Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 24/461 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Booting from a USB drive that was originally a boot drive

  - by daveh551

  When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

  Read the article

• usb device in dual mode on gentoo linux

  - by Idlecool

  i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

  Read the article

• SIMD Extensions for the Database Storage Engine

  - by jchang

  For the last 15 years, Intel and AMD have been progressively adding special purpose extensions to their processor architectures. The extensions mostly pertain to vector operations with Single Instruction, Multiple Data (SIMD) concept. The reasoning was that achieving significant performance improvement over each successive generation for the general purpose elements had become extraordinarily difficult. On the other hand, SIMD performance could be significantly improved with special purpose registers...(read more)

  Read the article

• Off-site Cardholder Data Storage

  - by LinuxGnut

  Is there a service or site out there that will store cardholder data for me? I don't need any kind of transaction processing or recurring billing... I just need somewhere that I can store data on until someone in my company is able to look at it. The specific need is allowing customers to input data that will be used for credit checks. Name, Address, Credit Card(s), and the such. Google Checkout, PayPal, NetSuite, and Authorize.net seem to be what everyone suggests to me, but they don't offer what I need -- they're just payment gateways.

  Read the article

• iOS persistant storage with update function

  - by jernej

  im developing a game which has different levels and i need to store all levels and its elements (position, image, sounds,..) into a file/database. The levels will be updated so i need a function that checks online for a update and downloads a database dump and additional files. I was planing to store all the persistent data into a SQLLite database, but not quite sure how to do the update part - to pack the database dump and the files together (in a .zip or with a xml). Can this be done any other way (as secure as possible)? thanks!

  Read the article

• update manager - insufficient storage space (false alarm)

  - by itsols

  I'm trying to run Update Manager but it keeps reporting that there's not enough space. Here's the screenshot: I ran sudo apt-get update && sudo apt-get upgrade from the terminal but still update manager says that there are updates and I cannot seem to get pass this message. I have even removed many programs from my system and there is supposed to be at least 6GB of disk space free. What can I do?

  Read the article

• Adding a new USB port inside a Macbook Pro

  - by MikeC8

  I have a USB Dongle that I'd like to put inside my Macbook Pro. I have already found a spot that will fit the dongle. The next question is splicing one of the USB ports and connecting it to the dongle. Here's a photograph of the inside of my Macbook Pro, showing the USB ports and a little gray plastic divider with four holes in it above each port. http://min.us/mvoQEem My question: Does anyone know what is inside these holes? Presumably each one is a pin for the USB port, right? Can I just stick a wire in there, giving me 4 pins, plus the fifth attached to the metal outside the port? More generally, any one have any ideas for what might be the easiest way to get a USB port inside my MBP? :) Thanks!

  Read the article

• SIMD Extensions for the Database Storage Engine

  - by jchang

  For the last 15 years, Intel and AMD have been progressively adding special purpose extensions to their processor architectures. The extensions mostly pertain to vector operations with Single Instruction, Multiple Data (SIMD) concept. The motivation was that achieving significant performance improvement over each successive generation for the general purpose elements had become extraordinarily difficult. On the other hand, SIMD performance could be significantly improved with special purpose registers...(read more)

  Read the article

• Actual High Speed USB flash drive

  - by CSkau

  I'm looking to upgrade my EEE 1000H by possibly replacing the HDD with simple (internal) usb connected storage. The problem I'm having now is that I can't seem to find any actual high speed usb sticks. They all proclaim high speeds, but usually turn out to be ~30 mb/s - much lower than the 60 mb/s (480 mbit/s / 8 ) I understand USB 2.0 is at - no ? Can anyone enlighten me as to why no USB sticks seem to go past that low bar or alternatively point me in the direction of some actual high speed usb sticks ? Any help is greatly appreciated :) Cheers!

  Read the article

• USB keyboard not recognized by motherboard with only a legacy PS/2 header

  - by Luis

  I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

  Read the article

• Syncing Large Directories/Filesystems using USB Drive [closed]

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

• USB hardwares driver installation

  - by unknown (google)

  I am using few USB hardwares like camera and scanners with my software application. I plugged my hardware in USB A installed the drivers and the device was working properly. Now I tried to connect the same hardware in USB B (ie, some other USB port), and again it is asking for the driver installation. I need to know the reason behind this. Is it something to do with the particular device or system? Anywork around for this during the first time driver installation? Please anyone explain me how the USB works physical address, how it is assigned and how the driver for a device getting installed. Thanks in advance.

  Read the article

• Syncing Large Directories/Filesystems using USB Drive

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

• Windows Phone 7 development: Using isolated storage

  - by DigiMortal

  In my previous posting about Windows Phone 7 development I showed how to use WebBrowser control in Windows Phone 7. In this posting I make some other improvements to my blog reader application and I will show you how to use isolated storage to store information to phone. Why isolated storage? Isolated storage is place where your application can save its data and settings. The image on right (that I stole from MSDN library) shows you how application data store is organized. You have no other options to keep your files besides isolated storage because Windows Phone 7 does not allow you to save data directly to other file system locations. From MSDN: “Isolated storage enables managed applications to create and maintain local storage. The mobile architecture is similar to the Silverlight-based applications on Windows. All I/O operations are restricted to isolated storage and do not have direct access to the underlying operating system file system. Ultimately, this helps to provide security and prevents unauthorized access and data corruption.” Saving files from web to isolated storage I updated my RSS-reader so it reads RSS from web only if there in no local file with RSS. User can update RSS-file by clicking a button. Also file is created when application starts and there is no RSS-file. Why I am doing this? I want my application to be able to work also offline. As my code needs some more refactoring I provide it with some next postings about Windows Phone 7. If you want it sooner then please leave me a comment here. Here is the code for my RSS-downloader that downloads RSS-feed and saves it to isolated storage file calles rss.xml. public class RssDownloader {     private string _url;     private string _fileName;       public delegate void DownloadCompleteDelegate();     public event DownloadCompleteDelegate DownloadComplete;       public RssDownloader(string url, string fileName)     {         _url = url;         _fileName = fileName;     }       public void Download()     {         var request = (HttpWebRequest)WebRequest.Create(_url);         var result = (IAsyncResult)request.BeginGetResponse(ResponseCallback, request);            }       private void ResponseCallback(IAsyncResult result)     {         var request = (HttpWebRequest)result.AsyncState;         var response = request.EndGetResponse(result);           using(var stream = response.GetResponseStream())         using(var reader = new StreamReader(stream))         using(var appStorage = IsolatedStorageFile.GetUserStoreForApplication())         using(var file = appStorage.OpenFile("rss.xml", FileMode.OpenOrCreate))         using(var writer = new StreamWriter(file))         {             writer.Write(reader.ReadToEnd());         }           if (DownloadComplete != null)             DownloadComplete();     } } Of course I modified RSS-source for my application to use rss.xml file from isolated storage. As isolated storage files also base on streams we can use them everywhere where streams are expected. Reading isolated storage files As isolated storage files are opened as streams you can read them like usual files in your usual applications. The next code fragment shows you how to open file from isolated storage and how to read it using XmlReader. Previously I used response stream in same place. using(var appStorage = IsolatedStorageFile.GetUserStoreForApplication()) using(var file = appStorage.OpenFile("rss.xml", FileMode.Open)) {     var reader = XmlReader.Create(file);                      // more code } As you can see there is nothing complex. If you have worked with System.IO namespace objects then you will find isolated storage classes and methods to be very similar to these. Also mention that application storage and isolated storage files must be disposed after you are not using them anymore.

  Read the article

• I found two usb sticks on the ground. Now what?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• USB transfer speed "logarithmically" decreases. Why and can it be improved?

  - by starship

  I have an external hard drive. Just today I tried to copy a bigger file (it was film of ~230 MB) and at first it rushed up until ~70%. There is started decreasing. At first it started at around 56 MB/s Then it rapidly dropped to 23 MB/s (File transfer was 70% complete) Then it slowly started decreasing until it was around 2 MB/s (File was ~90% complete) When it finished the transfer it was slightly above 1.5 MB/s. To describe it graphically: If you drew a curve of the decrease it would probably resemble the graph of a logarithm function So, what I'm really asking is: "Why does this happen?" and "Is there a way around it?" Thank you!

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• Copying large files from USB devices to the internal hard drive fails on Mac OS

  - by John M. P. Knox

  I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• External USB HD with -optional- mains?

  - by Stephen

  Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

  Read the article

• Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

  - by ben

  I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

  Read the article

• USB drive was bootable, but no longer boots

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• USB drive was bootable, but no longer isn't

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• Is my "Generic" USB Flash Drive broken?

  - by Jesse J.

  So here is the situation. I find myself technological knowledgeable about many things ( I love to code, whether it's websites, C#, C++ or so on). However: My 2 toddlers (my wife actually) bought me a "Generic" 128 GB USB Storage Device (Usb Flash Drive) for Father's Day. I thought awesome at first..... WRONG! Nothing but problems with it. 3-4mb/s MAX transfer speed. I can bear with it. BUT! When I went to reformat my computer I transferred my save files from my games over to the stick and then the USB Stick managed to become corrupted. Not just a simple format would work either. It's screwed. I tried to use (Manually changed usb drive letter troubleshooting it to X) "chmod X: /X /F /R" with administrator rights, I did this after a long session to make it work with no errors (had to delete the log) and I finally recovered the files, however when I go to use it (transfer to or from) it transfers a couple kb to the stick or from it and then freezes, It says (Windows 7): Name: From: Folder (X:\File\Location) To: Folder C:\Users\Username\Desktop) Items Remaining: 0 (0 bytes) Speed: 0 bytes/second It does this forever... and ever... and ever... It transfered 3 files atleast, and then stopped. This is a new USB Stick bought from a "High" reputation company on eBay. Is the USB Stick screwed?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >