Search Results

Search found 23399 results on 936 pages for 'configuration manager'.

Page 246/936 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• How do I add an Approver to SharePoint 2010?

  - by CompGeekess

  I am still new to SharePoint and am learning so much, but have came in to a few hic-ups and here is one. I want to add an approver to SharePoint 2010 who has FULL CONTROL. My manager requested that I find out where the approval request are going and redirect them to him. (I have no idea where or how to find this out). Is this possible to do on the Central Administration or must I go into each site/subsite and set him to be the approver this way? Googled and the site was showing me how to approve workflows or how to create approvals, my other resources didn't give much help either. So far I had gone into a few individual sites and set my manager and I up as approvers with full control, but am uncertain if this is the correct procedure or if there is a better way to do this. For example, have the lower levels inherit from the higher level - set security at the highest level and cascade to the child levels. Thank You.

  Read the article

• Wrong version of php used be IIS

  - by user1070125

  Long ago I installed php5.2 using a installer on IIS. Recently I installed PHP Manager and upgraded to php5.3 simly by unzipping the downloaded file and then used the "Register new php version" in PHP Manager. I did this for the global scope for all sites. This works OK. Once in a blue moon errors are written to the php5.2 errorlog even though that verion is not used anymore. The errors are typical 5.3 specfic functions that are not supported in 5.2. How can it be? Can I safely uninstall php5.2 using the uninstaller (i think it added some stuff to the env paths)?

  Read the article

• What is OpenSVC?

  - by sh-beta

  OpenSVC was just ported to the FreeBSD platform. The little blurb in that announcement intrigued me so I went to the OpenSVC website and found this: OpenSVC is a 'service' manager, as in clustered service manager, designed for real-world heterogeneous datacenters and large-scale operations orchestrator (disaster recovery, for example). Services are collections of resources (virtual machine, ip, disk groups, filesystems, file synchronizations, and application launchers). Services can be started, stopped and queried for status, providing a consistent command set for wildly different service integration types. Service configurations, status and logs are pushed to a central database coupled to a web front-end (collector). Services can be administered using the stand-alone GPLv2 software stack deployed on the nodes (nodeware), or through the web-front end. Plus some UML-type graphics. Which is all neat, but I still don't understand: what does it do? Am I just being dense? What's the use case for this system?

  Read the article

• How to configure a Web.Config file to allow custom 404 handling while still displaying on-page 500 error detail?

  - by Mark

  To customize 404 handling and based on the hosting company's suggestion, we are currently using the following web.config setup. However, we quickly realized that with this configuration, any page error (500 error) are also getting redirected to this custom error page. How can I modify this config file so we can continue to handle 404 with custom file while still able to view on-page error? <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.webServer> <httpErrors errorMode="DetailedLocalOnly" defaultPath="/Custom404.html" defaultResponseMode="ExecuteURL"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="/Custom404.html" responseMode="ExecuteURL" /> </httpErrors> </system.webServer> <system.web> <customErrors mode="On"> <error statusCode="404" redirect="/Custom404.html" /> </customErrors> </system.web> </configuration>

  Read the article

• Can't connect to IIS7 on one of my machines

  I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

• Cannot connect to MySQL on RDS (Amazon Web Services) from my laptop

  - by Bruno Reis

  I'm having some trouble connecting to a MySQL 5.1 server on an RDS instance on AWS from my laptop. The detailed description of the problem is here: https://forums.aws.amazon.com/thread.jspa?messageID=323397 In short: I have 2 MySQL servers, both with the same db configuration and firewall (security group) configuration. One of them works fine: I can connect to it from my EC2 instances (ie, from inside the AWS cloud) and from my laptop. The other one doesn't: I can connect from my EC2 instances but not from my laptop. The symptom: a connection attempt from my laptop just hangs, and then times out, as if there was a firewall blocking me (ie, silently dropping my SYN packets). I must say that everything has been working fine for a very long time, and this problem began suddenly, 3 days ago, without any modifications to DB parameters or the security groups. My current analysis of the situation: The firewall (ie, security group) cannot be the problem: both MySQL servers share the same firewall configuration -- I can connect to one of them but not to the other. Later on, I even added a rule to allow inbound connections from 0.0.0.0/0 (ie, I turned off the firewall), and nothing. Oh, I also created a new, fresh security group and changed this instance's SG to the new one (to which I first added my ip address, and then 0.0.0.0/0) but still nothing. The credentials cannot be the problem: I use the same from my laptop and from my EC2 instances -- and the user (which is what Amazon calls master user), in the database, has a host of '%'. MySQL is not blocking my IP due to, say, too many failed connection attemps: I've FLUSH HOSTS on the database, and also I tried to connect using many different source IP addresses, even from all around the world through a VPN proxy service. What could I be missing? I'm asking here because it's been about 36 hours since I've posted on AWS forums but got no answer at all over there... someone here might have a solution! Any input is really appreciated, I'm out of ideas. Thanks!

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

• Low-traffic WordPress website on Apache keeps crashing server

  - by OC2PS

  I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

  Read the article

• apache chokes after 300 connections

  - by john titus

  We have an apache webserver in front of Tomcat hosted on EC2, instance type is extra large with 34GB memory. Our application deals with lot of external webservices and we have a very lousy external webservice which takes almost 300 seconds to respond to requests during peak hours. During peak hours the server chokes at just about 300 httpd processes. ps -ef | grep httpd | wc -l =300 I have googled and found numerous suggestions but nothing seems to work.. following are some configuration i have done which are directly taken from online resources. I have increased the limits of max connection and max clients in both apache and tomcat. here are the configuration details: //apache <IfModule prefork.c> StartServers 100 MinSpareServers 10 MaxSpareServers 10 ServerLimit 50000 MaxClients 50000 MaxRequestsPerChild 2000 </IfModule> //tomcat <Connector port="8080" protocol="org.apache.coyote.http11.Http11NioProtocol" connectionTimeout="600000" redirectPort="8443" enableLookups="false" maxThreads="1500" compressableMimeType="text/html,text/xml,text/plain,text/css,application/x-javascript,text/vnd.wap.wml,text/vnd.wap.wmlscript,application/xhtml+xml,application/xml-dtd,application/xslt+xml" compression="on"/> //Sysctl.conf net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1 fs.file-max = 5049800 vm.min_free_kbytes = 204800 vm.page-cluster = 20 vm.swappiness = 90 net.ipv4.tcp_rfc1337=1 net.ipv4.tcp_max_orphans = 65536 net.ipv4.ip_local_port_range = 5000 65000 net.core.somaxconn = 1024 I have been trying numerous suggestions but in vain.. how to fix this? I'm sure m2xlarge server should serve more requests than 300, probably i might be going wrong with my configuration.. The server chokes only during peak hours and when there are 300 concurrent requests waiting for the [300 second delayed] webservice to respond. Please help..

  Read the article

• Apache with multiple domains, single IP, VirtualHost is catching the wrong traffic

  - by apuschak

  I have a SOAP web service I am providing on a apache web server. There are 6 different clients (IPs) that request data and 3 of them are hitting the wrong domain. I am trying to find a way to log which domain name the requests are coming from. Details: ServerA is the primary ServerB is the backup domain1.com - the domain the web service is on domain2.com - a seperate domain that server seperate content on ServerB ServerA is standalone for now with its own IP and DNS from domain1.com. This works for everyone. ServerB is a backup for the web service, but it already hosts domain2.com. I added entries into the apache configuration file like: <VirtualHost *:443> ServerName domain2.com DocumentRoot /var/www/html/ CustomLog logs/access_log_domain2443 common ErrorLog logs/ssl_error_log_domain2443 LogLevel debug SSLEngine on ... etc SSL directives ... </VirtualHost> I have these for both 80 and 443 for domain1 and domain2 with domain1 being second. The problem is when we switch DNS for domain1 from ServerA to ServerB, 3 out of the 6 clients show up in the debug logs as hitting domain2.com instead of domain1.com and fail their web service request because domain2.com is first in the apache configuration file and catching all requests that don't match other virtualhosts, namely domain1.com. I don't know if they are hitting www.domain1.com, domain1.com (although I added entries for both) or using the external IP address or something else. Is there a way to see which URL they are hitting not just the page request or someother way to see why the first domain is catching traffic meant for the second listed domain? In the meantime, I've put domain1.com higher in the apache configuration than domain2.com. Now it catches the requests for all clients and works, however I don't know what it is catching and would like to make domain2.com the first entry again with a correct entry for domain1.com, for however they are hitting it. Thank you for your help! Andrew

  Read the article

• Proxypass issue in apache

  - by user116992

  I am reverse proxying one site to another site. It's working nicely, but on some links it displays the original link. Here is my configuration Original Site "mysite.com" Second site configuration which is proxypassed on "mysite.com" <VirtualHost *:80> ServerName test.mysite.com ServerAlias www.test.mysite.com test.mysite.com ErrorLog /var/log/apache2/test.mysite_log.log TransferLog /var/log/apache2/test.mysite-access_log.log LogLevel info LogFormat "%h %l %u %t \"%r\" %>s %b %T" common ProxyPass / http://mysite.com/ ProxyPass / http://mysite.com/ ProxyPassReverse / http://mysite.com/ </VirtualHost> Now, everything is working well, but the problem is that when I go to some specific link it redirects me to original link. For Example, there are two sections on my page: "about-us" and "inquiry". When I click on "about-us" it takes me to "http://test.mysite.com/about-us" which is ok When I click on "inquiry" it takes me to "http://mysite.com/inquiry" which is not correct it must be "http://test.mysite.com/inquiry". I think I've missed some thing to add in configuration file but I can't figure it out.

  Read the article

• Linux: how to "zoom" into a screen area à la Mac OS X?

  - by puccio

  It seems to me on Mac OS X it is possible to "zoom" (like a photocamera does) into a region of the screen. It is handy for example to put at full monitor size a video which would otherwise be limited to be just into a small window (ie. embedded in a web page and not watchable standalone.), obviously losing some quality due to the "zoom". Do you know of any tool or way to do the same thing on a Linux desktop (with Gnome as desktop manager if it is desktop manager dependant). Thanks in advance for any suggestion.

  Read the article

• How to enable a CD/DVD drive? It is not listed in "My Computer"

  - by Senthil

  I just got a laptop from a friend. The CD/DVD drive is not present in "My Computer". But the tray comes out when I press the button and everything. I remember long time ago, enabling it by changing some registry value, but I forgot which one. I have administrator privileges. I can see it in the device manager. But it has a yellow exclamation icon on it. My OS: Windows XP SP3 In Device Manager, inside the properties window for this device, the following error is shown in the "Device Status" box. A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) How do I enable my CD/DVD drive?

  Read the article

• Why does my ftp(e)s server fails like half of the time

  - by user1092608

  I have this discussion at work regarding our ftp server running via vsftpd. Initially, we have opted to serve ftpes instead of sftp because this seemed the most flexible and straightforward solution for our server to have secure file transmission. Afterwards, our ftp server seems to be a source of issues for our end users. Half of the time, users complain about not working ftp connections. I must say, i tested our FTP trough different infrastructures (=in the field, at random times at random places) and indeed, sometimes behind some configurations (=no idea how they are configured, because the 'field' testing), i recieve errors. Some of the are: Error: Failed to retrieve directory listing (filezilla) Furthermore, behind my basic home configuration, everything seems to be running fine. I (think I) did all the basic configuration checks (passive mode?, firewall for all ports?, ...) and can't seem to find the source. Being a bunch of techies at our small office, yet knowing nothing about infrastructure, some start suggesting that ftps protocol could be the source of issues. ("No, i only knew sftp so far" "Ftps is not widespread"). I, however, strongly doubt this hypothesis, since reading around on the www, asking questions on serverfault, everyone seems to deny this. So, as I would like to avoid reconfiguring, since this involves messing around in our SSH service, our virtual user setup and ftp service, i would need some advice on 1) what could be potentially the general cause? 2) do you have some general tips? 3) would you mind having a look at my configuration file? ----- General Settings ----- write_enable=YES dirmessage_enable=YES nopriv_user=ftpsecure ftpd_banner="Welcome to XXXX FTP!" hide_ids=YES hide_file=.* max_per_ip=10 max_clients=10 local_enable=YES local_umask=022 chroot_local_user=YES secure_chroot_dir=/usr/share/empty userlist_enable=NO userlist_deny=YES userlist_file=/etc/vsftp_deny_users guest_enable=YES guest_username=ftpvirtual virtual_use_local_privs=YES user_sub_token=$USER local_root=/srv/ftp/ftpvirtual/$USER anonymous_enable=NO syslog_enable=NO xferlog_enable=YES xferlog_file=/var/log/vsftpd_xfer.log connect_from_port_20=YES pam_service_name=vsftpd listen=YES listen_port=21 pasv_enable=YES pasv_min_port=30000 pasv_max_port=30030 pasv_address=foo ssl_enable=YES rsa_cert_file=/etc/vsftpd.pem rsa_private_key_file=/etc/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES ssl_ciphers=HIGH anon_mkdir_write_enable=NO anon_root=/srv/ftp anon_upload_enable=NO idle_session_timeout=900 log_ftp_protocol=NO dsa_cert_file=/etc/vsftpd.pem Thanks

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• pam_ldap.so before pam_unix.so? Is it ever possible?

  - by user1075993

  we have a couple of servers with PAM+LDAP. The configuration is standard (see http://arthurdejong.org/nss-pam-ldapd/setup or http://wiki.debian.org/LDAP/PAM). For example, /etc/pam.d/common-auth contains: auth sufficient pam_unix.so nullok_secure auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth requiered pam_deny.so And, of course, it works for both ldap and local users. But every login goes first to pam_unix.so, fails, and only then tries pam_ldap.so successfully. As a result, we have a well-known failure message for every single ldap user login: pam_unix(<some_service>:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=<some_host> user=<some_user> I have up to 60000 of such log messages per day and I want to change the configuration so, that PAM will try ldap authentication first, and only if it fails - try pam_unix.so (I think it can improve the i/o performance of the server). But if I change common-auth to the following: auth sufficient pam_ldap.so use_first_pass auth sufficient pam_unix.so nullok_secure auth requiered pam_deny.so Then I simply can't login anymore with local (non-ldap) user (e.g., via ssh). Does somebody knows the right configuration? Why Debian and nss-pam-ldapd have pam_unix.so at first by default? Is there really no way to change it? Thank you in advance. P.S. I don't want to disable logs, but want to set ldap authentication on the first place.

  Read the article

• Remotely Managing Storage on Hyper-V 2012 Core

  - by Vazgen

  I have a core Hyper-V Server 2012 that I am remotely managing from a Windows 8 client. I can connect in Hyper-V Manager, Server Manager, and MMC. However, I don't understand how I can manage the physical hard drive (for ex, deleting vhdx files, creating folders, etc) from my Windows 8 client. I tried to attach the remote share as follows: q: \\MyServer\c$ It said command completed successfully, but I don't see the drive on my client's Explorer. I can get to it in cmd.exe on the client but how can I manage it in a GUI? explorer q: Throws error:

  Read the article

• if I define `my_domain`, postfix does not expand mail aliases

  - by Norky

  I have postfix v2.6.6 running on CentOS 6.3, hostname priest.ocsl.local (private, internal domain) with a number of aliases supportpeople: [email protected], [email protected], [email protected] requests: "|/opt/rt4/bin/rt-mailgate --queue 'general' --action correspond --url http://localhost/", supportpeople help: "|/opt/rt4/bin/rt-mailgate --queue 'help' --action correspond --url http://localhost/", supportpeople If I leave postfix with its default configuration, then the aliases are resolved correctly/as I expect, so that incoming mail to, say, [email protected] will be piped through the rt-mailgate mailgate command and also be delivered (via the mail server for ocsl.co.uk (a publicly resolvable domain)) to [email protected], user2, etc. The problem comes when I define mydomain = ocsl.co.uk in /etc/postfix/main.cf (with the intention that outgoing mail come from, for example, [email protected]). When I do this, postfix continues to run the piped command correctly, however it no longer expands the nested aliases as I expect: instead of trying to deliver to [email protected], user2 etc, it tries to send to [email protected], which does not exist on the upstream mail server and generates NDRs. postconf -n for the non-working configuration follows (the working configuration differs only by the "mydomain" line. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ocsl.co.uk newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 We did have things working as we expected/wanted previously on an older system running Sendmail.

  Read the article

• Trouble running multiple Firefox versions on OS X Lion

  - by politicus

  I am trying to use two versions of Firefox (11 and 13) on OS X Lion. I don't especially want to run two versions at the same time. I want to be able to run the version 11 when I choose the version 11 via the profile manager. The same for the version 13. Every time, I want to launch the version 11, the launcher launches the version 13... When I select the version 11 via the profile manager, Firefox 13 is launched. I created 2 automators apps (FF11.app and FF13.app) to launch Firefox : /Applications/Firefox11.app/Contents/MacOS/firefox-bin -no-remote -P FF11 & /dev/null & /Applications/Firefox13.app/Contents/MacOS/firefox-bin -no-remote -P FF13 & /dev/null & Any help would be greatly appreciated. Thanks in advance.

  Read the article

• Is it possible to create a Mirror or Stripe volume for the boot partition in Windows 2008/R2?

  - by Georgios

  Hello, I have a server with two identical disks and I have installed Windows Server 2008 R2 on C, which is a 60GB volume on Disk 0. Using the disk manager, I have attempted to create both a Mirror and Stripe volume in Disk 1 but every time I get the same error "No extents found in the plex". This error occurs after Windows has converted both disks to Dynamic. The fact that the manager allows me to attempt to do this would point to the fact that this is possible. However I have been unable to find any solutions to this error. Any ideas on how to solve this? Thanks Georgios

  Read the article

• Two network adapters in one WindowsXP PC, how to make them work?

  - by Deele

  I have a need to set up network so I can use two ethernet cards inside one Windows (Windows XP SP2) based PC, one for internet connection, second, for internal LAN. How should I configure each NIC, with what IP's, subnet masks and gateways, so I can use inernet on my PC and get in touch with devices on my LAN? I have found that there are some sort of re routing nessesary inside my PC, but how does it work? I have already set up some configuration already, but I can't use it together with PC #1 NIC #1 connected. I need to disconnect, to access NIC WEB interface. Current configuration: Switch #1 and PC #1 NAS #2 are gigabit one's, so I could access NAS with gigabit speed. PC #1 NIC #1 IP XX.XXX.162.106 SN 255.255.255.248 GW XX.XXX.162.105 PC #1 NIC #2 IP 10.0.0.1 SN 255.255.0.0 GW 0.0.0.0 NAS #1 NIC #1 IP 10.0.0.12 SN 255.255.0.0 GW 0.0.0.0 My question is - what exact configuration should I do for every NIC in this LAN, so it would work? Is it possible to achieve internet access for Laptop, that is inside that NIC #2 LAN (should I just set up basic ICS)?

  Read the article

• Remote HTTP to FTP

  - by jamd12

  I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

  Read the article

• what is the purpose of the files in this directory: /var/lib/apt/lists?

  - by Magpie

  linux lubuntu HD4000 intel ivy-bridge 8gb 1600 ram. I am getting a duplicate entry error message from synaptic package manager and it says the problem is there. I am wondering a few things: What this directory is. Whether it safe to simply delete the offending duplicates from there. Whether this is a useful new discovery... Is this where all the packages I have no use for end up and something I can edit to suit my fancy in the long run? It would be nice to be able to reduce the clutter in my package manager. Especially find a way to get rid of all the 32 bit stuff or older versions of programs I have downloaded manually elsewhere. I had meant to post this in linux! So if this is wrong place let me know and I will move it there!

  Read the article

• apache access and error log written in same file

  - by user196075

  i have issue that access and error log are written in same file ! , the configuration in virtualhosts.conf as the following : <VirtualHost *:80> ServerName ************ ServerAdmin support@************8 DocumentRoot /var/www/html/*********.com ErrorLog /var/log/httpd/********/********.com_error_log CustomLog /var/log/httpd/********/********.com_access_log combined <Directory /var/www/html/***********.com> Options -Indexes FollowSymLinks AllowOverride All </Directory> </VirtualHost> as you see from the configuration each access and error logs should be save separately , but both logs are written in *.com_access_log , i have double check all permission , group and owner ... can't find anything wrong previous error in log file : [Thu Sep 19 14:15:02 2013] [error] [client 192.168.10.54] client denied by server configuration: /var/www/html/**********/show_has_offers.php i have tried to generate same error , i can find the hit in access log only as the following : 192.168.10.75 - - [24/Oct/2013:08:11:14 +0000] "GET /show_has_offers.php HTTP/1.1" 404 1586 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0" 0 17332 and nothing in error log !! Please advice ...

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >