Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 240/494 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • Why Does My iMac Keep Setting the Screen Brightness to 'Full'?

    - by TomB
    I have a 2 week old 24" iMac running Mac OS X 10.6. It is the primary monitor with the menu bar on the top of display. I have an external monitor as well, a 19" Viewsonic LCD. The LCD is set to the left side of the iMac, rotated 90 degrees CCW and has the Dock along the far left edge. When I restart the screen brightness on the iMac reverts to Full brightness. The Viewsonic LCD retains the setting I have for it. I am using a Mini DVI to DVI cable for the external display. I even tried setting my Huey Pro to do automatic screen adjustment based on ambient lighting but the iMac still goes to stun with a reboot. I am sure it is something dumb I have overlooked.

    Read the article

  • linksys wap54g default wpa wireless key?

    - by jack
    Hi I wrongly pressed the push button in linksys wap54g web administration. Then it restarted and stated that it's protected with WPA while I first configured it as WEP. So, my old key didn't work. What should I do? Plugin with wire cable to reconfigure it? - which is the only way? coz it was embedded in ceiling. I found no solutions in product manual and google. Thank you.

    Read the article

  • How to set up wireless access on a Cisco router

    - by Carlos
    Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

    Read the article

  • How can I rebuild the index in Thunderbird 3.0?

    - by Martin
    Hello, I have just deleted a lot of old messages (about 3,000) from my Thunderbird 3.0 profile. When I now use the new search feature (search all messages), TB still finds the deleted ones. I deleted them this way: I moved the messages to an own "archive" folder (not the built-in archive feature). Then I stopped TB and moved the archive files and folders to a different place on my file system. Then restarted TB. I archive my messages this way for years now. So, it seems that Thunderbird does not notice the deletion of my messages, thus the index is not updated. How can I tell TB to instantly rebuild the index?

    Read the article

  • Ultra-lightweight web browser?

    - by zildjohn01
    Are there any good super-lightweight graphical web browsers out there? I'd like to be able to browse the web on an old PC, but the mainstream crop of browsers is just too heavy, and I don't want to resort to something like Lynx. There must be something decent out there that'll fit in 16 or 32MB of RAM comfortably. 100% standards compliance isn't necessary, but I'd like something that supports the most widely used parts of CSS and JavaScript. The goal is to get 98% of sites usable in a nice, graphical format.

    Read the article

  • How to reset Nexus One to Android 2.2.1 or 2.3?

    - by jblocksom
    I have a Nexus One (with the radios for the AT&T network) which has an old beta version of 2.2 on it. It doesn't receive over the air updates, and I'd like to get it running something more recent. Where can I find a download for Android 2.2.1 or 2.3? There's a link to an updater on Google's site that's given by numerous blogs but it's always broken. It's kind of bizarre to me that this phone is stuck in an OS limbo since it won't receive updates and there's no place to download the latest.

    Read the article

  • WLAN LED randomly blinking when there is no traffic

    - by mrc
    Hi, I've got a Linksys WUSB54GC WLAN USB interface (Ralink chipset) and I'm running Debian GNU/Linux 6.0. The LED very often randomly blinks although there is no traffic in the network. I checked this with Wireshark. Sometimes, but rarely, the LED stops blinking. The issue is present in Ubuntu and Fedora too. It was not present in Debian Lenny with Linux 2.6.28. I checked an old live cd with ubuntu 8.10 with kernel 2.6.27 and it was also OK. So I guess that's an issue with Linux kernel and its wireless driver or firmware. Has anybody observed a similar thing? Does anybody know how to help this annoying blinking? Thanks.

    Read the article

  • Can I list file names (or their parent directories) that were recently deleted using rm in OS X?

    - by Andrew Grimm
    Is it possible to find out which files and directories have recently been deleted by rm in OS X? Or failing that, is it possible to find which parent directories have had files or directories within it deleted? The OS version is Snow Leopard. Background: Last night, rvm (ruby version manager) did rm -rf of the ~/ruby directory from the home directory. (This bug has since been fixed) Ideally, I'd like to know what files within the ~/ruby directory were deleted, but failing that, I'd like to know if rvm deleted anything outside of ~/ruby . In case anyone's wondering about backups...: Just about everything within ~/ruby is a git project that has a remote repo, and I have a fairly recent Time Machine backup (only 20 days old).

    Read the article

  • Are periodic full backups really necessary on an incremental backup setup?

    - by user2229980
    I intend to use an old computer I have as a remote backup server for myself and a few other people. We are all geographically separated, and the plan is to do incremental daily backups using rsync and ssh. My original idea was to make one initial full backup then never again have to deal with the overhead of doing it, and from that moment on only copy the files changed since the last backup. I've been told that this could be bad, but I fail to understand why. Since each snapshot is comprised of hard links to the unchanged files plus the original changed ones, isn't it going to be identical to a new full backup? Why would I want to make another full backup?

    Read the article

  • Laptop abruptly powers off after few seconds of booting

    - by Alan Mendelevich
    I have a 3 year old HP Pavilion dv2208 laptop. Recently it started abruptly powering off in like ~20-30 seconds into Windows boot sequence after almost every reboot/shutdown. Even if I leave it in Repair/Start Windows Normally stage it powers off anyway. The only way I managed to workaround this is to enter BIOS setup screen and leave it on for no less than 10 minutes. I don't know what happens there but this helps every time. Any ideas of possible ways to fix this that don't include replacing motherboard are highly appreciated. P.S.: I've tried resetting BIOS to defaults, updating to the latest BIOS version, etc. Happens with both Vista and Windows 7.

    Read the article

  • Copying dovecot maildir to another server with courier maildir

    - by NovumCoder
    Hi all, i just moved all my mailboxes first from one server to the new one by using rsync. After that i created the folders using Thunderbird to have same folder structure like on old server. Then i copied all mail files into the folders. Now when i subscribe and click on the folder in Thunderbird it starts downloading the headers of all mails, but after finishing download nothing appears in the mail list. Its like my folder is empty and everytime i click again on the folder thunderbird starts again downloading headers. What is wrong here? I found a solution using a tool called imapsync, but its not for free, so i started doing it by copy&paste. I thought Thunderbird will be able to fix the indexes. :-( Or is there a better solution to migrate from dovecot maildir to courier maildir?

    Read the article

  • Notepad++ setting to clear the undo buffer on save

    - by J Jones
    Hello, I've noticed that Notepad++ is clearing the undo buffer when I save a file. This just started happening when I updated the editor to version 5.6.8. (previous version was pretty old... 5.3.? perhaps...) I've seen one reference out there (look at last bullet of answer) that this might be a setting I can change. But for the life of me, I can't find it. Anyone familiar with this?

    Read the article

  • Brand New MOnitor Won't Get Input From CPU

    - by HollerTrain
    I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

    Read the article

  • Connect to development server via switch?

    - by letseatfood
    I apologize upfront if this isn't appropriate for superuser. I asked it on serverfault and was told it was too general for that site. I have a laptop with Vista and it receives it's internet connection wireless. I have an old desktop with Ubuntu 10.04 Server Edition installed and it is setup as a development server with Apache, MySQL, and PHP. This works well, with the server having a static IP address. The server is connected to the router via an Ethernet cable. Is it possible to disconnect the cable that is currently connecting the server and the router, then connect the server and workstation to a switch, so that I am still able to connect to the server via web browser from the workstation? I am trying to eliminate the long ethernet cable connecting the server to the router in the other room. I already have a switch, that is why I asked specifically about it. Thanks and I will be more than happy to clarify!

    Read the article

  • IBM x260m won't boot from PCI SATA card

    - by syrenity
    Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The x260m server fails to boot with error 1962: "Boot sector not found." When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS to boot from the SATA card. Has anyone encountered and solved such issue? EDIT: We tried disabling the on-board Sata controller (Hostraid/SAS?), but there is no such option - only enable, enhanced and compatible. Tried also to chance boot device priority to all possible choices - no luck. Thanks in advance!

    Read the article

  • diagnosing random power down crashes on a hackintosh [closed]

    - by Iain
    I have a hackintosh running on a Gigabyte P55M UD2. It has run without a single issue as a hackintosh for about 9 months, and the machine is about 2.75 years old. Never had issues when it was just linux box. Power supply is 750 Watts. It recently started spontaneously rebooting, no seeming connected to any particular use case or ram/cpu load. There is no hanging or anything, just suddenly acts like the power went out. The frequency of which seems to be increasing. I've tried using just one of each of the two ram sticks, and it happens with either one in. I'm not sure what to try next, is there some way of determinging whether it's a mobo, cpu, or powersupply issue short of replacing them all? thanks! Iain

    Read the article

  • Using AutoMySQLBackup on Rackspace Cloud

    - by xref
    Since Rackspace Cloud only allows FTP access it makes using AutoMySQLBackup a little trickier, and while it is at least creating DB dumps I get errors in the backup log: ###### WARNING ###### Errors reported during AutoMySQLBackup execution.. Backup failed Error log below.. .../backups/automysqlbackup: line 1791: /usr/bin/find: Permission denied .../backups/automysqlbackup: line 1855: /usr/bin/find: Permission denied .../backups/automysqlbackup: line 803: /usr/bin/find: Permission denied .../backups/automysqlbackup: line 1972: /usr/bin/du: Permission denied Since files are being created I'm assuming the find command failing has to do with actually rotating out and deleting the old backups? Line 803: find "${CONFIG_backup_dir}/${subfolder}${subsubfolder}" -mtime +"${rotation}" -type f -exec rm {} \; Any ideas for alternatives?

    Read the article

  • On Windows, what filename extensions denote an executable?

    - by Ken
    On Windows, *.exe, *.bat, *.cmd, and *.com all represent programs or shell scripts that can be run, simply by double-clicking them. Are there any other filename extensions that indicate a file is executable? EDIT: When I jump into a new project (or back into an old project!), one of the common things I want to do when looking around is to find out what tools there are. On Unix (which I've used for decades), there's an execute bit, so this is as simple as: find . -executable -type f I figured that on Windows, which seems to have a much more complex mechanism for "is this executable (and how do I execute it)", there would be a relatively small number of file name extensions which would serve roughly the same purpose. For my current project, *.exe *.bat *.cmd is almost certainly sufficient, but I figured I'd ask if there was an authoritative list.

    Read the article

  • Thunderbird gives " Not enough disk space " alert, after trying to download more emails ( Win 7, 64 bit )

    - by James C
    So, today I have installed Mozilla Thunderbird 24.2.0 on my Windows 7 (64 bit) machine. It was downloading emails, until it hit an error. An alert showed up saying : "There is not enough disk space to download new messages. Try deleting old mail, emptying the Trash folder, and compacting your mail folders, and then try again." Now, disk space is not a problem, there is enough free space left ( almost 50 % of the drive ). How to stop the alert and continue downloading ?

    Read the article

  • How do you redirect pages from a directory to a subdirectory?

    - by kezzman11
    I had recently moved all the content on my website from being in the www.mysite.com/shop directory to being in the root directory. This means that I needed to redirect any request to visit a page with the /shop directory back to the same page in the root directory eg. www.mysite.com/shop/categories/washroom to www.mysite.com/categories/washroom This needed to happen with all pages in my site that were previously using the /shop directory. I was given a solution on here which was: RedirectMatch (^/shop/)(.*) http://www.mysite.com/$2 and it works perfectly however now I have had to switch back to using our old version of our software which is located at the /shop directory so I need the complete opposite redirect now eg. www.mysite.com/categories/washroom to www.mysite.com/shop/categories/washroom Can anyone help me please?

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

  • DHCP server with database backend

    - by Cory J
    I have been looking around for something to replace my (ancient) ISC-DHCPd server. A DHCP server with a database backend sounds like a great idea to me, as I could then have a nice, friendly web interface to my server. Surprisingly, I can't any major open-source projects that offer this. Does anyone know of one? I have also read about modifying ISC to use a database backend...can anyone tell me if this solution is stable enough for a busy production server? Or is using a database a Bad Idea™ all together? PS - http://stackoverflow.com/questions/893887/dchp-with-database-backend looks like SO couldn't answer this old, similar question. EDIT: I am looking for something on a free OS platform, Linux or BSD. If there is something absolutely great that is Windows-only though, still interested.

    Read the article

  • MacBook says to replace battery. Should I?

    - by Palantir
    Hi! My MacBook says that battery is not charging, and the battery is completely empty (in fact, pressing the button on the battery illuminates no LEDs). If I plug the power adapter off the mac shuts off immediately. I tried with a spare adapter, and it won't charge it. System information says it has 380 cycles. The battery is 2.5 years old. System profiler says the battery has 0 mAh of capacity, and that it should be replaced. Should I just buy a new battery, or should I bring it to an apple point, and leave it there? They can take a look at it (it's on AppleCare), they told me that they will repair it is there is anything wrong with the charging circuit, but they won't give me a new battery. They will keep the laptop for 10 working days at least... I hate when this happens :P

    Read the article

  • Refering to a Cell in a Different Workbook

    - by Anna
    I work between different spreadsheets, and I like to have one main workbook that links to certain cells in other workbooks. For example, I will do a statement of business activities workbook that has all the business expenses listed, and then I will have individual workbooks for each expense account. In the old excel, I would just put =(and then go to the workbook that i wanted, and then select the cell i wanted and then hit enter) and it would put the amount from that specific cell in my statement of business activities. When I try to do that in excel 2010, I put the equals sign in the cell, and then go to the other workbook and find the cell I want, and when I hit enter, it just moves down a line and nothing happens in the other workbook. How can I get this to work again, what do i need to do??

    Read the article

  • Wireless card not found on Ubuntu

    - by idealflip
    Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >