Search Results

Search found 721 results on 29 pages for 'uuid'.

Page 24/29 | < Previous Page | 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • centos install / partitioning

    - by ServerSideX
    I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

    Read the article

  • How to automatically start VM created by virt-manager?

    - by Jeff Shattock
    I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

    Read the article

  • How to delete removed devices from a mdadm RAID1?

    - by Kabuto
    I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

    Read the article

  • Grub Autostart with timeout

    - by BetaRide
    On Ubuntu 10.4 LTS I want Grub to start the default OS after 5 Seconds. I'd like to see the output of the startup scripts. Currently grub wait forever until I hit return and the output of the startup scripts isn't visible. Can someone tell me how I have to configure /etc/default/grub or any other setups? I tried to play with GRUB_TIMEOUT and GRUB_DEFAULT and did a sudo update-grub afterwards, but nothing changed. Any ideas? # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=5 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_SAVEDEFAULT=true # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux # GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

    Read the article

  • iOS bluetooth low energy not detecting peripherals

    - by user3712524
    My app won't detect peripherals. Im using light blue to simulate a bluetooth low energy peripheral and my app just won't sense it. I even installed light blue on two devices to make sure it was generating a peripheral signal properly and it is. Any suggestions? My labels are updating and the NSLog is showing that the scanning is starting. Thanks in advance. #import <UIKit/UIKit.h> #import <CoreBluetooth/CoreBluetooth.h> @interface ViewController : UIViewController @property (weak, nonatomic) IBOutlet UITextField *navDestination; @end #import "ViewController.h" @implementation ViewController - (IBAction)connect:(id)sender { } - (IBAction)navDestination:(id)sender { NSString *destinationText = self.navDestination.text; } - (void)viewDidLoad { } - (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } @end #import <UIKit/UIKit.h> #import "ViewController.h" @interface BlueToothViewController : UIViewController @property (strong, nonatomic) CBCentralManager *centralManager; @property (strong, nonatomic) CBPeripheral *discoveredPerepheral; @property (strong, nonatomic) NSMutableData *data; @property (strong, nonatomic) IBOutlet UITextView *textview; @property (weak, nonatomic) IBOutlet UILabel *charLabel; @property (weak, nonatomic) IBOutlet UILabel *isConnected; @property (weak, nonatomic) IBOutlet UILabel *myPeripherals; @property (weak, nonatomic) IBOutlet UILabel *aLabel; - (void)centralManagerDidUpdateState:(CBCentralManager *)central; - (void)centralManger:(CBCentralManager *)central didDiscoverPeripheral: (CBPeripheral *)peripheral advertisementData:(NSDictionary *)advertisementData RSSI:(NSNumber *)RSSI; -(void)centralManager:(CBCentralManager *)central didFailToConnectPeripheral:(CBPeripheral *)peripheral error:(NSError *)error; -(void)cleanup; -(void)centralManager:(CBCentralManager *)central didConnectPeripheral:(CBPeripheral *)peripheral; -(void)peripheral:(CBPeripheral *)peripheral didDiscoverServices:(NSError *)error; -(void)peripheral:(CBPeripheral *)peripheral didDiscoverCharacteristicsForService:(CBService *)service error:(NSError *)error; -(void)centralManager:(CBCentralManager *)central didDisconnectPeripheral:(CBPeripheral *)peripheral error:(NSError *)error; -(void)peripheral:(CBPeripheral *)peripheral didUpdateValueForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error; -(void)peripheral:(CBPeripheral *)peripheral didUpdateNotificationStateForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error; @end @interface BlueToothViewController () @end @implementation BlueToothViewController - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { _centralManager = [[CBCentralManager alloc]initWithDelegate:self queue:nil options:nil]; _data = [[NSMutableData alloc]init]; } - (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; [_centralManager stopScan]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } - (void)centralManagerDidUpdateState:(CBCentralManager *)central { //you should test all scenarios if (central.state == CBCentralManagerStateUnknown) { self.aLabel.text = @"I dont do anything because my state is unknown."; return; } if (central.state == CBCentralManagerStatePoweredOn) { //scan for devices [_centralManager scanForPeripheralsWithServices:nil options:@{ CBCentralManagerScanOptionAllowDuplicatesKey : @YES }]; NSLog(@"Scanning Started"); } if (central.state == CBCentralManagerStateResetting) { self.aLabel.text = @"I dont do anything because my state is resetting."; return; } if (central.state == CBCentralManagerStateUnsupported) { self.aLabel.text = @"I dont do anything because my state is unsupported."; return; } if (central.state == CBCentralManagerStateUnauthorized) { self.aLabel.text = @"I dont do anything because my state is unauthorized."; return; } if (central.state == CBCentralManagerStatePoweredOff) { self.aLabel.text = @"I dont do anything because my state is powered off."; return; } } - (void)centralManger:(CBCentralManager *)central didDiscoverPeripheral:(CBPeripheral *)peripheral advertisementData:(NSDictionary *)advertisementData RSSI:(NSNumber *)RSSI { NSLog(@"Discovered %@ at %@", peripheral.name, RSSI); self.myPeripherals.text = [NSString stringWithFormat:@"%@%@",peripheral.name, RSSI]; if (_discoveredPerepheral != peripheral) { //save a copy of the peripheral _discoveredPerepheral = peripheral; //and connect NSLog(@"Connecting to peripheral %@", peripheral); [_centralManager connectPeripheral:peripheral options:nil]; self.aLabel.text = [NSString stringWithFormat:@"%@", peripheral]; } } -(void)centralManager:(CBCentralManager *)central didFailToConnectPeripheral:(CBPeripheral *)peripheral error:(NSError *)error { NSLog(@"Failed to connect"); [self cleanup]; } -(void)cleanup { //see if we are subscribed to a characteristic on the peripheral if (_discoveredPerepheral.services != nil) { for (CBService *service in _discoveredPerepheral.services) { if (service.characteristics != nil) { for (CBCharacteristic *characteristic in service.characteristics) { if ([characteristic.UUID isEqual:[CBUUID UUIDWithString:@"508EFF8E-F541-57EF-BD82-B0B4EC504CA9"]]) { if (characteristic.isNotifying) { [_discoveredPerepheral setNotifyValue:NO forCharacteristic:characteristic]; return; } } } } } } [_centralManager cancelPeripheralConnection:_discoveredPerepheral]; } -(void)centralManager:(CBCentralManager *)central didConnectPeripheral:(CBPeripheral *)peripheral { NSLog(@"Connected"); [_centralManager stopScan]; NSLog(@"Scanning stopped"); self.isConnected.text = [NSString stringWithFormat:@"Connected"]; [_data setLength:0]; peripheral.delegate = self; [peripheral discoverServices:nil]; } -(void)peripheral:(CBPeripheral *)peripheral didDiscoverServices:(NSError *)error { if (error) { [self cleanup]; return; } for (CBService *service in peripheral.services) { [peripheral discoverCharacteristics:nil forService:service]; } //discover other characteristics } -(void)peripheral:(CBPeripheral *)peripheral didDiscoverCharacteristicsForService:(CBService *)service error:(NSError *)error { if (error) { [self cleanup]; return; } for (CBCharacteristic *characteristic in service.characteristics) { [peripheral setNotifyValue:YES forCharacteristic:characteristic]; } } -(void)peripheral:(CBPeripheral *)peripheral didUpdateValueForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error { if (error) { NSLog(@"Error"); return; } NSString *stringFromData = [[NSString alloc]initWithData:characteristic.value encoding:NSUTF8StringEncoding]; self.charLabel.text = [NSString stringWithFormat:@"%@", stringFromData]; //Have we got everything we need? if ([stringFromData isEqualToString:@"EOM"]) { [_textview setText:[[NSString alloc]initWithData:self.data encoding:NSUTF8StringEncoding]]; [peripheral setNotifyValue:NO forCharacteristic:characteristic]; [_centralManager cancelPeripheralConnection:peripheral]; } } -(void)peripheral:(CBPeripheral *)peripheral didUpdateNotificationStateForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error { if ([characteristic.UUID isEqual:nil]) { return; } if (characteristic.isNotifying) { NSLog(@"Notification began on %@", characteristic); } else { [_centralManager cancelPeripheralConnection:peripheral]; } } -(void)centralManager:(CBCentralManager *)central didDisconnectPeripheral:(CBPeripheral *)peripheral error:(NSError *)error { _discoveredPerepheral = nil; self.isConnected.text = [NSString stringWithFormat:@"Connecting..."]; [_centralManager scanForPeripheralsWithServices:nil options:@{ CBCentralManagerScanOptionAllowDuplicatesKey : @YES}]; } @end

    Read the article

  • axis2 web service behave differently when tested with web service client or with local test class

    - by Stefano
    Hello I need to update a facade to some web service proxy classes to a third party web service, and expose them as a service. This for two reason : to maintain the same interface for all application that need to use the system : actually its migrating and there are a few differences in the third party ws (method names); and to expose a simplified interface. The third party has provided me with a manual and some pregenerated proxy classes to their service (the java file says generated with axis2 1,4) . I've used netbeans 6.8 and the axis2 plugin to create an axis2 service . This service contains the proxy classes and the facade class which instantiate the web service proxy and calls its method; the facade class is exposed as service. I've used axis2 1.4 (at beginnig and later 1.5 ) and tomcat 6.0. The first test i did was to call the facede methods from inside the project itself and it worked. Then i've created a new project with a jax-ws web service client to call my class deployed on axis2. At this point has happened two strange thing : In the axis2 services page has appeared the third party proxy class as if it were a new service (if i try to get the wsdl axis raises an error ). eg. the proxy interface is named WebServiceAPI (_stub is the concrete class) and , after the first call to my service , i find a new "WebServicesAPI1272968932531_1" service inside axis . The call obvoiusly fail i've began to sniff soap messages with wireshark and i've found they differs when using proxy classes direclty from my facade test class by the messages created after being deployed on axis. i've noticed they differs for the presence of the soap header in the failing message. any help would be greatly appreciated : maybe i messed up something, there might be some incompatibilities or version mistakes? below i've added the signature of the third party proxy, its impementation and the different soap messages: /* * WebServicesAPI.java * This file was auto-generated from WSDL * by the Apache Axis2 version: 1.4 Built on : Apr 26, 2008 (06:24:30 EDT) */ package com.ibm.eci.wsapi; public interface WebServicesAPI { public com.ibm.eci.wsapi.ArrayOfstring getWorkItemHistory( java.lang.String stateKey,java.lang.String logonID,com.ibm.eci.wsapi.RepoItemHandle workItemHandle) throws java.rmi.RemoteException,com.ibm.eci.wsapi.ExceptionException0; ...etc the concrete class is : /** * WebServicesAPIStub.java * * This file was auto-generated from WSDL * by the Apache Axis2 version: 1.4 Built on : Apr 26, 2008 (06:24:30 EDT) */ package com.ibm.eci.wsapi; /* * WebServicesAPIStub java implementation */ public class WebServicesAPIStub extends org.apache.axis2.client.Stub implements WebServicesAPI{ protected org.apache.axis2.description.AxisOperation[] _operations; ... public com.ibm.eci.wsapi.ArrayOfstring getWorkItemHistory( java.lang.String stateKey297,java.lang.String logonID298,com.ibm.eci.wsapi.RepoItemHandle workItemHandle299) throws java.rmi.RemoteException ,com.ibm.eci.wsapi.ExceptionException0{ org.apache.axis2.context.MessageContext _messageContext = null; try{ org.apache.axis2.client.OperationClient _operationClient = _serviceClient.createClient(_operations[0].getName()); _operationClient.getOptions().setAction("\"\""); _operationClient.getOptions().setExceptionToBeThrownOnSOAPFault(true); addPropertyToOperationClient(_operationClient,org.apache.axis2.description.WSDL2Constants.ATTR_WHTTP_QUERY_PARAMETER_SEPARATOR,"&"); // create a message context _messageContext = new org.apache.axis2.context.MessageContext(); // create SOAP envelope with that payload org.apache.axiom.soap.SOAPEnvelope env = null; com.ibm.eci.wsapi.GetWorkItemHistoryE dummyWrappedType = null; env = toEnvelope(getFactory(_operationClient.getOptions().getSoapVersionURI()), stateKey297, logonID298, workItemHandle299, dummyWrappedType, optimizeContent(new javax.xml.namespace.QName("http://wsapi.eci.ibm.com", "getWorkItemHistory"))); //adding SOAP soap_headers _serviceClient.addHeadersToEnvelope(env); // set the message context with that soap envelope _messageContext.setEnvelope(env); // add the message contxt to the operation client _operationClient.addMessageContext(_messageContext); //execute the operation client _operationClient.execute(true); org.apache.axis2.context.MessageContext _returnMessageContext = _operationClient.getMessageContext( org.apache.axis2.wsdl.WSDLConstants.MESSAGE_LABEL_IN_VALUE); org.apache.axiom.soap.SOAPEnvelope _returnEnv = _returnMessageContext.getEnvelope(); java.lang.Object object = fromOM( _returnEnv.getBody().getFirstElement() , com.ibm.eci.wsapi.GetWorkItemHistoryResponseE.class, getEnvelopeNamespaces(_returnEnv)); return getGetWorkItemHistoryResponse_return((com.ibm.eci.wsapi.GetWorkItemHistoryResponseE)object); ... the failing soap message (generated by jax-ws client to the axis deployed service) is : POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing"> <wsa:To>http://n0611049:9083/vbr_wsapi/services/WebServicesAPI.Endpoint</wsa:To> <wsa:MessageID>urn:uuid:A31AD99897F9045E981272964443982</wsa:MessageID><wsa:Action>""</wsa:Action> </soapenv:Header> <soapenv:Body> <ns1:initializeProps xmlns:ns1="http://wsapi.eci.ibm.com"> <props><val>client.locale=it_IT</val> </props> </ns1:initializeProps> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 500 Internal Server Error Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Connection: Close Date: Tue, 04 May 2010 09:16:15 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing"> <wsa:Action>http://www.w3.org/2005/08/addressing/fault</wsa:Action> <wsa:RelatesTo>urn:uuid:A31AD99897F9045E981272964443982</wsa:RelatesTo> <wsa:FaultDetail> <wsa:ProblemAction> <wsa:Action>""</wsa:Action> </wsa:ProblemAction> </wsa:FaultDetail> </soapenv:Header> <soapenv:Body> <soapenv:Fault xmlns:wsa="http://www.w3.org/2005/08/addressing"> <faultcode>wsa:ActionNotSupported</faultcode> <faultstring>The [action] cannot be processed at the receiver.</faultstring> <detail /> </soapenv:Fault> </soapenv:Body> </soapenv:Envelope> the succesful call (generated by my local test class, not being deployed to axis yet) : POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <ns1:initializeProps xmlns:ns1="http://wsapi.eci.ibm.com"> <props> <val>client.locale=it_IT</val> </props> </ns1:initializeProps> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 200 OK Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Date: Tue, 04 May 2010 09:40:03 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <dlwmin:initializePropsResponse xmlns:dlwmin="http://wsapi.eci.ibm.com"> <return>e0e40cc51ceb0adf96c582bb6e047b3d0f</return> </dlwmin:initializePropsResponse> </soapenv:Body> </soapenv:Envelope> POST /vbr_wsapi/services/WebServicesAPI.Endpoint HTTP/1.1 Content-Type: text/xml; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: n0611049:9083 Transfer-Encoding: chunked <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <ns1:logon xmlns:ns1="http://wsapi.eci.ibm.com"> <stateKey>e0e40cc51ceb0adf96c582bb6e047b3d0f</stateKey> <systemID>----</systemID> <authBundle> <password>-----</password> <sealed>false</sealed> <username>---</username> </authBundle> </ns1:logon> </soapenv:Body> </soapenv:Envelope> HTTP/1.1 200 OK Content-Type: text/xml; charset=UTF-8 Content-Language: en-US Transfer-Encoding: chunked Date: Tue, 04 May 2010 09:40:21 GMT Server: WebSphere Application Server/7.0 <?xml version='1.0' encoding='UTF-8'?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <dlwmin:logonResponse xmlns:dlwmin="http://wsapi.eci.ibm.com"> <return>e0e40cc51ceb0adf96c582bb6e047b3d10</return> </dlwmin:logonResponse> </soapenv:Body> </soapenv:Envelope> ... goes on with other calls

    Read the article

  • Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

    - by ip
    Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

    Read the article

  • Usinng svnadmin dump to revert the latest revision committed

    - by Wux
    What I need is that the latest (mistake) revision being reverted and that the repository does not store it in anyway. That is, I'm trying to erase the latest revision out of existence, NOT trying to fix things by coming back to the latest-1 revision. In other words, I want to avoid the repository growing in size. Suppose head revision is 100. I knew that the suggested answer is that svnadmin dump -r0:80 old-repo | svnadmin load --force-uuid new-repo. What I'm confusing myself about is why not svnadmin dump -r81:100 old-repo Why the first and not the second solution? I suppose svnadmin dump will erase the repository completely? And keeping only revision 0 - 80 in a dump file? Is my understanding of "taking a part out of the repository into a dump file" about svnadmin dump completely wrong? (That is revision 81 - 100 is still there) Sincere apologies if this has been asked. I did spend some time searching though no specific things about this were found. A topic link in case I miss it would be greatly appreciated.

    Read the article

  • Python - multithreading / multiprocessing, very strange problem.

    - by orokusaki
    import uuid import time import multiprocessing def sleep_then_write(content): time.sleep(5) print(content) if __name__ == '__main__': for i in range(15): p = multiprocessing.Process(target=sleep_then_write, args=('Hello World',)) p.start() print('Ah, what a hard day of threading...') This script output the following: Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... AAh, what a hard day of threading.. h, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Firstly, why the heck did it print the bottom statement sixteen times (one for each process) instead of just the one time? Second, notice the AAh, and h, about half way down; that was the real output. This makes me wary of using threads ever, now. (Windows XP, Python 2.6.4, Core 2 Duo)

    Read the article

  • Db4o Mvc Application Architecture

    - by Mac
    I am currently testing out Db4o for an asp.net MVC 2 application idea but there are a few things I'm not quite sure on the best way to proceed. I want my application to use guessable routes rather than Id's for referencing my entities but I also think I need Id's of some sort for update scenarios. so for example I want /country/usa instead of /country/1 I may want to change the key name though (not perhaps on a country but on other entities) so am thinking I need an Id to use as the reference to retrieve the object prior to updating it's fields. From other comments it seems like the UUID is a bit long to be using and would prefer to use my own id's anyway for clean separation of concerns. Looking at both the KandaAlpha project I wasn't too keen on some aspects of the design and prefer something more along the lines of S#arp architecture where they use things like the [domainsignature] and EntityWithTypedId, IEntityDuplicateChecker, IHasAssignedId, BaseObject and IValidatable in their entities to control insert/update behaviour which seems cleaner and more extensible, covers validation and is encapsulated well within the core and base repository classes. So would a port of S#arp architecture to Db4o make sense of am I still thinking rmdbs in an oodb world? Also is there a best practice for managing indexes (including Unique ones as above) in Db4o? Should they be model metadata based and loaded using DI in a bootstrapper for example or should they be more loaded more like Automapper.CreateMap? Its a bit of a rambling question I know but any thoughts, ideas or suggested reading material is greatly appreciated. Thanks Mac

    Read the article

  • Extracting a specific value from command-line output using powershell

    - by Andrew Shepherd
    I've just started learning PowerShell this morning, and I'm grappling with the basics. Here's the problem: I want to query subversion for the revision number of a repository, and then create a new directory with this revision number. The command svn_info outputs a number of label\value pairs, delimited by colons. For example Path: c# URL: file:///%5Copdy-doo/Archive%20(H)/Development/CodeRepositories/datmedia/Development/c%23 Repository UUID: b1d03fca-1949-a747-a1a0-046c2429f46a Revision: 58 Last Changed Rev: 58 Last Changed Date: 2011-01-12 11:36:12 +1000 (Wed, 12 Jan 2011) Here is my current code which solves the problem. Is there a way to do this with less code? I'm thinking that with the use of piping you could do this with one or two lines. I certainly shouldn't have to use a temporary file. $RepositoryRoot = "file:///%5Cdat-ftp/Archive%20(H)/Development/CodeRepositories/datmedia" $BuildBase="/Development/c%23" $RepositoryPath=$RepositoryRoot + $BuildBase # Outputing the info into a file svn info $RepositoryPath | Out-File -FilePath svn_info.txt $regex = [regex] '^Revision: (\d{1,4})' foreach($info_line in get-content "svn_info.txt") { $match = $regex.Match($info_line); if($match.Success) { $revisionNumber = $match.Groups[1]; break; } } "Revision number = " + $revisionNumber;

    Read the article

  • Bluetooth on 2.0+

    - by awiden
    I'm doing bluetooth development for connecting with a PC. I've basicly used the BTChatExample and changed the UUID to the standard PC SPP-profile. Trying to close a bluetooth application during a blocking read, by closing the BluetoothSocket will leave the Bluetooth stack in a unusable state. This can only be fixed by disabling and enabling bluetooth and restarting the application. Checking logcat, you can see that some of the internal methods are failing, leaving a open port. Any information on this? First of all there seams to be differences on how bluetooth is implemented on N1 and HTC Legend/Desire both running 2.1, do you know anything about this? Connecting isn't 100% reliable, sometimes I get a warning saying ~PortSystemContext init: FAILED. This leaves bluetooth unusable, and restarting is needed. Am I right in assuming that SPP is the only profile supported for use with the APIs? That's what the docs on the BluetoothAdapter says. I would love to discuss issues on bluetooth with a developer and iron out these bugs so that Android can have good proper BT support it deserves.

    Read the article

  • How can I stop SharePoint from appending <mso:CustomDocumentProperties> to my output

    - by tath.am
    I'm trying to hack together an extra feature on top of a POC (smoke and mirrors demo). The POC is on SPS 2007 and I need to integrate with another system. To facilitate part of this, I need to provide a JSONP endpoint. I want this URL: http://sharepoint:2024/Pages/SomeExternalSystem/Payload.aspx?callback=abc To return this: abc({ sampleField1: "sampleData1", sampleField2: 234.56 }); It's all smoke and mirrors anyway, so I uploaded this file to SharePoint: <%@ Page ContentType="text/javascript" Language="C#" %> <%= Request.QueryString["callback"] %>({ sampleField1: "sampleData1", sampleField2: 234.56 }); (And added a page parser rule to allow it to compile the code blocks.) No matter what I seem to do, SharePoint emits this instead: abc({ sampleField1: "sampleData1", sampleField2: 234.56 }); <html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882"><head> <!--[if gte mso 9]><xml> <mso:CustomDocumentProperties> <mso:PublishingContactPicture msdt:dt="string"></mso:PublishingContactPicture> <mso:PublishingRollupImage msdt:dt="string"></mso:PublishingRollupImage> <mso:Audience msdt:dt="string"></mso:Audience> <mso:PublishingContactName msdt:dt="string"></mso:PublishingContactName> <mso:ContentType msdt:dt="string">Page</mso:ContentType> <mso:Comments msdt:dt="string"></mso:Comments> <mso:PublishingContactEmail msdt:dt="string"></mso:PublishingContactEmail> </mso:CustomDocumentProperties> </xml><![endif]--> </head> It's proving hard to Google for.

    Read the article

  • Symbolicate adhoc iphone app crashes.

    - by gotye
    Hey everyone, I can't manage to make my code symbolicated ... I read the part "below" : Given a crash report, the matching binary, and its .dSYM file, symbolication is relatively easy. The Xcode Organizer window has a tab for crash reports of the currently selected device. You can view externally received crash reports in this tab - just place them in the appropriate directory. This is the same as the Mac OS X directory described in the first section. It doesn't matter which device you have tethered, but the directory in which you place the crash report must be the directory for the tethered and selected device. It is not necessary to place the binary and .dSYM file in any particular location. Xcode uses Spotlight and the UUID to locate the correct files. It is necessary, though, that both files be in the same directory and that this directory is one that is indexed by Spotlight. Anywhere in your home directory should be fine. But it doesn't work for me ... here is what I did : I opened xcode organizer and I had my iphone device with crash logs App and dsym files are in my xcode project which is on my desktop All the rest should be automatic, right ? but crash logs aren't symbolicated yet ... Any comments welcome. Cheers. Gotye.

    Read the article

  • JMS MessageCreator.createMessage() in Grails

    - by Hans Wurst
    Hi there, I am trying to implement jms to my grails application. I have several JMS consumer in a spring based enviroment listining on an ActiveMQ broker. I wrote a simple test commandline client which creates messages and receives them in an request response manner. Here is the snippet that sends a MapMessage in Spring JMS way. This works for me as long I am in my spring world. final String corrID = UUID.randomUUID().toString(); asyncJmsTemplate.send("test.RequestQ", new MessageCreator() { public Message createMessage(Session session) throws JMSException { try { MapMessage msg = session.createMapMessage(); msg.setStringProperty("json", mapper.writeValueAsString(List<of some objects>)); msg.setJMSCorrelationID(corrID); msg.setJMSReplyTo(session.createQueue("test.ReplyQ")); return msg; } catch (JsonGenerationException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (JsonMappingException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } return null; } }); BUT when I tried to implement this methods to my grails test app I receive some METHOD_DEF exceptions. Sending simple TextMessages via the jmsTemplate.convertAndSende(Queue, Message) provided by the JMS Plugin works. Can any one help me? Is this a common problem? Cheers Hans

    Read the article

  • Microsoft OLE DB Provider for SQL Server error '80040e14' Could not find stored procedure

    - by BBlake
    I am migrating a classic ASP web app to new servers. The database back end is migrating from SQL Server 2000 to SQL Server 2008, and the app is moving from Win2000 x86 to Win2003R2 x64. I am getting the above error on every single stored procedure call within the application. I have verified: Yes, the SQL user is set up, using correct username and password Yes, the SQL user has execute permissions on the stored procedures in the database Yes, I have updated the TypeLib references to the new UUID Yes, I have logged into the database via SSMS with the SQL user id and it can see and execute the stored procedures just fine in SSMS, but not from the web app. Yes, the SQL user has the database set as its default database. The most frustrating thing is it works fine on the DEV server, but not on the production server. I have gone through every IIS setting 5 or 6 times and the web app is set up precisely the same in both environments. The only difference is the database server name in the connection string (DEV vs prod) EDIT: I have also tried pointing the prod web box at the dev database server and get the same error so I'm fairly sure the issue isn't on the database side.

    Read the article

  • Mapping Cassandra Super Columns

    - by Laubstein
    Hello dudes, I guess everybody that played with Cassandra already read this article. I trying to create my schema on CassandraCli, but I am having a lot of problems, can someone guide me to the right way? I am trying to create a similar structure like the Comments column family from the article. In CassandraCli terminal I type: create column family posts with column_type = ‘Super’ and comparator = ‘AsciiType’ and subcomparator = TimeUUIDType; It works fine, there is no doc telling me that if I add a column_metadata attribute those will be for the super columns cause my column family is of type super, i can’t find if it is true so: create column family posts with column_type = ‘Super’ and comparator = ‘AsciiType’ and subcomparator = ‘TimeUUIDType’ and column_metadata = [{column_name:'body'}]; I am trying to create the same as the comment column family of the article, but when i try to populate set posts['post1'][timeuuid()][body] = ‘Hello I am Goku!’; i got: Invalid UUID string: body I guess because i chose the subcomparator be of type timeuuid and the body is a string, it should be a timeuuid, so HOW my columns inside the super column which is the type timeuuid could holds columns with string type names as the comments of the article are created? Thanks

    Read the article

  • Ruby - encrypted_strings

    - by Tom Andersen
    A bit of a Ruby newbie here - should be an easy question: I want to use the encrypted_strings gem to create a password encrypted string: (from http://rdoc.info/projects/pluginaweek/encrypted_strings) Question is: Everything works fine, but how come I don't need the password to decrypt the string? Say I want to store the string somewhere for a while,like the session. Is the password also stored with it? (which would seem very strange?). And no, I'm not planning on using 'secret-key' or any similar hack as a password. I am planning on dynamically generating a class variable @@password using a uuid, which I don't store other than in memory, and can change from one running of the program to the next. Symmetric: >> password = 'shhhh' => "shhhh" >> crypted_password = password.encrypt(:symmetric, :password => 'secret_key') => "qSg8vOo6QfU=\n" >> crypted_password.class => String >> crypted_password == 'shhhh' => true >> password = crypted_password.decrypt => "shhhh"

    Read the article

  • iphone localization

    - by hardik
    hello all when i run the command to generate Localizable.string file from my terminal it says me bad entry in to the classes file the file gets generated but it has no entry in it infact it should have entry in it. Here is what i am running in my terminal but somehow it is not happening please guide me need to solve this Last login: Mon Jun 7 18:02:09 on ttys000 comp10:~ admin$ cd .. comp10:Users admin$ cd .. comp10:/ admin$ cd /Users/admin/Desktop/localisationwithcode comp10:localisationwithcode admin$ sudo usage: sudo -K | -L | -V | -h | -k | -l | -v usage: sudo [-HPSb] [-p prompt] [-u username|#uid] { -e file [...] | -i | -s | <command> } comp10:localisationwithcode admin$ genstrings Classes/*.m Bad entry in file Classes/localisationwithcodeViewController.m (line = 35): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 36): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 37): Argument is not a literal string. Bad entry in file Classes/localisationwithcodeViewController.m (line = 38): Argument is not a literal string. 2010-06-07 18:04:45.047 genstrings[3851:10b] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35 comp10:localisationwithcode admin$

    Read the article

  • What is the best way to extend restful_authentication/AuthLogic to support lazy logins by an anonymo

    - by Kevin Elliott
    I'm building an iPhone application that talks to a Ruby on Rails backend. The Ruby on Rails application will also service web users. The restful_authentication plugin is an excellent way to provide quick and customizable user authentication. However, I would like users of the iPhone application to have an account created automatically by the phone's unique identifier ([[UIDevice device] uniqueIdentifier]) stored in a new column. Later, when users are ready to create a username/password, the account will be updated to contain the username and password, leaving the iPhone unique identifier intact. Users should not be able to access the website until they've setup their username/password. They can however, use the iPhone application, since the application can authenticate itself using it's identifier. What is the best way to modify restful_authentication to do this? Create a plugin? Or modify the generated code? What about alternative frameworks, such as AuthLogic. What is the best way to allow iPhones to get a generated auth token locked to their UUID's, but then let the user create a username/password later?

    Read the article

  • Help with ZK component development

    - by Lucas
    I'm developing a simple component. My jar structure is: br/netsoft/zkComponents/Tef.class META-INF/MANIFEST.MF metainfo/zk/lang-addon.xml web/js/br/netsoft/zkComponents.js web/zkComponents/tef.dsp My dsp file is: <c:set var="self" value="${requestScope.arg.self}"/> <span z.type="br.netsoft.zkComponents.Tef" id="${self.uuid}" ${self.outerAttrs}${self.innerAttrs}> <applet archive="tef.jar" id="tefApplet" code="br.netsoft.applets.tef.TEFProxy" width="0px" height="0px" /> <span/> and the language-addon.xml is: <language-addon> <addon-name>componentes</addon-name> <language-name>xul/html</language-name> <component> <component-name>tef</component-name> <component-class>br.netsoft.zkComponents.Tef</component-class> <mold> <mold-name>default</mold-name> <mold-uri>~./zkComponents/tef.dsp</mold-uri> </mold> </component> </language-addon> When i try to test this component, appears a pop-up showing : " /js/br/netsoft/zkComponents.js not found" what is wrong?

    Read the article

  • Does the COM server have to call SysFreeString() for an [out] parameter?

    - by sharptooth
    We have the following interface: [object, uuid("uuidhere"), dual ] interface IInterface : IDispatch { [id(1), propget] HRESULT CoolProperty( [out, retval] BSTR* result ); } Now there's a minor problem. On one hand the parameter is "out" and so any value can be passed as input, the parameter will become valid only upon the successful return. On the other hand, there's this MSDN article which is linked to from many pages that basically says (the last paragraph) that if any function is passed a BSTR* it must free the string before assigning a new string. That's horrifying. If that article is right it means that all the callers must surely pass valid BSTRs (maybe null BSTRs), otherwise BSTR passed can be leaked. If the caller passed a random value and the callee tries to call SysFreeString() it runs into undefined behavior, so the convention is critical. Then what's the point in the [out] attribute? What will be the difference between the [in, out] and [out] in this situation? Is that article right? Do I need to free the passed BSTR [out] parameter before assigning a new one?

    Read the article

  • Reuse Client java Socket in a Java Server

    - by user1394983
    I'm devoloping an Java server two control an android online game. It's possible save the client socket of myserversocket.accept() in a variable in Client class? This are very util because this way, server can communicate with client when server wants and no when client contact server. My actual code are: import java.io.IOException; import java.io.ObjectInputStream; import java.io.ObjectOutputStream; import java.net.ServerSocket; import java.net.Socket; import java.util.ArrayList; import java.util.UUID; import sal.app.shared.Packet; public class Server { private ArrayList<GameSession> games = new ArrayList<GameSession>(); private ArrayList<Client> pendent_clients = new ArrayList<Client>(); private Packet read_packet= new Packet(); private Packet sent_packet = new Packet(); private Socket clientSocket = null; public static void main(String[] args) throws ClassNotFoundException{ ServerSocket serverSocket = null; //DataInputStream dataInputStream = null; //DataOutputStream dataOutputStream = null; ObjectOutputStream oos=null; ObjectInputStream ois=null; Server myServer = new Server(); try { serverSocket = new ServerSocket(7777); System.out.println("Listening :7777"); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } while(true){ try { myServer.clientSocket = new Socket(); myServer.clientSocket = serverSocket.accept(); myServer.read_packet = new Packet(); myServer.sent_packet = new Packet(); oos = new ObjectOutputStream(myServer.clientSocket.getOutputStream()); ois = new ObjectInputStream(myServer.clientSocket.getInputStream()); //dataInputStream = new DataInputStream(clientSocket.getInputStream()); //dataOutputStream = new DataOutputStream(clientSocket.getOutputStream()); //System.out.println("ip: " + clientSocket.getInetAddress()); //System.out.println("message: " + ois.read()); //dataOutputStream.writeUTF("Hello!"); /*while ((myServer.read_packet = (Packet) ois.readObject()) != null) { myServer.handlePacket(myServer.read_packet); break; }*/ myServer.read_packet=(Packet) ois.readObject(); myServer.handlePacket(myServer.read_packet); //oos.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } finally{ if( myServer.clientSocket!= null){ /*try { //myServer.clientSocket.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ } /*if( ois!= null){ try { ois.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if( oos!= null){ try { oos.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } }*/ } } } public void handlePacket(Packet hp) throws IOException { if(hp.getOpCode() == 1) { registPlayer(hp); } } public void registPlayer(Packet p) throws IOException { Client registClient = new Client(this.clientSocket); this.pendent_clients.add(registClient); if(pendent_clients.size() == 2) { initAGame(); } else { ObjectOutputStream out=null; Packet to_send = new Packet(); to_send.setOpCode(4); out = new ObjectOutputStream(registClient.getClientSocket().getOutputStream()); out.writeObject(to_send); } } public void initAGame() throws IOException { Client c1 = pendent_clients.get(0); Client c2 = pendent_clients.get(1); Packet to_send = new Packet(); ObjectOutputStream out=null; GameSession incomingGame = new GameSession(c1,c2); games.add(incomingGame); to_send.setGameId(incomingGame.getGameId()); to_send.setOpCode(5); out = new ObjectOutputStream(c1.getClientSocket().getOutputStream()); out.writeObject(to_send); out = new ObjectOutputStream(c2.getClientSocket().getOutputStream()); out.writeObject(to_send); pendent_clients.clear(); } public Client getClientById(UUID given_id) { for(GameSession gs: games) { if(gs.getClient1().getClientId().equals(given_id)) { return gs.getClient1(); } else if(gs.getClient2().getClientId().equals(given_id)) { return gs.getClient2(); } } return null; } } With this code i got this erros: java.net.SocketException: Broken pipe at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java:1847) at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(ObjectOutputStream.java:1756) at java.io.ObjectOutputStream.writeNonProxyDesc(ObjectOutputStream.java:1257) at java.io.ObjectOutputStream.writeClassDesc(ObjectOutputStream.java:1211) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1395) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158) at java.io.ObjectOutputStream.writeFatalException(ObjectOutputStream.java:1547) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:333) at Server.initAGame(Server.java:146) at Server.registPlayer(Server.java:120) at Server.handlePacket(Server.java:106) at Server.main(Server.java:63) This error ocurre when second client connect and server try to send an Packet to previous client 1 in function initGame() in this code: out = new ObjectOutputStream(c1.getClientSocket().getOutputStream()); out.writeObject(to_send); my android code is this: package sal.app; import java.io.DataInputStream; import java.io.DataOutputStream; import java.io.IOException; import java.io.ObjectInputStream; import java.io.ObjectOutputStream; import java.net.Socket; import java.net.UnknownHostException; import sal.app.logic.DataBaseManager; import sal.app.shared.Packet; import android.app.Activity; import android.os.Bundle; import android.view.Window; import android.view.WindowManager; public class MultiPlayerWaitActivity extends Activity{ private DataBaseManager db; public void onCreate(Bundle savedInstanceState) { super.requestWindowFeature(Window.FEATURE_NO_TITLE); super.getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN,WindowManager.LayoutParams.FLAG_FULLSCREEN); super.onCreate(savedInstanceState); setContentView(R.layout.multiwaitlayout); db=DataBaseManager.getSalDatabase(this); db.teste(); try { db.createDataBase(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } Socket socket = null; ObjectOutputStream outputStream = null; ObjectInputStream inputStream = null; //System.out.println("dadadad"); try { socket = new Socket("192.168.1.4", 7777); //Game = new MultiPlayerGame(new ServerManager("192.168.1.66"),new Session(), new Player("")); outputStream = new ObjectOutputStream(socket.getOutputStream()); inputStream = new ObjectInputStream(socket.getInputStream()); //dataOutputStream.writeUTF(textOut.getText().toString()); //textIn.setText(dataInputStream.readUTF()); Packet p = new Packet(); Packet r = new Packet(); p.setOpCode(1); outputStream.writeObject(p); /*try { r=(Packet)inputStream.readObject(); } catch (ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ //while(true){ //dataInputStream = new DataInputStream(clientSocket.getInputStream()); //dataOutputStream = new DataOutputStream(clientSocket.getOutputStream()); //System.out.println("ip: " + clientSocket.getInetAddress()); //System.out.println("message: " + ois.read()); //dataOutputStream.writeUTF("Hello!"); /*while ((r= (Packet) inputStream.readObject()) != null) { handPacket(r); break; }*/ r=(Packet) inputStream.readObject(); handPacket(r); //oos.close(); //} /*System.out.println(r.getOpCode()); if(r.getOpCode() == 5) { this.finish(); }*/ } catch (UnknownHostException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } /*finally{ if (socket != null){ try { socket.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if (outputStream != null){ try { outputStream.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if (inputStream != null){ try { inputStream.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }*/ //catch (ClassNotFoundException e) { // TODO Auto-generated catch block //e.printStackTrace(); //} catch (ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } } public void handPacket(Packet hp) { if(hp.getOpCode() == 5) { this.finish(); } this.finish(); } } Regards

    Read the article

  • svnsync loses revision properties although hook installed

    - by roesslerj
    Hello all! I have a pretty weird problem. We have setup an SVN-Mirror via cronjob (because it needs to go from inside to outside of a firewall, so no post-commit-hook possible) and svnsync. We installed a pre-revprop-hook just as told. Everything seems to work fine, except that it doesn't. E.g. when manually executing the script. # svnsync --non-interactive sync file://<path-to-mirror> --source-username <usr> --source-password <pwd> Committed revision 19817. Copied properties for revision 19817. No error, no complaints. But if checking for the revision properties it says: # svnlook info <path-to-mirror> 0 # svn info -r HEAD file://<path-to-mirror> 2>&1 Path: <root-of-mirror> URL: file://<path-to-mirror> Repository Root: file://<path-to-mirror> Repository UUID: <uid> Revision: 19817 Node Kind: directory Last Changed Rev: 19817 So somehow the author and timestamp information gets lost. But we need that information for our internal processes. Since no error or warning is produced I have absolutely no idea even where to start to look. Everything is local (except for the remote master), so there are no server-logs to look at. I also tried to manually recopy via svnsync copy-revprops (http://chestofbooks.com/computers/revision-control/subversion-svn/svnsync-Copy-revprops-Ref-svnsync-C-Copy-revprops.html). It says Copied properties for revision 19885. But when I query them, it's just the same. Any ideas how I could approach that problem, or even better -- how to solve it? Any ideas appreciated.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29  | Next Page >