Search Results

Search found 7985 results on 320 pages for 'multi byte'.

Page 245/320 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

  • KVM recommendations

    - by alex
    I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

    Read the article

  • Uploadify Flash Uploader and Random UPLOAD_ERR_CANT_WRITE errors

    - by dcneiner
    I am using Uploadify to provide progress bar support for file uploads on a PHP app I built. It works perfectly for a few uploads,then every few uploads it fails and the data from the $_FILES array reveals an UPLOAD_ERR_CANT_WRITE error. (Error code 7). I ran Paros proxy between my browser and the server to see the difference between a passing and failing request. The only difference was the content separator for the multi-part post which changes every time. I would conclude this was fully a server error, except with a plain jane form, I cannot reproduce the error. I am not a server guy, so please let me know what information is needed to troubleshoot this and I will update the question with those details. I did place these lines in the .htaccess, but to know avail. The site is hosted on Rackspace Cloudsites so my configuration options are limited: <IfModule mod_security.c> SecFilterEngine Off SecFilterScanPOST Off </IfModule> php_value upload_max_filesize 10M php_value post_max_size 10M php_value max_execution_time 200 php_value max_input_time 200

    Read the article

  • TeamCity EC2 Integration via ISA Server

    - by Tim Long
    I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

    Read the article

  • ClearOS - how to create a site to site VPN between two ClearOS boxes?

    - by Scott Szretter
    I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

    Read the article

  • Zimbra MTA settings

    - by user192702
    Hi have some questions for Zimbra v8.0.6GA. Under Configure - MTA - Network, I'm seeing a few settings and am not very clear what to do with them. Web mail MTA Host name Is this for delivering local mail only (ie not for external mails)? According to this link, it says the following. That's a mouthful but what is "composed messages"? Is this for a multi server deployment where the Postfix server for Zimbra isn't installed on the same box that as the rest of the servers? Webmail MTA is used by the Zimbra server for composed messages and must be the location of the Postfix server in the Zimbra MTA. Relay MTA for external delivery My understanding after reading the doc is that if my ISP doesn't force me to relay outgoing mails through them, and I have enabled DNS lookup, I can leave this blank? Inbound SMTP host name Sorry I know this is explained as "If your MX records point to a spam-relay or any other external non-Zimbra server, enter the name of that server in the Inbound SMTP host name field." but I'm not following. Can someone provide an example? MTA Trusted Networks The admin doc says "To set up MTA trusted networks on a per server basis, make sure that MTA trusted networks have been set up as global settings and then go the Configure Servers MTA page and in the MTA Trusted Networks field enter the trusted network addresses for the server." However I see out of the box it has default networks setup for the server whereas on a global level it's blank. Does this mean there is a bug with the install software and I have to copy the setting from the server to the global setting?

    Read the article

  • Auto load balancing two node Cluster Hyper-v 2008 R2 enterprise?

    - by Kristofer O
    My setup is a 2 node cluster with 72GB ram each and a ~10TB MD3000i Iscsi SAN. I have about 30VMs running I keep about 15 on either server. I do a live migration to the other server if I need to run updates or whatever... Either one of the servers is able of running all VM if needed, but the cpu is pretty high. Here's my issues. I know Hyper-v has a limit of a single Live-migration at a time. But Why doesn't it queue them up to move one at a time? If I multi select I don't get the option to live migrate a one at a time. OR if I'm in the process of Migrating one it will give me an error that it's currently migrating a VM... Is there a button I missed that will tell a Node that it needs to migrate all the VMs elsewhere? Another question, does anyone know whats the best way to load balance VMs based on CPU and/or network utilzation. I have some VMs that don't do much. and some that trash the CPU or network. I'd like to balance it out on both servers if at all possible. and Is there any way to automate it? last question... If I overcommit my Cluster is there a way to tell the cluster that I want certian VMs the be running and to savestate other VMs based on availible system resources? Say when my one node blue screens and the other node begins starting the VMs up. I want the unimportant ones to shutdown or savestate so the important ones can stay running or come back online. Thanks just for reading all that. Any help would be great.

    Read the article

  • ADSL throughput loss from Reed-Solomon encoding

    - by javano
    I'm reading about ADSL starting here and I am confused by how the Reed-Solomon encoding for ECC is limiting the available transfer rate, as much as it does (nearly half). This pdf on the same subject contains the following; A maximum of 255 sub-carriers can be used to modulate data in the downstream direction. Sub-carrier 256, the downstream Nyquist frequency, and sub-carrier 64, the downstream pilot frequency, are not available for user data, thus limiting the total number of available downstream sub-carriers to 254. Each of these 254 sub-carriers can support the modulation of 0 to 15 bits. Since the ADSL DMT data frame rate is 4000 frames per second, the maximum theoretical downstream data rate of an ADSL system is 15.24Mbps. Due to limitations in system architecture, specifically the maximum allowable Reed-Solomon codeword size (255 bytes), the maximum achievable downstream data rate is 8.16Mbps. How is this nearly halving the throughput? Is all that extra bandwidth overhead of the RS encoding? 15240000 bps (15.24Mbps) - 8160000 bps (8.12Mbps) = 7080000 bps (7.08Mbps). Where has that 7Mbps of throughput gone? EDIT: I tried to read the wiki page on Reed-Soloman but it's all crazy maths and algerbra, which I don't understand. I can understand that data is split into 255 byte codewords, because that maybe the max codeword size whilst still maintaining accuracy during transmission; But I don't understand why that means less data is sent?

    Read the article

  • Contacts Issue: Google Contacts, Nokia 5800 And Outlook, Sync and Images

    - by josecortesp
    Hello everyone, this is a multi-question, so please, feel free to answer just one or all of them. My actual situation is: Google contacts sync with Nokia 5800 using MFE(google sync), using google's fake "exchange server". Outlook sync with google using GoContact Sync software (http://www.webgear.co.nz/Products/GOContactSync.aspx). What I want, a easy(or not) way to correctly sync the three of them, even if I have to change some of my "escenario". I know outlook<-google contacts sync is not good yet, but if someone can suggest me some better SW than GoContact Sync. It'll be good. What I really want is to sync a least name, phone, email and image. Then, is there a way to get all my google contacts to by default use their own google image? I noted that, usually i have to manually choose it, and sometimes it doesn't work. I'll like to use something or someone's service to do this automatically. I have tried some services like Soocial, but it gives me a lot of trouble after the first sync, because soccial can ONLY get ALL your contacts, not just "My Contacts"; and also it gives me like 100 bad contacts in outlook because of their beta client. The final goal of all of this is to Get only "My Contacts" from google in Outlook and in the 5800 with their images Get ALL my contacts with their default image, meaning, the contact's personal image Get a solution to correctly sync the three of them, using Google's as the base for the rest of them. Thanks in advance. Again, feel free to sugest me solutions to just one or all them.

    Read the article

  • How do I prevent Pidgin from loading XMPP chat room history on join?

    - by Mr. Jefferson
    In Pidgin, when I join a chat room, it loads the chat room history. iChat on the Mac has a preference in the Accounts section to set a variable amount of history to load, or disable loading history entirely. How do I do the same thing in Pidgin? Is there a preference somewhere that I've missed? The object is to have the chat room start fresh each day, so I'd also be fine with disabling chat room history entirely on the server if that's possible. But I didn't see that option either when I looked in Server Admin on the server. I found this list of XMPP room types, and it looks like creating a Temporary Room might be the best way to do this, but I don't want to have to create the room manually every morning. Right now I've got Pidgin set to auto-join the room when I log in; I want it to do that without loading history. EDIT: The XMPP multi-user chat spec referenced above also contains a section on managing history. And I got this to work by pulling up the XMPP Console plugin in Pidgin, copying the <presence /> stanza it sent when I joined the room, closing the room, pasting the stanza into the console, adding the <history /> element and sending it. When I opened the room again, I had no history. But it all came back the next time! So: how do I get Pidgin to send the <history /> stanza by default?

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Still about SSD potentials...write and read speed

    - by Macroideal
    I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

    Read the article

  • Probelms Intstalling Trac using apt-get Ubuntu Jaunty

    - by Ben Waine
    Hi, I'm having some issues getting apt to install trac correctly on my Ubuntu Jaunty Box. Using the command 'apt-get install trac' I get the following output: root@myserver:~# apt-get install trac Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: trac: Depends: python-setuptools (> 0.5) but it is not installable Depends: python-pysqlite2 (>= 2.3.2) but it is not going to be installed Depends: python-subversion but it is not installable Depends: libjs-jquery but it is not installable Recommends: python-pygments (= 0.6) but it is not installable or enscript but it is not installable Recommends: python-tz but it is not installable E: Broken packages I have successfully used the command on my karmic kola desktop machine and am able to create new projects etc. I thought I might be able to solve the problem by installing all python related extensions. This produced a very similar output. I have Main, universe and multi-verse repositories enabled. Its a remote machine and I have no access to the gui. Hope someone can help, googleing failed to solve the issue or find a solution! Thanks, Ben

    Read the article

  • Is it necessary to burn-in RAM for server-class systems?

    - by ewwhite
    When using server-class systems with ECC RAM, is it necessary or even useful to burn-in the memory DIMMs prior to deployment? I've encountered an environment where all server RAM is placed through a lengthy multi-day burn-in/stress-tesing process. This has delayed system deployments on occasion and adds an extra step to the hardware lead-time. The server hardware is primarily Supermicro, so the RAM is sourced from a variety of vendors; not directly from the manufacturer like a Dell Poweredge or HP ProLiant. Is this process useful? In my past experience, I simply used vendor RAM out of the box. Isn't that what the POST memory tests are for? I've encountered and responded to ECC errors long before a DIMM actually failed. The ECC thresholds were usually the trigger for warranty placement. Do you burn your RAM in? If so, what method do you use to perform the tests? Has the burn-in process resulted in any additional platform stability? Has it identified any pre-deployment problems?

    Read the article

  • Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

    - by Brooks Moses
    I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

    Read the article

  • FreeBSD Traffic Shaping

    - by alexus
    Hi I'm trying to do traffic shaping with FreeBSD, here are my rules su-3.2# ipfw show | grep pipe 08380 1514852 125523804 pipe 1 tcp from any to any dst-port 80 su-3.2# ipfw pipe 1 show 00001: 2.000 Mbit/s 0 ms 50 sl. 1 queues (1 buckets) droptail mask: 0x00 0x00000000/0x0000 - 0x00000000/0x0000 BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp 0 tcp 64.237.55.83/60598 72.21.81.133/80 6520267 1204533020 0 0 1216 su-3.2# first of all why when I run ipfw pipe 1 show i get same source and destination ip, that doesnt seem like ever change yet total packets/bytes increasing and most important question, after donig all that I'm looking at my MRTG stats and I see i'm very well over 2Mbit/s limit. what am I doing wrong? here is config file flush pipe flush pipe 1 config bw 2Mbit/s add 100 allow ip from any to any via lo0 add 200 deny ip from any to 127.0.0.0/8 add 300 deny ip from 127.0.0.0/8 to any add 8380 pipe 1 tcp from any to any src-port www uid daemon add 8380 pipe 1 tcp from any to any dst-port www uid daemon add 65000 pass all from any to any

    Read the article

  • Parallel port blocking

    - by asalamon74
    I have a legacy Java program which handles a special card printer by sending binary data to the LPT1 port (no printer driver is involved, the Java program creates the binary stream). The program was working correctly with the client's old computer. The Java program sent all the bytes to the printer and after sending the last byte the program was not blocked. It took an other minute to finish the card printing, but the user was able to continue the work with the program. After changing the client's computer (but not the printer, or the Java program), the program does not finish the task till the card is ready, it is blocked until the last second. It seems to me that LPT1 has a different behavior now than was before. Is it possible to change this in Windows? I've checked BIOS for parallel port settings: The parallel port is set to EPP+ECP (but also tried the other two options: Bidirectional, Output only). Maybe some kind of parallel port buffer is too small? How can I increase it?

    Read the article

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • mcelog doesn't fails to start PUIAS 6.4 amd hardware

    - by Predrag Punosevac
    Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

    Read the article

  • I need advices: small memory footprint linux mail server with spam filtering

    - by petermolnar
    I have a VPS which is originally destined to be a webserver but some minimal mail capabilities are needed to be deployed as well, including sending and receiving as standalone server. The current setup is the following: Postfix reveices the mail, the users are in virtual tables, stored in MySQL on connection all servers are tested with policyd-weight service against some DNSBLs all mail is runs through SpamAssassin spamd with the help of spamc client the mail is then delivered with Dovecot 2' LDA (local delivery agent), virtual users as well As you saw... there's no virus scanner running, and that's for a reason: clamav eats all the memory possible and also, virus mails are all filtered out with this setup (I've tested the same with ClamAV enabled for 1,5 years, no virus mail ever got even to ClamAV) I don't use amavisd and I really don't want to. You only need that monster if you have plenty of memory and lots of simultaneous scanners. It's also a nightmare to fine tune by hand. I run policyd-weight instead of policyd and native DNSBLs in postfix. I don't like to send someone away because a single service listed them. Important statement: everything works fine. I receive very small amount of spam, nearly never get a false positive and most of the bad mail is stopped by policyd-weight. The only "problem" that I feel the services at total uses a bit much memory alltogether. I've already cut the modules of spamassassin (see below), but I'd really like to hear some advices how to cut the memory footprint as low as possible, mostly: what plugins SpamAssassin really needs and what are more or less useless, regarding to my current postfix & policyd-weight setup? SpamAssassin rules are also compiled with sa-compile (sa-update runs once a week from cron, compile runs right after that) These are some of the current configurations that may matter, please tell me if you need anything more. postfix/master.cf (parts only) dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/bin/spamc -e /usr/lib/dovecot/deliver -d ${recipient} -f {sender} postfix/main.cf (parts only) smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_invalid_hostname, reject_non_fqdn_hostname, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_pipelining, reject_unauth_destination, check_policy_service inet:127.0.0.1:12525, permit policyd-weight.conf (parts only) $REJECTMSG = "550 Mail appeared to be SPAM or forged. Ask your Mail/DNS-Administrator to correct HELO and DNS MX settings or to get removed from DNSBLs"; $REJECTLEVEL = 4; $DEFER_STRING = 'IN_SPAMCOP= BOGUS_MX='; $DEFER_ACTION = '450'; $DEFER_LEVEL = 5; $DNSERRMSG = '450 No DNS entries for your MTA, HELO and Domain. Contact YOUR administrator'; # 1: ON, 0: OFF (default) # If ON request that ALL clients are only checked against RBLs $dnsbl_checks_only = 0; # 1: ON (default), 0: OFF # When set to ON it logs only RBLs which affect scoring (positive or negative) $LOG_BAD_RBL_ONLY = 1; ## DNSBL settings @dnsbl_score = ( # host, hit, miss, log name 'dnsbl.ahbl.org', 3, -1, 'dnsbl.ahbl.org', 'dnsbl.njabl.org', 3, -1, 'dnsbl.njabl.org', 'dnsbl.sorbs.net', 3, -1, 'dnsbl.sorbs.net', 'bl.spamcop.net', 3, -1, 'bl.spamcop.net', 'zen.spamhaus.org', 3, -1, 'zen.spamhaus.org', 'pbl.spamhaus.org', 3, -1, 'pbl.spamhaus.org', 'cbl.abuseat.org', 3, -1, 'cbl.abuseat.org', 'list.dsbl.org', 3, -1, 'list.dsbl.org', ); # If Client IP is listed in MORE DNSBLS than this var, it gets REJECTed immediately $MAXDNSBLHITS = 3; # alternatively, if the score of DNSBLs is ABOVE this level, reject immediately $MAXDNSBLSCORE = 9; $MAXDNSBLMSG = '550 Az levelezoszerveruk IP cime tul sok spamlistan talahato, kerjuk ellenorizze! / Your MTA is listed in too many DNSBLs; please check.'; ## RHSBL settings @rhsbl_score = ( 'multi.surbl.org', 4, 0, 'multi.surbl.org', 'rhsbl.ahbl.org', 4, 0, 'rhsbl.ahbl.org', 'dsn.rfc-ignorant.org', 4, 0, 'dsn.rfc-ignorant.org', # 'postmaster.rfc-ignorant.org', 0.1, 0, 'postmaster.rfc-ignorant.org', # 'abuse.rfc-ignorant.org', 0.1, 0, 'abuse.rfc-ignorant.org' ); # skip a RBL if this RBL had this many continuous errors $BL_ERROR_SKIP = 2; # skip a RBL for that many times $BL_SKIP_RELEASE = 10; ## cache stuff # must be a directory (add trailing slash) $LOCKPATH = '/var/run/policyd-weight/'; # socket path for the cache daemon. $SPATH = $LOCKPATH.'/polw.sock'; # how many seconds the cache may be idle before starting maintenance routines #NOTE: standard maintenance jobs happen regardless of this setting. $MAXIDLECACHE = 60; # after this number of requests do following maintenance jobs: checking for config changes $MAINTENANCE_LEVEL = 5; # negative (i.e. SPAM) result cache settings ################################## # set to 0 to disable caching for spam results. To this level the cache will be cleaned. $CACHESIZE = 2000; # at this number of entries cleanup takes place $CACHEMAXSIZE = 4000; $CACHEREJECTMSG = '550 temporarily blocked because of previous errors'; # after NTTL retries the cache entry is deleted $NTTL = 1; # client MUST NOT retry within this seconds in order to decrease TTL counter $NTIME = 30; # positve (i.,e. HAM) result cache settings ################################### # set to 0 to disable caching of HAM. To this number of entries the cache will be cleaned $POSCACHESIZE = 1000; # at this number of entries cleanup takes place $POSCACHEMAXSIZE = 2000; $POSCACHEMSG = 'using cached result'; #after PTTL requests the HAM entry must succeed one time the RBL checks again $PTTL = 60; # after $PTIME in HAM Cache the client must pass one time the RBL checks again. #Values must be nonfractal. Accepted time-units: s, m, h, d $PTIME = '3h'; # The client must pass this time the RBL checks in order to be listed as hard-HAM # After this time the client will pass immediately for PTTL within PTIME $TEMP_PTIME = '1d'; ## DNS settings # Retries for ONE DNS-Lookup $DNS_RETRIES = 1; # Retry-interval for ONE DNS-Lookup $DNS_RETRY_IVAL = 5; # max error count for unresponded queries in a complete policy query $MAXDNSERR = 3; $MAXDNSERRMSG = 'passed - too many local DNS-errors'; # persistent udp connection for DNS queries. #broken in Net::DNS version 0.51. Works with Net::DNS 0.53; DEFAULT: off $PUDP= 0; # Force the usage of Net::DNS for RBL lookups. # Normally policyd-weight tries to use a faster RBL lookup routine instead of Net::DNS $USE_NET_DNS = 0; # A list of space separated NS IPs # This overrides resolv.conf settings # Example: $NS = '1.2.3.4 1.2.3.5'; # DEFAULT: empty $NS = ''; # timeout for receiving from cache instance $IPC_TIMEOUT = 2; # If set to 1 policyd-weight closes connections to smtpd clients in order to avoid too many #established connections to one policyd-weight child $TRY_BALANCE = 0; # scores for checks, WARNING: they may manipulate eachother # or be factors for other scores. # HIT score, MISS Score @client_ip_eq_helo_score = (1.5, -1.25 ); @helo_score = (1.5, -2 ); @helo_score = (0, -2 ); @helo_from_mx_eq_ip_score= (1.5, -3.1 ); @helo_numeric_score= (2.5, 0 ); @from_match_regex_verified_helo= (1,-2 ); @from_match_regex_unverified_helo = (1.6, -1.5 ); @from_match_regex_failed_helo = (2.5, 0 ); @helo_seems_dialup = (1.5, 0 ); @failed_helo_seems_dialup= (2, 0 ); @helo_ip_in_client_subnet= (0,-1.2 ); @helo_ip_in_cl16_subnet = (0,-0.41 ); #@client_seems_dialup_score = (3.75, 0 ); @client_seems_dialup_score = (0, 0 ); @from_multiparted = (1.09, 0 ); @from_anon= (1.17, 0 ); @bogus_mx_score = (2.1, 0 ); @random_sender_score = (0.25, 0 ); @rhsbl_penalty_score = (3.1, 0 ); @enforce_dyndns_score = (3, 0 ); spamassassin/init.pre (I've put the .pre files together) loadplugin Mail::SpamAssassin::Plugin::Hashcash loadplugin Mail::SpamAssassin::Plugin::SPF loadplugin Mail::SpamAssassin::Plugin::Pyzor loadplugin Mail::SpamAssassin::Plugin::Razor2 loadplugin Mail::SpamAssassin::Plugin::AutoLearnThreshold loadplugin Mail::SpamAssassin::Plugin::MIMEHeader loadplugin Mail::SpamAssassin::Plugin::ReplaceTags loadplugin Mail::SpamAssassin::Plugin::Check loadplugin Mail::SpamAssassin::Plugin::HTTPSMismatch loadplugin Mail::SpamAssassin::Plugin::URIDetail loadplugin Mail::SpamAssassin::Plugin::Bayes loadplugin Mail::SpamAssassin::Plugin::BodyEval loadplugin Mail::SpamAssassin::Plugin::DNSEval loadplugin Mail::SpamAssassin::Plugin::HTMLEval loadplugin Mail::SpamAssassin::Plugin::HeaderEval loadplugin Mail::SpamAssassin::Plugin::MIMEEval loadplugin Mail::SpamAssassin::Plugin::RelayEval loadplugin Mail::SpamAssassin::Plugin::URIEval loadplugin Mail::SpamAssassin::Plugin::WLBLEval loadplugin Mail::SpamAssassin::Plugin::VBounce loadplugin Mail::SpamAssassin::Plugin::Rule2XSBody spamassassin/local.cf (parts) use_bayes 1 bayes_auto_learn 1 bayes_store_module Mail::SpamAssassin::BayesStore::MySQL bayes_sql_dsn DBI:mysql:db:127.0.0.1:3306 bayes_sql_username user bayes_sql_password pass bayes_ignore_header X-Bogosity bayes_ignore_header X-Spam-Flag bayes_ignore_header X-Spam-Status ### User settings user_scores_dsn DBI:mysql:db:127.0.0.1:3306 user_scores_sql_password user user_scores_sql_username pass user_scores_sql_custom_query SELECT preference, value FROM _TABLE_ WHERE username = _USERNAME_ OR username = '$GLOBAL' OR username = CONCAT('%',_DOMAIN_) ORDER BY username ASC # for better speed score DNS_FROM_AHBL_RHSBL 0 score __RFC_IGNORANT_ENVFROM 0 score DNS_FROM_RFC_DSN 0 score DNS_FROM_RFC_BOGUSMX 0 score __DNS_FROM_RFC_POST 0 score __DNS_FROM_RFC_ABUSE 0 score __DNS_FROM_RFC_WHOIS 0 UPDATE 01 As adaptr advised I remove policyd-weight and configured postfix postscreen, this resulted approximately -15-20 MB from RAM usage and a lot faster work. I'm not sure it's working at full capacity but it seems promising.

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • What are the advantages and disadvantages of the various virtual machine image formats?

    - by Matt
    Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

    Read the article

  • Why is uploading to S3 so slow?

    - by Tom Marthenal
    I am using s3cmd to upload to S3: # s3cmd put 1gb.bin s3://my-bucket/1gb.bin 1gb.bin -> s3://my-bucket/1gb.bin [1 of 1] 366706688 of 1073741824 34% in 371s 963.22 kB/s I am uploading from Linode, which has an outgoing bandwidth cap of 50 Mb/s according to support (roughly 6 MB/s). Why am I getting such slow upload speeds to S3, and how can I improve them? Update: Uploading the same file via SCP to an m1.medium EC2 instance (SCP from my Linode to the instance's EBS drive) gives about 44 Mb/s according to iftop (any compression done by the cipher is not a factor). Traceroute: Here's a traceroute to the server it's uploading to (according to tcpdump). # traceroute s3-1-w.amazonaws.com. traceroute to s3-1-w.amazonaws.com. (72.21.194.32), 30 hops max, 60 byte packets 1 207.99.1.13 (207.99.1.13) 0.635 ms 0.743 ms 0.723 ms 2 207.99.53.41 (207.99.53.41) 0.683 ms 0.865 ms 0.915 ms 3 vlan801.tbr1.mmu.nac.net (209.123.10.9) 0.397 ms 0.541 ms 0.527 ms 4 0.e1-1.tbr1.tl9.nac.net (209.123.10.102) 1.400 ms 1.481 ms 1.508 ms 5 0.gi-0-0-0.pr1.tl9.nac.net (209.123.11.62) 1.602 ms 1.677 ms 1.699 ms 6 equinix02-iad2.amazon.com (206.223.115.35) 9.393 ms 8.925 ms 8.900 ms 7 72.21.220.41 (72.21.220.41) 32.610 ms 9.812 ms 9.789 ms 8 72.21.222.141 (72.21.222.141) 9.519 ms 9.439 ms 9.443 ms 9 72.21.218.3 (72.21.218.3) 10.245 ms 10.202 ms 10.154 ms 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * The latency looks reasonable, at least until the server stopped responding to ping requests.

    Read the article

  • Traceroute, * at first router

    - by Jérôme
    When using traceroute on my mac to check the path to any website, the first line is always 3 stars. imac:~ Jerome$ traceroute google.com traceroute: Warning: google.com has multiple addresses; using 173.194.70.113 traceroute to google.com (173.194.70.113), 64 hops max, 52 byte packets 1 * * * 2 217-168-54-101.static.cablecom.ch (217.168.54.101) 9.515 ms 8.757 ms 10.104 ms 3 172.31.208.73 (172.31.208.73) 14.512 ms 14.605 ms 14.264 ms 4 ch-zrh01b-ra1-ae-1.aorta.net (84.116.134.142) 13.587 ms 12.892 ms 13.936 ms 5 74.125.49.101 (74.125.49.101) 13.966 ms 14.850 ms 14.915 ms 6 72.14.232.120 (72.14.232.120) 26.573 ms 72.14.232.88 (72.14.232.88) 20.072 ms 19.758 ms 7 72.14.236.68 (72.14.236.68) 26.913 ms 72.14.236.20 (72.14.236.20) 26.825 ms 72.14.239.62 (72.14.239.62) 25.381 ms 8 209.85.254.118 (209.85.254.118) 22.240 ms 22.365 ms 209.85.254.112 (209.85.254.112) 24.826 ms 9 * * * 10 fa-in-f113.1e100.net (173.194.70.113) 25.715 ms 26.960 ms 25.191 ms As far as I know, * means no answer from the router. How come I have stars at the very first line ?

    Read the article

  • Need help tuning Mysql and linux server

    - by Newtonx
    We have multi-user application (like MailChimp,Constant Contact) . Each of our customers has it's own contact's list (from 5 to 100.000 contacts). Everything is stored in one BIG database (currently 25G). Since we released our product we have the following data history. 5 years of data history : - users/customers (200+) - contacts (40 million records) - campaigns - campaign_deliveries (73.843.764 records) - campaign_queue ( 8 millions currently ) As we get more users and table records increase our system/web app is getting slower and slower . Some queries takes too long to execute . SCHEMA Table contacts --------------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------------+------------------+------+-----+---------+----------------+ | contact_id | int(10) unsigned | NO | PRI | NULL | auto_increment | | client_id | int(10) unsigned | YES | | NULL | | | name | varchar(60) | YES | | NULL | | | mail | varchar(60) | YES | MUL | NULL | | | verified | int(1) | YES | | 0 | | | owner | int(10) unsigned | NO | MUL | 0 | | | date_created | date | YES | MUL | NULL | | | geolocation | varchar(100) | YES | | NULL | | | ip | varchar(20) | YES | MUL | NULL | | +---------------------+------------------+------+-----+---------+----------------+ Table campaign_deliveries +---------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | newsletter_id | int(10) unsigned | NO | MUL | 0 | | | contact_id | int(10) unsigned | NO | MUL | 0 | | | sent_date | date | YES | MUL | NULL | | | sent_time | time | YES | MUL | NULL | | | smtp_server | varchar(20) | YES | | NULL | | | owner | int(5) | YES | MUL | NULL | | | ip | varchar(20) | YES | MUL | NULL | | +---------------+------------------+------+-----+---------+----------------+ Table campaign_queue +---------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------------+------+-----+---------+----------------+ | queue_id | int(10) unsigned | NO | PRI | NULL | auto_increment | | newsletter_id | int(10) unsigned | NO | MUL | 0 | | | owner | int(10) unsigned | NO | MUL | 0 | | | date_to_send | date | YES | | NULL | | | contact_id | int(11) | NO | MUL | NULL | | | date_created | date | YES | | NULL | | +---------------+------------------+------+-----+---------+----------------+ Slow queries LOG -------------------------------------------- Query_time: 350 Lock_time: 1 Rows_sent: 1 Rows_examined: 971004 SELECT COUNT(*) as total FROM contacts WHERE (contacts.owner = 70 AND contacts.verified = 1); Query_time: 235 Lock_time: 1 Rows_sent: 1 Rows_examined: 4455209 SELECT COUNT(*) as total FROM contacts WHERE (contacts.owner = 2); How can we optimize it ? Queries should take no more than 30 secs to execute? Can we optimize it and keep all data in one BIG database or should we change app's structure and set one single database to each user ? Thanks

    Read the article

  • Does water damage a fiber optic / cat5 cable

    - by chris
    One of the buildings I support recently had an adventure with a broken fire sprinkler. Lots of water everywhere. One of the "drains" the water used was the vertical risers between network closets. The cable plant in this building has bundles of cat5e as well as conduit with bundles of multimode fiber optic cables. The fiber is standard multi strand plenum rated stuff that terminates in boxes that have the patches to the switches. As far as I can tell, no water got near the ends of the cables (fiber or copper) but the conduit was saturated, and is likely still saturated because there isn't any air flow to dry the cables out. My gut reaction is that while it didn't do the cables any favors, it likely also isn't going to cause any problems. A little more reading / googling around leads me to believe that the water may cause problems down the road. Some pretty pictures so everyone knows what I'm talking about: Fiber conduit: Vertical riser, going down: Vertical riser, going up: Does anyone have any experience with this sort of damage and how to deal with it? Should we just ask the insurance adjuster to add "pull new structured cable" to the list of things to be replaced? And, if the opinion is "replace it because it'll start failing randomly over time" please include links that describe the specific failure modes, so I've got some ammo to use with the adjuster.

    Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >