Search Results

Search found 60942 results on 2438 pages for 'help'.

Page 244/2438 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • IP route ppp0 + eth0 access to outside network

    - by Vitor
    I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

    Read the article

  • Rogue program disabled access to Firefox's "Get add-ons" and "Extensions". How can I get them back?

    - by Eric
    After installing a program called "FreeFileViewer", the program disabled access to Firefox's "Get add-ons" and "Extensions" options. To make matters worse, it installed the Yahoo! toolbar that I now can't remove (because it disabled Firefox's options to do so). Please help. Any advice you can give me to restore these Firefox options would be greatly appreciated! BTW, I am running Firefox 15.0.1 on a Windows 7 machine. Thanks, in advance, for your help! -- Eric

    Read the article

  • I can't get router and switches configured properly for my home office network

    - by BernicusMaximus
    Networking Gurus, I recently built a new detached garage, with an office above. As such I had it tied into my existing home ethernet wiring. The ethernet signal is coming into the garage just fine, but I can not get my network configured the way I want because of problems trying to link the various router/switch devices. Please see the following links for the network diagrams: Home Network So basically, I can't my future state to work. I'm not sure if I'm using incompatible switches or what, but I tried the future state with some 4 port switches from best buy and had no luck. I resorted to setting up the Current State so I could operate. What I am looking for is help on how best to get my future state to work. Is this possible with my current configuration, and if not, what should I do? Any help is appreciated. Thanks, Bernie

    Read the article

  • Router stopping my python server

    - by drfrev
    This was originally posted in stackoverflow.com but it was suggested I move it here after it was realized it wasn't my code that was wrong. So my problem, very simply, is that I cannot get my computers that are connected to my router to communicate. example: If I ping a wireless computer I get no responce and the Request times out If I ping a computer wired to the modem directly it works fine. When I ping I use the local ip for each case. *if it helps my original post is here: http://stackoverflow.com/questions/12593024/python-cannot-go-over-internet-network/12593361#12593361 And some screen shots of different things are here: http://imgur.com/a/jUZ4G#3 thank you, any help is greatly appreciated. NOTE I am heading off to bed now, so I will respond around 6:00 AM EST if anyone posts some help

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • Can't set 1280x1024 on Ubuntu with Nvidia Geforce 8400 GS

    - by torbengb
    Ubuntu doesn't offer 1280x1024 but that's what my monitor has -- I want to set that resolution but need help doing so. Ubuntu offers 1360x768, 1152x864, 1024x768 when using the Nvidia driver version 180. This is Ubuntu 9.04 installed as "Wubi" through Windows, I believe it's the amd64 version. Google gave me this precise explanation which is complete latin to me; I'm a Windows guy and not familiar with Terminal. These SU questions also don't provide answers, hence this new question. I hope you can help, and I will provide additional info if required.

    Read the article

  • Cannot boot into Lucid Lynx

    - by xenon
    I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

    Read the article

  • Cant access a remote server due mistake by setting firewall rule

    - by LMIT
    I need help due a my silly mistake! So for long time i have a dedicate server hosted by register.it Usually i access remotly to this server (Windows 2008 server) by Terminal Server. Today i wanted to block one site that continually send request to my server. So i was adding a new rule in the firewall (the native firewall on windows 2008 server), as i did many time, but this time, probably i was sleeping with my brain i add a general rules that stop everything! So i cant access to the server anymore, as no any users can browse the sites, nothing is working because this rule block everything. I know that is a silly mistake, no need to tell me :) so please what i can do ? The only 1 thing that my provider let me is reboot the server by his control panel, but this not help me in any way because the firewall block me again. i have administrator username and password, so what i really can do ? there are some trick some tecnique, some expert guru that can help me in this very bad situation ? UPDATE i follow the Tony suggest and i did a NMAP to check if some ports are open but look like all closed: NMAP RESULT Starting Nmap 6.00 ( http://nmap.org ) at 2012-05-29 22:32 W. Europe Daylight Time NSE: Loaded 93 scripts for scanning. NSE: Script Pre-scanning. Initiating Parallel DNS resolution of 1 host. at 22:32 Completed Parallel DNS resolution of 1 host. at 22:33, 13.00s elapsed Initiating SYN Stealth Scan at 22:33 Scanning xxx.xxx.xxx.xxx [1000 ports] SYN Stealth Scan Timing: About 29.00% done; ETC: 22:34 (0:01:16 remaining) SYN Stealth Scan Timing: About 58.00% done; ETC: 22:34 (0:00:44 remaining) Completed SYN Stealth Scan at 22:34, 104.39s elapsed (1000 total ports) Initiating Service scan at 22:34 Initiating OS detection (try #1) against xxx.xxx.xxx.xxx Retrying OS detection (try #2) against xxx.xxx.xxx.xxx Initiating Traceroute at 22:34 Completed Traceroute at 22:35, 6.27s elapsed Initiating Parallel DNS resolution of 11 hosts. at 22:35 Completed Parallel DNS resolution of 11 hosts. at 22:35, 13.00s elapsed NSE: Script scanning xxx.xxx.xxx.xxx. Initiating NSE at 22:35 Completed NSE at 22:35, 0.00s elapsed Nmap scan report for xxx.xxx.xxx.xxx Host is up. All 1000 scanned ports on xxx.xxx.xxx.xxx are filtered Too many fingerprints match this host to give specific OS details TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 ... ... ... 13 ... 30 NSE: Script Post-scanning. Read data files from: D:\Program Files\Nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 145.08 seconds Raw packets sent: 2116 (96.576KB) | Rcvd: 61 (4.082KB) Question: The provider locally can access by username and password ?

    Read the article

  • How share internet connection between two laptops

    - by danielgratzz
    I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

    Read the article

  • Removing a custom vim configuration

    - by Hovercouch
    I've added a lot of small mappings to my vimrc that help me work, like noremap H ^ and inoremap jk <esc>. It's diverged enough from vanilla vim that other people at work have trouble coding on my computer. This has been making it harder to pair program with people and get help reviewing code. What I'd like is a way to quickly toggle on/off all of my custom mappings and switch between my vim config and a more 'conventional' one (like relative vs absolute numbering). What would be the best way to do this?

    Read the article

  • Profiles and using the local profile for a domain user

    - by Harry
    I’m having some trouble with profiles and would like to reach out for some help. I’ve tried to do some research to help myself along, but I’m not making much progress on my own. I’ve pretty much taken over the sys admin duties for my small lab, I don’t have much experience to justify it besides I’m the only with the time and dedication to go at it (The environment was in a state of disrepair). My network and domain I look over are extremely small by most standards, about 10 users at a time. They are pretty intensive activity on the network, and we do work with fairly large files. None of the network is online, which is nice at the moment because it allows me not to have another headache. On to my profile problem, I have set up roaming profiles for the users in the network. Now after a little research, I think I will be switching this to a hybrid of folder redirection and roaming profiles as this seems to best practice. I also don’t want the users having to wait for a long time if they have a bloated profile. Now I’ve finally got a build working using MDT. We have Mac Pros, and it wasn’t fun getting everything to play nice. The way I did this was by setting up a reference computer and installing all the software and tools that each user would need and editing the settings preferences to how we would need them. I think used MDT to do a sys prep and capture to create the image of my reference computer. Using the reference image I can push out my images to the rest of the desktops in my environment. The issue I’m having is when we join the computer to domain. The user can login and operate fine on the computer, but I’d like a more. When the user is logged on with their domain user name they lose a lot of the icons I had on my reference image, as well as the desktop background and some other miscellaneous settings. I would love to have the user log on using their domain user name and see the icons and desktop environment as I had it setup on the reference computer. I’m not sure if it is possible, or something simple that I’m missing, but any help would be greatly appreciated!

    Read the article

  • Browsers not responding

    - by Jesper
    Hello, Strange thing started to happen to my computer yesterday, and I can not recall installing anything new or updating anything the last few days either. It was first the browser, Chromium, that started to freeze up and not respond for ages, say 10 minutes. Then my email, Windows Live Mail client started doing the same thing, I click on an email and the program goes "not responding" for 5-10 minutes. At first I thought it was Chromium, so i reinstalled it but no help, So i installed Opera and thought I would give it t a try, but not same thing is happening to Opera so it is clearly an OS issue or/and internet connection issue. Does anyone know what the problem can be? Im running Windows 7 32bit on a dual core Sony vaio laptop with 4gb ram. There is nothing wrong with the actual internet connection as it works fine on other computers on the network, and the connection it self does not drop. Grateful for any help, Jesper

    Read the article

  • How to iptables forward ppp0 to eth0

    - by HPHPHP2012
    need your help with get it routing properly. I've server with eth0 (external interface) and eth1(internal interface). eth1 is merged into the bridge br0 (172.16.1.1) I've installed the pptp and successfully configured it, so I got ppp0 interface (192.168.91.1) and got my VPN clients successfully connected. So I need your help to manage how to allow my VPN clients use internet connection (eth0). Below my configuration files, any help is much appreciated! Thank you! P.S. VPN clients are Windows Xp, Windows 7, Mac OS X Lion, Ubuntu 12.04, iOS 5.x cat /etc/pptpd.conf #local server ip address localip 192.168.91.1 #remote addresses remoteip 192.168.91.11-254,192.168.91.10 #translating ip addresses on this interface bcrelay br0 cat /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute lock nobsdcomp auth logfile /var/log/pptpd.log cat /etc/nat-up #!/bin/sh SERVER_IP="aaa.aaa.aaa.aaa" LOCAL_IP="172.16.1.1" #eth0 with public ip PUBLIC="eth0" #br0 is internal bridge on eth1 interface INTERNAL="br0" #vpn VPN="ppp0" #local LOCAL="lo" iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -i $LOCAL -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i $PUBLIC -j ACCEPT ####CLEAR CONFIG#### #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -m state --state ESTABLISHED,RELATED -j ACCEPT #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -j ACCEPT #iptables -A FORWARD -i $INTERNAL -o $PUBLIC -j ACCEPT #iptables -t nat -A POSTROUTING -j MASQUERADE ####THIS PART IS NOT HANDLING IT#### iptables -A FORWARD -i $PUBLIC -o $VPN -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i $PUBLIC -o $VPN -j ACCEPT iptables -A FORWARD -s 192.168.91.0/24 -o $PUBLIC -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.91.0/24 -o $PUBLIC -j MASQUERADE # VPN - PPTPD iptables -A INPUT -p gre -s 0/0 -j ACCEPT iptables -A OUTPUT -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --dport 1723 -j ACCEPT #SSH iptables -A INPUT -p tcp --dport 2222 -j ACCEPT iptables -A OUTPUT -p tcp --sport 2222 -j ACCEPT #BLACKLIST BLOCKDB="/etc/ip.blocked" IPS=$(grep -Ev "^#" $BLOCKDB) for i in $IPS do iptables -A INPUT -s $i -j DROP iptables -A OUTPUT -d $i -j DROP done

    Read the article

  • Postfix configuration problem

    - by dhanya
    Can anyone help me by giving your postfix configuration file as a reference so that I can find my mistakes? I'm working on SUSE Linux Enterprise Server. My goal is to set up a mailserver in a campus network. Postfix shows it is running but no mail is sent to var/spool/mail I send mail using mail command at terminal. Here is my main.cf file, please help me finding a solution: readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES inet_protocols = all biff = no mail_spool_directory = /var/mail canonical_maps = hash:/etc/postfix/canonical virtual_alias_maps = hash:/etc/postfix/virtual virtual_alias_domains = hash:/etc/postfix/virtual relocated_maps = hash:/etc/postfix/relocated transport_maps = hash:/etc/postfix/transport sender_canonical_maps = hash:/etc/postfix/sender_canonical masquerade_exceptions = root masquerade_classes = envelope_sender, header_sender, header_recipient myhostname = cmail.cetmail delay_warning_time = 1h message_strip_characters = \0 program_directory = /usr/lib/postfix inet_interfaces = all #inet_interfaces = 127.0.0.1 masquerade_domains = cetmail mydestination = cmail.cetmail, localhost.cetmail, cetmail defer_transports = mynetworks_style = subnet disable_dns_lookups = no relayhost = postfix mailbox_command = cyrus mailbox_transport = strict_8bitmime = no disable_mime_output_conversion = no smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_helo_required = no smtpd_helo_restrictions = strict_rfc821_envelopes = no smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination smtp_sasl_auth_enable = no smtpd_sasl_auth_enable = no smtpd_use_tls = no smtp_use_tls = no alias_maps = hash:/etc/aliases mailbox_size_limit = 0 message_size_limit = 10240000

    Read the article

  • Vim Stuck In Insert Mode

    - by Levi Hackwith
    I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode. I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally. I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking. Things that might help: I'm using vim via putty I'm logging in using jailshell I'm not root

    Read the article

  • my torrent speed is slower all of the sudden

    - by nazmi98
    Last year when I tried to download torrent the speed was around 120 kb/s, but now it's only 10 kbs/s. I'm really confused here. I have been trying everything that I could find on the internet but nothing seems to work, so I'm really desperate for help. One more thing: I don't know if this will help, but i'm from Malaysia. My internet speed is 1 mb. I tried using all the PCs that I own and all seems to produce the same result.

    Read the article

  • SQL server 2008 R2 installation error

    - by Sonia
    I have a windows 7,32 bit laptop. I am the administrator with all permissions. when I click on the SQL server 2008R2 set up file,it says : "SQL server set up has encountered the following error:Failed to retreive data for this request" click on OK. I have uninstalled all the components of SQL from control panel. I used Windows installer clean up to remove the files(which I must have not done ),but still no go. The summary.txt log says: Overall summary: Final result: Failed: see details below Exit code (Decimal): 847168662 Exit facility code: 638 Exit error code: 50326 Exit message: Failed to retrieve data for this request. Start time: 2012-05-25 14:59:15 End time: 2012-05-25 15:00:09 Requested action: RunRules Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.5500.0%26EvtType%3d0xEF814B06%400x92D13C14 Machine Properties: Machine name: EWAN-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: Australia OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation location: c:\385030d65c6ff61fb9\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: RunRules CONFIGURATIONFILE: FEATURES: HELP: False INDICATEPROGRESS: False INSTANCENAME: QUIET: False QUIETSIMPLE: False RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2005InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\ConfigurationFile.ini Detailed results: Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: The rule result report file is not available. Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException Message: Failed to retrieve data for this request. Data: HelpLink.ProdName = Microsoft SQL Server HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink HelpLink.LinkId = 20476 DisableWatson = true Stack: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue() at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(HandleInternalException exceptionHandler) at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow() at Microsoft.SqlServer.Chainer.Setup.Setup.Run() at Microsoft.SqlServer.Chainer.Setup.Setup.Start() at Microsoft.SqlServer.Chainer.Setup.Setup.Main() Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException Message: Attempted to perform an unauthorized operation. Data: WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft SQL Server 10 Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Discovery.RegistryKeyExistsPropertyValueProvider.GetPropertyValue(Object[] context) at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetPropertyValueFromProvider(IPropertyValueProvider propertyValueProvider, String machineName, Object[] context) at Microsoft.SqlServer.Discovery.ObjectInstanceSettings.IsObjectFound(String machineName, String idFilter) at Microsoft.SqlServer.Discovery.Product.FilterObjectSet(ArrayList objects, String idFilter) at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData() at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request) Inner exception type: System.UnauthorizedAccessException Message: Attempted to perform an unauthorized operation. Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) Ineed to install SQL server 2008 R2 for one of the company softwares to work. Any immediate help will be greatly appreciated. Thanks Sonia

    Read the article

  • An efficient setup of several VPSs on one box?

    - by Abs
    Hello all, I hope its ok to ask this question on serverfault, its not an actual fault but more of an implementation advice request. I would like to have a dedicated server that I can deploy my own VPSs on. These VPS will be various windows, Mac and Linux operating systems. I was thinking of buying a large Linux based dedicated server and then running VMWare Server or Virtualbox and adding my own images on there for each OS but I am thinking this isn't going to be cost effective and easy to maintain. I am hoping someone can help me with the perfect setup that is both cost effective and efficient so that I can have 6 VPS at my disposal that I can easily control. Thanks all for any help.

    Read the article

  • How to stabilize PCIe sound card in its card slot?

    - by Josh
    I have a Soundblaster Recon 3d Fatal1ty sound card and randomly every once in a while my computer won't recognize it. I am almost 100% sure it is something to do with its PCIe slot. After I turn off the computer and just wiggle the card a bit, the computer recognizes the card once I restart. I can't really try it in the other PCIe slot because the video card gets in the way. It is a Biostar TA970XE motherboard. I don't know if it is something to do with the pins on the actual card or if it is something to do with the slot. I couldn't find any related issues about this card on Google. Is there anything I can do to help secure the card in its slot so that my computer will recognize it? Any help is appreciated.

    Read the article

  • How do I delete the Windows Explorer address bar history

    - by mlissner
    Note: I am NOT referring to Internet Explorer. I am using Windows XP and Windows Server 2008 and need to delete the history values from the file browser (aka Windows Explorer). Somebody put a password into the address bar as ftp://user:pass, and now I can't delete the value. Some forums say to delete this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\TypedPaths In Windows XP, the key doesn't exist, and in Windows Server 2008, the key is there, but deleting it doesn't seem to help. Any help?

    Read the article

  • performance of vmware-machine on different computers

    - by bxshi
    I'm working on a filesystem improving project, and found a paper says the cheating on benchmark, and it gives a solution that use VMs could help others to reproduce our result. And the question is, if I have made a specific vmware virtual machine, will it runs the same at different computer and platform? For example, I have a virtual machine which is 1G RAM, 4G HD and 2G one-core CPU. Will that runs the same at a qual-core 3G CPU and a 2.4G P4? What if the computer have 4G RAM? Will vmware use some buffer mechanism to improve performance? If that's true, does it means the VM runs on a 2G RAM host will slower than on a 4G host? Hope you can help me on that, or just told me where could I find the answer.

    Read the article

  • File system loop detected in /var/named/chroot/var/named/

    - by Iko
    The problem start with a message No space left on device. After investigating a little (with google's help) I found : find: File system loop detected; /var/named/chroot/var/named' is part of the same file system loop as/var/named'. What I don't know is what to do next. I found this on centos.org : and see if the inode numbers are the same (they shouldn't be). If they are then you need to remove the /var/named/chroot/var/named/ hard link and recreate it as a directory the inode number are the same but I don't know exactly which folder to delete and what to do next thank you for any help Linux xxxxx.onlinehome-server.info 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • IPv6 static routes

    - by user98651
    I am looking to configure a few hosts with IPv6 on my network. The router (running CentOS 5) is configured with an Hurricane Electric (HE) tunnel which works fine on that host. However, I would like to statically add a few additional hosts on the same LAN to have IPv6 through this tunnel. No, I don't want radvd or dhcpv6 to do the work for me in this case. I already have IPv6 forwarding enabled in sysctl.conf. I am looking for help with the next steps (statically adding the routes). Lets say the IP addresses are as follows: Router: 2001:470:1b07:1:: Host1: 2001:470:1b07:2:: How would I go about making them see each other? Thanks in advance for the help.

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >