Search Results

Search found 8888 results on 356 pages for 'disk'.

Page 246/356 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Qnap won't connect to Windows Share

  - by thetrashcan

  I have a qnap nmp-1000 in my network and would like to stream my films from my win7 laptop to the nmap-1000 device. I just managed to do so with upnp sharing, but I would like to, for security reasons, share my files over a shared folder which is password protected. My problem is when I'm searching for devices on my network with the qnap then it won't find any. When I try to mount a remote disk on my qnap it will just fail with an connection failed message. But when I try to connect to the qnap device with my laptop, it does this succesfully. Can someone guide me through on how to get my setup working?

  Read the article

• What causes Windows Boot to stall?

  - by Nick Berardi

  For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

  Read the article

• Easiest way to move my Windows installation to an SSD?

  - by Jon Artus

  I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

  Read the article

• remove disks or other media press any key to restart

  - by Sam I am

  I'm having an issue regarding a disk imaging process. I have a WinPE image that will re-partition, the hard drive, and put a boot-able image on it. When I run the imaging process from an initial state, I get the following error remove disks or other media press any key to restart If I run the process subsequent times, It will work as desired, but I'm still interested in getting the process to work the first time. How do I figure out what's going on here? what should I be looking at? I'm a little bit out of my depth here, I don't know what to do next

  Read the article

• DVD ROM not working only in windows?

  - by Behrooz A

  I have an Asus N53SV laptop, My DVD rom doesn't read any type of DVD in windows , but I just installed windows 7 from a bootable DVD , I think this problem occurred after I tried to change my partitioning with paragon partition magic , I was trying to shrink , join and so , after that my windows showed an error that windows cannot find [weird address] on hard disk every time on starts. windows itself says the DVD drive works correctly and driver is working properly, but no DVD or CD can be read , note that the DVD I'm trying to read is the same DVD which I used to install windows some minutes ago. I don't know what's the problem

  Read the article

• GNOME/KDE Linux entirely in RAM?

  - by František Žiacik

  Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• Why do I have only incoming traffic when copying from network source to network destination?

  - by mxp

  I have a VirtualBox VM that is located on a network share of my NAS. When I copy something from the VM's disk onto another of the NAS' network shares (so the data is visible outside the VM), the Windows 7 Task Manager shows only incoming network traffic (yellow graph). It's as if the data was only received but never sent over the network. I verified that the data arrives on the other network share. As I understand it, the data flow looks like this: +-NAS--------+ +-Win7 PC (VM Host)-+ | Share1(VM)-|>---->|-+ | | | | | | | Share2 <---|<----<|-+ | +------------+ +-------------------+ If it was like this, I would see incoming and outgoing traffic, right? What am I not getting here?

  Read the article

• win2008 R2 server core software RAID

  - by shimonyk

  I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

  Read the article

• ubuntu fails to start

  - by miccaman

  I have a laptop with ubuntu 9.10 which fails to start, and I want to copy the data from it to an external hard disk. I can login in recovery mode command line, but then I cannot mount the external hard drive. (in recovery mode I cannot write to the laptops hard drive) If I boot from an portable USB with mintlinux, I can mount the external harddrive, and copy most of the data from the laptop, however there is a dir which I have no rights to access under /home/user/Documents then I get a permission denied error. Are there any other options?

  Read the article

• auspex LFS backups

  - by user1250465

  I have some backup tapes which existed on an AUSPEX file server. The backups were written to tape with the SunOs version of the CPIO command. Now that I need to restore them, (of course there are no more auspex servers in existance), the backups won't restore because the headers are not standard. I have dumped the tape images to disk. PAX, CPIO, and TAR cannot read the images. I've tried all of the CPIO format options. The errors I get are "name too long", "byte swapped in header", or just junk output. I can open up the images and read the contents of the files, but cannot restore the images. I have found that SunOs had a special header in CPIO V2.5 images. I have found the source for cpio, now I need definition of the SunOs header inside CPIO?

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• Repair Lacie 2Big Network 2

  - by Donier

  hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

  Read the article

• Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

  - by JDS

  I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

  Read the article

• How can I create a pen drive that I can boot from, and then install Win98 from?

  - by rossmcm

  I have a HP Compaq t5515 thin client computer with a flash disk and USB port. I want to put Win98 onto it, replacing whatever is on there now (I think it is some Linux-based thing). I can find stuff about putting Win98 onto a pen drive and running from that, but I can't find any info about installing Windows 98 from a pen drive onto a sep[arate system. Is it just a matter of making the pen drive bootable to DOS copying the contents of a Win98 installation CD onto the pen drive booting the HP machine from the pen drive running SETUP.EXE from the pen drive? Any pointers appreciated. TIA

  Read the article

• Ubuntu dual boot and grub error 18

  - by srboisvert

  I've attempted to install 9.04 on an older toshiba laptop with a new 300GB drive and am getting the dreaded Grub error 18 that indicates that grub is looking beyond the bios readable area of the HD and failing. I just let ubuntu roll with its default selections when installing and ended up with this: Drive layout /dev/sda1 -ntfs 128GB -boot /dev/sda2 -extended 170GB -lba /dev/sda5 -ntfs 167.59GB /dev/sda6 -ext3 2.33GB /dev/sda7 -linux-swap 172MB I'd like make the system dual bootable without having to reinstall windows (real pain since I would have to go through an obstructionist IT dept). I know I can make windows bootable with a rescue disk and fixmbr but is there something I can do to make it dual bootable using the ubuntu livecd? Alternately, what should I have done at the partition stage of ubuntu installation to avoid this?

  Read the article

• 32 vs 64-bit software for same machine?

  - by GorillaSandwich

  What is the difference between 32 and 64-bit software? My understanding is that 64-bit can use more RAM, if it's available, because it has a larger address space for it. Is this correct? And, specifically: If I have a 64-bit operating system with lots of RAM, and I install, say, the 32-bit version of MySQL instead of the 64-bit version, will it be unable to use all the available RAM and therefore run slower than the 64-bit version might on the same machine (assuming RAM becomes the bottleneck before processing speed or disk access speed or whatever)? If I have a 32-bit operating system and I install a 64-bit piece of software on it, will it (probably) fail to run?

  Read the article

• mount fstab partition with public access

  - by Mikhail

  How do I specify that an fstab mount-point should be public? I want /mnt/windows to be accessible to normal users. I believe I am using ntfs-3g. If I set the /mnt/windows to 777 will it be publicly accessible without changing the permissions on the NTFS disk? /dev/sdb4 /mnt/windows ntfs noatime 0 1 /dev/sdb5 / ext4 noatime 0 1 UUID=5AA4-168D /boot/efi vfat defaults 0 1 and localhost my_computer # stat /mnt/windows/ File: '/mnt/windows/' Size: 12288 Blocks: 24 IO Block: 512 directory Device: 814h/2068d Inode: 5 Links: 1 Access: (0700/drwx------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-08-21 18:29:13.597722200 -0500 Modify: 2014-08-21 18:29:13.597722200 -0500 Change: 2014-08-21 18:29:13.597722200 -0500 Birth: -

  Read the article

• Outlook 2010: using signatures stored on network

  - by Gregory MOUSSAT

  With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login. Question: How to set Outlook 2010 to use signatures outside of the default signature folder ?

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• mounting vsphere 4.0 file system in ubuntu linux

  - by sravan

  hi all, I am using VSpere 4.0 for my project work. I needed 4-5 servers my project work which is based on Database. I felt the virtualisation is very good to get the 5 servers running good at the same time. It was running good until few days back. Yesterday, it suddenly crashed and i had no idea of the reason.Today, it did not even boot up. Now, i need to take the data backup from that system. In order to do the same, i got the hard drive from the machine and tried to mount it on local linux machine.But, i was not successful. The disk was not even recognized by the linux machine. Can some one please tell me how to mount it and get the required data? Thank you all

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Windows 8 Unable to perform hibernate

  - by Jones

  Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

  Read the article

• Do I need to retain Sharepoint usage analysis log files

  - by dunxd

  Our Sharepoint installation currently has 30Gb of Usage Analysis Log file - these date back about six months. I have configured Sharepoint to do Usage Analysis Processing every night, so I am wondering whether I need to keep these files for so long. Sharepoint doesn't seem to clean up these files automatically - I think six months ago I had to clear out logs due to disk space issues. So my question is, do I need to retain these files in order to get decent usage analysis reports, or can I delete them as soon as the usage analysis processing has completed?

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >