Search Results

Search found 19625 results on 785 pages for 'local groups'.

Page 242/785 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

  • What is the history of why bytes are eight bits?

    - by DarenW
    What where the historical forces at work, the tradeoffs to make, in deciding to use groups of eight bits as the fundamental unit ? There were machines, once upon a time, using other word sizes, but today for non-eight-bitness you must look to museum pieces, specialized chips for embedded applications, and DSPs. How did the byte evolve out of the chaos and creativity of the early days of computer design? I can imagine that fewer bits would be ineffective for handling enough data to make computing feasible, while too many would have lead to expensive hardware. Were other influences in play? Why did these forces balance out to eight bits? (BTW, if I could time travel, I'd go back to when the "byte" was declared to be 8 bits, and convince everyone to make it 12 bits, bribing them with some early 21st Century trinkets.)

    Read the article

  • Eliminating Windows 7 user tracking registry writes

    - by caffiend
    Windows 7 continues the practice of saving user actions in the registry. I'd like to disable this practice both to avoid reg-file fragmentation and SSD wear, as well as being uncomfortable with programs being able to quickly analyze my usage habits. Even with the "Turn off user tracking" policy enabled, there are at least two areas that still contain user tracking: HKCU\Software\Classes\Local Settings\MuiCache This key stores a cache of most-recently accessed strings, including most-recently ran exe descriptions. MKCU\Software\Classes\Local Settings\Software\Microsoft Windows\Shell\BagMRU This directory stores the most recently viewed folders along with timestamps. Are there additional policy settings/registry entries to disable these writes? If not, is it possible to make these entries Volatile? Would it be practical to create a temporary hive (eg, on ramdisk) and map it over this location?

    Read the article

  • How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

    - by bithacker
    I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

    Read the article

  • Apache equivalent of vsftpd's local_enable

    - by Reinderien
    vsftpd has an option local_enable that allows FTP users to be directly mapped to local users. It even works without any extra effort with our Likewise Active Directory configuration. I've been looking all over, and I can't seem to find an equivalent for Apache .htaccess. The auth providers seem to be file, DBM, LDAP and DBD. None of these seem to allow for HTTP auth user mapping to local user accounts. Is there any way to do this? If not, why not? Thanks.

    Read the article

  • Remote Access to Owncloud Server

    - by John
    I'm currently trying to setup my own own-cloud server, and I've got it fully installed, configured, and accessible from within my own local network. I cannot figure out how to access it from the outside. So far I've: Successfully setup port-forwarding on my local router. I've done so via 'single port forwarding' and 'port range forwarding' Ports 80, 443, 3306 (Apache-Full and MySQL) Successfully obtained my external IP address. I've also tested this magic number from within the network at #insertIPhere/owncloud and it did work. Successfully setup the server using SQLite Successfully setup the server using MySQL Created the following exceptions in my firewall: Allow In Port 80 (Apache Full) Allow In Port 443 (Apache Full) Allow In Port 3306 (MySQL) Tried connecting from several different remote networks, as to troubleshoot something on their end As far as trying to access it, I'm doing so through Google-Chrome and Mozilla Firefox trying to reach the server through #insertIPhere/owncloud using the above public IP address. So what have I missed, and how do I access my server from outside? Thanks in advance for your help and time, and I apologize in advance for what will probably result in my noobish mistake in networking. I've looked at the official documentation. And also this question here.

    Read the article

  • Using gerrit (or similar tool) on a team where multiple devs work on a single feature

    - by Bacon
    We have a team of roughly ~8 devs who regularly work on the same feature over the course of a 3 week sprint. It isn't quite pair programming, but in our current workflow devs regularly push up incomplete code for a colleague to complete. This worked fine before we introduced Gerrit, but now our commits need to represent chunks of test-passing, complete, logical functionality, and so the model breaks. My only idea is to have everybody push up to a separate, untracked branch up until the functionality is ready for review, then squash everything into commits that make sense and push up. Is there another Gerrit-ized workflow that could work? I know this is a widely discussed topic on Google Groups, and that there has recently been some discussion of Gerrit topic reviews, but I wanted to see if there is anybody out there using Gerrit in this way, and what the suggested workflow would be.

    Read the article

  • yum update with shared cache

    - by Sammitch
    We've got a big batch of RHEL6 machines that are due for patching, and for some reason the process here does not involve a local repo. I'm new here, I've asked why, ["it just didn't work"] and I don't have enough time to make it work before the window that's already scheduled. So the usual method is to install yum-downloadonly and run yum update --downloadonly --downloaddir=/mnt/cifs_share and then yum update /mnt/cifs_share/*.rpm which just does not look right to me since not all of these machines have the same set of installed packages. The method I tried today was mounting the share to /var/cache/yum/x86_64/6Server/rhel-x86_64-server-6/packages/ which worked, but then yum automatically deleted everything once it finished. I've looked over the yum man page, but I don't see any flag I can feed it to stop it from deleting everything, nor a flag like up2date's --tmpdir=/mnt/cifs_share. Can anyone out there help me kludge this together until I can get a local repository working?

    Read the article

  • Error when I try to connect to a SQL Server 2005 from the internet

    - by Manish
    My SQL Server is on a local machine. I want to access it through internet. I created a website through I want to connect local SQL Server 2005. This is the error message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Thanks for a reply!

    Read the article

  • SEO, IIS 7 and web.config in subfolder issue

    - by tesicg
    We have ASP.NET application that has sub-folder with .aspx pages and separate web.config file in it. The .aspx pages in that sub-folder behave as separate site. In the web.config file at application level, I set the rule that removing trailing slashes: <rewrite> <rules> <rule name="RemoveTrailingSlashRule1" stopProcessing="true"> <match url="(.*)/$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> </conditions> <action type="Redirect" redirectType="Permanent" url="{R:1}" /> </rule> </rules> </rewrite> I expect this rule will propagate downward to sub-folder as well. To access the site in sub-folder we should type: http://concert.local/elki/ and get it without trailing slash as: http://concert.local/elki But, the trailing slash remains. The web.config file in sub-folder looks as following: <configuration> <system.webServer> <defaultDocument> <files> <add value="Sections.aspx" /> </files> </defaultDocument> </system.webServer> </configuration>

    Read the article

  • Can I copy from vim to another window without +xterm-clipboard?

    - by GorillaSandwich
    I'm using Ubuntu and vim. I can copy text from vim and paste it into another window by highlighting it in vim, then middle-clicking in the other window. This works fine when I'm on my local machine. I can also copy into the system register by highlighting text and yanking to the system register. (For example, Shift-V JJ "+ y to go into linewise visual mode, highlight two lines, select the '+' register and yank.) It's then available to paste into other windows. However, if I ssh into my web host, I can't do either of these. (They use some flavor of Linux - I think it's CentOS.) In vim, if I type :version, my local version shows +xterm_clipboard, but the host's version shows -xterm_clipboard. I don't have sudo rights there. Is there any way to be able to copy from their vim without getting them to tinker with the installation?

    Read the article

  • connection to apache server switches sockets connection

    - by Newben
    I have just post a question but I post an other one because the problem is not the one I had in thought when asking the latter. So, I am running some rails app on osx, when I run rails s, everything works fine. If I shut down the apache server (mamp) and if I run rails s again, I have this message Can't connect to local MySQL server through socket '/Applications/MAMP/tmp/mysql/mysql.sock', which for sure is normal. For info, my mamp server is running, and the connection must pass through /Applications/MAMP/Library/bin/mysql, so I aliased it by setting in my bash profile : alias mysql="/Applications/MAMP/Library/bin/mysql" Now, when I launch a rails generate command type, I get this message : /$root/vendor/bundle/ruby/2.0.0/gems/mysql2-0.3.11/lib/mysql2/client.rb:44:in `connect': Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) (Mysql2::Error) So how it can be ?

    Read the article

  • Load balancers, multiple data centers and url based routing

    - by kunkunur
    There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

    Read the article

  • ideas on multiplayer games which include lots of collaboration?

    - by user494461
    For my master thesis I wanted to design a small multiplayer game which includes more than one player(maybe 5), has 2-3 players collaborating at a time to achieve some task. The most important thing is realistic simulation of the movable objects in the scene which more than one player should simultaneously interact with. I would also prefer large virtual environments (VEs) like mmogs where groups of players are interacting in different areas of the VE. tasks for players should include 2-3 players touching movable objects at same time. e,g, a very basic task can be users lifting a cube together and pushing it through a hole I am not new to designing virtual environments with openGL, but have never designed games before and rarely play other than few of my favorite ones like Fifa. I wanted some ideas on what kind of games should I look at which should help me with ideas for my tasks for the users to gain points and win in games? any current indie games which might inspire me?

    Read the article

  • Copying a large directory tree locally? cp or rsync?

    - by Rory
    I have to copy a large directory tree, about 1.8 TB. It's all local. Out of habit I'd use rsync, however I wonder if there's much point, and if I should rather use cp. I'm worried about permissions and uid/gid, since they have to be preserved in the clopy (I know rsync does this). As well as thinks like symlinks. The destination is empty, so I don't have to worry about conditionally updating some files. It's all local disk access, so I don't have to worry about ssh or network. The reason I'd be tempted away from rsync, is because rsync might do more than I need. rsync checksums files. I don't need that, and am concerned that it might take longer than cp. So what do you reckon, rsync or cp?

    Read the article

  • Grouping IP Addresses based on ranges [on hold]

    - by mustard
    Say I have 5 different categories based on IP Address ranges for monitoring user base. What is the best way to categorize a list of input IP addresses into one of the 5 categories depending on which range it falls into? Would sorting using a segment tree structure be efficient? Specifically - I'm looking to see if there are more efficient ways to sort IP addresses into groups or ranges than using a segment sort. Example: I have a list of IP address ranges per country from http://dev.maxmind.com/geoip/legacy/geolite/ I am trying to group incoming user requests on a website per country for demographic analysis. My current approach is to use a segment tree structure for the IP address ranges and use lookups based on the structure to identify which range a given ip address belongs to. I would like to know if there is a better way of accomplishing this.

    Read the article

  • not able to upload files into mediawiki -- weird one

    - by Michael
    Completely frustrating me. When I try and upload a small jpeg file I get the following error: Warning: wfMkdirParents: failed to mkdir "/usr/local/mediawiki-1.20.5/images/5/5d" mode 0777 in /usr/local/mediawiki-1.20.5/includes/GlobalFunctions.php on line 2546 CentOS 6.4 MediaWiki 1.20.5 PHP 5.5.0RC1 (apache2handler) MySQL 5.5.31 php.ini safe_mode = off; file_uploads = On max_file_uploads = 20 localsettings.php $wgEnableUploads = true; $wgUseImageMagick = true; $wgImageMagickConvertCommand = "/usr/bin/convert"; images folder chown apache:apache images/ chmod 755 -R images/ (threw error) chmod 777 -R images/ (threw error) I've restart apache and still cannot upload. I'm stumped. Any ideas?

    Read the article

  • /usr/bin/mandb: can't search directory

    - by tfe
    Today I got this email from my debian server: test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) /etc/cron.daily/man-db: /usr/bin/mandb: can't search directory /usr/local/share/man/man1/: Permission denied Can me tell somebody what does it mean? I didn't change any permissions: drw---S--- 2 root staff 4096 Jun 28 14:05 man1 P.S Directory /usr/local/share/man/man1 contains 1 file: csf.1. Yesterday (Jun28) CSF/LFT was updated automatically. How do I fix this problem?

    Read the article

  • Lost connectivity after configuring multiple network adapters on separate networks

    - by Dave Long
    I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • overload environment

    - by Richo
    I've recently switched across to nesting my home directory across all my machines in an svn repo, meaning that my utility scripts, configuration (irssi, vim, zsh, screen etc) as well as my .profile and so forth are easier to keep up to date across all the places I login. I use a set of sourced .local files to override them on a per site basis as required. As it stands, many of my scripts inherit some form of configuration, and for the most part I've been setting an environment variable in .profile, and then if needed on a per site basis overriding it in .profile.local This works great, but are there pitfalls in having a stack of environment variables? If I take my default environment from within an X session before any of my personal configuration I have not even increased it by 50% but some of the machines I work on are low resource, am I bloating my system unneccessarily, or being needlessly paranoid? Should I start moving this config into seperate flatfiles that are loaded as needed? This means extra infrastructure, or alternately writing a single module for storing config that all of my utilities can inherit.

    Read the article

  • network path not found error on creating schtasks

    - by user50273
    I am getting "ERROR: Network path was not found" when I try to create a scheduled task on my local machine. I am using this command at the command prompt: schtasks /tn taskname /tr taskpath /sc minute /mo 20 /sd 09/23/2010 /s \\%computername% /u username /p password When I give the above command without computername, username and password the task gets created perfectly fine. What am I doing wrong?? EDIT : I got it working by using the below command. I do not understand why it is working becuase I am using /ru and /rp which are remote user and remote password settings whereas I am executing the command on my local machine. And I had to give double quotes to computername. schtasks /tn taskname /tr taskpath /sc minute /mo 20 /sd 09/23/2010 /s "%computername%" /ru username /rp password

    Read the article

  • How to set Outlook 2010 to use signatures outside of the default signature folder?

    - by Gregory MOUSSAT
    With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login.

    Read the article

  • Oracle 11g network configuration

    - by Kylo
    Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

    Read the article

  • July 7th - Java 7th launch

    - by alexismp
    Java 7 is around the corner and Oracle is hosting a multi-city launch event on July 7th called "Java 7, Moving Java Forward". This event will be held simultaneously in Oracle HQ (Redwood Shores, CA), in Sao Paulo, Brazil and in London UK to celebrate to almost-ready version 7 of Java, the first one in five years! In addition to the live event and the ability for you to attend in person if you're in one of those cities, many Java User Groups are planning Java 7 meetings on the same day or soon after, so check your favorite JUG's upcoming meetings. Chances are there's a Java 7 event nearby. Tori has all the details for this launch event over on the OTN blog. Register directly here.

    Read the article

  • Where can I learn about managing domain names for my websites? [closed]

    - by Shahbaz
    [I originally asked this question on serverfault.com, where it was closed as 'out of scope.' Hopefully it is appropriate for this forum] I am a developer who doesn't understand how to effectively manage Internet domain names. Say I registered a name with namecheap and host a website on linode. Now what is an a-record? What is a name server and do I host it with namecheap of linode? Why would I pay amazon when others are free? Does any of this matter in terms of website latency or reliability? I feel like a script kiddy, copying and pasting others' and hoping it works. Is there a book or other resource that explains all this? I know amazon is full of books about DNS, but afaik they are about setting up DNA servers for local networks, not the Internet. p.s. To emphasize, I'm asking for books or long write-ups which explain this to technically competent people, who just haven't had to think about the role of commercial registrars, name servers, commercial hosts, commercial websites and how all parts play together on the real internet (not local networks).

    Read the article

  • No remote access to PostgreSQL db

    - by gattol
    i'm stuck in connecting to a PostresSQL database from remote host. The server is accepting incoming connections on port 5432 and i've configured pg_hba.conf like this: local all all md5 host all all 0.0.0.0/0 md5 and the postgresql.conf like this: listen_addresses = '*' port = 5432 max_connections = 100 I don't have any problem accessing from local but when i try to connect via psql with something like this: psql -U myuser -h hostname db_name I get this error: psql: FATAL: no pg_hba.conf entry for host "87.zz.yy.xxx", user "myuser", database "db_name", SSL off I also tried to put the host 87.zz.yy.xxx in the pg_hba.conf file without success.

    Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >