Search Results

Search found 1584 results on 64 pages for 'punch cards'.

Page 24/64 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• management network to a network port for additional ones munin and monit

  - by paolo

  management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

  Read the article

• Distortion problem with Creative audio equalizer

  - by e-t172

  Hi, I have a problem with the Creative Console EQ, I don't know if it's fixable or not (is the EQ software or hardware on these cards?). Basically, I have enormous distortion with certain sounds in the 30 - 125 hz range. When this happens I get some sort of "frrzzzz" (sorry, I'm french and don't really know the correct english word for that) on top of the original sound. I have a Sound Blaster Audigy SE. I'm using the Daniel_K drivers, on Windows 7 Profesionnal x64. All the effects are disabled except EQ. Steps to reproduce Put the card in 24bit/96khz mode. The problem is also present with 16bit/48khz but seems to be less audible. In the Creative Console, use the following EQ: (full size) Play this sound at a reasonably high volume. You should hear distortion on the two "booms". Especially the second one. Disable Creative EQ. Play the sound in an application with an integrated EQ (e.g. foobar2000, ffdshow) using the same EQ parameters. There is no distortion. Conclusion: the Creative EQ is broken. Is anyone having the same problem? I'm also interested in the results with other Creative cards or even other brands soundcards with a similar EQ feature.

  Read the article

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• Wireless keeps shutting off in Windows 7

  - by Nathan Adams

  I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• How long will a "safely stored" Solid-State-Drive (SSD) keep its data? (e.g. bank safety-deposit box)

  - by user31575

  Here's my usecase: once-and-only-once copy off photos/videos to an internal SATA Solid State Drive (SSD) put this drive in a well-ventilated, air-conditioned bank "safety deposit box" for safe keeping The question: How long can I safely store a solid-state-drive in such an environment? i.e. 0% bitrot, 100% success when "plugged in" Are some SSD drives more reliable than other for this usecase? (e.g. smaller size vs larger size, SLC vs MLC, different brands, etc) More fodder: I have read that solid state memory cards (e..g compactflash, or sd cards) have much longer durability than other media (DVD's, CD's, hard drives) for this usecase (guaranteed against bitrot/other dysfunction on the order of ~ a decades vs a year ). I don't know if this applies to "SSD hard drives". Copying to one 500Gb ssd vs 8 64gb flash drives is easier SSD SATA hard drives have no moving parts, but they have more "visible electronics" than a compact flash card. I don't know if this "visible electronics" can fail, i.e. in contr I know many will point to carbonite, other cloud backup stuff, but I like the simplicity of having physical copies and wanted to understand the risks/implications thanks,

  Read the article

• Can't access server sound card when vnc'd into ubuntu server

  - by Corey Kennedy

  I've set up my ubunutu 10 server with xfce, nxserver, and now tightvncserver so that I can control it remotely from my Windows 7 laptop. NX is working fine for remote access, but when I run (for example) exaile, no sound will be sent through the server's sound card. I installed tightvncserver and connected, but ran into the same problem. Exaile opens, sound isn't muted, I can see that sound cards are installed (via cat /proc/asound/cards), but I can't seem to get the remote sessions to access the server's sound card. Also, just to confirm that the sound card was working I hooked up a montior/keyboard to the server and opened a local xfce session. That worked fine. While I had the local session running, I was also able to open a remote session with NXClient and start exaile - which then successfully piped sound to the local card. After disconnecting the monitor/keyboard and moving the box back to its normal spot, though, I was not able to play sound via either an NX or VNC session. Does anyone have any suggestions? Surely it's possible to configure my remote sessions to pipe sound to the server's sound card, right? Or at least get xfce up and running without a monitor or keyboard but with access to the sound card so I can VNC into it? Thanks!

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• CodePlex Daily Summary for Friday, June 07, 2013

  CodePlex Daily Summary for Friday, June 07, 2013Popular ReleasesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...New ProjectsAccountingTest: just to learn asp.net mvc 3 Agile Poker Cards for Windows Mobile: During a scrum or other agile processes, you have to estimate the size of a user story during a planning session. With the Agile Poker Cards program there is no need for using real cards anymore!Buildinator: Buildinator generates TFS Build definitions from an XML file, enabling canonical "templates" that make it easy to add or copy build definitions.Clipboard Capture Plugin: Captures an image in the clipboard and gives you more options to insert the image into Live WriterComercial HS: Commercial hsCommonExtranet: CommonExtranet is a basis for an Extranet web site with a user authentication mechanism that incorporates password aging and various features expected on a domain LogOnDataVeryLite: DataVeryLite is a lightweight *Persistence Framework*. DataVeryLite???????*?????*. ??????Nhibernate?????,??Linq to sql???????,?????DataVeryLite.daydayup: snd\realdamon_cpDNN Extension Url Providers: The DNN Extension Url Providers project contains installable extensions for extending DNN URL functionality.DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.Football Team Management: Manage team, player, match and staffFreePiano: Play piano using your computer keyboard.GIF animator: Dev in progessI'm Feeling Lucky Plugin: Lets you put a link in that acts as though doing an I'm Feeling Lucky search.Insert Video Jnr: This is a baby version of my Video plugin, it is intended for Hosted Wordpress blogs only and shouldn't be used with other blog providers.jabbrmercurial: 22Kax.WebControls.RadioButtonList: Web Custom Control that extend RadioButtonList to allow uncheckable state.Kinect Screen Aware: Kinect Screen Aware uses a Kinect to detect touch, hover, gestures, and voice on a standard television display. It's designed to be low cost and easy to setuplppbop: Aplikasi Laporan Bantuan Operasional PendidikanmobiSms: mobismsnga: National Geography of AzerothRadminPassword: ????????? ??? ??????????????? ????? ??????? ? ????????? ????????? ?????????? ?????????? ?? Radmin. A program to automatically enter the passwords in the famous PC remote control software Radmin.Rx Heat: Rx Heat is a library of helper classes that complements the Reactive Extensions Library with additional features. Schema Generator: The basic idea behind this utility is to emit the database schema from an existing SQL Server database. From a developer perspective, it is sometimes very much handy to quickly take a printout of the database structure for creating the UI layout.SharePoint Packager: Perform the instalation, upgrade and retraction of Ms Sharepoint Applications fast, easy and efficientsmartTouch: :-)SpotifyLync: A small tray application that reports your Spotify status to your Microsoft Lync client. Alos contains additional Spotify / Lync features.Syngine: A simple to use game framework using MonoGame and Farseer Physicstest060601CM: testtestMC053003: testToSic.Eav: A powerfull EAV (Entity-Attribute-Value) system created by 2sic Internet Solutions in Switzerland. It's currently mainly used inside 2SexyContent for DotNetNukeTraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>trakr: minimalist webtracking software written in python and twistedTwitterXML: A .NET wrapper library for the Twitter REST API. Currently, all of the methods return an XMLDocument. Also included are classes for Users, Statuses, and Direct Messages that use XML serialization for converting the XML responses to objects with a Deserialize() call.Universal Parking Centre: Universal Parking Centre is a website-based software developed by Center Code to help you in organizing your parking business.Velocity OS: Be fast, Be strong. It's Velocity.WinKeGen Code Samples: This project will allow beginning developers a close look at some code samples and variations of how to use those samples in their own code.WinRT Synth lib: Project Description this project aims to provide an easy-to-use API, for sound synthesis under winrt, in c#. It use the XAudio2 api for the playback of the sounWpfCollaborative3D: WpfCollaborative3DX-Parking: Our online parking sites , try at : x-parking.pemrogramaninternet.infoYnote Plugins: Ynote Classic Plugins which help in transforming Ynote Classic into a powerful HTML / XML Editor or an IDE.

  Read the article

• Longitudinal Redundancy Check fails

  - by PaulH

  I have an application that decodes data from a magnetic stripe reader. But, I'm having difficulty getting my calculated LRC check byte to match the one on the cards. If I were to grab 3 cards each with 3 tracks, I would guess the algorithm below would work on 4 of the 9 tracks in those cards. The algorithm I'm using looks like this (C#): private static char GetLRC(string s, int start, int end) { int result = 0; for (int i = start; i <= end; i++) { result ^= Convert.ToByte(s[i]); } return Convert.ToChar(result); } This is an example of track 3 data that fails the check. On this card, track 2 matched, but track 1 also failed. 0 1 2 3 4 5 6 7 8 9 A B C D E F 00 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 10 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 20 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 30 8 8 8 9 9 9 9 9 9 9 9 9 9 0 0 0 40 0 0 0 0 0 0 0 1 2 3 4 1 1 1 1 1 50 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 60 3 3 3 3 3 3 3 3 The sector delimiter is ';' and it ends with a '?'. The LRC byte from this track is 0x30. Unfortunately, the algorithm above computes an LRC of 0x00 per the following calculation (apologies for its length. I want to be thorough): 00 ^ 3b = 3b ';' 3b ^ 33 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 31 = 39 39 ^ 32 = 0b 0b ^ 33 = 38 38 ^ 34 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 3f = 00 '?' If anybody can point out how to fix my algorithm, I would appreciate it. Thanks, PaulH

  Read the article

• WEP key not working on laptop running Ubuntu

  - by stupid-idiot

  I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

  Read the article

• Is there a way to bridge two outgoing TCP connections in order to bypass firewalls and NAT?

  - by TK Kocheran

  We're all familiar with the problem of port-forwarding and NAT: if you want to expose something to accepting an incoming connection, you need to configure port-forwarding on the router or conjure up some other black magickery to "punch holes" in the firewall using UDP or something. I'm fairly new to the whole "hole-punching" concept so could someone explain how it works? Essentially, I'd like to understand how hole-punching would work and the theory behind it, as well as if two TCP connections could be bridged via a third party. Since there's no issue with outgoing TCP connections since it's handled with NAT, could a third party bridge the connections so that the two parties are still connected but without the bandwidth cost of traffic going through the third party?

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• Options for remote desktop software for helping remote users?

  - by Nick G

  I need an easy way to jump on someone elses machine to help them solve a problem. It needs to be really easy for them to install (preferably doesn't actually require an "install" but just running an exe?). It must punch through any firewalls automatically using a relay server or P2P (so Remote Desktop itself is no use to me). I've found commercial products like MeetMeNow but they're really expensive. I want something that you can either buy a cheap pack of sessions or minutes, or preferably something free. I'm not in the business of commerical support and would only use it once every couple of months perhaps.

  Read the article

• Identifying a CAT6 cable in a bundle

  - by Jon Tackabury

  We had a contractor wire up our office with all the cables leading back to a central location. The only problem is that he didn't label anything, so we have no idea which cables go to which room. One end of the cable is terminated in a wall-jack (in the rooms), the other end is un-terminated and will be punched to a patch panel. Is there a way to identify the cables without having to terminate them? We'd like to group the cables on the patch panel by room, but I don't want to crimp/punch each cable twice. Thanks!

  Read the article

• Tool to allow Kerberos Authenticated users to modify Firewall settings

  - by Lars Hanke

  I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

  Read the article

• Connecting client to JBoss cluster

  - by Nivek

  I am new to JBoss. Basically I have managed to cluster 2 nodes with: Node 1: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.51.28 -Djboss.messaging.ServerPeerID=1 Node 2: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.50.21 -Djboss.messaging.ServerPeerID=2 I know that if i cofigure a Apache load balancing(Mod_JK) to sit infront of the cluster, the client simply just punch in the IP of the Apache, and Apache will redirect the traffic to the nodes. But I do not want to have a Apache infront of the cluster. So how do my client access the cluster?? Do i need to configure something in JBoss, or isit a MUST to have a load balancer for the client to access the cluster?? MANY thanks in advance....

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >