Search Results

Search found 8552 results on 343 pages for '14 04'.

Page 240/343 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• dpkg crashing while trying to install a package

  - by Jonathan

  While attempting to install a package via apt-get the following. The first error I get is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. And, if I run that command the box spins out of control and I get the following in /var/log/syslog Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398546] ------------[ cut here ]------------ Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398552] WARNING: at /build/buildd/linux-3.0.0/arch/x86/xen/multicalls.c:182 xen_mc_flush+01c0() Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398561] Modules linked in: acpiphp Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398568] Pid: 31063, comm: java Tainted: G D W 3.0.0-14-virtual #23-Ubuntu Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398576] Call Trace: Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398580] [<c0648265>] ? printk+0x2d/0x2f Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398586] [<c0150462>] warn_slowpath_common+0x72/0xa0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398593] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398599] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398605] [<c01504b2>] warn_slowpath_null+0x22/0x30 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398611] [<c0104883>] xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398617] [<c0104e7a>] ? xen_extend_mmu_update+0x4a/0x70 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398624] [<c0106565>] xen_set_pud_hyper+0x75/0x80 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398630] [<c01065b9>] xen_set_pud+0x49/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398636] [<c0132105>] pud_populate+0x45/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398642] [<c0208a24>] __pmd_alloc+0x74/0x90 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398648] [<c0208cb7>] handle_mm_fault+0x277/0x2c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398655] [<c065f45b>] do_page_fault+0x15b/0x4a0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020ba24>] ? remove_vma+0x44/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020d9b6>] ? sys_mmap_pgoff+0x106/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065f300>] ? vmalloc_fault+0x190/0x190 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065c79f>] error_code+0x67/0x6c Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] ---[ end trace 0b105e2a179ad013 ]---

  Read the article

• But what version is the database now?

  - by BuckWoody

  When you upgrade your system to SQL Server 2008 R2, you’ll know that the instance is at that version by using the standard commands like SELECT @@VERSION or EXEC xp_msver. My system came back with this info when I typed those: Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86)   Apr  2 2010 15:53:02   Copyright (c) Microsoft Corporation  Developer Edition on Windows NT 6.0 <X86> (Build 6002: Service Pack 2) (Hypervisor) Index Name Internal_Value Character_Value 1 ProductName NULL Microsoft SQL Server 2 ProductVersion 655410 10.50.1600.1 3 Language 1033 English (United States) 4 Platform NULL NT INTEL X86 5 Comments NULL SQL 6 CompanyName NULL Microsoft Corporation 7 FileDescription NULL SQL Server Windows NT 8 FileVersion NULL 2009.0100.1600.01 ((KJ_RTM).100402-1540 ) 9 InternalName NULL SQLSERVR 10 LegalCopyright NULL Microsoft Corp. All rights reserved. 11 LegalTrademarks NULL Microsoft SQL Server is a registered trademark of Microsoft Corporation. 12 OriginalFilename NULL SQLSERVR.EXE 13 PrivateBuild NULL NULL 14 SpecialBuild 104857601 NULL 15 WindowsVersion 393347078 6.0 (6002) 16 ProcessorCount 1 1 17 ProcessorActiveMask 1 1 18 ProcessorType 586 PROCESSOR_INTEL_PENTIUM 19 PhysicalMemory 2047 2047 (2146934784) 20 Product ID NULL NULL   But a database properties are separate from the Instance. After an upgrade, you always want to make sure that the compatibility options (which have much to do with how NULLs and other objects are treated) is at what you expect. For the most part, as long as the application can handle it, I set my compatibility levels to the latest version. For SQL Server 2008, that was “10.0” or “10”. You can do this with the ALTER DATABASE command or you can just right-click the database and select “Properties” and then “Database Options” in SQL Server Management Studio. To check the database compatibility level, I use this query: SELECT name, cmptlevel FROM sys.sysdatabases When I did that this morning I saw that the databases (all of them) were at 10.0 – not 10.5 like the Instance. That’s expected – we didn’t revise the database format up with the Instance for this particular release. Didn’t want to catch you by surprise on that. While your databases should be at the “proper” level for your situation, you can’t rely on the compatibility level to indicate the Instance level. More info on the ALTER DATABASE command in SQL Server 2008 R2 is here: http://technet.microsoft.com/en-us/library/bb510680(SQL.105).aspx Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

  - by jrosell

  Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

  Read the article

• Configurable tables in sql database

  - by dot

  I have the following tables in my database: Config Table: ====================================== Start_Range | End Range | Config_id 10 | 15 | 1 ====================================== Available_UserIDs ========================== ID | UserID | Used_YN | 1 | 10 | t | 1 | 11 | f | 1 | 12 | f | 1 | 13 | f | 1 | 14 | f | 1 | 15 | f | ========================== Users ========================== UserId | FName | LName | 10 |John | Doe | ========================== This is used in a reservation system of sorts... which lets an administrator specify a range of numbers that will be assigned to users in the config table. Once the range has been defined, the system then populates the Available_userIDs table with all the numbers in between the range, and sets the Used_YN flag to false As users sign up, they grab the next user_id number that's not in use... and reserve it. Then the system adds a record to the Users table. Once the admin has specified a range, it is possible that they can change it. For example, they can start with 10-15... and then when the range is used up, they should be able to specify another range like 16 - 99. I've put a unique constraint on the Available_UserIDs table, as well as on the Users table - to ensure that UserIds can't be duplicated. My questions are as follows: What's the best way to prevent the admins from using a range that's already in use? I thought of the following options: -- check either the Users table to see if the start range or ending range numbers are being used. If they are, assume that all the numbers in between are in use too, and reject the range. -- let them specify whatever they want, try to populate the Available_UserIDs table. If there are duplicates, just ignore that specific error message from the database and continue on. How do I find gaps in the number ranges? For example, if they specify 10-15, and then 20-25, it'd be nice to be able to somehow suggest on my web page that 16-19 is currently available. I found this article: http://stackoverflow.com/questions/1312101/how-to-find-a-gap-in-running-counter-with-sql But it only seems to return the first available number... so in my example above, it would only return the number 16. I'm sure there's a simpler way to do things that I'm overlooking!

  Read the article

• Business Intelligence goes Big Data

  - by Alliances & Channels Redaktion

  Big Data stellt die nächste große Herausforderung für die IT-Branche dar: Massen von Daten aus immer mehr Quellen – aus sozialen Netzwerken, Telekommunikations- und Weblogs, RFID-Lesern etc. – müssen logisch verknüpft, in Echtzeit integriert und verarbeitet werden. Doch wie sieht es mit der praktischen Umsetzung aus? Eine europaweite Studie von Steria Mummert Consulting zeigt: Lediglich 28 % der Unternehmen haben bereits heute eine übergreifende, abgestimmte Business-Intelligence-Strategie implementiert. Vorherrschend sind BI-Insellösungen, die schon jetzt an den Grenzen ihrer Kapazität arbeiten. Daten werden also bisher nur eingeschränkt als wertschöpfende Ressource genutzt! Das Ergebnis der Studie klingt erschreckend, doch Unternehmen können es zu Ihrem Vorteil nutzen: Wer jetzt das Thema Big Data anpackt, kann sich einen gewinnbringenden Vorsprung vor dem Wettbewerb sichern. Wie sieht die Analyse-Umgebung der Zukunft aus? Wie und wo kann Big Data für den Geschäftserfolg genutzt werden? Antworten darauf liefert die Kunden-Event Reihe von Oracle und dem Oracle Platinum Partner Steria Mummert Consulting: Hier werden Strategien entwickelt, wie Unternehmen mit Information Discovery ihr BI-Potenzial auf dem Weg zur Big Data Schritt für Schritt ausbauen können. Highlights aus München Durchweg positives Feedback haben wir aus München, der ersten Station der Eventreihe am 23.7., erhalten: Nicht nur die tolle Location, das "La Villa" im Bamberger Haus, überzeugte. Die 31 Teilnehmerinnen und Teilnehmer konnten auch inhaltlich eine Menge mitnehmen – unter anderem einen konkreten Vorschlag für ihre eigene Roadmap in Richtung Big Data. Die Ausgangsfrage des Tages lautete – einfach und umfassend zugleich: Wie können wir den Überblick in einer komplexen Welt behalten? Den Status quo in Europa für Business Intelligence präsentierte Steria Mummert Consulting entlang der Europäischen biMA®-Studie 2012/13. Anhand von Anwendungsbeispielen aus ihrer Praxis präsentierten die geladenen Experten von Oracle und Steria Mummert Consulting verschiedene Lösungsansätze. Eine sehr anschauliche Demo zu Endeca zeigte beispielsweise, wie einfach und flexibel ein Dashboard sein kann: Hier gibt es keine vordefinierten Reports, stattdessen können Entscheider die Filter einfach per Drag & Drop verändern und bekommen so einen individuell sturkturierten Überblick über ihre Daten. Einen Ausblick bot die Session zu Oracle Business Analytics für mobile Anwendungen und Real-Time Decisions. Fazit: eine gelungene Mischung aus Überblicks-Informationen und ganz konkreten Ideen für die spezifischen Anwendungsbereiche der Kunden. Die Eventreihe „BI goes Big Data“ macht im August in Hamburg und Frankfurt Station. Die kostenfreie Veranstaltung findet zusammen mit Steria Mummert Consulting statt und richtet sich an Endkunden. In Hamburg am 14.8.2013 – zur AnmeldungIn Frankfurt a.M. am 20.8.2013 – zur Anmeldung

  Read the article

• Business Intelligence goes Big Data

  - by Alliances & Channels Redaktion

  Big Data stellt die nächste große Herausforderung für die IT-Branche dar: Massen von Daten aus immer mehr Quellen – aus sozialen Netzwerken, Telekommunikations- und Weblogs, RFID-Lesern etc. – müssen logisch verknüpft, in Echtzeit integriert und verarbeitet werden. Doch wie sieht es mit der praktischen Umsetzung aus? Eine europaweite Studie von Steria Mummert Consulting zeigt: Lediglich 28 % der Unternehmen haben bereits heute eine übergreifende, abgestimmte Business-Intelligence-Strategie implementiert. Vorherrschend sind BI-Insellösungen, die schon jetzt an den Grenzen ihrer Kapazität arbeiten. Daten werden also bisher nur eingeschränkt als wertschöpfende Ressource genutzt! Das Ergebnis der Studie klingt erschreckend, doch Unternehmen können es zu Ihrem Vorteil nutzen: Wer jetzt das Thema Big Data anpackt, kann sich einen gewinnbringenden Vorsprung vor dem Wettbewerb sichern. Wie sieht die Analyse-Umgebung der Zukunft aus? Wie und wo kann Big Data für den Geschäftserfolg genutzt werden? Antworten darauf liefert die Kunden-Event Reihe von Oracle und dem Oracle Platinum Partner Steria Mummert Consulting: Hier werden Strategien entwickelt, wie Unternehmen mit Information Discovery ihr BI-Potenzial auf dem Weg zur Big Data Schritt für Schritt ausbauen können. Highlights aus München Durchweg positives Feedback haben wir aus München, der ersten Station der Eventreihe am 23.7., erhalten: Nicht nur die tolle Location, das "La Villa" im Bamberger Haus, überzeugte. Die 31 Teilnehmerinnen und Teilnehmer konnten auch inhaltlich eine Menge mitnehmen – unter anderem einen konkreten Vorschlag für ihre eigene Roadmap in Richtung Big Data. Die Ausgangsfrage des Tages lautete – einfach und umfassend zugleich: Wie können wir den Überblick in einer komplexen Welt behalten? Den Status quo in Europa für Business Intelligence präsentierte Steria Mummert Consulting entlang der Europäischen biMA®-Studie 2012/13. Anhand von Anwendungsbeispielen aus ihrer Praxis präsentierten die geladenen Experten von Oracle und Steria Mummert Consulting verschiedene Lösungsansätze. Eine sehr anschauliche Demo zu Endeca zeigte beispielsweise, wie einfach und flexibel ein Dashboard sein kann: Hier gibt es keine vordefinierten Reports, stattdessen können Entscheider die Filter einfach per Drag & Drop verändern und bekommen so einen individuell sturkturierten Überblick über ihre Daten. Einen Ausblick bot die Session zu Oracle Business Analytics für mobile Anwendungen und Real-Time Decisions. Fazit: eine gelungene Mischung aus Überblicks-Informationen und ganz konkreten Ideen für die spezifischen Anwendungsbereiche der Kunden. Die Eventreihe „BI goes Big Data“ macht im August in Hamburg und Frankfurt Station. Die kostenfreie Veranstaltung findet zusammen mit Steria Mummert Consulting statt und richtet sich an Endkunden. In Hamburg am 14.8.2013 – zur AnmeldungIn Frankfurt a.M. am 20.8.2013 – zur Anmeldung

  Read the article

• Quaternion based rotation and pivot position

  - by Michael IV

  I can't figure out how to perform matrix rotation using Quaternion while taking into account pivot position in OpenGL.What I am currently getting is rotation of the object around some point in the space and not a local pivot which is what I want. Here is the code [Using Java] Quaternion rotation method: public void rotateTo3(float xr, float yr, float zr) { _rotation.x = xr; _rotation.y = yr; _rotation.z = zr; Quaternion xrotQ = Glm.angleAxis((xr), Vec3.X_AXIS); Quaternion yrotQ = Glm.angleAxis((yr), Vec3.Y_AXIS); Quaternion zrotQ = Glm.angleAxis((zr), Vec3.Z_AXIS); xrotQ = Glm.normalize(xrotQ); yrotQ = Glm.normalize(yrotQ); zrotQ = Glm.normalize(zrotQ); Quaternion acumQuat; acumQuat = Quaternion.mul(xrotQ, yrotQ); acumQuat = Quaternion.mul(acumQuat, zrotQ); Mat4 rotMat = Glm.matCast(acumQuat); _model = new Mat4(1); scaleTo(_scaleX, _scaleY, _scaleZ); _model = Glm.translate(_model, new Vec3(_pivot.x, _pivot.y, 0)); _model =rotMat.mul(_model);//_model.mul(rotMat); //rotMat.mul(_model); _model = Glm.translate(_model, new Vec3(-_pivot.x, -_pivot.y, 0)); translateTo(_x, _y, _z); notifyTranformChange(); } Model matrix scale method: public void scaleTo(float x, float y, float z) { _model.set(0, x); _model.set(5, y); _model.set(10, z); _scaleX = x; _scaleY = y; _scaleZ = z; notifyTranformChange(); } Translate method: public void translateTo(float x, float y, float z) { _x = x - _pivot.x; _y = y - _pivot.y; _z = z; _position.x = _x; _position.y = _y; _position.z = _z; _model.set(12, _x); _model.set(13, _y); _model.set(14, _z); notifyTranformChange(); } But this method in which I don't use Quaternion works fine: public void rotate(Vec3 axis, float angleDegr) { _rotation.add(axis.scale(angleDegr)); // change to GLM: Mat4 backTr = new Mat4(1.0f); backTr = Glm.translate(backTr, new Vec3(_pivot.x, _pivot.y, 0)); backTr = Glm.rotate(backTr, angleDegr, axis); backTr = Glm.translate(backTr, new Vec3(-_pivot.x, -_pivot.y, 0)); _model =_model.mul(backTr);///backTr.mul(_model); notifyTranformChange(); }

  Read the article

• Fixing a NoClassDefFoundError

  - by Chris Okyen

  I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

  Read the article

• what's wrong with my sitemap?

  - by cadrian

  Google Webmaster Tools says that my sitemap is in a wrong format. I don't see my mistake, I think I followed every guideline provided by Google. Can someone help me? <?xml version="1.0" encoding="UTF-8"?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://www.vocalcontraste.fr/</loc> </url> <url> <loc>http://www.vocalcontraste.fr/presentation/</loc> <lastmod>2012-01-30T21:49:06+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/les-concerts/</loc> <lastmod>2012-12-13T21:55:00+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/ecoutez-contraste/</loc> <lastmod>2012-07-13T18:19:45+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/repertoire/</loc> <lastmod>2012-07-13T17:30:14+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/la-presse/</loc> <lastmod>2012-07-11T08:17:48+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/recrutement/</loc> <lastmod>2012-02-01T22:22:03+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/nos-partenaires/</loc> <lastmod>2012-07-11T07:43:31+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/contactez-nous/</loc> <lastmod>2012-02-02T19:01:32+01:00</lastmod> </url> </urlset>

  Read the article

• Seven Accounting Changes for 2010

  - by Theresa Hickman

  I read a very interesting article called Seven Accounting Changes That Will Affect Your 2010 Annual Report from SmartPros that nicely summarized how 2010 annual financial statements will be impacted.  Here’s a Reader’s Digest version of the changes: 1.  Changes to revenue recognition if you sell bundled products with multiple deliverables: Old Rule: You needed to objectively establish the “fair value” of each bundled item. So if you sold a dishwasher plus installation and could not establish the fair value of the installation, you might have to delay recognizing revenue of the dishwasher days or weeks later until it was installed. New Rule (ASU 2009-13): “Objective” proof of each service or good is no longer required; you can simply estimate the selling price of the installation and warranty. So the dishwasher vendor can recognize the dishwasher revenue immediately at the point of sale without waiting a few weeks for the installation. Then they can recognize the estimated value of the installation after it is complete. 2.  Changes to revenue recognition for devices with embedded software: Old Rule: Hardware devices with embedded software, such as the iPhone, had to follow stringent software revrec rules. This forced Apple to recognize iPhone revenues over two years, the period of time that software updates were provided. New Rule (ASU 2009-14): Software revrec rules no longer apply to these devices with embedded software; these devices can now follow ASU 2009-13. This allows vendors, such as Apple, to recognize revenue sooner. 3.  Fair value disclosures: Companies (both public and private) now need to spend extra time gathering, summarizing, and disclosing information about items measured at fair value, such as significant transfers in and out of Level 1(quoted market price), Level 2 (valuation based on observable markets), and Level 3 (valuations based on internal information). 4.  Consolidation of variable interest entities (a.k.a special purpose entities): Consolidation rules for variable interest entities now require a qualitative, not quantitative, analysis to determine the primary beneficiary. Instead of simply looking at the percentage of voting interests, the primary beneficiary could have less than the majority interests as long as it has the power to direct the activities and absorb any losses.  5.  XBRL: Starting in June 2011, all U.S. public companies are required to file financial statements to the SEC using XBRL. Note: Oracle supports XBRL reporting. 6.  Non-GAAP financial disclosures: Companies that report non-GAAP measures of performance, such as EBITDA in SEC filings, have more flexibility.  The new interpretations can be found here: http://www.sec.gov/divisions/corpfin/guidance/nongaapinterp.htm.  7.  Loss contingencies disclosures: Companies should expect additional scrutiny of their loss disclosures, such as those from litigation losses, in their annual financial statements. The SEC wants more disclosures about loss contingencies sooner instead of after the cases are settled.

  Read the article

• What does Ubuntu do when I signal undocking to a laptop?

  - by Seppo Erviälä

  It seems that Ubuntu runs some script or command when I signal that I want to undock my laptop by pressing the undock button on the dock. Most visible thing that happens is that resolution on external display is changed. After prepearing for undock my laptop is still connected to power, VGA-output and audio jacks through dock but not to any usb devices or optical drive. I'm running 11.04 on a ThinkPad X61s with X6 UltraBase. What happens when I signal undocking? This is what dmesg says after pressing undock button: [81459.990682] ata1.00: disabled [81459.990727] ata1.00: detaching (SCSI 0:0:0:0) [81459.991722] ACPI: \_SB_.GDCK - undocking [81460.009462] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020252] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xfe226c00-0xfe226fff] (PCI address [0xfe226c00-0xfe226fff]) [81460.020265] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020281] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b) [81460.020309] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [81460.020338] ehci_hcd 0000:00:1a.7: PME# disabled [81460.020346] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020352] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [81460.020363] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [81460.020372] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [81460.020432] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040071] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xfe227000-0xfe2273ff] (PCI address [0xfe227000-0xfe2273ff]) [81460.040085] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040104] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b) [81460.040133] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [81460.040170] ehci_hcd 0000:00:1d.7: PME# disabled [81460.040178] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040184] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [81460.040195] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [81460.040204] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [81460.040503] ehci_hcd 0000:00:1d.7: PCI INT D disabled [81460.040552] ehci_hcd 0000:00:1d.7: PME# enabled [81460.061657] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [81460.200414] usb 1-4: USB disconnect, address 14 [81462.220088] ehci_hcd 0000:00:1a.7: PCI INT C disabled [81462.220169] ehci_hcd 0000:00:1a.7: PME# enabled [81462.240115] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3

  Read the article

• 12.04 Unity 3D 80% CPU load with Compiz

  - by user39288

  EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

  Read the article

• JSR 355 Final Release, and moves JCP to version 2.9

  - by heathervc

  JSR 355, JCP EC Merge, passed the JCP EC Final Approval Ballot on 13 August 2012, with 14 Yes votes, 1 abstain (1 member did not vote) on the SE/EE EC, and 12 yes votes (2 members were not eligible to vote) on the ME EC.  JSR 355 posted a Final Release this week, moving the JCP program version to JCP 2.9.  The transition to a merged EC will happen after the 2012 EC Elections, as defined in the Appendix B of the JCP (pasted below), and the EC will operate under the new EC Standing Rules. In the previous version (2.8) of this Process Document there were two separate Executive Committees, one for Java ME and one for Java SE and Java EE combined. The single Executive Committee described in this version of the Process Document will be implemented through the following process: The 2012 annual elections will be held as defined in JCP 2.8, but candidates will be informed that if they are elected their term will be for only a single year, since all candidates must stand for re-election in 2013. Immediately after the 2012 election the two ECs will be merged. Oracle and IBM's second seats will be eliminated, resulting in a single EC with 30 members. All subsequent JSR ballots (even for in-progress JSRs) will then be voted on by the merged EC. For the 2013 annual elections three Ratified and two Elected Seats will be eliminated, thereby reducing the EC to 25 members. All 25 seats will be up for re-election in 2013. Members elected in 2013 will be ranked to determine whether their initial term will be one or two years. The 50% of Ratified and 50% of Elected members who receive the most votes will serve an initial two-year term, while all others will serve an initial one year term. All members elected in 2014 and subsequently will serve a two-year term. For clarity, note that the provisions specified in this version of the Process Document regarding a merged EC will apply to subsequent ballots on all existing JSRs, whether or not the Spec Leads of those JSRs chose to adopt this version of the Process Document in its entirety. <end of Appendix> Also of note:  the materials and minutes from the July EC meeting and the June EC Meeting are now available--following the July EC Meeting, Samsung and SK Telecom lost their EC seats. The June EC meeting also had a public portion--the audio from the public portion of the EC meeting are now posted online.  For Spec Leads there is also the recording of the EG Nominations call.

  Read the article

• Rendering My Fault Message

  - by onefloridacoder

  My coworkers setup  a nice way to get the fault messages from our service layer all the way back to the client’s service proxy layer.  This is what I needed to work on this afternoon.  Through a series of trials and errors I finally figured this out. The confusion was how I was looking at the exception in the quick watch viewer.  It appeared as though the EventArgs from the service call had somehow magically been cast back to FaultException(), not FaultException<T>.  I drilled into the EventArgs object with the quick watch and I copied this code to figure out where the Fault message was hiding.  Further, when I copied this quick watch code into the IDE I got squigglies.  Poop. 1: ((System 2: .ServiceModel 3: .FaultException<UnhandledExceptionFault>)(((System.Exception)(e.Result)).InnerException)).Detail.FaultMessage I wont bore you with the details but here’s how it turned out.   EventArgs which I’m calling “e” is not the result such as some collection of items you’re expecting.  It’s actually a FaultException, or in my case FaultException<T>.  Below is the calling code and the callback to handle the expected response or the fault from the completed event. 1: public void BeginRetrieveItems(Action<ObservableCollection<Model.Widget>> FindItemsCompleteCallback, Model.WidgetLocation location) 2: { 3: var proxy = new MyServiceContractClient(); 4:  5: proxy.RetrieveWidgetsCompleted += (s, e) => FindWidgetsCompleteCallback(FindWidgetsCompleted(e)); 6:  7: RetrieveWidgetsRequest request = new RetrieveWidgetsRequest { location.Id }; 8:  9: proxy.RetrieveWidgetsAsync(request); 10: } 11:  12: private ObservableCollection<Model.Widget> FindItemsCompleted(RetrieveWidgetsCompletedEventArgs e) 13: { 14: if (e.Error is FaultException<UnhandledExceptionFault>) 15: { 16: var fault = (FaultException<UnhandledExceptionFault>)e.Error; 17: var faultDetailMessage = fault.Detail.FaultMessage; 18:  19: UIMessageControlDuJour.Show(faultDetailMessage); 20: return new ObservableCollection<BinInventoryItemCountInfo>(); 21: } 22:  23: var widgets = new ObservableCollection<Model.Widget>(); 24:  25: if (e.Result.Widgets != null) 26: { 27: e.Result.Widgets.ToList().ForEach(w => widgets.Add(this.WidgetMapper.Map(w))); 28: } 29:  30: return widgets; 31: }

  Read the article

• Arçelik A.S. Uses Advanced Analytics to Improve Product Development

  - by Sylvie MacKenzie, PMP

  "Oracle’s Primavera P6 Enterprise Project Portfolio Management’s advanced analytics gives us better insight into the product development process by helping us to identify potential roadblocks.” – Iffet Iyigun Meydanli, Innovation and System Development Manager, R&D Center, Arçelik A.S. Founded in 1955, Arçelik A.S. is now the leading household appliance manufacturer in Turkey, and the third-largest household appliance company in Europe. It operates 14 production facilities in five countries (Turkey, Romania, Russia, China, and South Africa), with international sales and marketing offices in 20 countries. Additionally, the company manages 10 brands (Arçelik, Beko, Grundig, Blomberg, Elektrabregenz, Arctic, Leisure, Flavel, Defy, and Altus). The company has a household presence in more than 100 countries, including China and the United States. Arçelik’s Beko brand is among the top-10 household appliance brands in world, as a market leader for refrigerators, freezers, and washing machines in the United Kingdom. Arçelik implemented Oracle’s Primavera P6 Enterprise Project Portfolio Management for improved management of its design and manufacturing projects. With the solution, Arelik has improved its research and development (R&D) with the ability to evaluate technology risks when planning its projects. Also, it is now more easy to make plans for several locations, monitor all resources, and plan for future projects.  Challenges Improve monitoring of R&D resources?including human resources and critical laboratory equipment?to optimize management of the company’s R&D project portfolio Establish a transparent project platform to enable better product and process planning, gain insight into product performance, and facilitate advanced analytics that support R&D and overall business decisions Identify potential roadblocks for better risk management Solutions Worked with Oracle Partner PRM to implement Oracle’s Primavera P6 Enterprise Project Portfolio Management to manage the entire household-appliance, R&D project portfolio lifecycle, enabling managers and project leaders to better track and monitor resources and deliverables in real time Improved risk analysis and evaluation abilities for R&D projects Supported long-term planning needs Used advanced reporting features to capture data needed for budgeting and other project details, including employee performance evaluations Improved monitoring abilities and insight into the overall performance of products postproduction Enabled flexible, fast, and customized reporting with the P6 dashboard on a centralized platform to meet custom reporting needs for project leaders and support on-time and on-budget deliverables Integrated with other corporate departments, such as accounts payable, to upload project invoice data into the Primavera solution and the company’s e-mail system, so that project leaders will be alerted about milestones and other project related information Partner“Oracle Partner PRM provided us with a quick, reliable, and solution-focused approach to its support,” said Iffet Iyigun Meydanli, innovation and system development manager, R&D Center, Arçelik A.S. “The company’s service covered the entire spectrum of our needs, including implementation, training, configuration, problem solving, and integration.”

  Read the article

• ORACLE UK TECHNOLOGY “TEST FEST”

  - by mseika

  ORACLE UK TECHNOLOGY “TEST FEST” Join us at the UKOUG Conference at the ICC in Birmingham and Take your OPN Implementation Specialist Exam for Free! 3-5 December 2012, ICC Birmingham (UK) Dear Oracle Partner,** As a priority partner, we are sending you advance notice of these exclusive “Technology Test Fest” free examination sessions. Please note that this communication will be sent out to the wider community one week from today, so please register immediately to secure your place! ** We are delighted to offer you the exclusive opportunity to register and attend the Oracle UK “Technology Test Fest” being held as Part of the UKOUG Conference at the ICC in Birmingham in the Drawing Room at the Hyatt Regency hotel adjacent to the ICC venue, from 3rd to 5th December 2012.This is your opportunity to sit your chosen Oracle Technology Specialist Implementation Exam free of charge on this day. Four sessions are being run (10.00AM and 14.00PM), with just 15 places at each session – so register now to avoid disappointment! (Exams take about 1.5 hours to complete.) REGISTER - 3 December Afternoon Session - 2:00pm REGISTER - 4 December Morning Session 10:00am REGISTER - 4 December Afternoon Session - 2:00pm REGISTER - 5 December Morning Session - 10:00am Price: FREE Address:The Drawing Room Hyatt Regency Hotel Birmingham 2 Bridge Street Birmingham BI 2JZ 3 - 5 December 2012 Which Implementation Specialist Exams are available to take?Click here to see the list of exams available for you to sit for free at the Oracle UKOUG “Technology Test Fest”. The links also include the study guide for the particular exam. Please review the Specialization Guide as well. How do I register for the Oracle UK “Technology Test Fest”? Fill out the Pearson Vue profile HERE and complete it with your OPN Company ID. NB: Instructions on how to create/update the profile can be found HERE. Register for one of the 4 sessions using the registration links at the top of this page You will need to bring your own laptop with 'Windows OS' and a form of identification to be able to take any of the exams. Need Help or Advice?For more information about the tests and Get Specialized programme, please contact: [email protected] issues with your profile or any other OPN-related problems, please contact our Oracle Partner Business Centre: [email protected] or call 08705 194 194. We look forward to welcoming you to the Oracle UK “Technology Test Fest” on the 3rd- 5thDecember 2012! Book early to avoid disappointment.

  Read the article

• How to perform Cross Join with Linq

  - by berthin

  Cross join consists to perform a Cartesian product of two sets or sequences. The following example shows a simple Cartesian product of the sets A and B: A (a1, a2) B (b1, b2) => C (a1 b1,            a1 b2,            a2 b1,            a2, b2 ) is the Cartesian product's result. Linq to Sql allows using Cross join operations. Cross join is not equijoin, means that no predicate expression of equality in the Join clause of the query. To define a cross join query, you can use multiple from clauses. Note that there's no explicit operator for the cross join. In the following example, the query must join a sequence of Product with a sequence of Pricing Rules: 1: //Fill the data source 2: var products = new List<Product> 3: { 4: new Product{ProductID="P01",ProductName="Amaryl"}, 5: new Product {ProductID="P02", ProductName="acetaminophen"} 6: }; 7:  8: var pricingRules = new List<PricingRule> 9: { 10: new PricingRule {RuleID="R_1", RuleType="Free goods"}, 11: new PricingRule {RuleID="R_2", RuleType="Discount"}, 12: new PricingRule {RuleID="R_3", RuleType="Discount"} 13: }; 14: 15: //cross join query 16: var crossJoin = from p in products 17: from r in pricingRules 18: select new { ProductID = p.ProductID, RuleID = r.RuleID };   Below the definition of the two entities using in the above example.   1: public class Product 2: { 3: public string ProductID { get; set; } 4: public string ProductName { get; set; } 5: } 1: public class PricingRule 2: { 3: public string RuleID { get; set; } 4: public string RuleType { get; set; } 5: }   Doing this: 1: foreach (var result in crossJoin) 2: { 3: Console.WriteLine("({0} , {1})", result.ProductID, result.RuleID); 4: }   The output should be similar on this:   ( P01   -    R_1 )   ( P01   -    R_2 )   ( P01   -    R_3 )   ( P02   -    R_1 )   ( P02   -    R_2 )   ( P02   -    R_3) Conclusion Cross join operation is useful when performing a Cartesian product of two sequences object. However, it can produce very large result sets that may caused a problem of performance. So use with precautions :)

  Read the article

• Is my work on a developer test being taken advantage of?

  - by CodeWarrior

  I am looking for a job and have applied to a number of positions. One of them responded, I had a pretty lengthy phone interview (perhaps an hour +) and they then set me up with a developer test. I was told that this test is estimated to take between 6 and 8 hours and that, provided it met with their approval, I could be paid for my work on it. That gave me some pause, but I endeavored. The developer test took place on a VM accessed via RDP. The task was to implement a search page in a web project that requests data from the server, displays it on the screen in a table, has a pretty complicated search filtering scheme (there are about 15 statuses and when sending the search to the server you can search by these statuses) in addition to the string/field search. They want some SVG icons to change color on certain data values, they want some data to be represented differently than how it is in the database, etc. Loooong story short, this took one heck of a lot longer than 6-8 hours. Much of it was due to the very poor VM that I was running on (Visual Studio 2013 took 10 minutes to load, and another 15 minutes to open the 3 GB ginormous solution). After completing, I was told to commit my changes to source control... Hmm, OK. I get an email back that they thought that the SVGs could have their color changed differently, they found a bug in this edge-case, there was an occasional problem with this other thing that I never experienced, etc. So I am 13-14 hours into this thing now, and I have to do bug fixes. I do them, and they come back with some more. This is all apparently going into a production application. I noticed some anomalies in the code that was already in there where it looked like other people had coded all of one functionality and not anything else that I could find. Am I just being used for cheap labor? Even if they pay me the promised 50 dollars and hour for 6 hours, I have committed like 18 hours to this thing now. If I bug fix all of the stuff they keep coming up with, I will have worked at least 16 hours for free. I have taken a number of developer tests. I have never taken one where I worked on code that was destined for production. I have never taken one where I implemented a feature that was in the pipeline for development (it was planned for, and I implemented it through the course of the test). And I have never taken one that took 4 rounds and a total of 20+ hours. I get the impression that they are using their developer test to field some of the functionality, that they don't have time for in their normal team, on the cheap. Also, I wouldn't mind a 'devtest' tag.

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• Silverlight and WCF caching

  - by subodhnpushpak

  There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

  Read the article

• Oracle UK Technology "Tech Fest"

  - by rituchhibber

  ** As a priority partner, we are sending you advance notice of these exclusive “Technology Test Fest” free examination sessions. Please note that this communication will be sent out to the wider community one week from today, so please register immediately to secure your place! ** We are delighted to offer you the exclusive opportunity to register and attend the Oracle UK “Technology Test Fest” being held as Part of the UKOUG Conference at the ICC in Birmingham in the Drawing Room at the Hyatt Regency hotel adjacent to the ICC venue, from 3rd to 5th December  2012. This is your opportunity to sit your chosen Oracle Technology Specialist Implementation Exam free of charge on this day. Four sessions are being run (10.00AM and 14.00PM), with just 15 places at each session – so register now to avoid disappointment! (Exams take about 1.5 hours to complete.) Which Implementation Specialist Exams are available to take? Click here to see the list of exams available for you to sit for free at the Oracle UKOUG “Technology Test Fest”. The links also include the study guide for the particular exam. Please review the Specialization Guide as well. How do I register for the Oracle UK “Technology Test Fest”? Fill out the Pearson Vue profile here and complete it with your OPN Company ID. NB: Instructions on how to create/update the profile can be found here. Register for one of the 4 sessions using the registration links at the top of this page. 03rd December, 2012 at 14:00 04th December, 2012 at 10:00 am (Morning Session) 04th December, 2012 at 14:00 (Afternoon Session) 05th December, 2012 at 10:00 am (Morning Session) VENUE DETAILS: The Drawing Room Hyatt Regency Hotel Birmingham, 2 Bridge Street Birmingham, BI 2JZ 3 - 5 December 2012 You will need to bring your own laptop with 'Windows OS' and a form of identification to be able to take any of the exams. Need Help or Advice? For more information about the tests and Get Specialized programme, please contact: Ishacq Nada. For issues with your profile or any other OPN-related problems, please contact our: Oracle Partner Business Centre or call 08705 194 194. We look forward to welcoming you to the Oracle UK “Technology Test Fest” on the 3rd- 5thDecember 2012! Book early to avoid disappointment.

  Read the article

• Increase Availability for Data Center Virtual Environments

  - by Antoinette O'Sullivan

  With Oracle VM, you can increase availability and add flexibility for data center virtual environments. To get started, take training on Oracle VM Server for x86 and Oracle VM Server for SPARC as appropriate for your systems. You can take these live instructor-led courses from your own desk as a live-virtual event or travel to an education center for an in-class event. The Oracle VM Administration: Oracle VM Server for x86 course, in 3 days, teaches you about creating NFS and iSCI repositories, migration, cloning and exercising high availabillity. In-class events already on the schedule include:  Location  Date  Delivery Language  Zagreb, Croatia  11 November 2013  Croatian  Prague, Czech Republic  21 October 2013  Czech  Ballerup, Denmark  26 August 2013  English  Bordeaux, France  18 September 2013  French  Paris, France  9 October 2013  French  Strasbourg, France  11 September 2013  French  Hamburg, Germany  30 Septemeber 2013  German  Munich, Germany  28 October 2013  German  Budapest, Hungary  9 September 2013  Hungarian  Riga, Latvia  30 September 2013  Latvian  Oslo, Norway  16 September 2013  English  Warsaw, Poland  28 October 2013  Polish  Bucharest, Romania  14 October 2013  English  Istanbul, Turkey  23 December 2013  Turkish  Indonesia, Jakarta  19 August 2013  English  Canberra, Australia  4 November 2013  English  Melbourne, Australia  6 November 2013  English  Sydney, Australia  25 November 2013  English  San Francisco, CA, United States  16 September 2013  English  Roseville, MN, United States  21 October 2013  English  St Louis, MO, United States  11 November 2013  English  Reston, VA, United States  31 July 2013  English  Buenos Aires, Argentina  21 August 2013  Spanish The Oracle VM Server for SPARC: Installation and Configuration course, in 2 days, teaches you about configuring control and service domains, creating guest domains, using virtual disks and networks, and migration. In-class events already on the schedule include:  Location  Date  Delivery Language  Budapest, Hungary  12 September 2013  Hungarian  Prague, Czech Republic  9 September 2013  Czech  Colombes, France  7 October 2013  French  Stuttgart, Germany  28 October 2013  German  Madrid, Spain  5 September 2013  Spanish  Istanbul, Turkey 30 September 2013  Turkish   Petaling Jaya, Malaysia 15 August 2013  English   Singapore 5 August 2013  English   Cnaberra, Australia  12 August 2013 English  Melbourne, Australia  30 October 2013 English  Sydney, Australia  26 August 2013 English To register for a course or to learn more about Oracle's virtualization curriculum, go to http://education.oracle.com/virtualization.

  Read the article

• [EF + Oracle] Inserting Data (Sequences) (2/2)

  - by JTorrecilla

  Prologue In the previous chapter we have see how to create DB records with EF, now we are going to Some Questions about Oracle.   ORACLE One characteristic from SQL Server that differs from Oracle is “Identity”. To all that has not worked with SQL Server, this property, that applies to Integer Columns, lets indicate that there is auto increment columns, by that way it will be filled automatically, without writing it on the insert statement. In EF with SQL Server, the properties whose match with Identity columns, will be filled after invoking SaveChanges method. In Oracle DB, there is no Identity Property, but there is something similar. Sequences Sequences are DB objects, that allow to create auto increment, but there are not related directly to a Table. The syntax is as follows: name, min value, max value and begin value. 1: CREATE SEQUENCE nombre_secuencia 2: INCREMENT BY numero_incremento 3: START WITH numero_por_el_que_empezara 4: MAXVALUE valor_maximo | NOMAXVALUE 5: MINVALUE valor_minimo | NOMINVALUE 6: CYCLE | NOCYCLE 7: ORDER | NOORDER 8:    How to get sequence value? To obtain the next val from the sequence: 1: SELECT nb_secuencia.Nextval 2: From Dual Due to there is no direct way to indicate that a column is related to a sequence, there is several ways to imitate the behavior: Use a Trigger (DB), Use Stored Procedures or Functions(…) or my particularly option. EF model, only, imports Table Objects, Stored Procedures or Functions, but not sequences. By that, I decide to create my own extension Method to invoke Next Val from a sequence: 1: public static class EFSequence 2: { 3: public static int GetNextValue(this ObjectContext contexto, string SequenceName) 4: { 5: string Connection = ConfigurationManager.ConnectionStrings["JTorrecillaEntities2"].ConnectionString; 6: Connection=Connection.Substring(Connection.IndexOf(@"connection string=")+19); 7: Connection = Connection.Remove(Connection.Length - 1, 1); 8: using (IDbConnection con = new Oracle.DataAccess.Client.OracleConnection(Connection)) 9: { 10: using (IDbCommand cmd = con.CreateCommand()) 11: { 12: con.Open(); 13: cmd.CommandText = String.Format("Select {0}.nextval from DUAL", SequenceName); 14: return Convert.ToInt32(cmd.ExecuteScalar()); 15: } 16: } 17:  18: } 19: } This Object Context’s extension method are going to invoke a query with the Sequence indicated by parameter. It takes the connection strings from the App settings, removing the meta data, that was created by VS when generated the EF model. And then, returns the next value from the Sequence. The next value of a Sequence is unique, by that, when some concurrent users are going to create records in the DB using the sequence will not get duplicates. This is my own implementation, I know that it could be several ways to do and better ways. If I find any other way, I promise to post it. To use the example is needed to add a reference to the Oracle (ODP.NET) dll.

  Read the article

• MOSSt 2010 Hosting :: Dialog Platform in SharePoint 2010 & How to Open the Edit Form Dialog for List Item

  - by mbridge

  One of the New User Interface Platforms in SharePoint 2010 is ‘The Dialog Platform’ A dialog is essentially a <div> which gets visible on demand and renders the HTML using a background overlay creating a modal dialog like user experience. We can show an existing div from within the page or a different page using a URL inside the dialogs. When we pass the URL to the dialog it looks for the Querystring parameter “IsDlg=1”. If this parameters exists than it would dynamically load the "/_layouts/styles/dlgframe.css” file. This file overrides the “s4-notdlg” class items as “display:none”, which means that all items with this class would not get displayed in Dialog Mode.  So if we go to the v4.master page we can see that this class is used by the Ribbon control to hide the ribbon when in dialog mode: How to open the Edit Form Dialog for List Item: In SharePoint 2010 The URL for opening the Edit Form of any list item looks like something like this : http://intranet.contoso.com/<SiteName>/Lists/<ListName>/EditForm.aspx?ID=1&IsDlg=1 ID is the list item row identifier and as discussed above the IsDlg is for the dialog mode. Now to open a dialog we need to use the SP.UI.ModalDialog.showModalDialog method from the ECMAScript Client Object model and pass in the url of the page, width & height of the dialog and also a callback function in case we want some code to run after the dialog is closed. <script type="text/javascript">          //Handle the DialogCallback callback               function DialogCallback(dialogResult, returnValue){               }             //Open the Dialog           function OpenEditDialog(id){             var options = { url:&quot;http://intranet.contoso.com/<SiteName>/Lists/<ListName>/EditForm.aspx?ID=&quot; + id + &quot;&amp;IsDlg=1&quot;,              width: 700,              height: 700,              dialogReturnValueCallback: DialogCallback              };             SP.UI.ModalDialog.showModalDialog(options);           } </script> The .js files for the ECMAScript Object Model (SP.js, SP.Core.js, SP.Ribbon.js, and SP.Runtime.js ) are installed in the %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\14\TEMPLATE\LAYOUTS directory. Here is a good MSDN link explaining the Client Object Model Distribution and Deployment options available in SharePoint 2010 and this is the lowest costSharePoint 2010 Provider.

  Read the article

• Using extension methods to decrease the surface area of a C# interface

  - by brian_ritchie

  An interface defines a contract to be implemented by one or more classes.  One of the keys to a well-designed interface is defining a very specific range of functionality. The profile of the interface should be limited to a single purpose & should have the minimum methods required to implement this functionality.  Keeping the interface tight will keep those implementing the interface from getting lazy & not implementing it properly.  I've seen too many overly broad interfaces that aren't fully implemented by developers.  Instead, they just throw a NotImplementedException for the method they didn't implement. One way to help with this issue, is by using extension methods to move overloaded method definitions outside of the interface. Consider the following example: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public interface IFileTransfer 2: { 3: void SendFile(Stream stream, Uri destination); 4: } 5:   6: public static class IFileTransferExtension 7: { 8: public static void SendFile(this IFileTransfer transfer, 9: string Filename, Uri destination) 10: { 11: using (var fs = File.OpenRead(Filename)) 12: { 13: transfer.SendFile(fs, destination); 14: } 15: } 16: } 17:   18: public static class TestIFileTransfer 19: { 20: static void Main() 21: { 22: IFileTransfer transfer = new FTPFileTransfer("user", "pass"); 23: transfer.SendFile(filename, new Uri("ftp://ftp.test.com")); 24: } 25: } In this example, you may have a number of overloads that uses different mechanisms for specifying the source file. The great part is, you don't need to implement these methods on each of your derived classes.  This gives you a better interface and better code reuse.

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >