Search Results

Search found 7669 results on 307 pages for 'dealing with clients'.

Page 240/307 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• Exchange 2010 - Certificate error on internal Outlook 2013 connections

  - by Lorenz Meyer

  I have an Exchange 2010 and Outlook 2003. The exchange server has a wildcard SSL certificate installed *.domain.com, (for use with autodiscover.domain.com and mail.domain.com). The local fqdn of the Exchange server is exch.domain.local. With this configuration there is no problem. Now I started upgrading all Outlook 2003 to Outlook 2013, and I start to get consistently a certificate error in Outlook : The Name on the security certificate is invalid or does not match the name of the site I understand why I get that error: Outlook 2013 is connecting to exch.domain.local while the certificate is for *.domain.com. I was ready to buy a SAN (Subject Alternate Names) Certificate, that contains the three domains exch.domain.local, mail.domain.com, autodiscover.domain.com. But there is a hindrance: the certificate provider (in my case Godaddy) requires that the domain is validated as being our property. Now it is not possible for an internal domain that is not accessible from the internet. So this turns out not to be an option. Create self-signed SAN certificate with an Enterprise CA is an other option that is barely viable: There would be certificate error with every access to webmail, and I had to install the certificate on all Outlook clients. What is a recommended viable solution ? Is it possible to disable certificate checking in Outlook ? Or how could I change the Exchange server configuration so that the public domain name is used for all connections ? Or is there another solution I'm not thinking of ? Any advice is welcome.

  Read the article

• Nginx fails upon proxying PUT requests

  - by PartlyCloudy

  Hi. I have an arbitrary web server that supports the full range of HTTP methods, including PUT for uploads. The server runs fine in all tests with different clients. I now wanted to set this server behind an nginx reverse proxy. However, each PUT request fails. The entity body is not forwarded to the backend web server. The header fields are sent, but not body. I searched the nginx proxy documentation and find several hints that PUT might not be supported. But I also found people running svn/ web dav stuff behind nginx, so it should work. Any ideas? Here is my config: server { listen 80; server_name my.domain.name; location / { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://127.0.0.1:8000; } } Client == HTTP PUT ==> Nginx == HTTP Proxy ==> Backend Server The error.log shows no entries concerning this behaviour. Thanks in advance!

  Read the article

• Postfix + Exchange + ActiveDirectory; How to mix them

  - by itwb

  My client has got many sub-offices, and one head office. The headoffice has a domain name: business.com All users in the many sub-offices need to have a headoffice email address: [email protected] Anyone not in the head office will need the email forwarded to an external email address. All users in the head office will have their email delivered to Microsoft Exchange. Users are listed in Active Directory under two different OU's: HeadOffice or SubOffice. Is this something able to be configured? I've done some googling, but I can't find any examples or businesses set up this way. Edit: Postfix will accept all email, will need to determine to forward the email to an external account or alternatively have it delivered to MS Exchange. I've done some reading about MS Exchange and that you can 'mail-enable' contacts for forwarding - but I don't know if each AD account requires an Exchange CAL? The end goal is to forward email to external accounts to sub offices or accept email for head office. Maybe I don't need to worry about Postfix to perform this task..... http://www.windowsitpro.com/article/exchange-server-2010/exchange-server-licensing-some-of-your-questions-answered "What about client access licenses (CALs)? You need one CAL per user who will connect to Exchange. Although it might not be 100 percent precise, I prefer to think of it as one CAL per mailbox; there are exceptions for users outside your organization, automated tools that use mailboxes, and so on. Exchange doesn't enforce this limit, so it's on you to ensure that you have the correct number of CALs for the set of clients you support."

  Read the article

• Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

  - by kafka

  All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

  Read the article

• Creating multiple SFTP users for one account

  - by Tom Marthenal

  I'm in the process of migrating an aging shared-hosting system to more modern technologies. Right now, plain old insecure FTP is the only way for customers to access their files. I plan on replacing this with SFTP, but I need a way to create multiple SFTP users that correspond to one UNIX account. A customer has one account on the machine (e.g. customer) with a home directory like /home/customer/. Our clients are used to being able to create an arbitrary number of FTP accounts for their domains (to give out to different people). We need the same capability with SFTP. My first thought is to use SSH keys and just add each new "user" to authorized_keys, but this is confusing for our customers, many of whom are not technically-inclined and would prefer to stick with passwords. SSH is not an issue, only SFTP is available. How can we create multiple SFTP accounts (customer, customer_developer1, customer_developer2, etc.) that all function as equivalents and don't interfere with file permissions (ideally, all files should retain customer as their owner)? My initial thought was some kind of PAM module, but I don't have a clear idea of how to accomplish this within our constraints. We are open to using an alternative SSH daemon if OpenSSH isn't suitable for our situation; again, it needs to support only SFTP and not SSH. Currently our SSH configuration has this appended to it in order to jail the users in their own directories: # all customers have group 'customer' Match group customer ChrootDirectory /home/%u # jail in home directories AllowTcpForwarding no X11Forwarding no ForceCommand internal-sftp # force SFTP PasswordAuthentication yes # for non-customer accounts we use keys instead Our servers are running Ubuntu 12.04 LTS.

  Read the article

• How to configure network on Windows Server 2008

  - by Gokhan Ozturk

  I have a IBM x3400 Server Machine with Windows Server 2008 R2 installed on it. But, since I am not expert on networking I have some problems. These roles installed on my server: Active Directory DNS File Sharing Hyper-V ISS VPN There is two network card on them. I configured them like this: Local Connection 1: 192.168.30.3 255.255.255.0 192.168.30.2 127.0.0.1 Local Connection 2: 192.168.30.101 255.255.255.0 192.168.30.6 127.0.0.1 My problem is, when I use this Ip gateways, It is sharing internet to all computers. This is not I want. I want to use Local Connection 1 for internal network. I am giving all computers gateway and DNS IP as 192.168.30.3 The Local Connection 2 is for Hyper-V and VPN connections. 192.168.30.2 and 192.168.30.6 are my modem's gateways. I am using 192.168.30.6 external IP for VPN connections. There is two 24 port switches. There is a connection between them and this two ethernet card connected directly to them. And modems are connected to switches as well (Morems are not near the server. They are somewhere in the building). I disabled network Bridge and removed all ethernet cards from it. With this configuration, all computers can ping my server's IP (192.168.30.3) but on server I cannot ping any clients (Request timeout). What is the best way to configure my network? Thank you. Redgards

  Read the article

• Hosting multiple websites from home

  - by dean nolan

  I have just been accepted for Microsofts Wevsite Spark program which I mainly got for the tools, Visual Studio, Blend. I also have a few of my own websites, personal and a couple of business ones. I also work freelance and sometimes I would like a place to just put a demo up of a clients project. The websites I currently have are all on differnet hosting provders and domain registrars. The WebsiteSpark comes with Windows Server 2008 and SQL Server 2008. It would be really advantagous of me to have all these in one place but also so I have complete control over the database and the environment. So I am thinking over the next 4-6 months of migrating all this to my own server that I will host from home, or maybe even setup at home and then store in a proper datacentre. I was wondering what steps I should take and what to be aware of, specifically: 1) having all these different websites on one computer and having the url got to the proper place. 2) Cost effectiveness? Having the server in home as apposed to datacentre. Most solutions I see charge over £1000 a month to have a machine in datacentre. This is mostly for my own ease of management and shared hosting which I currently have is very limited configuration wise. Would getting a server in house be beneficial for then upgrading to the cloud? What measures should I take with my ISP? I know this is a lot I've asked but just even links to good articles would be good. Thanks

  Read the article

• iis not listening on port 80

  - by Holian

  Hello, We have server 2003 and ISA 2004 with IIS 6 on same machnie. Everything worked well till yesterday, when we try to make some new rule in ISA..but this is a long story... Unfortunatelly something happend with our intranet site. Our site is on the port 80, but if we try to open on this client machines then we got and error page (which error page is our provider): 403-forbidden; Remote host not listening, the remote host is not prepared to acceppt the connection request. On the server i can open the site with port 80. If i change the port number in the iis and try to open the site with the port, then works well. I try to shut down IIS and start apache with a simple page. On the server works well but in clients the problem is the same, so i think this is not an IIS related problem. In the ISA we have a web pub rule, with port 80, no auth. Im pulling out my hair, please help.

  Read the article

• SBS DC DNS entries going missing?

  - by Chris W

  I've been looking at a problem on a friends SBS (2003) server where the client PC's aren't able to connect to the server with a variety of errors reported. Checking the server itself the only indicator of an issue is an error 5782: Dynamic registration or deregistration of one or more DNS records failed with the following error: No DNS servers configured for the local system. Running a dcdiag reports that there are no DNS records registered for the DC so I fixed the problem by doing a netdiag /fix after which the dcdiag comes back clean and clients are ok again. It happened a few weeks ago as well and the same fix solved it. What are the possible causes of the DC DNS entries going missing? Is this a config option that needs tweaking or could it be solved by something simple like scheduling the SBS server to re-boot periodically? The only change they can think of that was made near to the time of the first instance of this problem occurring is that RRAS was started up to allow for a VPN connection from a home user. NB - The server is setup with a pair of NICs in a team so the server has a single virtual NIC providing both LAN/WAN connections to it. An external hardware firewall is in use rather than the windows firewall.

  Read the article

• sbs-server with 2 nics and 2 connections to the internet with different providers not working as it

  - by erik-van-gorp

  We have the following configuration : A sbs-2003 server in a domain (mydomain.com) with 2 network cards, each connected to a different network (provider), with different gateways, one for web and one for mail and clients. (we do this because the bandwitdh we get from our providers is too small to handle all the mail(+spam) traffic and webservices, so we took 2 providers) DNS is as follows : www.mydomain.com 1.2.3.4 mail.mydomain.com 5.6.7.8 NIC 1(192.168.1.3) is connected to to the internet through a firewall at 192.168.1.1, having wan address 1.2.3.4 NIC 2(10.0.0.3) is connected to to the internet through a firewall at 10.0.0.1, having wan address 5.6.7.8 Both nics have their default gateway installed at their corresponding routers. Also the metrics are set equal. (i know this isn't a supported config, but it works more or less). In this configuration i can use RDP on both wan adresses, and telnet to port 25 works as well on both. The issue now is that since a few weeks , we get regular disconnections, and website hickups(timeouts), several per hour. If we set one router to a higher metric, that route no longer works. In short, I want the mails to route through NIC2 and the web through NIC1. Any better configuration (without installing a second mail server) ?

  Read the article

• Inbox not updating in Exchange 2010, all users affected

  - by TuxMeister

  I'm battling against this darn issue this morning. We have the following setup: Big Hyper-V machine hosting the servers as VM's VM for CAS: WEB.XXX.local VM for Mailbox: EXC.XXX.local Servers are running Server 2008 R2 with Exchange 2010 SP1 Clients are all running Windows 7 Pro x64 with Outlook 2010 x64 The problem we're having is that nobody is able to see any emails received today (16th of October), but they are able to send externally. When I reply back to the email received externally, I don't get an NDR, yet the user cannot see my email. This is what I found and tried thus far: If we create a subfolder in Outlook 2010 and move any email from the inbox into that folder, changes will be immediately reflected in OWA We've been sending test emails to other users internaly and external email addresses and the sent items folder contains all those tests, synced properly to OWA as well Have tried crating a new profile, new emails are still missing Tried disabling Cache Mode, still no luck Also disabled "Download shared folders", still no luck Tried to setup a brand new Exchange mailbox and configured it on a VM that never had Outlook on it, still the same issue Tried restarting Exchange services on both CAS and Mailbox servers, no luck Tried rebooting both CAS and Mailbox servers, still no luck Performed a Mailbox Discovery on my admin account, emails from today are being found in the Discovery results, so the stuff is there, just not updating the user inboxes Any idea about what this hellish thing can be? I've done everything I can think of and also everything I could find out there. Let me know if you need any more details and thanks for reading this!

  Read the article

• Blocking of certain file downloads

  - by Philip Fourie

  I have a problem where I cannot completely download a certain file from a server. The file is 1.9MB in size but only 68% is downloaded and then it hangs. I tried and these cases, which failed: Downloaded the file with HTTP Downloaded the file with FTP Moved the file to different FTP and web servers behind the ISA firewall Tried with IIS 6.0 & IIS 7.0 Multiple download clients. Which included FireFox, FileZilla (on Windows) and wget (on Linux) This worked: Downloading other files from the same location on the server. Both bigger and smaller and in size than the original. FTP and HTTP worked. Earlier version of this file (.DLL) works. It is as if the content of this file has an influence on this file being served. Network architecture: Client Machine - Internet (ISP) - ISA Server - IIS 7.0 The only constants are the ISP, Cisco router and the ISA server. Is it possible that something is rejecting the download because of the contents of the file? I am hoping ISA is the culprit... I am not a ISA expert is there somewhere I can look to establish if it is indeed ISA causing this? Update: Splitting the file into two parts with a hex editor results in one half of the file being served correctly and the other part not. Zipping the file results in the file being downloaded successfully. However this is not an option for this particular scenario. Renaming the file and its extension also doesn't work. Update 2009/10/22: It does NOT seems to be ISA that is causing this problem. We connected a laptop (running IIS) on an available public IP and still the file download to 68% before it hanged. The two remaining components are the ISP and the Cisco 800 series router. Anyone knows about an issue on the router perhaps?

  Read the article

• Openvpn - stuck on Connecting

  - by user224277

  I've got a problem with openvpn server... every time when I trying to connect to the VPN , I am getting a window with login and password box, so I typed my login and password (login = Common Name (user1) and password is from a challenge password from the client certificate. Logs : Jun 7 17:03:05 test ovpn-openvpn[5618]: Authenticate/Decrypt packet error: packet HMAC authentication failed Jun 7 17:03:05 test ovpn-openvpn[5618]: TLS Error: incoming packet authentication failed from [AF_INET]80.**.**.***:54179 Client.ovpn : client #dev tap dev tun #proto tcp proto udp remote [Server IP] 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert user1.crt key user1.key <tls-auth> -----BEGIN OpenVPN Static key V1----- d1e0... -----END OpenVPN Static key V1----- </tls-auth> ns-cert-type server cipher AES-256-CBC comp-lzo yes verb 0 mute 20 My openvpn.conf : port 1194 #proto tcp proto udp #dev tap dev tun #dev-node MyTap ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/VPN.crt key /etc/openvpn/keys/VPN.key dh /etc/openvpn/keys/dh2048.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt #push „route 192.168.5.0 255.255.255.0? #push „route 192.168.10.0 255.255.255.0? keepalive 10 120 tls-auth /etc/openvpn/keys/ta.key 0 #cipher BF-CBC # Blowfish #cipher AES-128-CBC # AES #cipher DES-EDE3-CBC # Triple-DES comp-lzo #max-clients 100 #user nobody #group nogroup persist-key persist-tun status openvpn-status.log #log openvpn.log #log-append openvpn.log verb 3 sysctl : net.ipv4.ip_forward=1

  Read the article

• How can I create a VLAN on my extreme switch for a seperate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Easiest way to allow direct HTTPS connection in Intercept mode?

  - by Nicolo

  I know the SSL issue has been beaten to death I'm using DNS redirect to force my clients to use my intercept proxy. As we all know, intercepting HTTPS connection is not possible unless I provide a fake certificate. What I want to achieve here is to allow all HTTPS requests connect directly to the source server, thus bypassing Squid: HTTP connection Proxy by Squid HTTPS connection Bypass Squid and connect directly I spent the past few days goolging and trying different methods but none worked so far. I read about SSL tunneling using the CONNECT method but couldn't find any more information on it. I tried a similar method in using RINETD to forward all traffic going through port 443 of my Squid back to the original IP of www.pandora.com. Unfortunately, I did not realize all other HTTPS requests are also forwarded to the IP of www.pandora.com. For example, https://www.gmail.com also takes me to https://www.pandora.com Since I'm running the Intercept mode, the forwarding needs to be dynamic and match each HTTPS domain name with proper original IP. Can this be done in Squid or iptables? Lastly, I'm directing traffic to my Squid server using DNS zone redirect. For example, a client requests www.google.com, my DNS server directs that request to my Squid IP, then my transparent Squid will proxy that request. Will this set up affect what I'm trying to achieve? I tried many methods but couldn't get it to work. Any takes on how to do this?

  Read the article

• Change Outlook's default calendar to iCloud (meeting requests end up in wrong calendar)

  - by flohei

  Following scenario: I've got a main computer (Windows 7, Office 2010) which is being used to manage contacts, meetings, etc. using Outlook. Now I've added an iPad and an iPhone to sync using iCloud. I moved all appointments and contacts from the old PST file to the iCloud file. All the data syncs nicely. The email account I'm using in Outlook is an IMAP account which opens up another data file which brings us to a total of three data files in Outlook's side bar. The problem: When one of our clients sends us meeting requests via email they show up in the IMAP's inbox. When we open them up they automatically get added to Outlook's default calendar (the one in the original PST). Is there any chance not to add them to that calendar but the iCloud one? Basically we could completely get rid of the original PST since we don't use it at all anymore but the settings do not allow me to remove this PST file and set the iCloud one as default. Thanks!

  Read the article

• Consulting: Organizing site/environment documentation for customers?

  - by ewwhite

  Over time, I've taken on consulting and contract engineering work for various clients. More recently, customers are asking for certain types of documentation. These are small businesses and typically do not have dedicated technical staff. Within a single company, Wiki/Confluence/Sharepoint, etc. all make sense as a central repository for documentation and environment information. I struggle with finding a consistent method to deliver the following information to discrete customers. I'm shooting for a process that's more portable, secure and elegant than a simple spreadsheet or the dreaded binder full of outdated information. Important IP addresses, DHCP scope, etc. Network diagram (if needed). Administrative usernames and passwords and management URLs. Software license keys. Support contracts and warranty information. Vendor support contacts and instructions. I know there are other consultants here. Any suggestions or tips on maintaining documentation across multiple environments in a customer-friendly format? How do you do it?

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• Pushing Windows Store apps silently

  - by seagull

  As part of a requirement I have been issued, I seek the ability to push apps from the Windows Store (.appx) to remote users. The framework surrounding the data transmission is sorted; What I need to know is if there is a script that can be sent out along with a URI or the package proper to facilitate installation on the user-side of the Windows Store app. I am well aware that numerous guides exist from Microsoft on pushing out Line-of-Business (LOB) (AKA Enterprise) applications -- that is, apps that have been developed in-house and are not for the consumption of the Windows store. This is inappropriate for my requirement, however; the customer wants their clients to receive apps that appear currently on the Windows Store, and for them to be installed in a silent manner. I've seen this guide; http://blogs.technet.com/b/keithmayer/archive/2013/02/25/step-by-step-deploying-windows-8-apps-with-system-center-2012-service-pack-1.aspx, which details doing exactly this, but it is only applicable to machines that are administered by a system running Windows Server 2012 R2 with the 'System Center 2012' bundle installed. The systems I target are considerably more decentralised than this, making this guide inappropriate. I have a hunch that Microsoft have deliberately designed the Windows Store to be this way, but I figured I ought to ask around before I resign myself to the requirement. Much obliged

  Read the article

• VPN into multiple LAN Subnets

  - by Rain

  I need to figure out a way to allow access to two LAN subnets on a SonicWall NSA 220 through the built-in SonicWall GlobalVPN server. I've Googled and tried everything I can think of, but nothing has worked. The SonicWall NSA management web interface is also very unorganized; I'm probably missing something simple/obvious. There are two networks, called Network A and Network B for simplicity, with two different subnets. A SonicWall NSA 220 is the router/firewall/DHCP Server for Network A, which is plugged into the X2 port. Some other router is the router/firewall/DHCP server for Network B. Both of these networks need to be managed through a VPN connection. I setup the X3 interface on the SonicWall to have a static IP in the Network B subnet and plugged it in. Network A and Network B should not be able to access each other, which appears the be the default configuration. I then configured and enabled VPN. The SonicWall currently has the X1 interface setup with a subnet of 192.168.1.0/24 with a DHCP Server enabled, although it is not plugged in. When I VPN into the SonicWall, I get an IP address supplied by the DHCP Server on the X1 interface and I can access Network A remotely although I do not have access to Network B. How can I allow access to both Network A and Network B to VPN clients although keep devices on Network B from accessing Network A and vice-versa. Is there some way to create a VPN-only subnet (something like 10.100.0.0/24) on the SonicWall that can access Network A and Network B without changing the current network configuration or allowing devices on both netorks "see" each other? How would I go about setting this up? Diagram of the network: (Hopefully this kind of helps) WAN1 WAN2 | | [ SonicWall NSA 220 ]-(X3)-----------------[ Router 2 ] | | (X2) 192.168.2.0/24 10.1.1.0/24 Any help would be greatly appriciated!

  Read the article

• IPv6 works only after ping to routing box

  - by Ficik

  Situation: There is ipv4 only router in network and every computer is connected to it (wifi or cable). Server with ipv4 and ipv6 is connected to this router as well. Server has configured tunnelbrokers 6to4 tunnel and radvd. Clients in network has right prefix and can ping each other. But they can't ping to internet until they ping Server (the one with tunnel). I found somewhere that it's icmp problem, but I couldn't find solution. Is it problem that there is ipv4 only router? server and client runs linux router runs dd-wrt without ipv6 support :( Ping try: standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes ^C --- ipv6.google.com ping statistics --- 29 packets transmitted, 0 received, 100% packet loss, time 28223ms standa@standa-laptop:~$ ping6 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 PING 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478(2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478) 56 data bytes 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=1 ttl=64 time=3.55 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=2 ttl=64 time=0.311 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=3 ttl=64 time=0.269 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=4 ttl=64 time=0.292 ms ^C --- 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.269/1.107/3.559/1.415 ms standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes 64 bytes from 2a00:1450:8007::69: icmp_seq=1 ttl=57 time=20.7 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=2 ttl=57 time=20.2 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=3 ttl=57 time=23.4 ms ^C --- ipv6.google.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2001ms rtt min/avg/max/mdev = 20.267/21.479/23.413/1.392 ms

  Read the article

• W2003StdR2 server: DNS dysfunctional!

  - by Tor

  I hate to have to do this, but i feel up that creek with no... well, some of you might know. At the moment my one and only DNS server refuses to do Forwarding. The story is as goes: This site had 2 servers, one W2003SBS and an W2003StdR2. The SBS degraded over a short periode of time, and to not go down with it i decided to move all data over to the other server. This was of course an AD integrated site. Move went ok, the Std server removed from the domain, and the SBS put to rest. For the time being we decided to run the Std as a server only, and no AD. We renamed the internal domain to xxx.local, and set the server up with DNS, DHCP and installed WINS (not activated). Forwarding of DNS is to our ISP through a Netgear Firewall. The same address setup used as before. So - DNS server started and all went ok, clients reconfigured and hooked up and then - after a day's time - internet name resolution stopped working on the server! Nothing had changed, been altered, modified, nothing! What i now get when doing NSLOOKUP is just a 2 sec timeout response! And i have checked and looked, but to no avail. Anybody seen this behaviour before? And yes - ALL servicepacks have been updated on the server. I would be much obliged if anyone in here could lend an ear... and give advice! Thanks.... from Tor in Norway Today is the 14th, and i still have no resolution to this nagging problem. Anybody else got any advice in the matter? Please?

  Read the article

• Plesk FTP not working but SFTP and Shell is working

  - by shamittomar

  I am facing a strange problem. The FTP on my Plesk VPS is not working. Whenever I try to connect, FileZilla FTP client says: Status: Resolving address of xxxxxxxxxxxxx.com Status: Connecting to xxx.xxx.xxx.xxx:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server So, it's not even going to the step of asking username/password. So, it's something else. The SFTP on port 22 is working fine. Also, I can successfully do shell access and run commands. But, I NEED FTP access too on port 21. I have searched everywhere but can not find any setting to enable it. This is the Plesk version info: Parallels Plesk Panel version 9.5.2 Operating system Linux 2.6.26.8-57.fc8 CPU GenuineIntel, Intel(R) Pentium(R) 4 CPU 3.00GHz Any help is appreciated. [EDIT]: The firewall is not blocking it. I have checked it on server and there are absolutely no blocking rule. Firewall states: All incoming/outgoing connections are accepted on FTP And on client-side (my PC), I can connect to other FTP servers so this is not an issue in my PC's firewall. Moreover, I can not even connect to the FTP from online FTP clients like net2ftp.

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >