Search Results

Search found 8843 results on 354 pages for 'partition master'.

Page 240/354 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • differencing disk opinions

    - by troth
    I've read about the performance issues with dfferencing disks but I still think there is a solid place for them and thats the os boot partition. If I'm going to have 20 vms on a csv based volume I don't won't to waste the 20+ gigs per guest just for the os boot. If I get a good base disk with all of the most used applications installed and have the pagefile located somewhere else I don't think the delta's would be that great thus it should not create a performance issue. Also in a SAN based csv volumes does it make any sense in having the pagefile go to a seperate csv volume? Any opinions on this? thanks

    Read the article

  • Permanently mount multiple directories from different disks under /

    - by piotrek
    I have SSD and HDD. Some directories like /var, /srv and /tmp should be on HDD, while /boot, /usr and /lib on SSD. But do I have to create separate partition for every single directory? I want to have 2 or so partitions. One for each disk and distribute directories as needed. Is it possible and how? I've heard about symlinks, mount --bind, mhddfs but: symlinks are treated differently by tools like cp, so I'm not sure if it's safe to have main system directories symlinked I have no idea how can I use mount --bind or mhddfs in fstab

    Read the article

  • Simple, manageable DNS on EC2?

    - by dkulchenko
    I'm working on a large network of servers sitting on EC2, and need a way for the servers to know about each other's locations in the cloud. I thought the simplest way would be to use DNS, because if I replace the EC2 instance, I simply update the DNS record, and the rest of the servers will know about it (with names like users.db.mysoft.com, routing.mysoft.com, cluster1.memcached.mysoft.com). I'm considering setting up a master DNS server on a micro/small instance to accommodate this. I'd preferably need something that's as simple as a key-value store (hostname - IP) into which the platform could remotely add/remove entries. Can I do this with BIND? Or is there a better solution?

    Read the article

  • Reinstalling Mac OS X without original disc

    - by synapse
    I've had Mac OS X Lion installed on a mid-2011 iMac. I've erased the main partition and when I try to repair OS installation it connects to the Internet and says that it can't continue and I should contact Apple Support. I don't have original CD which should've come with an iMac. How can I install at least some version of OS X? Update: I've downloaded what looks like an installation app for Mac OS X Lion with a 4.6Gb InstallESD.dmg file but can't open it on Windows. I've tried PowerISO and MagicISO to no effect. Is it possible to create Mac OS installation media on Windows?

    Read the article

  • problems with WindowsImageBackup and write protected drives

    - by Ralph Shillington
    On Windows 7 I created a System image of my computer (C: and reserved partition) onto a USB drive. No problem. I then formatted the C: and installed the OS -- no problem Now I would like use the System Image and get back some of my documents etc. But I can't get access wo the WindowsImageBackup folder on the USB drive 1) Somehow the drive is write protected --- how did that happen? How do I unprotect that drive. 2) I can't access the WindowsImageBackup folder because I suspect the ACL is out of wack with my new SID. I would add my new SID to the ACL but I can't because the drive is write protected At the moment I'm completely disconnected from my files, which I thought (and still hope) are backed up. Understandably, panic is now setting in.

    Read the article

  • Ubuntu server 9.10 freezes up after ~10 minutes

    - by Matt Williamson
    I just upgraded my Ubuntu server from 9.04 to 9.10 and after about 10 minutes it locks up. It won't respond to ping, can't ssh in and the terminal doesn't accept keyboard input. It does not have X installed. I then reformatted and installed it from scratch with the same results. There are two hard drives, the first is for the OS and the second is for media. The second has not changed, it is an ext3 formatted drive with one partition. I stopped random services (samba, ushare, transmission-daemon) to see if they were causing the issue, but it still locked up. I did a watch "dmesg|tail" until it locked up, but I didn't see anything. How can I troubleshoot this further? I don't want to downgrade. Machine specs: Dell Dimension 3000 Pentium 4 @3GHz 512M RAM

    Read the article

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • LDAP (slapd) creating users with access to specific trees

    - by Josh
    I am setting up a CentOS server with Virtualmin and Postfix, and I am trying to use LDAP to store unix users, groups, Postfix aliases and virtual domains. I am following the instructions from Webmin's site. I have created an LDAP domain and configured Postfix to fetch Aliases and Virtual Domains from LDAP, but in order to do so I had to configure postfix to authenticate with the master LDAP account, cn=Manager,dc=mydomain,dc=com. This seems like a terrible idea because that account has access to the Users and Groups, which postfix does not need access to. How can I create a new LDAP account for Postfix which only has access to the LDAP trees Postfix needs?

    Read the article

  • Re-assembling the RAID-5 array reboots my CentOS-5 machine

    - by xraminx
    I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

    Read the article

  • Need help solving "Disk Error Press any key to restart" after blue screen in XP.

    - by Dennis
    I have had a couple of BSOD's lately and after the last one I got the disk error message. The disk shows up during the BIOS portion of the boot. It is in a Dell Precision 690 so the F12 key gives me a boot menu. I can boot from the utility partition, and if I specifically select the hard drive from the boot menu it will boot fine. Any ideas why if I just try to do an unattended boot, it give the error listed in the title?

    Read the article

  • My PC becomes very slow after changing page file in XP.

    - by Jane
    Hello there, I have 5 partitions in my computer (C, D, E, F, G), and C: is the system partition. Recently I changed the page file setting to use 768-768 MB from the G:, without changing the C: default value (256-512 MB). Everything runs fine until I rebooted my PC. I unset the G:'s page file before I rebooted my PC. Well, after I rebooted my PC, my XP becomes VERY slow. damn slow. I don't know how long I wasted to wait for the boot screen to disappear. (Well, maybe about 1-3 mins. Normally it is under 10 secs) and when I tried to enter the desktop, it just like using a computer without a VGA card, or VGA driver installed. Very slow. Any suggestions to fix this problem? Because I hate to repair-install my XP =\ Thanks.

    Read the article

  • OpenAFS on Fedora/CentOS

    - by Michael Pliskin
    I am trying to see if OpenAFS fits my needs as a distributed filesystem and is a bit stuck. There are docs but they're all quite hard to understand, so asking for some expert advice here. My questions: which version to install? I need windows client support so I need 1.5 - right? But it is not stable.. Or is it? And don't see any pre-built rpms for it, so compiling from sources? tried to compile and it worked but it created a non-"mp" kernel module while my kernel needs an mp one - how to workaround that? do I really need a new fresh partition to start with or I can re-use an existing one and just make it available via afp? any nice HOWTOs around?

    Read the article

  • Linux Software RAID: How to fsck on hard drive?

    - by Rick-Rainer Ludwig
    We have a Linux server running with Software RAID1. We see some issues in /var/log/messages like: unreadable sector. I want to perform a complete fsck on the drive to get some more information, but a fsck /dev/md0 brings a clean due to the Software RAID layer in between. How can I check the real hard drive? Do I need to disassemble the whole RAID? How do I deal with the inconsistency in the partition due to the additional Software RAID header? Does anyone have a good idea for this?

    Read the article

  • Is it possible to mount a TrueCrypt volume to a NTFS mount point?

    - by Anthony
    The question is simple really. Under Linux etc.. you can mount TrueCrypt volumes, files or partitions, to any mount point of your choosing whereas in Windows the interface only shows drive letters. I'm wondering if I can mount the volume, a partition in this case, un-encrypted to a NTFS mount point, or folder, instead of using drive letters. The reason I ask is I am running out of letters :(. I'm using Server 2008 with the latest TrueCrypt install. Note: I know how to mount a volume directly to an NTFS folder mount point but doing so, and navigating to the mount point, prompts a notice saying the volume is not formatted - to be expected as the volume is not un-encrypted at this stage.

    Read the article

  • Fix for OpenSolaris with no gcc vs. Nexenta with no ext3

    - by Jake Wharton
    I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

    Read the article

  • mail server administration

    - by kibs
    MY postfix does not show that it is listening to the smtp daemon getting mesaage below: The message WAS NOT relayed Reporting-MTA: dns; mail.mak.ac.ug Received-From-MTA: smtp; mail.mak.ac.ug ([127.0.0.1]) Arrival-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Original-Recipient: rfc822;[email protected] Final-Recipient: rfc822;[email protected] Action: failed Status: 5.4.0 Remote-MTA: dns; 127.0.0.1 Diagnostic-Code: smtp; 554 5.4.0 Error: too many hops Last-Attempt-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Final-Log-ID: 23434-08/A38QHg8z+0r7 undeliverable mail MTA BLOCKED OUTPUT FROM lsof -i tcp:25 command master 3014 root 12u IPv4 9429 TCP *:smtp (LISTEN) (Postfix as a user is missing )

    Read the article

  • Windows XP waits for usb drive on almost every operation.

    - by Tomasz Kowalczyk
    Hello everyone, I have a problem with my Windows XP operating system, particularly with the USB device that is plugged in - 1TB WD My Book external drive. I haven't found any information about such behaviour when searching in Internet, so I have to ask You. The problem is: when I am using computer, especially during work (programming), when I try to access any information on a hard disk ("internal" one), Windows seems to "consult" it with the external drive. For example, when I open file selection dialog window, if I try to change directory, system activates external drive, reads something (I hear the disk's operational noise) and after some seconds of such pause it makes the operations I requested. There are many situations in which I can reproduce this behavior - opening My Computer, shutting down system, opening partition folder from My Computer - every operation involves the usage of external drive. Please understand me properly - this is not something that happens EVERY time, but at least "many" times a day. What causes such behavior and how can I "turn off" external drive when it's not needed? Thanks in advance for your answers.

    Read the article

  • Need help diagnosing cause of BSOD

    - by n00neimp0rtant
    I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

    Read the article

  • What files should be excluded from a complete Windows backup?

    - by tro
    I'm starting to use CrashPlan to backup my Win 7 PC. I've got it writing to my external HD (for quick local restores) and to CrashPlan Central (for offsite storage). I'd like to backup my entire C:\ drive (the only partition) in a way that: Preserves all of my installed software and configuration, but Avoids backing up log files and other ephemeral / temporary files that are regenerated during normal operation of the OS. Which files and/or directories should I be excluding from backups? I'd like to make this a community wiki, so that we could all contribute towards a definitive list. Here's a list of regular expressions identifying the directories and files that CrashPlan excludes on Windows by default listed at http://support.crashplan.com/doku.php/articles/admin_excludes: .*/(?:42|\d{8,})/(?:cp|~).* (?i).*/CrashPlan.*/(?:cache|log|conf|manifest|upgrade)/.* .*\.part .*/iPhoto Library/iPod Photo Cache/.* .*\.cprestoretmp.* *\.rbf :/Config\\.Msi.* .*/Google/Chrome/.*cache.* .*/Mozilla/Firefox/.*cache.* .*\$RECYCLE\.BIN/.* .*/System Volume Information/.* .*/RECYCLER/.* .*/I386.* .*/pagefile.sys .*/MSOCache.* .*UsrClass\.dat\.LOG .*UsrClass\.dat .*/Temporary Internet Files/.* (?i).*/ntuser.dat.* .*/Local Settings/Temp.* .*/AppData/Local/Temp.* .*/AppData/Temp.* .*/Windows/Temp.* (?i).*/Microsoft.*/Windows/.*\.log .*/Microsoft.*/Windows/Cookies.* .*/Microsoft.*/RecoveryStore.* (?i).:/Config\\.Msi.* (?i).*\\.rbf .*/Windows/Installer.* Other excludes: .*\.(class|obj) .*/hiberfil.sys (?i).*\.tmp (?i).*/temp/ (?i).*/tmp/ .*Thumbs\.db .*/Local Settings/History/ .*/NetHood/ .*/PrintHood/ .*/Cookies/ .*/Recent/ .*/SendTo/

    Read the article

  • What could explain my partitions disappearing on a new SSD with Windows 7?

    - by charlesrandall
    So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

    Read the article

  • How do boot sectors and multiple drives works?

    - by GiH
    I don't fully understand the concept of a boot sector, I was hoping someone could clear this up for me. If you have two hard drives, with an OS installed on each, does each drive have its own boot sector? Does each drive need an MBR partition? I've got Linux and Windows on two separate drives. I've had issues when installing Linux and grub, and now I've finally decided to use the Windows bootloader to start up. Would Windows have gotten rid of grub when i used /fixmbr or does it stay there on the boot sector of the other drive?

    Read the article

  • How to locate chrome bookmarks in linux

    - by xenon
    I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

    Read the article

  • XEN disk mapping problem under opensolaris

    - by Louis
    I have a system with two harddisks, i wanted to use the simplicity of ZFS for my file server and i also need to run a linux. I choosed XEN virtualization for that, supported on both system. My GRUB is well configured and i can boot both system. I would like is to run both system with solaris as a dom0 and the debian installed on the 2nd HD as a virtual machine. My problem is that i want to use the partitions of my 1st harddisk (sda1 under linux) and it does not work. I didn't find my use case on the web- Here is my Opensolaris device name of this partition : /dev/rdsk/c7d0p1 But when i use : disk = [ 'phy:rdsk/c7d0p1,sda1,w' ] as a disk mapping in my XEN configuration file i have the error : Error: Device 2049 (vbd) could not be connected. error: "rdsk/c7d0p1" is not a valid block device. I am "lost".

    Read the article

  • How do I setup unison to sync a folder one way

    - by Rob
    I have a 1tb NAS that has a 1tb usb external hard attached I have prepared the file system on the usb disk and mounted it I want to 100% sync my data from my nas to the usb disk - but I want it to be incremental and only have the NAS as the 'master' - eg if a file changes on the usb external hard drive I want it to ignore this change as its not the live version (not that I think the files will change on the usb disk but im paranoid the live could get overwritten) Also if a file gets deleted on live I want to retain the deleted file on the usb disk Can unison sync one-way and achive the above for me? if so with simply unison sorce/ target/ Work? Thanks Rob

    Read the article

  • Asp.net with RegularExpression problem

    - by Eyla
    Greetings, I'm try to do valdation textbox input to valdate a phone number. I have a asp.net textbox and checkbox. the defualt is to validate a us phone number and when I check the checkbox I should change the RegularExpression and error message to validate an international phone using my own RegularExpression. I have no problem to validate the international phone but the problem is when validating the usa phone number I'm always getting error message that it is invalde phone number. I used diffrent RegularExpression but did not work. Please look at my code and davice me. Regards, ! ..................... ASP.net Code ..................... <%@ Page Language="C#" MasterPageFile="~/Master.Master" AutoEventWireup="true" CodeBehind="UpdateContact.aspx.cs" Inherits="IMAM_APPLICATION.UpdateContact" Title="Untitled Page" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <script src="js/jquery-1.4.1-vsdoc.js" type="text/javascript"></script> <script src="js/jquery.validate.js" type="text/javascript"></script> <script src="js/js.js" type="text/javascript"></script> <script type="text/javascript"> $(document).ready(function() { ValidPhoneHome("#<%= chkIntphoneHome%>"); $("#aspnetForm").validate({ // debug: true, rules: { "<%=txtHomePhone.UniqueID %>": { phonehome: true } }, errorElement: "mydiv", wrapper: "mydiv", // a wrapper around the error message errorPlacement: function(error, element) { offset = element.offset(); error.insertBefore(element) error.addClass('message'); // add a class to the wrapper error.css('position', 'absolute'); error.css('left', offset.left + element.outerWidth()); error.css('top', offset.top - (element.height() / 2)); } }); }) </script> <div id="mydiv"> <asp:CheckBox ID="chkIntphoneHome" runat="server" Text="Internation Code" Style="position: absolute; top: 620px; left: 700px;" onclick=" ValidPhoneHome(this)" /> <asp:TextBox ID="txtHomePhone" runat="server" Style="top: 650px; left: 700px; position: absolute; height: 22px; width: 128px" ></asp:TextBox> </div> </asp:Content> ............................. js.js File ................... var RegularExpression; var USAPhone = /(^[a-z]([a-z_\.]*)@([a-z_\.]*)([.][a-z]{3})$)|(^[a-z]([a-z_\.]*)@([a-z_\.]*)(\.[a-z]{3})(\.[a-z]{2})*$)/i; var InterPhone = /^\d{9,12}$/; var errmsg; function ValidPhoneHome(sender) { if (sender.checked == true) { RegularExpression = InterPhone; errmsg = "Enter 9 to 12 numbers as international number"; } else { RegularExpression = USAPhone; errmsg = "Enter a valid number"; } jQuery.validator.addMethod("phonehome", function(value, element) { return this.optional(element) || RegularExpression.test(value); }, errmsg); }

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >