Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 246/314 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• DRBD Replication failure

  - by user62513

  A couple of weeks ago I setup a 2 nodes CRM system with one of the resources managed being MySQL over DRBD. Today for maintenance reasons I restarted both nodes but now they can't connect to each other anymore. DRBD fell out of sync and I followed this guide to get it back connected but it's only able to run successfully on one node. But this strange thing happens: If I crm node standby both nodes and I try: crm node online node0 before crm node online node1, all the CRM resources start successfully but the DRBD partitions are still running in StandAlone state. crm node online node1 beofre crm node online node0, the DRBD resource fails to start, thus causing mysql not to start. If I standby both resources and call crm node online node0 then it times out and prints this error: Running crm node online node0 produces this output after timing out Error setting standby=off (section=nodes, set=<null>): Remote node did not respond Error performing operation: Remote node did not respond Is there anything I'm doing wrong here? An alternative will be just do MySQL replication but I'm not sure how to promote a slave to master when the master database is not available.

  Read the article

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• Blocking an IP from connecting

  - by Sam W.

  I have a problem with my Apache webserver where there's and IP than connecting to my server, using alot of connection and wont die which eventually making my webserver timeout. The connection will stay as SYN_SENT state if I check using netstat -netapu I even flush my iptables and use the basic rules and it still doesn't work. The IP will get connected when I start my Apache Basic rules that I use: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -s 89.149.244.117 -j REJECT iptables -A OUTPUT -s 89.149.244.117 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT The bold part is rule in question. Not sure this is related but tcp_syncookies value is 1. Can someone point out my mistake? Is there a way to block it for good. Thank you

  Read the article

• Multiple Devices connecting to VPN on CentOS server

  - by jfreak53

  I am looking for a solution as to what would be the VPN software for multiple OSes and Devices. I currently have 15 systems to connect to a VPN. I was using Hamachi from LogMeIn but their lack of Android support really upsets me, and their limited support for Linux OSes is also a let down. 90% of my systems are Ubuntu 11+ systems, only 2 are Windows XP. But I also have a few people, maybe 3 that need to connect to it from Android devices. This is where Hamachi has let me down and I want to move to my own VPN solution. The server would be a simple VPS running CentOS. So I need some VPN software that allows connection of those to a Linux based server. I wanted to go with OpenVPN, but I am under the opinion that in any OS you have to have their software to connect to the VPN. Ubuntu supports VPN's out of the gate, but OpenVPN requires extra software to be installed, I don't want this if I can help it. Same with Windows and same with Android. Plus android mostly requires rooted devices for OpenVPN, at least from what I've read. I was looking at maybe L2TP, but I'm not sure how easy it is to get Ubu systems connected with it as I haven't found much on the subject, let alone Window's XP machines. I know Android connects out of the gate to it. I don't know much about L2TP but I know it's a pain to get running in CentOS from what I have read. Now the last option is some sort of software for PPTP but I've never read anything on it and don't know if all systems are compatible with it. What would be your solution to these devices and multiple OSes? OpenVPN seems to be my heading I just don't like it that it always requires software to run and rooted Android Devices. Any solutions for this and install solutions? Maybe a different OS for the server like Ubuntu would make another type of VPN easier?

  Read the article

• How to extend a Linux PV partition online after virtual disk growth

  - by Yves Martin

  VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

  Read the article

• Removing/modifying LDAP objectclasses/attributes using olc

  - by Foezjie

  I'm having trouble using openldap's olc to modify a schema without shutting down the server. To test some things out, I made the following schema: objectIdentifier tests orgUlyssisOID:4 objectIdentifier testAttribute tests:1 objectIdentifier testObjectClass tests:2 attributeType ( testAttribute:1 NAME 'attr1' DESC 'attribuut 1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' ) attributeType ( testAttribute:2 NAME 'attr2' DESC 'attribuut 2' SUP userPassword SINGLE-VALUE ) objectclass ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST (attr1 $ attr2 ) ) And added it to a new schema called test. (cn={9}test.ldif in cn=schema). Now I can't seem to figure out how to delete class1 from that schema. I use the following LDIF (and tried lots of variations too, to no avail) dn : cn={9}test,cn=schema,cn=config changetype: modify delete: olcObjectClasses olcObjectClasses: ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST ( attr1 $ attr2 ) ) Running ldapmodify -x -W -D cn=admin,cn=config -f test.ldif -d 0 gives no output. -d 1 gives this: ldap_create ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:389 ldap_new_socket: 4 ldap_prepare_socket: 4 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 4 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 38 bytes to sd 4 ldap_result ld 0x7f2a8ccf3430 msgid 1 wait4msg ld 0x7f2a8ccf3430 msgid 1 (infinite timeout) wait4msg continue ld 0x7f2a8ccf3430 msgid 1 all 1 ** ld 0x7f2a8ccf3430 Connections: * host: localhost port: 389 (default) refcnt: 2 status: Connected last used: Mon Sep 10 11:29:57 2012 ** ld 0x7f2a8ccf3430 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f2a8ccf3430 request count 1 (abandoned 0) ** ld 0x7f2a8ccf3430 Response Queue: Empty ld 0x7f2a8ccf3430 response count 0 ldap_chkResponseList ld 0x7f2a8ccf3430 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f2a8ccf3430 NULL ldap_int_select read1msg: ld 0x7f2a8ccf3430 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 12 contents: read1msg: ld 0x7f2a8ccf3430 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f2a8ccf3430 0 new referrals read1msg: mark request completed, ld 0x7f2a8ccf3430 msgid 1 request done: ld 0x7f2a8ccf3430 msgid 1 res_errno: 0, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 4 ldap_free_connection: actually freed So no real indication of an error. Where am I doing it wrong? Bonus question: If I have some entries of a certain objectclass, can I modify it (add/remove attributeTypes) without removing the entries? Thanks in advance for all help.

  Read the article

• cURL - Unkown SSL protocol error - OS X 10.9

  - by saq7

  I am trying to use cURL and get the following error on every https request I make. The error is always the same. HTTP requests work flawlessly. The verbose output is quite useless. Saquibs-MacBook-Pro:~ skothawala$ curl https://google.com -vv * Adding handle: conn: 0x7fe09b803a00 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fe09b803a00) send_pipe: 1, recv_pipe: 0 * About to connect() to google.com port 443 (#0) * Trying 74.125.226.129... * Connected to google.com (74.125.226.129) port 443 (#0) * Unknown SSL protocol error in connection to google.com:-9805 * Closing connection 0 curl: (35) Unknown SSL protocol error in connection to google.com:-9805 I have looked through other answers on this forum and other places on the internet, but haven't found an answer. Most people's issues involve particular servers and the configuration of SSL on these servers. Mine however is problematic anytime HTTPS is used (with any website). Can someone please suggest what I should be looking into to solve the problem? Can it be that something is not properly configured? What should I be looking for?

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• SSH connection problem - allowed from LAN but not WAN

  - by Kerem Ulutas

  I tried to setup my Arch Linux installation to be an SSH host, but here is the thing: I can ssh localhost, it fails to login via public key and asks for username and password, but still able to login. When I try ssh my_wan_ip it gives ssh_exchange_identification: Connection closed by remote host error. I've read all topics about this error and none helped me. By the way, just confirmed, it gives ssh: connect to host my_dyndns_hostname port 22: Connection refused from another machine (outside of my network, it has different wan ip). I have sshd: ALL in "hosts.allow", ALL:ALL in "hosts.deny". I am able to connect to my own pc via ssh, ping my own pc, but my ssh setup seems to be the problem, it gives that annoying error when I try to ssh from wan. /etc/ssh/ssh_config /etc/ssh/sshd_config And finally, here is the debug output for both sshd and ssh: (i ran ssh command and i took output to sshd debug after that): sshd debug ssh debug I can edit my question according to your needs. Just ask for any more information needed. BTW I have no iptables running. I have one cable dsl modem connected to a asus wl-330gE wireless access point, they both have their firewall disabled. I configured NAT so port 22 is directed to the pc I'm having this trouble. Any help appreciated, thanks..

  Read the article

• Raid-z unaccessible after putting one disk offline

  - by varesa

  I have installed FreeNAS on a test server, with 3x 1Tb drives. They are setup in raidz. I tried to offline one of the disks (from the FreeNAS web-ui), and the array became degraded, as I think it should. The problem is with the array becoming unaccessible after that. I thought a raid like that should be able to run fine with one of the disks missing. Atleast very soon after I offline'd and pulled out the disk, the iSCSI share disappeared from a ESXi host's datastores. I also ssh'd into the FreeNAS server, and tried just executing ls /mnt/raid (/mnt/raid/ being the mount point). The whole terminal froze, not accepting ^C or anything. # zpool status -v pool: raid state: DEGRADED status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run 'zpool clear'. see: http://www.sun.com/msg/ZFS-8000-HC scrub: none requested config: NAME STATE READ WRITE CKSUM raid DEGRADED 1 30 0 raidz1 DEGRADED 4 56 0 gptid/c8c9e44c-08e1-11e2-9ba6-001b212a83ea ONLINE 3 60 0 gptid/c96f32d5-08e1-11e2-9ba6-001b212a83ea ONLINE 3 63 0 gptid/ca208205-08e1-11e2-9ba6-001b212a83ea OFFLINE 0 0 0 errors: Permanent errors have been detected in the following files: /mnt/raid/ raid/iscsivol:<0x0> raid/iscsivol:<0x1> Have I understood the workings of a raidz wrong, or is there something else going on? It would not be nice to have the same thing happen on a production system...

  Read the article

• SSH attack CentOS Amazon EC2

  - by user37143

  Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

  Read the article

• Amazon EC2 instance missing Network Interface

  - by Sergiks

  I am running Linux on a t1.micro instance at Amazon EC2. Once I noticed bruteforce ssh login attemtps from a certain IP, after litle Googling I issued the two following commands (other ip): iptables -A INPUT -s 202.54.20.22 -j DROP iptables -A OUTPUT -d 202.54.20.22 -j DROP Either this, or maybe some other actions like yum upgrade perhaps, caused the follwing fiasco: after rebooting the server, it came up without the Network Interface! I only can connect to it through AWS Management Console JAVA ssh client - via local 10.x.x.x address. Console's Attach Network Interface as well as Detach.. are greyed out for this instance. Network Interfaces item at the left does not offer any Subnets to choose from, to create a new N.I. Please advice, how can I recreate a Network Interface for the instance? Upd. The instance is not accessible from outside: cannot be pinged, SSH'ed or connected by HTTP on port 80. Here's the ifconfig output: eth0 Link encap:Ethernet HWaddr 12:31:39:0A:5E:06 inet addr:10.211.93.240 Bcast:10.211.93.255 Mask:255.255.255.0 inet6 addr: fe80::1031:39ff:fe0a:5e06/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1426 errors:0 dropped:0 overruns:0 frame:0 TX packets:1371 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:152085 (148.5 KiB) TX bytes:208852 (203.9 KiB) Interrupt:25 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) What is also unusual: a new micro instance I created from scratch, with no relation to the troubled one, was not pingable too.

  Read the article

• MySQL extension of PHP not working

  - by Víctor

  In a Debian server, and after intallation and removal of SquirrelMail (with some downgrade and upgrade of php5, mysql...) the MySQL extension of PHP has stopped working. I have php5-mysql installed, and when I try to connect to a database through php-cli, i connect successfully, but when I try to connect from a web served by Apache I cannot connect. This script, run by php5-cli: echo phpinfo(); $link = mysql_connect('localhost', 'user, 'password'); if (!$link) { die('Could not connect: ' . mysql_error()); } echo 'Connected successfully'; mysql_close($link); Prints the phpinfo, which includes "/etc/php5/cli/conf.d/mysql.ini", and also the MySQL section with all the configuration: SOCKET, LIBS... And then it prints "Connectes successfully". But when run by apache accessed by web browser, it displays the phpinfo, which includes "/etc/php5/apache2/conf.d/mysql.ini", but has the MySQL section missing, and the script dies printing "Fatal error: Call to undefined function mysql_connect()". Note that both "/etc/php5/cli/conf.d/mysql.ini" and "/etc/php5/apache2/conf.d/mysql.ini" are in fact the same configuration, because I have in debian the structure: /etc/php5/apache2 /etc/php5/cgi /etc/php5/cli /etc/php5/conf.d And both point at the same directory: /etc/php5/apache2/conf.d -> ../conf.d /etc/php5/cli -> ../conf.d Where /etc/php5/conf.d/mysql.ini consists of one line: extension=mysql.so So my question is: why is the MySQL extension for PHP not working if I have the configuration included just in the same way as in php-cli, which is working? Thanks a lot!

  Read the article

• Online computer not responding to pings

  - by mastercork889

  I was doing a bit of scanning on my network lately, knew all the hostnames to each computer connected. But whilst pinging one of them ping returned Request timed out.. This is strange as I know the computer is online and that the computer responds correctly to pinging on a different (enterprise) network. Is there something on the computer, my network, or my computer that is bugging with this? - That's just a sub-question, I don't expect this to be the main answer. The real question: Why does this happen? Why does pinging the IP4 address not work? EDIT : Pinging the Hostname used to default to the IP4 address, but now it defaults to the IP6 address. Why does this happen? But now that it pings using IP6, how come it all of a sudden works? > ping -6 THE_COMPUTER Pinging THE_COMPUTER [lengthy IP6 address] with 32 bytes of data: Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Ping stats: Sent = 4, Recieved = 4, Lost = 0 (0% loss) But when this is done using IP4 it doesn't work. So there are now two questions: How come IP6 works and not IP4? Why does IP4 not work?

  Read the article

• What is the best way to recover from a mysql replication fail?

  - by Itai Ganot

  Today, the replication between our master mysql db server and the two replication servers dropped. I have a procedure here which was written a long time ago and i'm not sure it's the fastest method to recover for this issue. I'd like to share with you the procedure and I'd appreciate if you could give your thoughts about it and maybe even tell me how it can be done quicker. At the master: RESET MASTER; FLUSH TABLES WITH READ LOCK; SHOW MASTER STATUS; And copy the values of the result of the last command somewhere. Wihtout closing the connection to the client (because it would release the read lock) issue the command to get a dump of the master: mysqldump mysq Now you can release the lock, even if the dump hasn't end. To do it perform the following command in the mysql client: UNLOCK TABLES; Now copy the dump file to the slave using scp or your preferred tool. At the slave: Open a connection to mysql and type: STOP SLAVE; Load master's data dump with this console command: mysql -uroot -p < mysqldump.sql Sync slave and master logs: RESET SLAVE; CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; Where the values of the above fields are the ones you copied before. Finally type START SLAVE; And to check that everything is working again, if you type SHOW SLAVE STATUS; you should see: Slave_IO_Running: Yes Slave_SQL_Running: Yes That's it! At the moment i'm in the stage of copying the db from the master to the other two replication servers and it takes more than 6 hours to that point, isn't it too slow? The servers are connected through a 1gb switch.

  Read the article

• why i cannot download jdk from oracle web site directly without AuthParam?

  - by hugemeow

  that is download with the following command, why it fails to download that file? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin the following command works, but that AuthParam may not work after a while, why? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 how this AuthParam option is implemented? why i cannot download without this parameter? and why i can only get this parameter using explorer? is rewrite used in the oracle server when deal with wget request? why the same command not works after an hour, does the value of AuthParam expired? so how the server check whether the value of AuthParam is expired? wget http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 --2012-09-07 03:51:01-- http://download.oracle.com/otn-pub/java/jdk/6u35-b10/jdk-6u35-linux-i586.bin?AuthParam=1346955572_27e44512fe8ef5cb920c4c329e5f0fd8 Resolving download.oracle.com... 23.67.251.50, 23.67.251.57 Connecting to download.oracle.com|23.67.251.50|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-09-07 03:51:01 ERROR 403: Forbidden. @KJ-SRS is that kind of CGI program which is used to judge if AuthParam is right? is that possible to download jdk package purely using wget command, and no need to get that AuthParam in explorer

  Read the article

• Remote Desktop Connection issues

  - by stead1984

  I have a server at a remote site, the sites are connected to each other a site-to-site VPN connection using Cisco ASA 5510 firewalls. One end is managed by me, the other managed by the remote location's IT, between the 2 of us is another party who manage and route the connections. Remote desktop has been working fine with no problems then recently I noticed it was working for ONE server over the VPN which it previously had done. All the routes seem fine and I can still ping the remote server and even download files from an FTP site on the remote server.... so the VPN seems fine. Remote Desktop works fine to the remote server within the remote location but not over the VPN. I don't understand why it's stopped working, I originally thought it was a rule in place by the other party but they stress it's not them. The only thing that has changed on the server initiating the RDP connection is that it now runs file services sharing a folder. The source server (remote location) may or may not have had updates applied. Any idea's?

  Read the article

• Which events specifically cause Windows 2008 to mark a SAN volume offline?

  - by Jeremy

  I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

  Read the article

• How to configure CISCO switch 2960 for port-based address allocation on a single port only?

  - by Jack

  CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• smartctl short test doesn't seem to complete

  - by Cédric COPY

  I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >