Search Results

Search found 6510 results on 261 pages for 'umesha ms'.

Page 244/261 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• How to produce precisely-timed tone and silence in C#

  - by Bob Denny

  I have a C# project that plays Morse code for RSS feeds. I write it using Managed DirectX, only to discover that Managed DirectX is old and deprecated. The task I have is to play pure sine wave bursts interspersed with silence periods (the code) which are precisely timed as to their duration. I need to be able to call a function which plays a pure tone for so many milliseconds, then Thread.Sleep() then play another, etc. At its fastest, the tones and spaces can be as short as 40ms. It's working quite well in Managed DirectX. To get the precisely timed tone I create 1 sec. of sine wave into a secondary buffer, then to play a tone of a certain duration I seek forward to within x milliseconds of the end of the buffer then play. I've tried System.Media.SoundPlayer. It's a loser because you have to Play(), Sleep(), then Stop() for arbitrary tone lengths. The result is a tone that is too long, variable by CPU load. It takes an indeterminate amount of time to actually stop the tone. I then embarked on a lengthy attempt to use NAudio 1.3. I ended up with a memory resident stream providing the tone data, and again seeking forward leaving the desired length of tone remaining in the stream, then playing. This worked OK on the DirectSoundOut class for a while (see below) but the WaveOut class quickly dies with an internal assert saying that buffers are still on the queue despite PlayerStopped = true. This is odd since I play to the end then put a wait of the same duration between the end of the tone and the start of the next. You'd think that 80ms after starting Play of a 40 ms tone that it wouldn't have buffers on the queue. DirectSoundOut works well for a while, but its problem is that for every tone burst Play() it spins off a separate thread. Eventually (5 min or so) it just stops working. You can see thread after thread after thread exiting in the Output window while running the project in VS2008 IDE. I don't create new objects during playing, I just Seek() the tone stream then call Play() over and over, so I don't think it's a problem with orphaned buffers/whatever piling up till it's choked. I'm out of patience on this one, so I'm asking in the hopes that someone here has faced a similar requirement and can steer me in a direction with a likely solution. Thanks in advance...

  Read the article

• ASP.NET MVC hosting problem, routing, handlers and modules

  - by johnabs

  Hi, This is one of them again, hosting with fasthosts. I recently purchased a windows developer package from them. When I tried to deploy my ASP.NET 3.5 MVC project, which was working fine with the same host on a reseller account, it is not working. The reason to move from reseller to a normal Windows Developer package is, the MS-SQL server database is too expensive in a reseller account, strange! I contact them, and they are saying they upgraded the control panel. The technical support said, I need to disable the Modules and Handlers from the web.config file. Also I need to deploy them as .dll files. I am not sure how to do that. The website is partially working now. I think the problem is now with the routing. I have not deployed any .dlls apart from the System.Web.Mvc.dll, System.Web.Routing.dll and System.Web.Abstractions.dll. I have not got a clue on how to deploy the Modules and Handlers. The code that I commented on the web.config file is as follows. <!--<modules runAllManagedModulesForAllRequests="true"> <remove name="ScriptModule" /> <remove name="UrlRoutingModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <remove name="MvcHttpHandler" /> <remove name="UrlRoutingHandler" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="MvcHttpHandler" preCondition="integratedMode" verb="*" path="*.mvc" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="UrlRoutingHandler" preCondition="integratedMode" verb="*" path="UrlRouting.axd" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </handlers>--> Anybody got any ideas please. Thank you for your time.

  Read the article

• vb.net .aspxauth

  - by Morgan

  I am working with a large site trying to implement web parts for particular users in a particular subdirectory but I can't get the .ASPXAUTH cookie to be recognized. I've read dozens of tutorials and MS class library pages that tell me how it should work to no avail. I am brand new to Web parts, so I'm sorry if I'm unclear. The idea is that logged in users can travel the site, but then when they go to their dashboard, they are programmatically authenticated using Membership and FormsAuthentication to pull up their Personalization. When I step through the code, I can see the cookie being set, and that it exists on the following page, but Membership.GetUser() and User.Identity are both empty. I know the user exists because I created it programmatically using Membership.CreateUser() and I can see it when I do Membership.GetAllUsers() and it's online when i use Membership.GetUser(username) but the Personalization doesn't work. Right now, I'm just trying to get the proof of concept going. I've tried creating the ticket and cookie myself, and also using SetAuthCookie() (code follows). I really just need a clue as to what to look for. Here's the "login" page... If Membership.ValidateUser(testusername, testpassword) Then -- Works FormsAuthentication.SetAuthCookie(testusername, true) Response.Redirect("webpartsdemo1.aspx", False) End If And the next page (webpartsdemo1.aspx) Dim cookey As String = ".ASPXAUTH" lblContent.Text &= "<br><br>" & Request.Cookies(cookey).Name & " Details" lblContent.Text &= "<br>path = " & Request.Cookies(cookey).Path lblContent.Text &= "<br>domain = " & Request.Cookies(cookey).Domain lblContent.Text &= "<br>expires = " & Request.Cookies(cookey).Expires lblContent.Text &= "<br>Secure only? " & Request.Cookies(cookey).Secure lblContent.Text &= "<br>HTTP only? = " & Request.Cookies(cookey).HttpOnly lblContent.Text &= "<br>Has subkeys? " & Request.Cookies(cookey).HasKeys lblContent.Text &= "<br/><br/>request authenticated? " & Request.IsAuthenticated.ToString lblContent.Text &= " Getting user<br/>Current User: " Dim muGidget As MembershipUser If Request.IsAuthenticated Then muGidget = Membership.GetUser lblContent.Text &= Membership.GetUser().UserName Else lblContent.Text &= "none found" End If Output: .ASPXAUTH Details path = / domain = expires = 12:00:00 AM Secure only? False HTTP only? = False Has subkeys? False request authenticated? False Getting user Current User: none found Sorry to go on so long. Thanks for any help you can provide.

  Read the article

• Subclassing a window from a thread in c#

  - by user258651

  I'm creating a thread that looks for a window. When it finds the window, it overrides its windowproc, and handles WM_COMMAND and WM_CLOSE. Here's the code that looks for the window and subclasses it: public void DetectFileDialogProc() { Window fileDialog = null; // try to find the dialog twice, with a delay of 500 ms each time for (int attempts = 0; fileDialog == null && attempts < 2; attempts++) { // FindDialogs enumerates all windows of class #32770 via an EnumWindowProc foreach (Window wnd in FindDialogs(500)) { IntPtr parent = NativeMethods.User32.GetParent(wnd.Handle); if (parent != IntPtr.Zero) { // we're looking for a dialog whose parent is a dialog as well Window parentWindow = new Window(parent); if (parentWindow.ClassName == NativeMethods.SystemWindowClasses.Dialog) { fileDialog = wnd; break; } } } } // if we found the dialog if (fileDialog != null) { OldWinProc = NativeMethods.User32.GetWindowLong(fileDialog.Handle, NativeMethods.GWL_WNDPROC); NativeMethods.User32.SetWindowLong(fileDialog.Handle, NativeMethods.GWL_WNDPROC, Marshal.GetFunctionPointerForDelegate(new WindowProc(WndProc)).ToInt32()); } } And the windowproc: public IntPtr WndProc(IntPtr hWnd, uint msg, IntPtr wParam, IntPtr lParam) { lock (this) { if (!handled) { if (msg == NativeMethods.WM_COMMAND || msg == NativeMethods.WM_CLOSE) { // adding to a list. i never access the window via the hwnd from this list, i just treat it as a number _addDescriptor(hWnd); handled = true; } } } return NativeMethods.User32.CallWindowProc(OldWinProc, hWnd, msg, wParam, lParam); } This all works well under normal conditions. But I am seeing two instances of bad behavior in order of badness: If I do not close the dialog within a minute or so, the app crashes. Is this because the thread is getting garbage collected? This would kind of make sense, as far as GC can tell the thread is done? If this is the case, (and I don't know that it is), how can I make the thread stay around as long as the dialog is around? If I immediately close the dialog with the 'X' button (WM_CLOSE) the app crashes. I believe its crashing in the windowproc, but I can't get a breakpoint in there. I'm getting an AccessViolationException, The exception says "Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Its a race condition, but of what I don't know. FYI, I had been reseting the old windowproc once I processed the commands, but that was crashing even more often! Any ideas on how I can solve these issues?

  Read the article

• Problem with LINQ Generated class and IEnumerable to Excel

  - by mehmet6parmak

  Hi all, I wrote a method which exports values to excel file from an IEnumerable parameter. Method worked fine for my little test class and i was happy till i test my method with a LINQ class. Method: public static void IEnumerableToExcel<T>(IEnumerable<T> data, HttpResponse Response) { Response.Clear(); Response.ContentEncoding = System.Text.Encoding.Default; Response.Charset = "windows-1254"; // set MIME type to be Excel file. Response.ContentType = "application/vnd.ms-excel;charset=windows-1254"; // add a header to response to force download (specifying filename) Response.AddHeader("Content-Disposition", "attachment;filename=\"ResultFile.xls\""); Type typeOfT = typeof(T); List<string> result = new List<string>(); FieldInfo[] fields = typeOfT.GetFields(); foreach (FieldInfo info in fields) { result.Add(info.Name); } Response.Write(String.Join("\t", result.ToArray()) + "\n"); foreach (T t in data) { result.Clear(); foreach (FieldInfo f in fields) result.Add((typeOfT).GetField(f.Name).GetValue(t).ToString()); Response.Write(String.Join("\t", result.ToArray()) + "\n"); } Response.End(); } My Little Test Class: public class Mehmet { public string FirstName; public string LastName; } Two Usage: Success: Mehmet newMehmet = new Mehmet(); newMehmet.FirstName = "Mehmet"; newMehmet.LastName = "Altiparmak"; List<Mehmet> list = new List<Mehmet>(); list.Add(newMehmet); DeveloperUtility.Export.IEnumerableToExcel<Mehmet>(list, Response); Fail: ExtranetDataContext db = new ExtranetDataContext(); DeveloperUtility.Export.IEnumerableToExcel<User>(db.Users, Response); Fail Reason: When the code reaches the code block used to get the fields of the template(T), it can not find any field for the LINQ Generated User class. For my weird class it works fine. Why? Thanks...

  Read the article

• Evaluation of CTEs in SQL Server 2005

  - by Jammer

  I have a question about how MS SQL evaluates functions inside CTEs. A couple of searches didn't turn up any results related to this issue, but I apologize if this is common knowledge and I'm just behind the curve. It wouldn't be the first time :-) This query is a simplified (and obviously less dynamic) version of what I'm actually doing, but it does exhibit the problem I'm experiencing. It looks like this: CREATE TABLE #EmployeePool(EmployeeID int, EmployeeRank int); INSERT INTO #EmployeePool(EmployeeID, EmployeeRank) SELECT 42, 1 UNION ALL SELECT 43, 2; DECLARE @NumEmployees int; SELECT @NumEmployees = COUNT(*) FROM #EmployeePool; WITH RandomizedCustomers AS ( SELECT CAST(c.Criteria AS int) AS CustomerID, dbo.fnUtil_Random(@NumEmployees) AS RandomRank FROM dbo.fnUtil_ParseCriteria(@CustomerIDs, 'int') c) SELECT rc.CustomerID, ep.EmployeeID FROM RandomizedCustomers rc JOIN #EmployeePool ep ON ep.EmployeeRank = rc.RandomRank; DROP TABLE #EmployeePool; The following can be assumed about all executions of the above: The result of dbo.fnUtil_Random() is always an int value greater than zero and less than or equal to the argument passed in. Since it's being called above with @NumEmployees which has the value 2, this function always evaluates to 1 or 2. The result of dbo.fnUtil_ParseCriteria(@CustomerIDs, 'int') produces a one-column, one-row table that contains a sql_variant with a base type of 'int' that has the value 219935. Given the above assumptions, it makes sense (to me, anyway) that the result of the expression above should always produce a two-column table containing one record - CustomerID and an EmployeeID. The CustomerID should always be the int value 219935, and the EmployeeID should be either 42 or 43. However, this is not always the case. Sometimes I get the expected single record. Other times I get two records (one for each EmployeeID), and still others I get no records. However, if I replace the RandomizedCustomers CTE with a true temp table, the problem vanishes completely. Every time I think I have an explanation for this behavior, it turns out to not make sense or be impossible, so I literally cannot explain why this would happen. Since the problem does not happen when I replace the CTE with a temp table, I can only assume it has something to do with the functions inside CTEs are evaluated during joins to that CTE. Do any of you have any theories?

  Read the article

• understanding logic of dijit css and styles

  - by Tom

  Hi, I am trying to use dijit.InlineEditBox. I have put the following code in my HTML, using the example in the dojo docs: <script type="text/javascript"> dojo.require("dijit.InlineEditBox"); dojo.require("dojo.parser"); dojo.require("dijit.form.TextBox"); function editableHeaderOnChange(id, arg){ alert("details changed with id " + id + " and arguments "+arg); } </script> ... <span id="myText" dojoType="dijit.InlineEditBox" onChange="editableHeaderOnChange(this.id,arguments[0])" autoSave="true" title="My Text">click to edit me</span> I am using tundra theme. It works, however it doesn't look so good. The widget has its own style, which doesn't fit my CSS. I used firebug to locate the source of the problem. The widget creates many nested div/span elements, each has it's own style (element style in firebug): <span id="dijit__InlineEditor_0" class="dijitReset dijitInline" style="margin: 0px; position: absolute; visibility: hidden; display: block; opacity: 0;" ...> <input type="text" autocomplete="off" class="dijit dijitReset dijitLeft dijitTextBox" id="dijit_form_TextBox_0" style="line-height: 20px; font-weight: 400; font-family: Trebuchet MS,Helvetica,Arial,Verdana; font-size: 14.5167px; font-style: normal; width: 100%;"> ...> </span></span> (showing only the relevant parts...) to get the visual that I want, which will not break to a newline, I need to change the width of dijit_form_TextBox_0** to 50%, and the positioning of dijit__InlineEditor_0 to display: inline**; or to change the positioning of everything (most of my layout is floated, so position: absolute doesn't fit) I cannot address those span elements in my css to change the properties, because the element.style has priority, of course. I don't understand the logic in this system... why is dijit generating the style directly inside the element? how can I change these properties? Thanks Tom

  Read the article

• Defining where on the page the flowdocument I am printing will 'start' and 'end'

  - by Sagi1981

  Dear community. I am almost done with implementing a printing functionality, but I am having trouble getting the last hurdle done with. My problem is, that I am printing some reports, consisting of a header (with information about the person the report is about), a footer (with a page number) and the content in the middle, which is a FlowDocument. Since the flowdocuments can be fairly long, It is very possible that they will span multiple pages. My approach is to make a custom FlowDocumentPaginator which derives from DocumentPaginator. In there i define my header and my footer. However, when I print my page, the flowdocument and my header and footer are on top of eachother. So my question is plain and simple - how do I define from where and to where the flowdocument part on the pages will be placed? here is the code from my custommade Paginator: public class HeaderedFlowDocumentPaginator : DocumentPaginator { private DocumentPaginator flowDocumentpaginator; public HeaderedFlowDocumentPaginator(FlowDocument document) { flowDocumentpaginator = ((IDocumentPaginatorSource) document).DocumentPaginator; } public override bool IsPageCountValid { get { return flowDocumentpaginator.IsPageCountValid; } } public override int PageCount { get { return flowDocumentpaginator.PageCount; } } public override Size PageSize { get { return flowDocumentpaginator.PageSize; } set { flowDocumentpaginator.PageSize = value; } } public override IDocumentPaginatorSource Source { get { return flowDocumentpaginator.Source; } } public override DocumentPage GetPage(int pageNumber) { DocumentPage page = flowDocumentpaginator.GetPage(pageNumber); ContainerVisual newVisual = new ContainerVisual(); newVisual.Children.Add(page.Visual); DrawingVisual header = new DrawingVisual(); using (DrawingContext dc = header.RenderOpen()) { //Header data } newVisual.Children.Add(header); DrawingVisual footer = new DrawingVisual(); using (DrawingContext dc = footer.RenderOpen()) { Typeface typeface = new Typeface("Trebuchet MS"); FormattedText text = new FormattedText("Page " + (pageNumber + 1).ToString(), CultureInfo.CurrentCulture, FlowDirection.LeftToRight, typeface, 14, Brushes.Black); dc.DrawText(text, new Point(page.Size.Width - 100, page.Size.Height-30)); } newVisual.Children.Add(footer); DocumentPage newPage = new DocumentPage(newVisual); return newPage; } } And here is the printdialogue call: private void btnPrint_Click(object sender, RoutedEventArgs e) { try { PrintDialog printDialog = new PrintDialog(); if (printDialog.ShowDialog() == true) { FlowDocument fd = new FlowDocument(); MemoryStream stream = new MemoryStream(ASCIIEncoding.Default.GetBytes(<My string of text - RTF formatted>)); TextRange tr = new TextRange(fd.ContentStart, fd.ContentEnd); tr.Load(stream, DataFormats.Rtf); stream.Close(); fd.ColumnWidth = printDialog.PrintableAreaWidth; HeaderedFlowDocumentPaginator paginator = new HeaderedFlowDocumentPaginator(fd); printDialog.PrintDocument(paginator, "myReport"); } } catch (Exception ex) { //Handle } }

  Read the article

• Google maps API : V2 : Custom infowindow with bindInfoWindowHtml

  - by PlanetUnknown

  The API documentation gave me hopes last night with "bindInfoWindowHtml". But it doesn't seem to replace the default infoWindow, even when you provide your own class etc. I have tried using other ideas like the labeledmarker. But it doesn't support draggable markers. Hence can't use it in my application. Here is the sample code which shows the info. window inside, the original bubble. Isn't there a way to override that window as well ! ` <style type="text/css"> .infoWindowCustomClass { width: 500px; height: 500px; background-color: #CAEE96; color: #666; } </style> <meta http-equiv="content-type" content="text/html; charset=utf-8"/> <title>Google Maps JavaScript API Example</title> <script src="http://maps.google.com/maps?file=api&amp;v=2&amp;sensor=false&amp;key="" type="text/javascript"></script> <script type="text/javascript"> function load() { if (GBrowserIsCompatible()) { // Create our "tiny" marker icon var blueIcon = new GIcon(G_DEFAULT_ICON); blueIcon.image = "http://www.google.com/intl/en_us/mapfiles/ms/micons/blue-dot.png"; // Set up our GMarkerOptions object markerOptions = { icon:blueIcon }; var map = new GMap2(document.getElementById("map")); map.setCenter(new GLatLng(33.968064,-83.377047), 13); markerOptions.title = "fart"; var point = new GLatLng(33.968064,-83.377047); var marker = new GMarker(point); var tempName = document.getElementById("infoWindowCustom"); marker.bindInfoWindowHtml(tempName); map.addOverlay(marker); } } </script>` And here is the DIV - <DIV id="infoWindowCustom" name="infoWindowCustom" class="infoWindowCustomClass"> Name : <TEXTAREA NAME="nameID" ID="nameID" ROWS="2" COLS="25"></TEXTAREA> Comments : <TEXTAREA NAME="commentsID" ID="commentsID" ROWS="4" COLS="25"></TEXTAREA> </DIV>

  Read the article

• Freetype2 failing under WoW64

  - by Necrolis

  I built a tff to D3D texture function using freetype2(2.3.9) to generate grayscale maps from the fonts. it works great under native win32, however, on WoW64 it just explodes (well, FT_Done and FT_Load_Glyph do). from some debugging, it seems to be a problem with HeapFree as called by free from FT_Free. I know it should work, as games like WCIII, which to the best of my knowledge use freetype2, run fine, this is my code, stripped of the D3D code(which causes no problems on its own): FT_Face pFace = NULL; FT_Error nError = 0; FT_Byte* pFont = static_cast<FT_Byte*>(ARCHIVE_LoadFile(pBuffer,&nSize)); if((nError = FT_New_Memory_Face(pLibrary,pFont,nSize,0,&pFace)) == 0) { FT_Set_Char_Size(pFace,nSize << 6,nSize << 6,96,96); for(unsigned char c = 0; c < 95; c++) { if(!FT_Load_Glyph(pFace,FT_Get_Char_Index(pFace,c + 32),FT_LOAD_RENDER)) { FT_Glyph pGlyph; if(!FT_Get_Glyph(pFace->glyph,&pGlyph)) { LOG("GET: %c",c + 32); FT_Glyph_To_Bitmap(&pGlyph,FT_RENDER_MODE_NORMAL,0,1); FT_BitmapGlyph pGlyphMap = reinterpret_cast<FT_BitmapGlyph>(pGlyph); FT_Bitmap* pBitmap = &pGlyphMap->bitmap; const size_t nWidth = pBitmap->width; const size_t nHeight = pBitmap->rows; //add to texture atlas } } } } else { FT_Done_Face(pFace); delete pFont; return FALSE; } FT_Done_Face(pFace); delete pFont; return TRUE; } ARCHIVE_LoadFile returns blocks allocated with new. As a secondary question, I would like to render a font using pixel sizes, I came across FT_Set_Pixel_Sizes, but I'm unsure as to whether this stretches the font to fit the size, or bounds it to a size. what I would like to do is render all the glyphs at say 24px (MS Word size here), then turn it into a signed distance field in a 32px area. Update After much fiddling, I got a test app to work, which leads me to think the problems are arising from threading, as my code is running in a secondary thread. I have compiled freetype into a static lib using the multithread DLL, my app uses the multithreaded libs. gonna see if i can set up a multithreaded test. Also updated to 2.4.4, to see if the problem was a known but fixed bug, didn't help however. Update 2 After some more fiddling, it turns out I wasn't using the correct lib for 2.4.4 -.- after fixing that, the test app works 100%, but the main app still crashes when FT_Done_Face is called, still seems to be a crash in the memory heap management of windows. is it possible that there is a bug in freetype2 that makes it blow up under user threads?

  Read the article

• Verify Authenticode signature as being from our company for automatic updater

  - by James Johnston

  I am implementing an automatic update feature and need some advice on how to do this securely using best practices. I would like to use the downloaded file's Authenticode signature to verify that it is safe to run (i.e. originates from our company and hasn't been tampered with). My question is very similar to question #2008519. The bottom-line question: what's the best, most secure way to check Authenticode signatures for an automatic update feature? What fields in the certificate should be checked? Requirements being: (1) check signature is valid, (2) check it's my signature, (3) old clients can still update when my certificate expires and I get a new one. Here's some background information / ideas from my research: I believe this could be broken into two steps: Verify that the signature is valid. I believe this should be easy using WinVerifyTrust as outlined in http://msdn.microsoft.com/en-us/library/aa382384(VS.85).aspx - I don't expect problems here. Verify that the signature corresponds to our company, and not another company. This seems to be a more difficult question to answer: One possibility is to check some of the strings in the signature. Could be obtained via code at MS KB article #323809, but this article doesn't make recommendations on what fields should be checked for this type of application (or any other, for that matter). Question #1072540 also illustrates how to get some certificate info, but again doesn't recommend what fields to actually check. My concern is that the strings might not be the best check: what if another person is able to obtain a certificate with the same name, for example? Or if there's a valid reason for us to change the strings in the future? The person at question #2008519 has a very similar requirement. His need for a "TrustedByUs" function is identical to mine. However, he goes about doing the check by comparing public keys. While this would work in the short-term, it seems like it won't work for an automatic update feature. This is because code signing certificates are only valid for 2 - 3 years max. Therefore, in the future, when we buy a new certificate in 2 years, the old clients wouldn't be able to update any more due to the change in public key.

  Read the article

• C# Spell checker Problem

  - by reggie

  I've incorporated spell check into my win forms C# project. This is my code. public void CheckSpelling() { try { // declare local variables to track error count // and information int SpellingErrors = 0; string ErrorCountMessage = string.Empty; // create an instance of a word application Microsoft.Office.Interop.Word.Application WordApp = new Microsoft.Office.Interop.Word.Application(); // hide the MS Word document during the spellcheck //WordApp.WindowState = WdWindowState.wdWindowStateMinimize; // check for zero length content in text area if (this.Text.Length > 0) { WordApp.Visible = false; // create an instance of a word document _Document WordDoc = WordApp.Documents.Add(ref emptyItem, ref emptyItem, ref emptyItem, ref oFalse); // load the content written into the word doc WordDoc.Words.First.InsertBefore(this.Text); // collect errors form new temporary document set to contain // the content of this control Microsoft.Office.Interop.Word.ProofreadingErrors docErrors = WordDoc.SpellingErrors; SpellingErrors = docErrors.Count; // execute spell check; assumes no custom dictionaries WordDoc.CheckSpelling(ref oNothing, ref oIgnoreUpperCase, ref oAlwaysSuggest, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing); // format a string to contain a report of the errors detected ErrorCountMessage = "Spell check complete; errors detected: " + SpellingErrors; // return corrected text to control's text area object first = 0; object last = WordDoc.Characters.Count - 1; this.Text = WordDoc.Range(ref first, ref last).Text; } else { // if nothing was typed into the control, abort and inform user ErrorCountMessage = "Unable to spell check an empty text box."; } WordApp.Quit(ref oFalse, ref emptyItem, ref emptyItem); System.Runtime.InteropServices.Marshal.ReleaseComObject(WordApp); // return report on errors corrected // - could either display from the control or change this to // - return a string which the caller could use as desired. // MessageBox.Show(ErrorCountMessage, "Finished Spelling Check"); } catch (Exception e) { MessageBox.Show(e.ToString()); } } The spell checker works well, the only problem is when I try to move the spell checker the main form blurs up for some reason. Also when I close the spell checker the main form is back to normal. It seems like it is opening up Microsoft word then hiding the window, only allowing the spell checker to be seen. Please help.

  Read the article

• how to save xml files using Javascript?

  - by user311884

  Dear friends, I tried to 1) load an xml file using javascript as an object, say "note.xml" 2) then save the object to a new xml file, say "note_new.xml" I did 1) but failed 2) I tried to use method save() to do 2). After my failure, I checked ms site and they said save() is not supported.... could some one enlighten me how to do the save? thank you! here is the code: <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> </head> <body> <h1>W3Schools Internal Note</h1> <p><b>To:</b> <span id="to"></span><br /> <b>From:</b> <span id="from"></span><br /> <b>Message:</b> <span id="message"></span> <script type="text/javascript"> if (window.ActiveXObject){ alert("there is ActiveXObject"); var xmlDoc = new ActiveXObject("Microsoft.XMLDOM"); xmlDoc.async=false; xmlDoc.load("note.xml"); }else{ alert("i am not withActiveXObject!"); xhttp=new XMLHttpRequest(); xhttp.open("GET","note.xml",false); xhttp.send(""); xmlDoc=xhttp.responseXML; } xmlDoc.save("note_new.xml"); </script> </body> </html> update: seems this is related to security issue. I appologize to those experienced programmers for my putting this question in a rush because it seems a newbie question.

  Read the article

• Cube project doesn't work because of permissions

  - by sms

  I'm doing "Multidimensional Project" with MS SQL Server 2012 (Server Data Tools - Visual Studio 2010 Shell). I can't run (debug) it. If the data source's impersonation information is set to "use the service account", this error occures: Error 2 Internal error: The operation terminated unsuccessfully. 0 0 Error 3 OLE DB error: OLE DB or ODBC error: Login failed for user 'NT Service\MSSQLServerOLAPService'.; 28000. 0 0 Error 4 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Data Warehouse', Name of 'Data Warehouse'. 0 0 Error 5 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Items', Name of 'Items' was being processed. 0 0 Error 6 Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'Items' dimension from the 'Warehouse_MultidimensionalProject_Cube' database was being processed. 0 0 Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0 I guessed that this account has no premissions but (1) I coudn't even add this account (it seems that it doesn't exist) and (2) how is that even possible for it to not have built-it poremissions? When I'm setting impersonation to "use the credentials of current user" (which is the owner of the data source, btw.), another error occures: Error 2 Internal error: The operation terminated unsuccessfully. 0 0 Error 3 The datasource, 'Data Warehouse', contains an ImpersonationMode that is not supported for processing operations. 0 0 Error 4 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Data Warehouse', Name of 'Data Warehouse'. 0 0 Error 5 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Items', Name of 'Items' was being processed. 0 0 Error 6 Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'Items' dimension from the 'Warehouse_MultidimensionalProject_Cube' database was being processed. 0 0 Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0 Any help?

  Read the article

• Jboss logging issue

  - by balaji

  I'm Working as deployer and server administrator. We use Jboss 4.0x AS to deploy our applications. The issue I'm facing is, Whenever we redeploy/restart the server, server.log is getting created but after sometime the logging goes off. Yes it is not at all updating the server.log file. Due to this, we could not trace the other critical issues we have. Actually we have two separate nodes and we do deploy/restarting the server separately on two nodes. We are facing the issue in both of our test and production environment. I could not trace out where exactly the issue is. Could you please help me in resolving the issue? If we have any other issues, we can check the log files. If log itself is not getting updated/logged, how can we move further in analyzing the issues without the recent/updated logs? Below are the logs found in the stdout.log: 18:55:50,303 INFO [Server] Core system initialized 18:55:52,296 INFO [WebService] Using RMI server codebase: http://kl121tez.is.klmcorp.net:8083/ 18:55:52,313 INFO [Log4jService$URLWatchTimerTask] Configuring from URL: resource:log4j.xml 18:55:52,860 ERROR [STDERR] LOG0026E The Log Manager cannot create the object AmasRBPFTraceLogger without a class name. 18:55:52,860 ERROR [STDERR] LOG0026E The Log Manager cannot create the object AmasRBPFMessageLogger without a class name. 18:55:54,273 ERROR [STDERR] LOG0026E The Log Manager cannot create the object AmasCacheTraceLogger without a class name. 18:55:54,274 ERROR [STDERR] LOG0026E The Log Manager cannot create the object AmasCacheMessageLogger without a class name. 18:55:54,334 ERROR [STDERR] LOG0026E The Log Manager cannot create the object JACCTraceLogger without a class name. 18:55:54,334 ERROR [STDERR] LOG0026E The Log Manager cannot create the object JACCMessageLogger without a class name. 18:55:56,059 INFO [ServiceEndpointManager] WebServices: jbossws-1.0.3.SP1 (date=200609291417) 18:55:56,635 INFO [Embedded] Catalina naming disabled 18:55:56,671 INFO [ClusterRuleSetFactory] Unable to find a cluster rule set in the classpath. Will load the default rule set. 18:55:56,672 INFO [ClusterRuleSetFactory] Unable to find a cluster rule set in the classpath. Will load the default rule set. 18:55:56,843 INFO [Http11BaseProtocol] Initializing Coyote HTTP/1.1 on http-0.0.0.0-8180 18:55:56,844 INFO [Catalina] Initialization processed in 172 ms 18:55:56,844 INFO [StandardService] Starting service jboss.web

  Read the article

• How to produce precisely-timed tone and silence?

  - by Bob Denny

  I have a C# project that plays Morse code for RSS feeds. I write it using Managed DirectX, only to discover that Managed DirectX is old and deprecated. The task I have is to play pure sine wave bursts interspersed with silence periods (the code) which are precisely timed as to their duration. I need to be able to call a function which plays a pure tone for so many milliseconds, then Thread.Sleep() then play another, etc. At its fastest, the tones and spaces can be as short as 40ms. It's working quite well in Managed DirectX. To get the precisely timed tone I create 1 sec. of sine wave into a secondary buffer, then to play a tone of a certain duration I seek forward to within x milliseconds of the end of the buffer then play. I've tried System.Media.SoundPlayer. It's a loser because you have to Play(), Sleep(), then Stop() for arbitrary tone lengths. The result is a tone that is too long, variable by CPU load. It takes an indeterminate amount of time to actually stop the tone. I then embarked on a lengthy attempt to use NAudio 1.3. I ended up with a memory resident stream providing the tone data, and again seeking forward leaving the desired length of tone remaining in the stream, then playing. This worked OK on the DirectSoundOut class for a while (see below) but the WaveOut class quickly dies with an internal assert saying that buffers are still on the queue despite PlayerStopped = true. This is odd since I play to the end then put a wait of the same duration between the end of the tone and the start of the next. You'd think that 80ms after starting Play of a 40 ms tone that it wouldn't have buffers on the queue. DirectSoundOut works well for a while, but its problem is that for every tone burst Play() it spins off a separate thread. Eventually (5 min or so) it just stops working. You can see thread after thread after thread exiting in the Output window while running the project in VS2008 IDE. I don't create new objects during playing, I just Seek() the tone stream then call Play() over and over, so I don't think it's a problem with orphaned buffers/whatever piling up till it's choked. I'm out of patience on this one, so I'm asking in the hopes that someone here has faced a similar requirement and can steer me in a direction with a likely solution.

  Read the article

• ASP.NET site sometimes freezing up and/or showing odd text at top of the page while loading, on load

  - by MGOwen

  I have various servers (dev, 2 x test, 2 x prod) running the same asp.net site. The test and prod servers are in load-balanced pairs (prod1 with prod2, and test1 with test2). The test server pair is exhibiting some kind of (super) slowdown or freezing during about one in ten page loads. Sometimes a line of text appears at the very top of the page which looks something like: 00 OK Date: Thu, 01 Apr 2010 01:50:09 GMT Server: Microsoft-IIS/6.0 X-Powered_By: ASP.NET X-AspNet-Version:2.0.50727 Cache-Control:private Content-Type:text/html; charset=ut (the beginning and end are "cut off".) Has anyone seen anything like this before? Any idea what it means or what's causing it? Edit: I often see this too when clicking something - it comes up as red text on a yellow page: XML Parsing Error: not well-formed Location: http://203.111.46.211/3DSS/CompanyCompliance.aspx?cid=14 Line Number 1, Column 24:2mMTehON9OUNKySVaJ3ROpN" / -----------------------^ If I go back and click again, it works (I see the page I clicked on, not the above error message). Update: ...And, instead of the page loading, I sometimes just get a white screen with text like this in black (looks a lot like the above text): HTTP/1.1 302 Found Date: Wed, 21 Apr 2010 04:53:39 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET X-AspNet-Version: 2.0.50727 Location: /3DSS/EditSections.aspx?id=3&siteId=56&sectionId=46 Set-Cookie: .3DSS=A6CAC223D0F2517D77C7C68EEF069ABA85E9392E93417FFA4209E2621B8DCE38174AD699C9F0221D30D49E108CAB8A828408CF214549A949501DAFAF59F080375A50162361E4AA94E08874BF0945B2EF; path=/; HttpOnly Cache-Control: private Content-Type: text/html; charset=utf-8 Content-Length: 184 object moved here Where "here" is a link that points to a URL just like the one I'm requesting, except with an extra folder in it, meaning something like: http://123.1.2.3/MySite//MySite/Page.aspx?option=1 instead of: http://123.1.2.3/MySite/Page.aspx?option=1 Update: A colleague of mine found some info saying it might be because the test servers are running iis in 64 bit (64bit win 2003) (prod servers are 32 bit win 2003). So we tried telling IIS to use 32 bit: **cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1 %SYSTEMROOT%\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis.exe -i ** (from this MS support page) But iis stopped working altogether (got "server unavailable" on a white page instead of web sites). Reversing the above (see the link) didn't work at first either. The ASP.NET tab disappeared from our IIS web site properties and we had to mess around for an hour uninstalling (aspnet_regiis.exe -u) and reinstalling 32 bit ASP.NET and adding Default.aspx manually back into default documents. We'll probably try again in a few days, if anyone has anything to add in the meantime, please do.

  Read the article

• How can i use a duration setting on .animate if it is inside the callback from a .fadeOut effect?

  - by Jannis

  I am trying to just fade the content of section#secondary out and once the content has been faded out, the parent (section#secondary) should animate 'shut' in a slider animation. All this is working however the durations are not and I cannot figure out why. Here is my code: HTML <section id="secondary"> <a href="#" class="slide_button">&laquo;</a> <!-- slide in/back button --> <article> <h1>photos</h1> <div class="album_nav"><a href="#">photo 1 of 6</a> | <a href="#">create an album</a></div> <div class="bar"> <p class="section_title">current image title</p> </div> <section class="image"> <div class="links"> <a class="_back album_link" href="#">« from the album: james new toy</a> <nav> <a href="#" class="_back small_button">back</a> <a href="#" class="_next small_button">next</a> </nav> </div> <img src="http://localhost/~jannis/3781_doggie_wonderland/www/preview/static/images/sample-image-enlarged.jpg" width="418" height="280" alt="" /> </section> </article> <footer> <embed src="http://localhost/~jannis/3781_doggie_wonderland/www/preview/static/flash/secondary-footer.swf" wmode="transparent" width="495" height="115" type="application/x-shockwave-flash" /> </footer> </section> <!-- close secondary --> jQuery // ============================= // = Close button (slide away) = // ============================= $('a.slide_button').click(function() { $(this).closest('section#secondary').children('*').fadeOut('slow', function() { $('section#secondary').animate({'width':'0'}, 3000); }); }); Because the content of section#secondary is variable I use the * selector. What happens is that the fadeOut uses the appropriate slow speed but as soon as the callback fires (once the content is faded out) the section#secondary animates to width: 0 within a couple of milliseconds and not the 3000 ms ( 3 sec ) I set the animation duration to. Any ideas would be appreciated. PS: I cannot post an example at this point but since this is more a matter of theory of jQuery I don't think an example is necessary here. Correct me if I am wrong..

  Read the article

• Query Results Not Expected

  - by E-Madd

  I've been a CF developer for 15 years and I've never run into anything this strange or frustrating. I've pulled my hair out for hours, googled, abstracted, simplified, prayed and done it all in reverse. Can you help me? A cffunction takes one string argument and from that string I build an array of "phrases" to run a query with, attempting to match a location name in my database. For example, the string "the republic of boulder" would produce the array: ["the","republic","of","boulder","the republic","the republic of","the republic of boulder","republic of","republic of boulder","of boulder"]. Another cffunction uses the aforementioned cffunction and runs a cfquery. A query based on the previously given example would be... select locationid, locationname, locationaliasname from vwLocationsWithAlias where LocationName in ('the','the republic','the republic of','republic','republic of','republic of boulder','of','of boulder','boulder') or LocationAliasName in ('the','the republic','the republic of','republic','republic of','republic of boulder','of','of boulder','boulder') This returns 2 records... locationid - locationname - locationalias 99 - 'Boulder' - 'the republic' 68 - 'Boulder' - NULL This is good. Works fine and dandy. HOWEVER... if the string is changed to "the republic", resulting in the phrases array ["the","republic","the republic"] which is then used to produce the query... select locationid, locationname, locationaliasname from vwLocationsWithAlias where LocationName in ('the','the republic','republic') or LocationAliasName in ('the','the republic','republic') This returns 0 records. Say what?! OK, just to make sure I'm not involuntarily HIGH I run that very same query in my SQL console against the same database in the cf datasource. 1 RECORD! locationid - locationname - locationalias 99 - 'Boulder' - 'the republic' I can even hard-code that sql within the same cffunction and get that one result, but never from the dynamically generated SQL. I can get my location phrases from another cffunction of a different name that returns hard-coded array values and those work, but never if the array is dynamically built. I've tried removing cfqueryparams, triple-checking my datatypes, datasource setups, etc., etc., etc. NO DICE WTF!? Is this an obscure bug? Am I losing my mind? I've tried everything I can think of and others (including Ray Camden) can think of. ColdFusion 8 (with all the latest hotfixes) SQL Server 2005 (with all the greatest service packs) Windows 2003 Server (with all the latest updates, service packs and nightly MS voodoo)

  Read the article

• jquery ajax error cannot find url outside of debug mode

  - by John Orlandella Jr.

  I inherited some code two weeks ago that is using the jquery.ajax method to connect to a .NET web service. Here is the piece of code give me the trouble... if (MSCTour.AppSettings.OFFLINE !== 'TRUE') { $.ajax({ url: url, data: json, type: "POST", contentType: "application/json", timeout: 10000, dataType: "json", // not "json" we'll parse success: function(res){ if (!callback) { return; } /* // *** Use json library so we can fix up MS AJAX dates */ var result = ""; if (res !== "") { try { result = $.evalJSON(res); } catch (e) { result = {}; bare = true; } } /* // *** Bare message IS result */ if (bare) { callback(result); return; } /* // *** Wrapped message contains top level object node // *** strip it off */ for (var property in result) { callback(result[property]); break; } }, error: function(xhr,status,error){ if (status === 'parsererror') {} else {return error;} }, complete: function(res, status){ if (callback) { if ((status != 'success' && status != 'error') || status === 'parsererror' || (status === 'timeout' && res !== '')) { try { result = $.secureEvalJSON(res); } catch (e) { result = {}; bare = true; } callback(res); } } return; } }); } The url variable at this point equals /testsite/service.svc/GetItems Now here is where my problem lies... When running this site out of debug mode through visual studio I am not having any problem connecting to the database through the web service and seeing all my data, for both viewing and updating. When I go through the normal web server for the same site, on the same page, no data is showing up. When I put a break on the error portion of the code above in firebug this is information I am getting in the image linked below. link text I am getting what appears to be a 404 error, but when I look on the server all of the files are in the right place... coupled with the fact that it works when in debug mode, I think I am slowly going crazy staring at these same lines of code trying to find the needle in the haystack. Any help or just a direction to look in would be greatly appreciated.

  Read the article

• Lazy loading the addthis script? (or lazy loading external js content dependent on already fired eve

  - by Keith Bentrup

  I want to have the addthis widget available for my users, but I want to lazy load it so that my page loads as quickly as possible. However, after trying it via a script tag and then via my lazy loading method, it appears to only work via the script tag. In the obfuscated code, I see something that looks like it's dependent on the DOMContentLoaded event (at least for firefox). Since the DOMContentLoaded event has already fired, the widget doesn't render properly. What to do? I could just use a script tag (slower)... or could I fire (in a cross browser way) the DOMContentLoaded (or equivalent) event? I have a feeling this may not be possible b/c I believe that (like jQuery) there are multiple tests of the content ready event, and so multiple simulated events would have to occur. Nonetheless, this is an interesting problem b/c I have seen a couple widgets now assume that you are including their stuff via static script tags. It would be nice if they wrote code that was more useful to developers concerned about speed, but until then, is there a work around?? And/or are any of my assumptions wrong? Edit: Because the 1st answer to the question seemed to miss the point of my problem, I wanted to clarify the situation. This is about a specific problem. I'm not looking for yet another lazy load script or check if some dependencies are loaded script. Specifically this problem deals with external widgets that you do not have control over and may or may not be obfuscated delaying the load of the external widgets until they are needed or at least, til substantially after everything else has been loaded including other deferred elements b/c of the how the widget was written, precludes existing, typical lazy loading paradigms While it's esoteric, I have seen it happen with a couple widgets - where the widget developers assume that you're just willing to throw in another script tag at the bottom of the page. I'm looking to save those 500-1000 ms** though as numerous studies by yahoo, google, and amazon show it to be important to your user's experience. **My testing with hammerhead and personal experience indicates that this will be my savings in this case.

  Read the article

• WPF - Random hanging with file browser attached behaviour.

  - by Stimul8d

  Hi, I have an attached behavior defined thusly,.. public static class FileBrowserBehaviour { public static bool GetBrowsesOnClick(DependencyObject obj) { return (bool)obj.GetValue(BrowsesOnClickProperty); } public static void SetBrowsesOnClick(DependencyObject obj, bool value) { obj.SetValue(BrowsesOnClickProperty, value); } // Using a DependencyProperty as the backing store for BrowsesOnClick. This enables animation, styling, binding, etc... public static readonly DependencyProperty BrowsesOnClickProperty = DependencyProperty.RegisterAttached("BrowsesOnClick", typeof(bool), typeof(FileBrowserBehaviour), new FrameworkPropertyMetadata(false, new PropertyChangedCallback(BrowsesOnClickChanged))); public static void BrowsesOnClickChanged(DependencyObject obj, DependencyPropertyChangedEventArgs args) { FrameworkElement fe = obj as FrameworkElement; if ((bool)args.NewValue) { fe.PreviewMouseLeftButtonDown += new MouseButtonEventHandler(OpenFileBrowser); } else { fe.PreviewMouseLeftButtonDown -= new MouseButtonEventHandler(OpenFileBrowser); } } static void OpenFileBrowser(object sender, MouseButtonEventArgs e) { var tb = sender as TextBox; if (tb.Text.Length < 1 || tb.Text=="Click to browse..") { OpenFileDialog ofd = new OpenFileDialog(); ofd.Filter = "Executables | *.exe"; if (ofd.ShowDialog() == true) { Debug.WriteLine("Setting textbox text-" + ofd.FileName); tb.Text = ofd.FileName; Debug.WriteLine("Set textbox text"); } } } } It's a nice simple attached behavior which pops open an OpenFileDialog when you click on a textbox and puts the filename in the box when you're done. It works maybe 40% of the time but the rest of the time the whole app hangs. The call stack at this point looks like this - [Managed to Native Transition] WindowsBase.dll!MS.Win32.UnsafeNativeMethods.GetMessageW(ref System.Windows.Interop.MSG msg, System.Runtime.InteropServices.HandleRef hWnd, int uMsgFilterMin, int uMsgFilterMax) + 0x15 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.GetMessage(ref System.Windows.Interop.MSG msg, System.IntPtr hwnd, int minMessage, int maxMessage) + 0x48 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame frame = {System.Windows.Threading.DispatcherFrame}) + 0x8b bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame frame) + 0x49 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.Run() + 0x4c bytes PresentationFramework.dll!System.Windows.Application.RunDispatcher(object ignore) + 0x1e bytes PresentationFramework.dll!System.Windows.Application.RunInternal(System.Windows.Window window) + 0x6f bytes PresentationFramework.dll!System.Windows.Application.Run(System.Windows.Window window) + 0x26 bytes PresentationFramework.dll!System.Windows.Application.Run() + 0x19 bytes Debugatron.exe!Debugatron.App.Main() + 0x5e bytes C# [Native to Managed Transition] [Managed to Native Transition] mscorlib.dll!System.AppDomain.nExecuteAssembly(System.Reflection.Assembly assembly, string[] args) + 0x19 bytes mscorlib.dll!System.Runtime.Hosting.ManifestRunner.Run(bool checkAptModel) + 0x6e bytes mscorlib.dll!System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly() + 0x84 bytes mscorlib.dll!System.Runtime.Hosting.ApplicationActivator.CreateInstance(System.ActivationContext activationContext, string[] activationCustomData) + 0x65 bytes mscorlib.dll!System.Runtime.Hosting.ApplicationActivator.CreateInstance(System.ActivationContext activationContext) + 0xa bytes mscorlib.dll!System.Activator.CreateInstance(System.ActivationContext activationContext) + 0x3e bytes Microsoft.VisualStudio.HostingProcess.Utilities.dll!Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone() + 0x23 bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart_Context(object state) + 0x66 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x6f bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x44 bytes Now, I've seen this kind of thing before when doing some asynchronous stuff but there's none of that going on at that point. The only thread alive is the UI thread! Also, I always get that last debug statement when it does hang. Can anyone point me in the right direction? This one's driving me crazy!

  Read the article

• When is #include <new> library required in C++?

  - by Czarak

  Hi, According to this reference entry for operator new ( http://www.cplusplus.com/reference/std/new/operator%20new/ ) : Global dynamic storage operator functions are special in the standard library: All three versions of operator new are declared in the global namespace, not in the std namespace. The first and second versions are implicitly declared in every translation unit of a C++ program: The header does not need to be included for them to be present. This seems to me to imply that the third version of operator new (placement new) is not implicitly declared in every translation unit of a C++ program and the header <new> does need to be included for it to be present. Is that correct? If so, how is it that using both g++ and MS VC++ Express compilers it seems I can compile code using the third version of new without #include <new> in my source code? Also, the MSDN Standard C++ Library reference entry on operator new gives some example code for the three forms of operator new which contains the #include <new> statement, however the example seems to compile and run just the same for me without this include? // new_op_new.cpp // compile with: /EHsc #include<new> #include<iostream> using namespace std; class MyClass { public: MyClass( ) { cout << "Construction MyClass." << this << endl; }; ~MyClass( ) { imember = 0; cout << "Destructing MyClass." << this << endl; }; int imember; }; int main( ) { // The first form of new delete MyClass* fPtr = new MyClass; delete fPtr; // The second form of new delete char x[sizeof( MyClass )]; MyClass* fPtr2 = new( &x[0] ) MyClass; fPtr2 -> ~MyClass(); cout << "The address of x[0] is : " << ( void* )&x[0] << endl; // The third form of new delete MyClass* fPtr3 = new( nothrow ) MyClass; delete fPtr3; } Could anyone shed some light on this and when and why you might need to #include <new> - maybe some example code that will not compile without #include <new> ? Thanks.

  Read the article

• Ajax doesn't trigger a change-event on a webkit based browser

  - by user319464

  I have adapted a Jquery plugin to for-fill my needs to send GET requests to servers as a way of "pinging" them. I've also added some javascript code to add some fancy features like: depending on the changed value in a that the Jquery plugin changes, it changes the Icon accordingly. To make it all work essentially, I made so that when Ajax gets a "complete" event, it forces a "onChange" event to the span, triggering the javascript validation function to change the status icons. Here is the code of my slightly modified jQuery Plugin: /** * ping for jQuery * * Adapted by Carroarmato0 (to actually work instead of randomly "pinging" nowhere instead of faking * * @auth Jessica * @link http://www.skiyo.cn/demo/jquery.ping/ * */ (function($) { $.fn.ping = function(options) { var opts = $.extend({}, $.fn.ping.defaults, options); return this.each(function() { var ping, requestTime, responseTime ; var target = $(this); var server = target.html(); target.html('<img src="img/loading.gif" alt="loading" />'); function ping() { $.ajax({url: 'http://' + server, type: 'GET', dataType: 'html', timeout: 30000, beforeSend : function() { requestTime = new Date().getTime(); }, complete : function() { responseTime = new Date().getTime(); ping = Math.abs(requestTime - responseTime); if (ping > 2000) { target.text('niet bereikbaar'); } else { target.text(ping + opts.unit); } target.change(); } }); } ping(); opts.interval != 0 && setInterval(ping,opts.interval * 1000); }); }; $.fn.ping.defaults = { interval: 3, unit: 'ms' }; })(jQuery); target.change(); is the code that triggers the "onchange" event in the span: echo " <td class=\"center\"><span id=\"ping$pingNb\" onChange=\"checkServerIcon(this)\" >" .$server['IP'] . "</span></td>"; In Firefox this works, checkServerIcon(this) gets executed and passes the span object to the function. function checkServerIcon(object) { var delayText = object.innerHTML; var delay = delayText.substring(0, delayText.length - 2); if ( isInteger(delay) ) { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/enable_server.png'; } else { if (delay == "bezig.") { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/search_server.png'; } else { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/desable_server.png'; } } } My guess would be that there's something different in WebKit browsers in the way object.parentNode.previousSibling.parentNode. .... works...

  Read the article

• Can't read excel file after creating it using File.WriteAllText() function

  - by Srikanth Mattihalli

  public void ExportDataSetToExcel(DataTable dt) { HttpResponse response = HttpContext.Current.Response; response.Clear(); response.Charset = "utf-8"; response.ContentEncoding = Encoding.GetEncoding("utf-8"); response.ContentType = "application/vnd.ms-excel"; Random Rand = new Random(); int iNum = Rand.Next(10000, 99999); string extension = ".xls"; string filenamepath = AppDomain.CurrentDomain.BaseDirectory + "graphs\\" + iNum + ".xls"; string file_path = "graphs/" + iNum + extension; response.AddHeader("Content-Disposition", "attachment;filename=\"" + iNum + "\""); string query = "insert into graphtable(graphtitle,graphpath,creategraph,year) VALUES('" + iNum.ToString() + "','" + file_path + "','" + true + "','" + DateTime.Now.Year.ToString() + "')"; try { int n = connect.UpdateDb(query); if (n > 0) { resultLabel.Text = "Merge Successfull"; } else { resultLabel.Text = " Merge Failed"; } resultLabel.Visible = true; } catch { } using (StringWriter sw = new StringWriter()) { using (HtmlTextWriter htw = new HtmlTextWriter(sw)) { // instantiate a datagrid DataGrid dg = new DataGrid(); dg.DataSource = dt; //ds.Tables[0]; dg.DataBind(); dg.RenderControl(htw); File.WriteAllText(filenamepath, sw.ToString()); // File.WriteAllText(filenamepath, sw.ToString(), Encoding.UTF8); response.Write(sw.ToString()); response.End(); } } } Hi all, I have created an excel sheet from datatable using above function. I want to read the excel sheet programatically using the below connectionstring. This string works fine for all other excel sheets but not for the one i created using the above function. I guess it is because of excel version problem. OleDbConnection conn= new OleDbConnection("Data Source='" + path +"';provider=Microsoft.Jet.OLEDB.4.0;Extended Properties=Excel 8.0;";); Can anyone suggest a way by which i can create an excel sheet such that it is readable again using above query. I cannot use Microsoft InterOp library as it is not supported by my host.

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >