd5e7) [0x7fcee15b75e7] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d6b92) [0x7fcee1990b92] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d74d5) [0x7fcee19914d5] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d767d) [0x7fcee199167d] 8: /usr/bin/X (0x7fcee8536000+0x1196ec) [0x7fcee864f6ec] 9: /usr/bin/X (0x7fcee8536000+0xe8ad5) [0x7fcee861ead5] 10: /usr/bin/X (0x7fcee8536000+0xe9d45) [0x7fcee861fd45] /etc/X11/xorg.conf Section "ServerLayout" Identifier "Desktop" Screen 0 "DesktopScreen" 0 0 InputDevice "DesktopMouse" "CorePointer" InputDevice "DesktopKeyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "ServerLayout" Identifier "Desktop2" Screen 1 "Desktop2Screen" 0 0 InputDevice "Desktop2Mouse" "CorePointer" InputDevice "Desktop2Keyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "Files" EndSection Section "ServerFlags" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false" Option "AllowMouseOpenFail" "on" Option "AllowEmptyInput" "on" Option "ZapWarning" "on" Option "HandleSepcialKeys" "off" # Zapping on Option "DRI2" "on" Option "Xinerama" "0" EndSection # Desktop Mouse Section "InputDevice" Identifier "DesktopMouse" Driver "evdev" Option "Device" "/dev/input/event3" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection # Desktop2 Mouse Section "InputDevice" Identifier "Desktop2Mouse" Driver "evdev" Option "Device" "/dev/input/event5" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "DesktopKeyboard" Driver "evdev" Option "Device" "/dev/input/event4" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "InputDevice" Identifier "Desktop2Keyboard" Driver "evdev" Option "Device" "/dev/input/event6" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "Monitor" Identifier "Desktop2Monitor" VendorName "Acer" ModelName "Acer G235H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "DesktopMonitor" VendorName "Acer" ModelName "Acer H213H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "EVGACard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" Option "Coolbits" "1" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "XFXCard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 9800" Option "Coolbits" "1" BusID "PCI:5:0:0" Screen 0 EndSection Section "Screen" Identifier "DesktopScreen" Device "EVGACard" Monitor "DesktopMonitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Desktop2Screen" Device "XFXCard" Monitor "Desktop2Monitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >