Search Results

Search found 9370 results on 375 pages for 'wcf rest contrib'.

Page 24/375 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• What am I missing about WCF?

  - by Bigtoe

  I've been developing in MS technologies for longer than I care to remember at this stage. When .NET arrived on the scene I thought they hit the nail on the head and with each iteration and version I thought their technologies were getting stronger and stronger and looked forward to each release. However, having had to work with WCF for the last year I must say I found the technology very difficult to work with and understand. Initially it's quite appealing but when you start getting into the guts of it, configuration is a nightmare, having to override behaviours for message sizes, number of objects contained in a messages, the complexity of the security model, disposing of proxies when faulted and finally moving back to defining interfaces in code rather than in XML. It just does not work out of the box and I think it should. We found all of the above issues while either testing ourselves or else when our products were out on site. I do understand the rationale behind it all, but surely they could have come up with simpler implementation mechanism. I suppose what I'm asking is, Am I looking at WCF the wrong way? What strengths does it have over the alternatives? Under what circumstances should I choose to use WCF? OK Folks, Sorry about the delay in responding, work does have a nasty habbit of get in the way somethimes :) Some clarifications My main paint point with WCF I suppose falls down into the following areas While it does work out of the box, your left with some major surprises under the hood. As pointed out above basic things are restricted until they are overridden Size of string than can be passed can't be over 8K Number of objects that can be passed in a single message is restricted Proxies not automatically recovering from failures The amount of configuration while it's there is a good thing, but understanding it all and what to use what and under which circumstances can be difficult to understand. Especially when deploying software on site with different security requirements etc. When talking about configuration, we've had to hide lots of ours in a back-end database because security and network people on-site were trying to change things in configuration files without understanding it. Keeping the configuration of the interfaces in code rather than moving to explicitly defined interfaces in XML, which can be published and consumed by almost anything. I know we can export the XML from the assembley, but it's full of rubbish and certain code generators choke on it. I know the world moves on, I've moved on a number of times over the last (ahem 22 years I've been developing) and am actively using WCF, so don't get me wrong, I do understand what it's for and where it's heading. I just think there should be simplier configuration/deployment options available, easier set-up and better management for configuration (SQL config provider maybe, rahter than just the web.config/app.config files). OK, back to the daily grid. Thanks for all your replies so far. Kind Regards Noel

  Read the article

• Can I create a custom roleprovider through a WCF service?

  - by RJ

  I have a web application that accesses a database through a wcf service. The idea is to abstract the data from the web application using the wcf service. All that works fine but I am also using the built in roleprovider using the SqlRoleManager which does access the aspnetdb database directly. I would like to abstract the roleprovider by creating a custom roleprovider in a wcf service and then accessing it through the wcf service. I have created the custom role provider and it works fine but now I need to place it in a wcf service. So before I jump headlong into trying to get this to work through the WCF service, I created a second class in the web application that accessed the roleprovider class and changed my web config roleprovider parameters to use that class. So my roleprovider class is called, "UcfCstRoleProvider" and my web.config looks like this: <roleManager enabled="true" defaultProvider="UcfCstRoleProvider"> <providers> <add name="UcfCstRoleProvider" type="Ucf.Security.Wcf.WebTests.UcfCstRoleProvider, Ucf.Security.Wcf.WebTests" connectionStringName="SqlRoleManagerConnection" applicationName="SMTP" /> </providers> </roleManager> My class starts like this: public class UcfCstRoleProvider : RoleProvider { private readonly WindowsTokenRoleProvider _roleProxy = new WindowsTokenRoleProvider(); public override string ApplicationName { get { return _roleProxy.ApplicationName; } set { _roleProxy.ApplicationName = value; } } As I said, this works fine. So the second class is called BlRoleProvider that has identical properties and parameters as the roleprovide but does not implement RoleProvider. I changed the web.config to point to this class like this: <roleManager enabled="true" defaultProvider="BlRoleProvider"> <providers> <add name="UcfCstRoleProvider" type="Ucf.Security.Wcf.WebTests.BlRoleProvider, Ucf.Security.Wcf.WebTests" connectionStringName="SqlRoleManagerConnection" applicationName="SMTP" /> </providers> </roleManager> But I get this error. "Provider must implement the class 'System.Web.Security.RoleProvider'." I hope I have explained well enough to show what I am trying to do. If I can get the roleprovider to work through another class in the same application, I am sure it will work through the WCF service but how do I get past this error? Or maybe I took a wrong turn and there is a better way to do what I want to do??

  Read the article

• ActiveMQ 5.2.0 + REST + HTTP POST = java.lang.OutOfMemoryError

  - by Bruce Loth

  First off, I am a newbie when it comes to JMS & ActiveMQ. I have been looking into a messaging solution to serve as middleware for a message producer that will insert XML messages into a queue via HTTP POST. The producer is an existing system written in C++ that cannot be modified (so Java and the C++ API are out). Using the "demo" examples and some trial and error, I have cobbled together a working example of what I want to do (on a windows box). The web.xml I configured in a test directory under "webapps" specifies that the HTTP POST messages received from the producer are to be handled by the MessageServlet. I added a line for the text app in "activemq.xml" ('ow' is the test app dir): I created a test script to "insert" messages into the queue which works well. The problem I am running into is that it as I continue to insert messages via REST/HTTP POST, the memory consumption and thread count used by ActiveMQ continues to rise (It happens when I have timely consumers as well as slow or non-existent consumers). When memory consumption gets around 250MB's and the thread count exceeds 5000 (as shown in windows task manager), ActiveMQ crashes and I see this in the log: Exception in thread "ActiveMQ Transport Initiator: vm://localhost#3564" java.lang.OutOfMemoryError: unable to create new native thread It is as if Jetty is spawning a new thread to handle each HTTP POST and the thread never dies. I did look at this page: http://activemq.apache.org/javalangoutofmemory.html and tried but that didn't fix the problem (although I didn't fully understand the implications of the change either). Does anyone have any ideas? Thanks! Bruce Loth PS - I included the "test message producer" python script below for what it is worth. I created batches of 100 messages and continued to run the script manually from the command line while watching the memory consumption and thread count of ActiveMQ in task manager. def foo(): import httplib, urllib body = "<?xml version='1.0' encoding='UTF-8'?>\n \ <ROOT>\n \ [snip: xml deleted to save space] </ROOT>" headers = {"content-type": "text/xml", "content-length": str(len(body))} conn = httplib.HTTPConnection("127.0.0.1:8161") conn.request("POST", "/ow/message/RDRCP_Inbox?type=queue", body, headers) response = conn.getresponse() print response.status, response.reason data = response.read() conn.close() ## end method definition ## Begin test code count = 0; while(count < 100): # Test with batches of 100 msgs count += 1 foo()

  Read the article

• How to Add an Attachment to a User Story using Rally REST .NET

  - by user1373451

  We're in the process of porting our .NET Rally code from SOAP to the REST .NET API. One thing I'm looking to replicate is the ability to upload attachments. I'm following a very similar procedure as to the one outlined in this posting: Rally SOAP API - How do I add an attachment to a Hierarchical Requirement Whereby the image is read into a System.Drawing.Image. We use the ImageToBase64 function to convert the image to a byte array which then gets assigned to the AttachmentContent, which is created first. Then, the Attachment gets created, and wired up to both AttachmentContent, and the HierarchicalRequirement. All of the creation events work great. A new attachment called "Image.png" gets created on the Story. However, when I download the resulting attachment from Rally, Image.png has zero bytes! I've tried this with different images, JPEG's, PNG's, etc. all with the same results. An excerpt of the code showing the process is included below. Is there something obvious that I'm missing? Thanks in advance. // .... Read content into a System.Drawing.Image.... // Convert Image to Base64 format byte[] imageBase64Format = ImageToBase64(imageObject, System.Drawing.Imaging.ImageFormat.Png); var imageLength = imageBase64Format.Length; // AttachmentContent DynamicJsonObject attachmentContent = new DynamicJsonObject(); attachmentContent["Content"] = imageBase64Format; CreateResult cr = restApi.Create("AttachmentContent", myAttachmentContent); String contentRef = cr.Reference; Console.WriteLine("Created: " + contentRef); // Tee up attachment DynamicJsonObject newAttachment = new DynamicJsonObject(); newAttachment["Artifact"] = story; newAttachment["Content"] = attachmentContent; newAttachment["Name"] = "Image.png"; newAttachment["ContentType"] = "image/png"; newAttachment["Size"] = imageLength; newAttachment["User"] = user; cr = restApi.Create("Attachment", newAttachment); String attachRef = attachRef.Reference; Console.WriteLine("Created: " + attachRef); } public static byte[] ImageToBase64(Image image, System.Drawing.Imaging.ImageFormat format) { using (MemoryStream ms = new MemoryStream()) { image.Save(ms, format); // Convert Image to byte[] byte[] imageBytes = ms.ToArray(); return imageBytes; } }

  Read the article

• Rest API Web Service - iOS

  - by zeekerg

  Its my first time to use web service in iOS. REST was my first choice and I use code igniter to form it. I have my Controller: require APPPATH.'/libraries/REST_Controller.php'; class Sample extends REST_Controller { function example_get() { $this->load->helper('arh'); $this->load->model('users'); $users_array = array(); $users = $this->users->get_all_users(); foreach($users as $user){ $new_array = array( 'id'=>$user->id , 'name'=>$user->name, 'age'=>$user->age, ); array_push( $users_array, $new_array); } $data['users'] = $users_array; if($data) { $this->response($data, 200); } } function user_put() { $this->load->model('users'); $this->users->insertAUser(); $message = array('message' => 'ADDED!'); $this->response($message, 200); } } , using my web browser, accessing the URL http://localhost:8888/restApi/index.php/sample/example/format/json really works fine and gives this output: {"users":[{"id":"1","name":"Porcopio","age":"99"},{"id":"2","name":"Name1","age":"24"},{"id":"3","name":"Porcopio","age":"99"},{"id":"4","name":"Porcopio","age":"99"},{"id":"5","name":"Luna","age":"99"}]} , this gives me a great output using RKRequest by RestKit in my app. The problem goes with the put method. This URL : http://localhost:8888/restApi/index.php/sample/user always give me an error like this: This XML file does not appear to have any style information associated with it. The document tree is shown below. <xml> <status/> <error>Unknown method.</error> This is my Users model <?php class Users extends CI_Model { function __construct() { parent::__construct(); } function get_all_users() { $this->load->database(); $query = $this->db->get('users'); return $query->result(); } function insertAUser(){ $this->load->database(); $data = array('name'=> "Sample Name", 'age'=>"99"); $this->db->insert('users', $data); } } ?> What is the work around for my _put method why am I not inserting anything? Thanks all!

  Read the article

• REST web service keeps first POST parametrs

  - by Diego

  I have a web service in REST, designed with Java and deployed on Tomcat. This is the web service structure: @Path("Personas") public class Personas { @Context private UriInfo context; /** * Creates a new instance of ServiceResource */ public Personas() { } @GET @Produces("text/html") public String consultarEdad (@QueryParam("nombre") String nombre) { ConectorCliente c = new ConectorCliente("root", "cafe.sql", "test"); int edad = c.consultarEdad(nombre); if (edad == Integer.MIN_VALUE) return "-1"; return String.valueOf(edad); } @POST @Produces("text/html") public String insertarPersona(@QueryParam("nombre") String msg, @QueryParam("edad") int edad) { ConectorCliente c = new ConectorCliente("usr", "passwd", "dbname"); c.agregar(msg, edad); return "listo"; } } Where ConectorCliente class is MySQL connector and querying class. So, I had tested this with the @GET actually doing POST work, any user inputed data and information from ma Java FX app and it went direct to webservice's database. However, I changed so the CREATE operation was performed through a webservice responding to an actual POST HTTP request. However, when I run the client and add some info, parameters go OK, but in next time I input different parameters it'll input the same. I run this several times and I can't get the reason of it. This is the clients code: public class WebServicePersonasConsumer { private WebTarget webTarget; private Client client; private static final String BASE_URI = "http://localhost:8080/GetSomeRest/serviciosweb/"; public WebServicePersonasConsumer() { client = javax.ws.rs.client.ClientBuilder.newClient(); webTarget = client.target(BASE_URI).path("Personas"); } public <T> T insertarPersona(Class<T> responseType, String nombre, String edad) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre", "edad"}; String[] queryParamValues = new String[]{nombre, edad}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request().post(null, responseType); } public <T> T consultarEdad(Class<T> responseType, String nombre) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre"}; String[] queryParamValues = new String[]{nombre}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request(javax.ws.rs.core.MediaType.TEXT_HTML).get(responseType); } private Form getQueryOrFormParams(String[] paramNames, String[] paramValues) { Form form = new javax.ws.rs.core.Form(); for (int i = 0; i < paramNames.length; i++) { if (paramValues[i] != null) { form = form.param(paramNames[i], paramValues[i]); } } return form; } public void close() { client.close(); } } And this this the code when I perform the operations in a Java FX app: String nombre = nombreTextField.getText(); String edad = edadTextField.getText(); String insertToDatabase = consumidor.insertarPersona(String.class, nombre, edad); So, as parameters are taken from TextFields, is quite odd why second, third, fourth and so on POSTS post the SAME.

  Read the article

• Silverlight WCF serialization DataContract(IsReference=true) problem

  - by Ciaran

  Hi, I'm have a Silverlight 3 UI that access WCF services which in turn access respositories that use NHibernate. To overcome some NHibernate lazy loading issues with WCF I'm using my own DataContract surrogate as described here: http://timvasil.com/blog14/post/2008/02/WCF-serialization-with-NHibernate.aspx. In here I'm setting preserveObjectReferences = true My model contains cycles (i.e. Customer with IList[Order]) When I retrieve an object from my service it works fine, however when I try and send that same object back to the wcf service I get the error: System.ServiceModel.CommunicationException was unhandled by user code Message=There was an error while trying to serialize parameter http://tempuri.org/:searchCriteria. The InnerException message was 'Object graph ...' contains cycles and cannot be serialized if references are not tracked. Consider using the DataContractAttribute with the IsReference property set to true.' So cyclical references are now a problem in Silverlight, so I try change my DataContract to be [DataContract(IsReference=true)] but now when I try to retrieve an object from my service I get the following exception: System.ExecutionEngineException was unhandled Message=Exception of type 'System.ExecutionEngineException' was thrown. InnerException: Any ideas?

  Read the article

• Silverlight WCF serialization [DataContract(IsReference=true)] problem

  - by Ciaran

  Hi, I'm have a Silverlight 3 UI that access WCF services which in turn access respositories that use NHibernate. To overcome some NHibernate lazy loading issues with WCF I'm using my own DataContract surrogate as described here: http://timvasil.com/blog14/post/2008/02/WCF-serialization-with-NHibernate.aspx. In here I'm setting preserveObjectReferences = true My model contains cycles (i.e. Customer with Collection). When I retrieve an object from my service it works fine, however when I try and send that same object back to the wcf service I get the error: System.ServiceModel.CommunicationException was unhandled by user code Message=There was an error while trying to serialize parameter http://tempuri.org/:searchCriteria. The InnerException message was 'Object graph ...' contains cycles and cannot be serialized if references are not tracked. Consider using the DataContractAttribute with the IsReference property set to true.' So cyclical references are now a problem in Silverlight, so I try change my DataContract to be [DataContract(IsReference=true)] but now when I try to retrieve an object from my service I get the following exception: System.ServiceModel.CommunicationException was unhandled by user code Message=The remote server returned an error: NotFound. It shouldn't be this hard to do something so trivial...

  Read the article

• Developer certificate vs purchased certificate for WCF

  - by RemotecUk

  I understsand that if I want to use authentication in WCF then I need to install a certificate on my server which WCF will use to encrypt data passing between my server and client. For development purposes I believe I can use the makecert.exe util. to make a development certificate. What is the worst that can happen if I use this certificate on the production environment? and... Why cant I use this certificate on the production environment? and ... What is the certificate actually going to do in this scenario? [Edit: Added another question] finally... In a scenario where the website has a certificate installed to provide HTTPS support can the same certificate be used for the WCF services as well? Note on my application: Its a NetTCP client and server service. The users will log in using the same username and password which they use for the website which is passed in clear text. I would be happy to pass the u/n + p/w in cleartext to WCF but this isnt allowed by the framework and a certificate must be in place. However, I dont want to buy an certificate due to budget constraints! (Sorry for the possibly stupid question but I really dont understand this so would welcome some help with this).

  Read the article

• WCF NetTcpBinding Security - how does it work?

  - by RemotecUk

  Hi, encountered the following problems trying to work through the quagmire of settings in WCF... I created a WCF client server service using a NetTcp binding. I didn't make any changes to the security settings and when running on one machine it works very nicely. However, when I ran my client from another machine it complained that the server didnt like the security credentials that were sent. I understand now that NetTCP is "secured" by default and that my client would have been passing the wrong security details - namely the windows user name and password (or some form of domain authentication) to my server which as they are not running on the same domain it would not have liked. However, what I don't understand is as follows: I haven't specified any security in my binding - does the standard settings expect a windows user name or password to be sent? I don't have any certificate installed on my server - I understand that NetTCP bindings need some form of public private key to protect the credentials - yet this seemed to work when both client and server were on the same machine - how was the data getting encrypted? Or wants it as WCF knew it was on the same machine and encryption isn't needed? I have had to set my security mode on my client and server to "none" now and they connect nicely. However is there any way to encrypt my data without a certificate? Finally... what is the difference between Transport and Message security? To check my understanding (excuse the scenario!) message security is like if I sent a letter from person A to person B and I encode my hand writing to ensure that if anyone intercepts it they cannot read it? Transport Security is if I decide to have my letter sent by armed transport so that no one can get at it along the way? Is it possible to have any form of encryption in WCF without a certificate? My project is a private project and I dont want to purchase a certificate and the data isnt that sensitive anyway so its just for my own knowledge. Thanks in advance.

  Read the article

• WCF RIA Silverlight deployment issues

  - by Handleman

  It seems the world is awash with people having problems deploying RIA WCF services, and now I'm one too. I've already tried a bunch of things, but to no avail. I need WCF RIA to support a Silverlight 3 application I've built. The short story is, using the new WCF RIA services (Nov 09?) I open VS 2008, create new project (silverlight application), enabling ".NET RIA services". Add new item to web project - Linq2SQL dbml file (from SQL 2005 DB prepared earlier) and compile. I add a new item to the web project - domain service (link the tables I need) and compiled. Using the domain context I "Load" data with a standard RIA get query in the MainPage and add a TextBlock to display returned data. Build & run (cassini) - success. Using VS to publish to IIS on local PC - success. Using VS to publish to test server (IIS6) - browse to location and the Silverlight app loads but Fiddler tells me I've got a 404 on all the the WCF .svc requests. Use Fiddler to "launch IE" on the service request and it's true - 404. I have already run aspnet_regiis, ServiceModelReg and added mime types for .xap, .xaml, .xbap and .svc. I have included the System.Web.Ria and System.Web.DomainServices DLL with copy local true. I need help with either a) a solution b) an approach to find a solution

  Read the article

• xsd.exe - schema to class - for use with WCF

  - by NealWalters

  I have created a schema as an agreed upon interface between our company and an external company. I am now creating a WCF C# web service to handle the interface. I ran the XSD utility and it created a C# class. The schema was built in BizTalk, and references other schemas, so all-in-all there are over 15 classes being generated. I put [DataContract} attribute in front of each of the classes. Do I have to put the [DataMember] attribute on every single property? When I generate a test client program, the proxy does not have any code for any of these 15 classes. We used to use this technique when using .asmx services, but not sure if it will work the same with WCF. If we change the schema, we would want to regenerate the WCF class, and then we would haev to each time redecorate it with all the [DataMember] attributes? Is there an newer tool similar to XSD.exe that will work better with WCF? Thanks, Neal Walters SOLUTION (buried in one of Saunders answer/comments): Add the XmlSerializerFormat to the Interface definition: [OperationContract] [XmlSerializerFormat] // ADD THIS LINE Transaction SubmitTransaction(Transaction transactionIn); Two notes: 1) After I did this, I saw a lot more .xsds in the my proxy (Service Reference) test client program, but I didn't see the new classes in my intellisense. 2) For some reason, until I did a build on the project, I didn't get all the classes in the intellisense (not sure why).

  Read the article

• Relay WCF Service

  - by Matt Ruwe

  This is more of an architectural and security question than anything else. I'm trying to determine if a suggested architecture is necessary. Let me explain my configuration. We have a standard DMZ established that essentially has two firewalls. One that's external facing and the other that connects to the internal LAN. The following describes where each application tier is currently running. Outside the firewall: Silverlight Application In the DMZ: WCF Service (Business Logic & Data Access Layer) Inside the LAN: Database I'm receiving input that the architecture is not correct. Specifically, it has been suggested that because "a web server is easily hacked" that we should place a relay server inside the DMZ that communicates with another WCF service inside the LAN which will then communicate with the database. The external firewall is currently configured to only allow port 443 (https) to the WCF service. The internal firewall is configured to allow SQL connections from the WCF service in the DMZ. Ignoring the obvious performance implications, I don't see the security benefit either. I'm going to reserve my judgement of this suggestion to avoid polluting the answers with my bias. Any input is appreciated. Thanks, Matt

  Read the article

• IIS6 configuration for WCF/Silverlight

  - by Grayson Mitchell

  I am trying the simple senario of running a WCF service to return Active directory information on a user. (http://rouslan.com/2009/03/20-steps-to-get-together-windows-authentication-silverlight-and-wcf-service/) using Silverlight 4 & .net 4 However, I am being driven insane by trying to set this up in IIS. Currently I have my solution working in VS, but when I try to run the service in ISS a debug window tries to open... (and I can't get rid of it, is is complaining about the WCF call). <basicHttpBinding> <binding name="winAuthBasicHttpBinding"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm"/> </security> </binding> </basicHttpBinding> The Insanity: I have got the IIS to successfully call a WCF service (but can't reproduce), I have created 5 projects to try and get this working, but in my 5th I can't even browse the site (says it can't download silverlight application, but mime type are setup). My next step is to install Server2008 on a test machine and try IIS7... as all the various walkthrough's I have found just dont seem to work in IIS6.

  Read the article

• Connecting to a self hosted WCF service from a Flex application - policy issues

  - by James S

  Hello, I am trying to accomplish the following: I wrote a Flex application that is trying to connect to a WCF service hosted on the clients computer. I also wrote a windows forms application for the client to run. This application exposes a self-hosted WCF service that the Flex application is supposed to connect to. This works fine if I'm loading the Flex application from my local IIS. The problem starts when the Flex application is hosted on a different domain. When this occurs, the flash player requires a crossdomain.xml policy file on the clients computer. I also managed to expose the crossdomain.xml on the clients computer using another WCF self-hosted service and WebHttpBinding on the clients computer. This also works fine. My problem is that the flash player requires that the crossdomain.xml or a meta policy file will be in the root directory of the domain. If I used my WCF service to expose something on the root directory of the clients computer I will run over any existing web server capabilities the client has on the computer (such as IIS). I know it's a bit complicated scenario, but any help would be appreciated. Thanks!

  Read the article

• A simple WCF Service (POX) without complex serialization

  - by jammer59

  I'm a complete WCF novice. I'm trying to build a deploy a very, very simple IIS 7.0 hosted web service. For reasons outside of my control it must be WCF and not ASMX. It's a wrapper service for a pre-existing web application that simply does the following: 1) Receives a POST request with the request body XML-encapsulated form elements. Something like valuevalue. This is untyped XML and the XML is atomic (a form) and not a list of records/objects. 2) Add a couple of tags to the request XML and the invoke another HTTP-based service with a simple POST + bare XML -- this will actually be added by some internal SQL ops but that isn't the issue. 3) Receive the XML response from the 3rd party service and relay it as the response to the original calling client in Step 1. The clients (step 1) will be some sort of web-based scripting but could be anything .aspx, python, php, etc. I can't have SOAP and the usual WCF-based REST examples with their contracts and serialization have me confused. This seems like a very common and very simple problem conceptually. It would be easy to implement in code but IIS-hosted WCF is a requirement. Any pointers?

  Read the article

• RestSharp post object to WCF

  - by steve

  Im having an issue posting an object to my wcf rest webservice. On the WCF side I have the following: [WebInvoke(UriTemplate = "", Method = "POST")] public void Create(myObject object) { //save some stuff to the db } When im debugging this never gets hit - it does however get hit when I remove the parameter so im guessing ive done something wrong on the restSharp side of things. Heres my code for that part: var client = new RestClient(ApiBaseUri); var request = new RestRequest(Method.POST); request.RequestFormat = DataFormat.Xml; request.AddBody(myObject); var response = client.Execute(request); Am I doing this wrong? How can the WCF side see my object? What way should I be making the reqest? Or should I be handling it differently WCF side? Things ive tried: request.AddObject(myObject); and request.AddBody(request.XmlSerialise.serialise(myObject)); Any help and understanding in what could possibly be wrong would be much appreciated. Thanks.

  Read the article

• Publishing a WCF Server and client and their endpoints

  - by Ahmadreza

  Imagine developing a WCF solution with two projects (WCF Service/ and web application as WCF Client). As long as I'm developing these two projects in visual studio and referencing service to client (Web Application) as server reference there is no problem. Visual studio automatically assign a port for WCF server and configure all needed configuration including Server And Client binging to something like this in server: <service behaviorConfiguration="DefaultServiceBehavior" name="MYWCFProject.MyService"> <endpoint address="" binding="wsHttpBinding" contract="MYWCFProject.IMyService"> <identity> <dns value="localhost" /> </identity> </endpoint> <host> <baseAddresses> <add baseAddress="http://localhost:8731/MyService.svc" /> </baseAddresses> </host> </service> and in client: <client> <endpoint address="http://localhost:8731/MyService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IMyService" contract="MyWCFProject.IMyService" name="WSHttpBinding_IMyService"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> The problem is I want to frequently publish this two project in two different servers as my production servers and Service url will be "http://mywcfdomain/MyService.svc". I don't want to change config file every time I publish my server project. The question is: is there any feature in Visual Studio 2008 to automatically change the URLs or I have to define two different endpoints and I set them within my code (based on a parameter in my configuration for example Development/Published).

  Read the article

• WCF cross-domain policy security error

  - by George2

  Hello everyone, I am using VSTS 2008 + C# + WCF + .Net 3.5 + Silverlight 3.0. I host Silverlight control in an html page and debug it from VSTS 2008 (press F5, then run in VSTS 2008 built-in ASP.Net development web server), then call another WCF service (hosted in another machine running IIS 7.0 + Vista). The WCF service is very simple, just return a constant string to client. When invoking the WCF service from Silverlight, I got the following error message, An error occurred while trying to make a request to URI 'https://LabTest/Test.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. Here is the clientaccesspolicy.xml file, anything wrong? <?xml version="1.0" encoding="utf-8" ?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*"> </domain> </allow-from> <grant-to> <resource path="/" include-subpaths="true"></resource> </grant-to> </policy> </cross-domain-access> </access-policy> thanks in advance, George

  Read the article

• How to define a batching routing service in WCF

  - by mattx

  I have designed a custom silverlight wcf channel that I want to leverage to selectively batch calls from the client to the server and possibly to cache on the client and short circuit calls. So far I'm just using this channel as a transport and sending the generic WCF messages that result to the WCF router service example here http://msdn.microsoft.com/en-us/magazine/cc500646.aspx?pr=blog to prototype this on the server side. So my scenario looks like this: IFooClient-MyTransportChannel-IRouterService-IFooService-Return I now need to be able to send more than one message per call through the router and carve them up and service them on the server side. Since this is just an experiment and I'm taking baby steps I will dispatch and service all the messages right away on the server side and return the batch of results. Immediately I noticed that simply making the router interface take Message[] instead of Message doesn't work due to serialization problems. I guess this makes sense. I'm not sure soap envelopes can contain other soap envelopes etc. Is there a simple way to take a collection of WCF Message objects and send them to a single method on a service where they can be split up and forwarded as appropriate? If not I'd love suggestions on how I should approach this. I want to have minimal work to do on the router service side so the goal should be to get as close to being able to "slice and forward" as possible.

  Read the article

• WCF data services (OData), query with inheritance limitation?

  - by Mathieu Hétu

  Project: WCF Data service using internally EF4 CTP5 Code-First approach. I configured entities with inheritance (TPH). See previous question on this topic: Previous question about multiple entities- same table The mapping works well, and unit test over EF4 confirms that queries runs smoothly. My entities looks like this: ContactBase (abstract) Customer (inherits from ContactBase), this entity has also several Navigation properties toward other entities Resource (inherits from ContactBase) I have configured a discriminator, so both Customer and Resource map to the same table. Again, everythings works fine on the Ef4 point of view (unit tests all greens!) However, when exposing this DBContext over WCF Data services, I get: - CustomerBases sets exposed (Customers and Resources sets seems hidden, is it by design?) - When I query over Odata on Customers, I get this error: Navigation Properties are not supported on derived entity types. Entity Set 'ContactBases' has a instance of type 'CodeFirstNamespace.Customer', which is an derived entity type and has navigation properties. Please remove all the navigation properties from type 'CodeFirstNamespace.Customer'. Stacktrace: at System.Data.Services.Serializers.SyndicationSerializer.WriteObjectProperties(IExpandedResult expanded, Object customObject, ResourceType resourceType, Uri absoluteUri, String relativeUri, SyndicationItem item, DictionaryContent content, EpmSourcePathSegment currentSourceRoot) at System.Data.Services.Serializers.SyndicationSerializer.WriteEntryElement(IExpandedResult expanded, Object element, ResourceType expectedType, Uri absoluteUri, String relativeUri, SyndicationItem target) at System.Data.Services.Serializers.SyndicationSerializer.<DeferredFeedItems>d__b.MoveNext() at System.ServiceModel.Syndication.Atom10FeedFormatter.WriteItems(XmlWriter writer, IEnumerable`1 items, Uri feedBaseUri) at System.ServiceModel.Syndication.Atom10FeedFormatter.WriteFeedTo(XmlWriter writer, SyndicationFeed feed, Boolean isSourceFeed) at System.ServiceModel.Syndication.Atom10FeedFormatter.WriteFeed(XmlWriter writer) at System.ServiceModel.Syndication.Atom10FeedFormatter.WriteTo(XmlWriter writer) at System.Data.Services.Serializers.SyndicationSerializer.WriteTopLevelElements(IExpandedResult expanded, IEnumerator elements, Boolean hasMoved) at System.Data.Services.Serializers.Serializer.WriteRequest(IEnumerator queryResults, Boolean hasMoved) at System.Data.Services.ResponseBodyWriter.Write(Stream stream) Seems like a limitation of WCF Data services... is it? Not much documentation can be found on the web about WCF Data services (OData) and inheritance specifications. How can I overpass this exception? I need these navigation properties on derived entities, and inheritance seems the only way to provide mapping of 2 entites on the same table with Ef4 CTP5... Any thoughts?

  Read the article

• Host WCF in MVC2 Site

  - by Basiclife

  Hi, We've got a very large, complex MVC2 website. We want to add an API for some internal tools and decided to use WCF. Ideally, we want MVC itself to host the WCF service. Reasons include: Although there's multiple tiers to the application, some functionality we'd like in the API requires the website itself (e.g. formatting emails). We use TFS to auto-build (continuous integration) and deploy - The less we need to modify the build and release mechanism the better We use the Unity container and Inversion of Control throughout the application. Being part of the Website would allow us to re-use configuration classes and other helper methods. I've written a custom ServiceBehavior which in turn has a custom InstanceProvider - This allows me to instantiate and configure a container which is then used to service all requests for class instances from WCF. So my question is; Is it possible to host a WCF service from within MVC itself? I've only had experience in Services / Standard Asp.Net websites before and didn't realise MVC2 might be different until I actually tried to wire it into the config and nothing happened. After some googling, there don't seem to be many references to doing this - so thought I'd ask here.

  Read the article

• Common methods/implementation across multiple WCF Services

  - by Rob

  I'm looking at implementing some WCF Services as part of an API for 3rd parties to access data within a product I work on. There are currently a set of services exposed as "classic" .net Web Services and I need to emulate the behaviour of these, at least in part. The existing services all have an AcquireAuthenticationToken method that takes a set of parameters (username, password, etc) and return a session token (represented as a GUID), which is then passed in on calls to any other method (There's also a ReleaseAuthenticationToken method, no guesses needed as to what that does!). What I want to do is implement multiple WCF services, such as: ProductData UserData and have both of these services share a common implementation of Acquire/Release. From the base project that is created by VS2k8, it would appear I will start with, per service: public class ServiceName : IServiceName { } public interface IServiceName { } Therefore my questions would be: Will WCF tolerate me adding a base class to this, public class ServiceName : ServiceBase, IServiceName, or does the fact that there's an interface involved mean that won't work? If "No it won't work" to Question 1, could I change IServiceName so it extends another interface, IServiceBase, thus forcing the presence of Acquire/Release methods, but then having to supply the implementation in each service. Are 1 and 2 both really bad ideas and there's actually a much better solution that, knowing next to nothing about WCF, I just haven't thought of?

  Read the article

• REST WCF service locks thread when called using AJAX in an ASP.Net site

  - by Jupaol

  I have a WCF REST service consumed in an ASP.Net site, from a page, using AJAX. I want to be able to call methods from my service async, which means I will have callback handlers in my javascript code and when the methods finish, the output will be updated. The methods should run in different threads, because each method will take different time to complete their task I have the code semi-working, but something strange is happening because the first time I execute the code after compiling, it works, running each call in a different threads but subsequent calls blocs the service, in such a way that each method call has to wait until the last call ends in order to execute the next one. And they are running on the same thread. I have had the same problem before when I was using Page Methods, and I solved it by disabling the session in the page but I have not figured it out how to do the same when consuming WCF REST services Note: Methods complete time (running them async should take only 7 sec and the result should be: Execute1 - Execute3 - Execute2) Execute1 -- 2 sec Execute2 -- 7 sec Execute3 -- 4 sec Output After compiling Output subsequent calls (this is the problem) I will post the code...I'll try to simplify it as much as I can Service Contract [ServiceContract( SessionMode = SessionMode.NotAllowed )] public interface IMyService { // I have other 3 methods like these: Execute2 and Execute3 [OperationContract] [WebInvoke( RequestFormat = WebMessageFormat.Json, ResponseFormat = WebMessageFormat.Json, UriTemplate = "/Execute1", Method = "POST")] string Execute1(string param); } [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior( InstanceContextMode = InstanceContextMode.PerCall )] public class MyService : IMyService { // I have other 3 methods like these: Execute2 (7 sec) and Execute3(4 sec) public string Execute1(string param) { var t = Observable.Start(() => Thread.Sleep(2000), Scheduler.NewThread); t.First(); return string.Format("Execute1 on: {0} count: {1} at: {2} thread: {3}", param, "0", DateTime.Now.ToString(), Thread.CurrentThread.ManagedThreadId.ToString()); } } ASPX page <%@ Page EnableSessionState="False" Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="RestService._Default" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> <script type="text/javascript"> function callMethodAsync(url, data) { $("#message").append("<br/>" + new Date()); $.ajax({ cache: false, type: "POST", async: true, url: url, data: '"de"', contentType: "application/json", dataType: "json", success: function (msg) { $("#message").append("<br/>&nbsp;&nbsp;&nbsp;" + msg); }, error: function (xhr) { alert(xhr.responseText); } }); } $(function () { $("#callMany").click(function () { $("#message").html(""); callMethodAsync("/Execute1", "hello"); callMethodAsync("/Execute2", "crazy"); callMethodAsync("/Execute3", "world"); }); }); </script> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <input type="button" id="callMany" value="Post Many" /> <div id="message"> </div> </asp:Content> Web.config (relevant) <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> Global.asax void Application_Start(object sender, EventArgs e) { RouteTable.Routes.Ignore("{resource}.axd/{*pathInfo}"); RouteTable.Routes.Add(new ServiceRoute("", new WebServiceHostFactory(), typeof(MyService))); }

  Read the article

• The server rejected the session-establishment request: WCF hosted on IIS

  - by Dave Hanna

  Background: I'm working on a project where we have about a dozen distinct WCF services implemented in an IIS application, communicating over net.tcp on the default port (808), using the Microsoft Net.Tcp Port Sharing Service. I recently added a self-test method to the base class of each of these services so that I could remotely hit the service and get back a status string verifying that it was in operation. We implement this app in a ladder of environments - Development, QA, UAT, and finally production. My problem: My test program, which instantiates a connection to each service in turn and invokes the self-test method, works fine on all the environments below production. We recently moved the app to production, and I'm getting a weird error that I can't explain: On the first of the services that I hit, I get back an exception: "The server at [URL] rejected the session-establishment request". All the other services respond fine. I initially thought there was something wrong with the particular service that was failing, but I tried rearranging the list of services into a different order, and it SEEMS to always be the first service that I hit that fails. (I say SEEMS because it think once in the early iterations of testing, I saw it happen on the second service that it hit. But I haven't been able to reproduce that.) I've looked at application startup delays, and that doesn't seem to be the problem, because I can come back and run the test again as soon as it finishes - a delay of only a minute or two - and get the same error. Also, in the lower level environments, there is a start up delay of probably 30 seconds to a minute, but the result still comes back as expected. I've tried accessing the services over http from INetManager, and I get intermittent failures on all the services - a particular service will return a yellow screen of death on on invocation, then come up with the expected link to the WSDL on the next one seconds later. I'm completely at a loss to explain this behavior, or how to resolve it. I've googled the error message, and not found anything helpful. It may be a configuration issue - the production servers are newly provisioned VM's, and we may not have the config exactly right (whereas all the lower level environments have been running this and other similar apps for some time), but I have not idea what to look for. I've looked at the properties of the app pool that the app is running on and compared it to the lower level environments without finding any differences. If somebody can point me in the right direction, you would have my undying gratitude.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >