Search Results

Search found 8770 results on 351 pages for 'sun zfs storage 7000 appl'.

Page 240/351 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• How to copy directories using debugfs?

  - by tjbp

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• Retrieving a specific value from “df -h” using shell

  - by diegodias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

  Read the article

• JSF : able to do mass update but unable to update a single row in a datatable

  - by nash

  I have a simple data object: Car. I am showing the properties of Car objects in a JSF datatable. If i display the properties using inputText tags, i am able to get the modified values in the managed bean. However i just want a single row editable. So have placed a edit button in a separate column and inputText and outputText for every property of Car. the edit button just toggles the rendering of inputText and outputText. Plus i placed a update button in a separate column which is used to save the updated values. However on clicking the update button, i still get the old values instead of the modified values. Here is the complete code: public class Car { int id; String brand; String color; public Car(int id, String brand, String color) { this.id = id; this.brand = brand; this.color = color; } //getters and setters of id, brand, color } Here is the managed bean: import java.util.ArrayList; import java.util.List; import javax.faces.bean.ManagedBean; import javax.faces.bean.RequestScoped; import javax.faces.component.UIData; @ManagedBean(name = "CarTree") @RequestScoped public class CarTree { int editableRowId; List<Car> carList; private UIData myTable; public CarTree() { carList = new ArrayList<Car>(); carList.add(new Car(1, "jaguar", "grey")); carList.add(new Car(2, "ferari", "red")); carList.add(new Car(3, "camri", "steel")); } public String update() { System.out.println("updating..."); //below statments print old values, was expecting modified values System.out.println("new car brand is:" + ((Car) myTable.getRowData()).brand); System.out.println("new car color is:" + ((Car) myTable.getRowData()).color); //how to get modified row values in this method?? return null; } public int getEditableRowId() { return editableRowId; } public void setEditableRowId(int editableRowId) { this.editableRowId = editableRowId; } public UIData getMyTable() { return myTable; } public void setMyTable(UIData myTable) { this.myTable = myTable; } public List<Car> getCars() { return carList; } public void setCars(List<Car> carList) { this.carList = carList; } } here is the JSF 2 page: <?xml version='1.0' encoding='UTF-8' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core"> <h:head> <title>Facelet Title</title> </h:head> <h:body> <h:form id="carForm" prependId="false"> <h:dataTable id="dt" binding="#{CarTree.myTable}" value="#{CarTree.cars}" var="car" > <h:column> <h:outputText value="#{car.id}" /> </h:column> <h:column> <h:outputText value="#{car.brand}" rendered="#{CarTree.editableRowId != car.id}"/> <h:inputText value="#{car.brand}" rendered="#{CarTree.editableRowId == car.id}"/> </h:column> <h:column> <h:outputText value="#{car.color}" rendered="#{CarTree.editableRowId != car.id}"/> <h:inputText value="#{car.color}" rendered="#{CarTree.editableRowId == car.id}"/> </h:column> <h:column> <h:commandButton value="edit"> <f:setPropertyActionListener target="#{CarTree.editableRowId}" value="#{car.id}" /> </h:commandButton> </h:column> <h:column> <h:commandButton value="update" action="#{CarTree.update}"/> </h:column> </h:dataTable> </h:form> </h:body> </html> However if i just keep the inputText tags and remove the rendered attributes, i get the modified values in the update method. How can i get the modified values for the single row edit?

  Read the article

• Sync Windows Live Mail between two computers

  - by Jesper

  Hi, I have a laptop where I have been using Windows Live Mail as my email application for the last year. Yesterday I got a dell desktop as well and I am desperatly trying to set up so my desktop and laptop sync the email between each other. Im using Super Flexible Synchronizer to sync the email storage folder to a NAS on my network, so when setting up the desktop naturally I set it up to download all from the NAS. But each time I open Windows Live Mail on the new machine, some emails suddenly come in duplicates, one is read, the other is not. I have ran through the registry on the new machine and updated an ID i found, in 3 places, one being: C:\Users\\AppData\Local\Microsoft\Windows Live Contacts{blah blah blah}\DBStore\contacts.edb Still doesnt seem to be enough. Does anyone have any tips or ideas how to sync Windows Live Mail between two computers without duplicates and weird behaviour etc. grateful for your help, jesper

  Read the article

• Is using Capistrano for user maintenance tasks on university lab feasible?

  - by danielkza

  I've been looking around for tools to replace some legacy scripts for creating and maintaining accounts in a university computer lab ecosystem consisting of things like: LDAP and Kerberos for authentication User home storage and web pages Entries on an SQL database Printing quotas Mailing lists, etc. I'd also like to automate machine and VM membership for Kerberos and Puppet if possiible. I've found Capistrano, and while the basic principle of running tasks on remote hosts through SSH seems to fit, and the DSL in Ruby looks quite nice, I've found most documentation is related to application deployment, not generic tasks. I'm also not aware of any good way to parameterize tasks so I can pass on the user information for creation. Is something about Capistrano I am missing, or is it not the correct tool for this job? Are there any more userful alternatives?

  Read the article

• Incremental backups in Quickbooks 2005

  - by Nathan DeWitt

  My church uses Quickbooks 2005. They have a backup to a 512 MB thumbdrive. They have been backing up about every week for the past 18 months. The filesize of the backups have grown from 14 MB to about 23 MB. I was planning on giving them a 1 or 2 GB thumb drive and calling it a day, but when I dumped this info into Excel and projected out the growth rate, I found that we'll hit 1 GB in July, and 10 GB in about another 18 months, and then 100 GB about 18 months after that. It looks to me like Quickbooks saves all the transactions with every backup. Is there a way to force incremental backups? If this is the way it is, that's fine, but I'd rather not keep buying another order of magnitude of storage space every 18 months. Can I safely delete the previous backups, and just keep the recent 2 or 3 months worth? Thanks.

  Read the article

• Setting Sql server security rights for multiple situations

  - by DanDan

  We have an application which uses an instance of Sql Server locally for its backend storage. The administrator windows login has had its sysadmin right revoked, and instead two sql logins have been created; one for the application with a secret password and one read only login we let users view the raw data with. This was working fine until we moved on FileStreams, which requires intergrated windows authentication. So now the sql server logins must be replaced. As a result, I am now reviewing all of our logins but I am not sure how it is possible. It seems that the application needs full read/write access, yet I still need to lock down writing to the tables so the user cannot login into the database and delete data randomly. Does anyone have any tips for setting multiple levels of security using intergrated windows logins, or can you direct me to any further reading? Thanks.

  Read the article

• Alternative to SecondCopy?

  - by overtherainbow

  Hello I've been using SecondCopy (7.0.0.146) on XP for a few years now to copy important files from one hard-disk to another. One thing that bothers me is that it is unable to copy some files that are open. I assume Windows provides an API that allows an application to put an exclusive lock on an open file and backup utilities like SecondCopy just can't access them until they are closed. As a result, since I have to close a bunch of files/applications for SecondCopy to complete successfully, I typically don't run SecondCopy regularly like I should... which pretty much beats the whole purpose of backing up data :-/ For those of you using a similar solution to back up your important file onto a second mass storage solution... Can you confirm that an open file can be set off-limit with an exclusive lock, and no backup solution will work with those? If you've tried SecondCopy and other solutions recently and you ended up using another solution, which one did you choose and why? Thank you for any feedback.

  Read the article

• Jalopy comments indentation

  - by Neil Wightman

  Hi All. We use jalopy to format our code to the sun standard (well 99%). I have 1 issue with it. It keeps moving comments to the right of the line. E.g // Panel "JPanel.border", new LazyValue(packageName + "PanelBorder"), //frozen // Button "Button.background", new ColorUIResource(251, 251, 251), //frozen "Button.foreground", new ColorUIResource(0, 0, 0), //frozen But jalopy always moves the // Button to the far right. // Panel "JPanel.border", new LazyValue(packageName + "PanelBorder"), //frozen // Button "Button.background", new ColorUIResource(251, 251, 251), //frozen "Button.foreground", new ColorUIResource(0, 0, 0), //frozen Is there any way to stop this? Thanks Neil

  Read the article

• Run a JGNAT program?

  - by anta40

  I just installed JGNAT on Windows (gnat-gpl-2010-jvm-bin.exe) This is a sample code hello.adb from the included manual: with Ada.Text_IO; use Ada.Text_IO; procedure Hello is begin Put_Line ("Hello GNAT for the JVM."); end Hello; First, compile it: jvm-gnatmake hello.adb jvm-gnatcompile -c hello.adb jvm-gnatbind -x hello.ali jvm-gnatlink hello.ali Looks fine. So let's run it: java hello Exception in thread "main" java.lang.NoClassDefFoundError: jgnat/adalib/GNAT_libc at hello.main(hello.adb) Caused by: java.lang.ClassNotFoundException: jgnat.adalib.GNAT_libc at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) ... 1 more Any idea why?

  Read the article

• HP ProLiant Smart Array "lock up" code 0x11

  - by ewwhite

  I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

  Read the article

• Western Digital My Book World drops off network

  - by Macha

  Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

  Read the article

• What is the point of JComboBox's getSelectedItem()?

  - by Chris Cooper

  I just read the JavaDoc for JComboBox (I promise I have a life... I wasn't reading through for fun. =P), and I think the problems I'm having with my program can be attributed to the getSelectedItem() method. The documentation says: Returns the current selected item. If the combo box is editable, then this value may not have been added to the combo box with addItem, insertItemAt or the data constructors. If you can't get values that were added with those methods or with the constructor, of what use is the method? And how can I get the value from an "editable" JComboBox? Link to JavaDoc: http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JComboBox.html#getSelectedItem()

  Read the article

• Skipping hardlinks when using TSM Backup

  - by Lars Haugseth

  We need to backup a filesystem with lots of hardlinks. Since there are several hardlinks for each "true" file, we would like to skip all the hardlinks when backing up the filesystem to avoid n exact copies of each file. The backup is done using Tivoli Storage Manager Backup, and we've been unable to get it to treat hardlinks as anything other than separate files to be backed up alongside each other. In case it's relevant for possible solutions, I'd like to note that it's possible to tell a hardlink from a proper file by the filename: foobarbaz-123.ext # file foobarbaz-123-1.ext # hardlink foobarbaz-123-2.ext # hardlink barbazfoo-456.ext # file barbazfoo-456-1.ext # hardlink barbazfoo-456-2.ext # hardlink barbazfoo-456-3.ext # hardlink That is, all hardlinks have two hyphens in the filename, where as proper files have just the one. The server is running Ubuntu Linux, and the files are situated on a gfs volume on our SAN.

  Read the article

• rsync to windows (cygwin)

  - by abergmeier

  We have a windows file storage (don't ask) and now I want to rsync with the machine from Windows, Mac and Linux. So I installed freeSSHd (login shell is set to C:/cygwin64/bin/sh.exe), set up certificates and testing from Linux the test.dat has 0 bytes: ssh myuser@winmachinename "C:/cygwin64/bin/true.exe" > test.dat Even double checking with actual output works fine: ssh myuser@winmachinename "C:/cygwin64/bin/ls.exe" > test.dat Now, when I call rsync: rsync --progress -avz -e ssh myuser@winmachinename:/c/Users ~/test it fails with: protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(174) [Receiver=3.1.0] As far as reading the docs, this should not happen, when the first test is successful!? I am by now out of ideas - any recommendations how to debug this? EDIT: | OS | rsync version | |:--------------|:------------------------------------------| | Windows | rsync version 3.0.9 protocol version 30 | | Linux | rsync version 3.1.0 protocol version 31 |

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• MS SQL dts to ssis migration error

  - by Manjot

  Hi, I have migrated some DTS packages to SSIS 2005 using "Migration" wizard. When I tried to run it, it fails saying you need a higher version of SSIS even though the destination SSIS server is on 9.0.4211 level. then I digged in the package using business intelligence studio and saw that one of the package subtasks is "Transform data task" (the dts version) and the package fails to run that. The storage location for this dts task is set to "Embedded in Task". I didn't touch it. why didn't it convert this task to an SSIS data flow task? any help please? Thansk in advance

  Read the article

• NFS-Root not working when booting over PXE

  - by Randy

  I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

  Read the article

• How to change default permission for uploaded files in apache with mounted webroot?

  - by faridv

  I have an ubuntu server 11.10 with apache 2.2.20, php 5.3.6 and an installation of Joomla cms. I have used an extra hard disk as my web server storage and mounted it into /data/www/ (I hope it's not where my problem us!). I've set permission of all files and folders in my web root to 755 and user groups for them is set to [default ubuntu user(in my case radio)]:www-data. In past days I had serious problems with joomla not showing new uploaded images and other files and also I can't install any extensions. After hours of searching I found out that uploaded files don't have appropriate permission (they are -rw-------) and Joomla application cannot read, copy or move them after upload. I’m wondering how can I set a default permission so all files that I upload use it? PS: I’ve tested umask but it did nothing. I think it has nothing to do with my problem.

  Read the article

• Inter Widget Communication for iGoogle like portals

  - by bakore

  I was looking for a platform where widgets developed using various technologies like Java can communicate with each other. In other words When I add widgets to an interface I need them to talk to each other. For example A Click event in one widget should trigger an event in some other widget. I have been looking into the web for solutions and ways to do it, but couldnt find anything concrete. Any pointers or information on this would be great. Something like this http://blogs.sun.com/pdblog/entry/inter_widget_communication_in_cross Google also had a gadget to gadget communication API which was deprecated last year.

  Read the article

• Windows 2008 DHCP service fails - "...failed to see a directory server for authorization."

  - by ewwhite

  I have a small environment running Windows 2008 R2 where the DHCP service on the domain controller fails every two weeks. The most-visible error is Event ID 1059 and the Event Viewer message is: "The DHCP service failed to see a directory server for authorization." The setup features two domain controller and the usual services and roles (file, print, Exchange). Restarting the service fails for a variety of reasons. I've had the following messages at different times: "Not enough storage is available to complete this operation". "Unable to determine the DHCP Server version for the Server 192.168.x.x" "The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service." A reboot of the domain controller resolves the issue for ~2 weeks. The systems are virtualized and there are no network connectivity issues. Any ideas what's happening here?

  Read the article

• Advanced file compression software for Mac OSX

  - by Steven Roose

  Back when I used Windows, I always used WinRAR for file compression and decompression. It had a fair amount of options like 'just storage' vs 'hard compression', password protection and archive type. Now that I use Mac OSX, the only compression possibility I have is the default Finder's Compress to Zip. I downloaded the most popular decompression software "Unarchiver". But this app can't compress other archive types either. I went for a search but there seem to be hardly any good advanced compression tools that work nice in OSX and have the options WinRAR has. (WinRAR works in OSX but command line only, I'm looking for something with a GUI.) Any ideas? I strongly prefer freeware. I found Archiver and StiffIt, but they are both commercial.

  Read the article

• How to Use Grizzly Embedded Server for Mule as Well as Jersey

  - by Tim

  I'm currently using JerseyTest w/ Grizzly embedded server to test some code. I do some very simple configuration to point it to the proper resources: Map<String, String> initParams = new HashMap<String, String>(); initParams.put("com.sun.jersey.config.property.packages", "com.sample.service"); ApplicationDescriptor appDescriptor = new ApplicationDescriptor(); appDescriptor.setServletInitParams(initParams); super.setupTestEnvironment(appDescriptor); This works fine and the Jersey components are available and working as expected. I'm now trying to add some Mule functionality to some of these Jersey calls, but Mule is not being properly initialized/configured by Grizzly. Has anyone gotten this kind of setup running? What additional configuration do I need to do with JerseyTest/GrizzlyWebServer to get it to initialize Mule properly?

  Read the article

• How do I access a tomcat 5.5 installation via localhost running on Virtual PC 2007?

  - by MetroidFan2002

  I have a tomcat installation of 5.5 up and running on a Virtual PC with a fresh XP pro SP3. Launching tomcat gives the standard messages: INFO: Find registry server-registry.xml at classpath resource Apr 12, 2010 11:43:44 AM org.apache.catalina.startup.Catalina start INFO: Server startup in 3576 ms However, I cannot for the life of me connect to http://localhost:8080. I've also tried http://127.0.0.1:8080 with no success. This is on the virtual PC itself that I cannot connect to the server - I haven't bothered to try it on the host machine. Can anyone provide any information on why this may be happening? It's a fresh install of tomcat using Sun's JRE 5.0 (I know, EOL, technical requirements make me have to use 5.0 and not a newer JRE).

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >