Search Results

Search found 28744 results on 1150 pages for 'higher order functions'.

Page 246/1150 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Ubuntu on AMD based Sony Vaio VPCY B15AG

  - by Gaurav

  Last week I bought a AMD E350 (AMD Fusion platform) based Sony VAIO (VPCYB15AG) having AMD Radeon HD 6310 graphics, I removed Windows that came along with and installed Ubuntu 10.10 (AMD64) using USB drive. During installation my touchpad was not working, I managed through keyboard, but after completing installation & restarting the machine still there was no touchpad support. Also there's no proper graphic card drivers. Even I tried connecting the USB mouse to it but the left key is not working and had to configure the mouse as left-hand to get the left click enabled. I tried searching for any possible solutions for these but found nothing helpful, is there any hope? What should I do to enable i) enable touch pad support ii) get higher resolution 1366x768, etc?

  Read the article

• Does relying on intellisense and documentation a lot while coding makes you a bad programmer? [duplicate]

  - by sharp12345

  This question already has an answer here: Forgetting basic language functions due to use of IDE, over reliance? [duplicate] 4 answers Is a programmer required to learn and memorize all syntax, or is it ok to keep handy some documentation? Would it affect the way that managers look at coders? What are the downside of depending on intellisense and auto-complete technologies and pdf documentation?

  Read the article

• XAMPP pointing a file outside root folder

  - by Ravi

  I am using XAMPP for first time in Mac. Running out problems accessing other than root folder(htdocs).when I am placing my web application inside htdocs with default httpd.conf file it works when I try to point my web application url in httpd.conf it throws error I am aware that to modify the root folder I need to do changes to my XAMPP/etc/httpd.conf file With Default XAMPP MAC Settings, I am trying to change Server root,Document root and Directory in XAMPP/etc/httpd.conf file the following ServerRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" DocumentRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all </Directory> <Directory "/Users/ravi/Documents/Development/Backbone/backboneboilerplate"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> its throwing error when trying to start XAMPP httpd: Syntax error on line 54 of /Applications/XAMPP/xamppfiles/etc/httpd.conf: Cannot load /Users/ravi/Documents/Development/Backbone/backboneboilerplate/modules/mod_authn_file.so into server: cannot create object file image or add library

  Read the article

• Fan running constantly on a Dell D420 laptop

  - by Halik

  I'm running latest Ubuntu 12.04 beta on a Dell D420 laptop. The fan is spinning almost constantly - even after turning the PC off, letting it cool down, and then turning it back on, the fan will turn on after some idle time. Not to mention any CPU work. The CPU temps are normal, in range of 50-55 idle, and up to 70 with some load. It wouldn't be an issue, but the same PC running Fedora, or Arch Linux, had a much more modest fan profile - the temps were managed while you seldom heard the fan. To counter the problem, I currently use i8k tools, set manual temperature thresholds which seemed to have worked, but the i8kmon has a tendency to cycle the fan between lower and higher state within aboutin a second intervals - which is extremely annoying. As far as I can tell I did not run any special software (beside laptop-mode-tools), or any additional kernel modules when running Arch Linux and I can't tell about Fedora.

  Read the article

• Remote Data connection in iphone app

  - by Tariq- iPHONE Programmer

  Hello, i am working with Social Networking iphone app which require remote data connection. So i hired a php developer in order to provide me RESTful services. But when i start working with him, he arguing me that he will not make stored procedures and web services. Instead of he suggested me to pass query as a parameter. Suppose If I have to call Search service, he told me to send POST request with 3 parameters: Query="select * from users", username=abd and password = 123 And i thing there is no such architecture in order to use remote data. Then he is saying it is possible through socket programming. And I am 100% sure this is not an appropriate way to access remote data. This is simply illogical. Thousands of iphone application using REST/SOAP services to make remote data connection He just declined me to provide RESTful services. Please its my heartily advice to all developers that post your own views over here. So that I can show to that developers that these are the views from all developers worldwide.

  Read the article

• How can I adjust system volume from within XBMC?

  - by d3vid

  While running XBMC, I can adjust the volume of the XBMC application itself. However, this volume is limited by the current system volume. For example, if the system volume is at 80% and XBMC is at 100%, I am effectively at 80% and cannot go higher. Or if the sound is too soft and needs a boost, I would normally increase the system volume beyond 100%. XBMC takes over the whole screen, so the system volume is not accessible. Pressing the Super key brings up the dash and top menu, but clicking on it is difficult and inconsistent, and very quickly XBMC takes over the screen again. How can I adjust the system volume without having to quit XBMC?

  Read the article

• One-way forest trust between geographically distributed forests using Server 2008 R2

  - by bwerks

  Hi all, I'm planning out a joinder between two domains, as would take place with contracting companies. Forests A and B exist in distant sites, and there is to be a one-way forest trust so that domain users in Forest A can be authenticated on machines in Forest B. In order to facilitate this, each forest's domain controller must be able to contact each other in order to set up & confirm the trust, but my question is what underlying networking magic must take place beneath it. So far the prevailing approach has been to maintain a VPN connection between the two sites, but the technet documentation seems to indicate that DNS forwarding may be the way to go. Is this the case? Furthermore, if DNS will suffice, does that mean that there must be a server running DNS on boundary servers in each domain so that they can be reached from across the internet? How must they be configured? Thanks!

  Read the article

• Glade: How can I set the value of a spin button?

  - by espectalll123

  I've done some spin buttons with Glade for my Python/GTK3 app, but I don't know how to set things like default, lower or higher value. How can I do it? Using the following things for development: Python 2.7.3 GTK 3 Glade 3.12.1 1) I need to change things from script, as I need to set default value and maximum value as a variable; 2) I saw the PyGTK documentation before, it's not working for GTK3; 3) please don't direct me to the GTK3 docummentation... I can't understand it :P

  Read the article

• SQL Query for Determining SharePoint ACL Sizes

  - by Damon Armstrong

  When a SharePoint Access Control List (ACL) size exceeds more than 64kb for a particular URL, the contents under that URL become unsearchable due to limitations in the SharePoint search engine.  The error most often seen is The Parameter is Incorrect which really helps to pinpoint the problem (its difficult to convey extreme sarcasm here, please note that it is intended).  Exceeding this limit is not unheard of – it can happen when users brute force security into working by continually overriding inherited permissions and assigning user-level access to securable objects. Once you have this issue, determining where you need to focus to fix the problem can be difficult.  Fortunately, there is a query that you can run on a content database that can help identify the issue: SELECT [SiteId],      MIN([ScopeUrl]) AS URL,      SUM(DATALENGTH([Acl]))/1024 as AclSizeKB,      COUNT(*) AS AclEntries FROM [Perms] (NOLOCK) GROUP BY siteid ORDER BY AclSizeKB DESC This query results in a list of ACL sizes and entry counts on a site-by-site basis.  You can also remove grouping to see a more granular breakdown: SELECT [ScopeUrl] AS URL,       SUM(DATALENGTH([Acl]))/1024 as AclSizeKB,      COUNT(*) AS AclEntries FROM [Perms] (NOLOCK) GROUP BY ScopeUrl ORDER BY AclSizeKB DESC

  Read the article

• Are there any non-self-taught famous programmers? [closed]

  - by Jon Purdy

  It seems to me that being a self-taught programmer has significant advantages over picking it up only in higher education. Not only does a self-taught developer have a headstart on their 10 000-odd hours of mastery, but their hobby demonstrates genuine interest. This will likely lead to a process of continuous self-improvement over their career, not to mention increased likelihood of producing personal projects that are worthy of fame. A programmer who spends four years in study (not nearly all of which is going to be directly concerned with programming) has far less leisure to explore and learn independently than does a developer who starts college with even a few years of dedicated hobbyist study. I wonder whether there are any famed developers who had no exposure to programming before deciding to study it in university. I simply doubt that an 18-year-old has the capacity to become a brilliant programmer with no prior experience, but that seems like an awfully elitist and unpleasant view, so I'd like to be proven wrong.

  Read the article

• configure cisco catalyst 3560g with an egress uplink

  - by imaginative

  Currently my setup has our egress uplink connected directly to an external interface on a linux router/firewall/nat gateway. Since the linux box is a single point of failure, I've since setup two openbsd boxes using carp+pf+pfsync in order to gain some additional redundancy. the problem is, I only have one egress uplink (it's still a single point of failure) but need to get it to speak to the active carp node in my openbsd cluster which will server as my new router/firewall/nat cluster. Is there anything specific I need to do on a 3560G in order for me to be able to: 1) Drop the egress uplink into a port 2) Drop one link from the switch to a firewall 2) Drop a second link from a switch to the firewall This is so if one box dies, the other still has the egress link to the switch. Is putting them into one VLAN enough? Anything else that needs to go into the configuration for this setup to work?

  Read the article

• Minimum Baseline for Extended Support are you Ready ?

  - by gadi.chen

  As you all know the Premier support for 11i was ended last year. The extended support is available, but to use it you are advised to be at a minimum patch level as describe in note: 883202.1. So how you can know if you are in the minimum patch level? So, there are few ways. Patch wizard. Contact Oracle Support. Upload me Patch wizard Easy to use, very intuitive, required installing patch 9803629. Check MOS note: 1178133.1 Oracle Support You can log an SR thru My Oracle Support a.k.a MOS. Upload me In this option you will need to run simple sql statement (attached below or you can download it from here patchinfo.sql ) via sql*plus and upload/mail me the output and I will mail you back as soon as I can a detailed report of the required patches to be installed in order to be supported. Gadi Chen Oracle Core Technology Consultant [email protected] -------------------------------- Start from Here --------------------------------- set pagesize 0 echo off feedback off trimspool on timing off col prod format a8 col patchset format a15 spool patchinfo.txt select instance_name, version from v$instance; select bug_number from ad_bugs; prompt EOS select decode(nvl(a.APPLICATION_short_name,'Not Found'), 'SQLAP','AP','SQLGL','GL','OFA','FA', 'Not Found','id '||to_char(fpi.application_id), a.APPLICATION_short_name) prod, fpi.status, nvl(fpi.patch_level,'Unknown') patchset from fnd_application a, fnd_product_installations fpi where fpi.application_id = a.application_id(+) and fpi.status != 'N' and fpi.patch_level is not null order by 2,1; spool off; exit

  Read the article

• Libvirt-php Creating Domain

  - by Alee

  Could you tell me how to create a new domain? From PHP API Reference guide: http://libvirt.org/php/api-reference.html I have seen these functions: (i) libvirt_image_create($conn, $name, $size, $format) (ii) libvirt_domain_new($conn, $name, $arch, $memMB, $maxmemMB, $vcpus, $iso_image, $disks, $networks, $flags) (iii) libvirt_domain_create($res) (iv) libvirt_domain_create_xml($conn, $xml) The problem I am facing is that i dont know the steps to create a new domain. Either I have to create a new image first using libvirt_image_create .... or something else.

  Read the article

• Partner Blog: aurionPro SENA - Mobile Application Convenience, Flexibility & Innovation Delivered

  - by Darin Pendergraft

  About the Writer: Des Powley is Director of Product Management for aurionPro SENA inc. the leading global Oracle Identity and Access Management specialist delivery and product development partner. In October 2012 aurionPro SENA announced the release of the Mobile IDM application that delivers key Identity Management functions from any mobile device. The move towards an always on, globally interconnected world is shifting Business and Consumers alike away from traditional PC based Enterprise application access and more and more towards an ‘any device, same experience’ world. It is estimated that within five years in many developing regions of the world the PC will be obsolete, replaced entirely by cheaper mobile and tablet devices. This will give a vast amount of new entrants to the Internet their first experience of the online world, and it will only be via these newer, mobile access channels. Designed to address this shift in working and social environments and released in October of 2012 the aurionPro SENA Mobile IDM application directly addresses this emerging market and requirement by enhancing administrators, consumers and managers Identity Management (IDM) experience by delivering a mobile application that provides rapid access to frequently used IDM services from any Mobile device. Built on the aurionPro SENA Identity Service platform the mobile application uses Oracle’s Cloud, Mobile and Social capabilities and Oracle’s Identity Governance Suite for it’s core functions. The application has been developed using standards based API’s to ensure seamless integration with a client’s on premise IDM implementation or equally seamlessly with the aurionPro SENA Hosted Identity Service. The solution delivers multi platform support including iOS, Android and Blackberry and provides many key features including: • Providing easy to access view all of a users own access privileges • The ability for Managers to approve and track requests • Simply raising requests for new applications, roles and entitlements through the service catalogue This application has been designed and built with convenience and security in mind. We protect access to critical applications by enforcing PIN based authentication whilst also providing the user with mobile single sign on capability. This is just one of the many highly innovative products and services that aurionPro SENA is developing for our clients as we continually strive to enhance the value of their investment in Oracle’s class leading 11G R2 Identity and Access Management suite. The Mobile IDM application is a key component of our Identity Services Suite that also includes Managed, Hosted and Cloud Identity Services. The Identity Services Suite has been designed and built specifically to break the barriers to delivering Enterprise, Mobile and Social Identity Management services from the Cloud. aurionPro SENA - Building next generation Identity Services for modern enterprises. To view the app please visit http://youtu.be/btNgGtKxovc For more information please contact [email protected]

  Read the article

• Beginner's guide to writing comments?

  - by Cameron

  Is there a definitive guide to writing code comments, aimed at budding developers? Ideally, it would cover when comments should (and should not) be used, and what comments should contain. This answer: Do not comment WHAT you are doing, but WHY you are doing it. The WHAT is taken care of by clean, readable and simple code with proper choice of variable names to support it. Comments show a higher level structure to the code that can't be (or is hard to) show by the code itself. comes close, but it's a little concise for inexperienced programmers (an expansion on that with several examples and corner cases would be excellent, I think).

  Read the article

• Proxy / Squid 2.7 / Debian Wheezy 6.7 / lots of TCP Timed-out

  - by Maroon Ibrahim

  i'm facing a lot of TCP timed-out on a busy cache server and here below my sysctl.conf configuration as well as an output of "netstat -st" Kernel 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3 x86_64 GNU/Linux Any advice or help would be highly appreciated #################### Sysctl.conf cat /etc/sysctl.conf net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_tw_recycle = 1 fs.file-max = 65536 net.ipv4.tcp_low_latency = 1 net.core.wmem_max = 8388608 net.core.rmem_max = 8388608 net.ipv4.ip_local_port_range = 1024 65000 fs.aio-max-nr = 131072 net.ipv4.tcp_fin_timeout = 10 net.ipv4.tcp_keepalive_time = 60 net.ipv4.tcp_keepalive_intvl = 10 net.ipv4.tcp_keepalive_probes = 3 kernel.threads-max = 131072 kernel.msgmax = 32768 kernel.msgmni = 64 kernel.msgmnb = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 net.ipv4.ip_forward = 1 net.ipv4.tcp_timestamps = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_sack = 0 net.ipv4.tcp_syncookies = 1 net.ipv4.ip_dynaddr = 1 vm.swappiness = 0 vm.drop_caches = 3 net.ipv4.tcp_moderate_rcvbuf = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_ecn = 0 net.ipv4.tcp_max_orphans = 131072 net.ipv4.tcp_orphan_retries = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.tcp_max_syn_backlog = 32768 net.core.netdev_max_backlog = 131072 net.ipv4.tcp_mem = 6085248 16227328 67108864 net.ipv4.tcp_wmem = 4096 131072 33554432 net.ipv4.tcp_rmem = 4096 174760 33554432 net.core.rmem_default = 33554432 net.core.rmem_max = 33554432 net.core.wmem_default = 33554432 net.core.wmem_max = 33554432 net.core.somaxconn = 10000 # ################ Netstat results /# netstat -st IcmpMsg: InType0: 2 InType3: 233754 InType8: 56251 InType11: 23192 OutType0: 56251 OutType3: 437 OutType8: 4 Tcp: 20680741 active connections openings 63642431 passive connection openings 1126690 failed connection attempts 2093143 connection resets received 13059 connections established 2649651696 segments received 2195445642 segments send out 183401499 segments retransmited 38299 bad segments received. 14648899 resets sent UdpLite: TcpExt: 507 SYN cookies sent 178 SYN cookies received 1376771 invalid SYN cookies received 1014577 resets received for embryonic SYN_RECV sockets 4530970 packets pruned from receive queue because of socket buffer overrun 7233 packets pruned from receive queue 688 packets dropped from out-of-order queue because of socket buffer overrun 12445 ICMP packets dropped because they were out-of-window 446 ICMP packets dropped because socket was locked 33812202 TCP sockets finished time wait in fast timer 622 TCP sockets finished time wait in slow timer 573656 packets rejects in established connections because of timestamp 133357718 delayed acks sent 23593 delayed acks further delayed because of locked socket Quick ack mode was activated 21288857 times 839 times the listen queue of a socket overflowed 839 SYNs to LISTEN sockets dropped 41 packets directly queued to recvmsg prequeue. 79166 bytes directly in process context from backlog 24 bytes directly received in process context from prequeue 2713742130 packet headers predicted 84 packets header predicted and directly queued to user 1925423249 acknowledgments not containing data payload received 877898013 predicted acknowledgments 16449673 times recovered from packet loss due to fast retransmit 17687820 times recovered from packet loss by selective acknowledgements 5047 bad SACK blocks received Detected reordering 11 times using FACK Detected reordering 1778091 times using SACK Detected reordering 97955 times using reno fast retransmit Detected reordering 280414 times using time stamp 839369 congestion windows fully recovered without slow start 4173098 congestion windows partially recovered using Hoe heuristic 305254 congestion windows recovered without slow start by DSACK 933682 congestion windows recovered without slow start after partial ack 77828 TCP data loss events TCPLostRetransmit: 5066 2618430 timeouts after reno fast retransmit 2927294 timeouts after SACK recovery 3059394 timeouts in loss state 75953830 fast retransmits 11929429 forward retransmits 51963833 retransmits in slow start 19418337 other TCP timeouts 2330398 classic Reno fast retransmits failed 2177787 SACK retransmits failed 742371590 packets collapsed in receive queue due to low socket buffer 13595689 DSACKs sent for old packets 50523 DSACKs sent for out of order packets 4658236 DSACKs received 175441 DSACKs for out of order packets received 880664 connections reset due to unexpected data 346356 connections reset due to early user close 2364841 connections aborted due to timeout TCPSACKDiscard: 1590 TCPDSACKIgnoredOld: 241849 TCPDSACKIgnoredNoUndo: 1636687 TCPSpuriousRTOs: 766073 TCPSackShifted: 74562088 TCPSackMerged: 169015212 TCPSackShiftFallback: 78391303 TCPBacklogDrop: 29 TCPReqQFullDoCookies: 507 TCPChallengeACK: 424921 TCPSYNChallenge: 170388 IpExt: InBcastPkts: 351510 InOctets: -609466797 OutOctets: -1057794685 InBcastOctets: 75631402 #

  Read the article

• Unmounting a zfs pool while it is shared with sharenfs

  - by Ted W.

  I have a Solaris (open indiana) system which is getting poor disk write performance. In order to enable ZIL in this version of zfs I need to add a line to /etc/system. This will not take affect until I've unmounted and remounted the zpool. The trick is that this spool is shared via nfs to about 200 other servers to host users' home directories. I can guarantee that no users will be accessing the disks during this period of maintenance but I would like to avoid having to issue an unmount for 200 systems in order to unmount the disk on the Solaris box. My question is, with sharenfs, is it necessary to have all systems disconnected before unmounting the filesystem on the host? If it's possible, how do you go about it? I've tried unmounting already, the normal way, and it reports the disk is busy. There is no lsof in Solaris and pfiles (I think that's what it was) does not show anything obviously using the mounts.

  Read the article

• State of the art Culling and Batching techniques in rendering

  - by Kristian Skarseth

  I'm currently working with upgrading and restructuring an OpenGL render engine. The engine is used for visualising large scenes of architectural data (buildings with interior), and the amount of objects can become rather large. As is the case with any building, there is a lot of occluded objects within walls, and you naturally only see the objects that are in the same room as you, or the exterior if you are on the outside. This leaves a large number of objects that should be occluded through occlusion culling and frustum culling. At the same time there is a lot of repetative geometry that can be batched in renderbatches, and also a lot of objects that can be rendered with instanced rendering. The way I see it, it can be difficult to combine renderbatching and culling in an optimal fashion. If you batch too many objects in the same VBO it's difficult to cull the objects on the CPU in order to skip rendering that batch. At the same time if you skip the culling on the cpu, a lot of objects will be processed by the GPU while they are not visible. If you skip batching copletely in order to more easily cull on the CPU, there will be an unwanted high amount of render calls. I have done some research into existing techniques and theories as to how these problems are solved in modern graphics, but I have not been able to find any concrete solution. An idea a colleague and me came up with was restricting batches to objects relatively close to eachother e.g all chairs in a room or within a radius of n meeters. This could be simplified and optimized through use of oct-trees. Does anyone have any pointers to techniques used for scene managment, culling, batching etc in state of the art modern graphics engines?

  Read the article

• Setting up CLASSPATH and ant in Ubuntu

  - by Dzung Nguyen

  I just started to learn Java using Thinking in Java book, and have some troubles using ant. I'm using Ubuntu 12.04, and have openjdk 7 java installed. I also setup the CLASSPATH to be the code folder When I run ant in code folder, this is the output: Exception in thread "main" java.lang.RuntimeException: JDK 1.4.1 or higher is required to run the examples in this book. [CheckVersion] at com.bruceeckel.tools.CheckVersion.main(Unknown Source) However when I run java -version, this is the output: java version "1.6.0_27" OpenJDK Runtime Environment (IcedTea6 1.12.5) (6b27-1.12.5-0ubuntu0.12.04.1) OpenJDK 64-Bit Server VM (build 20.0-b12, mixed mode) How to setup ant and classpath correctly?

  Read the article

• Announcing StorageTek LTO 6

  - by uwes

  Announcing StorageTek LTO-6 Full Height 8 Gb Fibre Channel IBM Tape Drives! We’re pleased to announce the availability of StorageTek LTO 6 tape drives in our StorageTek SL3000 and SL8500 modular tape libraries, which offers the following features: Higher Capacity - StorageTek LTO 6 drives have the ability to write 2.5 TB of native data to one LTO 6 cartridge, a 66% improvement over StorageTek LTO 5 Better Performance - StorageTek LTO 6 drive performance is 160 MB/sec (uncompressed), 14% faster than LTO 5 Investment Protection - StorageTek LTO 6 drives are backward read and write compatible to earlier generations for existing LTO customers  StorageTek LTO 6 will be in the system and orderable for the StorageTek SL3000 and SL8500 on Tuesday, December 4! For More Information Go To: Oracle.com Tape Page Oracle Technology Network Tape Page

  Read the article

• Versioning millions of files with distributed SCM

  - by C. Lawrence Wenham

  I'm looking into the feasibility of using off-the-shelf distributed SCMs such as Git or Mercurial to manage millions of XML files. Each file would be a commercial transaction, such as a purchase order, that would be updated perhaps 10 times during the lifecycle of the transaction until it is "done" and changes no more. And by "manage", I mean that the SCM would be used to not just version the files, but also to replicate them to other machines for redundancy and transfer of IP. Lets suppose, for the sake of example, that a goal is to provide good performance if it was handling the volume of orders that Amazon.com claimed to have at its peak in December 2010: about 150,000 orders per minute. We're expecting the system to be distributed over many servers in order to get reasonable performance. We're also planning to use solid-state drives exclusively. There is a reason why we don't want to use an RDBMS for primary storage, but it's a bit beyond the scope of this question. Does anyone have first-hand experience with the performance of distributed SCMs under such a load, and what strategies were used? Open-source preferred, since the final product is to be FOSS, too.

  Read the article

• Can I download & Install the wallpapers from Quantal 12.10 on Precise 12.04.1?

  - by Ankit

  I was googling regarding Ubuntu 12.10 (Quantal Quetzal); pretty much liked the wallpapers. Just out of curiosity, can I install the wallpapers from a higher release (12.10) on a previous release Precise (12.04.1) without upgrading to 12.10. I have tried the following:- ankit@stream:~$ sudo apt-get install ubuntu-wallpapers-quantal [sudo] password for ankit: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package ubuntu-wallpapers-quantal I have followed this post; but this for installing wallpapers from previous releases on the current release. Any ideas how can this be achieved.

  Read the article

• Is eCPMs dropping by about 50% in January a usual behavior on Google AdSense?

  - by Andrew G. Johnson

  So I just got semi-serious about running some AdSense sites over the past 6 months and the eCPM's have hovered between 1.38 and 1.42 [yes it's that close] when I look at the eCPM for each month. Obviously some deviation day to day but pretty damn close to a buck forty in aggregate. So far for January I am sitting at 0.80 for an eCPM. I know it's not a huge sample size but the daily pageviews are fairly consistent [actually a bit higher] than where they were in December. I am trying to justify this by thinking that somehow a lot of ad buyers buy inventory for the year and have to get setup to do another big buy now that it's a new calendar year but that thought isn't close to comforting. Is this happening to anyone else? EDIT: I run a lot of websites and the ratios of pageviews are about the same this month to last month but just to be clear the eCPM I posted is for 20 websites in a variety of niches, it doesn't accurately depict any one domain.

  Read the article

• Windows 2008 R2: can't extend C drive, mystery partitions

  - by wfaulk

  I have a Windows 2008 R2 server running under VMware ESX 4.0.0. I have reallocated disk space to it in order to extend the C drive, but Disk Management has "Extend Volume" greyed out. DISKPART shows more partitions than Disk Management shows, including one after the volume I'm trying to extend, which would explain why Disk Management isn't allowing the extension. Disk Management shows: System Reserved / 100MB NTFS / Healthy (System) (C:) / 39.39 GB NTFS / Healthy (Boot, Page File, Crash Dump) 10.00 GB / Unallocated DISKPART shows: Partition 1 Dynamic Data 992 KB 31 KB Partition 2 Dynamic Data 100 MB 1024 KB Partition 3 Dynamic Data 39 GB 101 MB Partition 4 Dynamic Data 1024 KB 39 GB My question at this point is: what the heck are partitions 1 and 4, where did they come from, why doesn't Disk Management show them, and, most importantly, can I delete partition 4 in order to extend partition 3?

  Read the article

• BizTalk 2009 - Custom Functoid Categories

  - by StuartBrierley

  I recently had cause to code a number of custom functoids to aid with some maps that I was writing. Once these were developed and deployed to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions a quick refresh allowed them to appear in toolbox.  After dropping these on a map and configuring the appropriate inputs I tested the map to check that they worked as expected.  All but one of the functoids worked as expecetd, but the final functoid appeared not to be firing at all. I had already tested the code used in a simple test harness application, so I was confident in the code used, but I still needed to figure out what the problem might be. Debugging the map helped me on the way; for some reason the functoid in question was not shown correctly - the functoid definition was wrong. After some investigations I found that the functoid type you assign when coding a custom functoid affects more than just the category it appears in; different functoid types have different capabilities, including what they can link too.  For example, a logical functoid can not provide content for an output element, it can only say whether the element exists.  Map this via a Value Mapping functoid and the value of true or false can be seen in the output element. The functoid I was having problems with was one whare I had used the XPath functoid type, this had seemed to be a good fit as I was looking up content in a config file using xpath and I wanted it to appear the advanced area.  From the table below you can see that this functoid type is marked as "Internal Only", preventing it from being used for custom functoids.  Changing my type to String allowed the functoid to function as expected. Category Description Toolbox Group Assert Internal Use Only Advanced Conversion Converts characters to and from numerics and converts numbers from one base to another. Conversion Count Internal Use Only Advanced Cumulative Performs accumulations of the value of a field that occurs multiple times in a source document and outputs a single output. Cumulative DatabaseExtract Internal Use Only Database DatabaseLookup Internal Use Only Database DateTime Adds date, time, date and time, or add days to a specified date, in output data. Date/Time ExistenceLooping Internal Use Only Advanced Index Internal Use Only Advanced Iteration Internal Use Only Advanced Keymatch Internal Use Only Advanced Logical Controls conditional behavior of other functoids to determine whether particular output data is created. Logical Looping Internal Use Only Advanced MassCopy Internal Use Only Advanced Math Performs specific numeric calculations such as addition, multiplication, and division. Mathematical NilValue Internal Use Only Advanced Scientific Performs specific scientific calculations such as logarithmic, exponential, and trigonometric functions. Scientific Scripter Internal Use Only Advanced String Manipulates data strings by using well-known string functions such as concatenation, length, find, and trim. String TableExtractor Internal Use Only Advanced TableLooping Internal Use Only Advanced Unknown Internal Use Only Advanced ValueMapping Internal Use Only Advanced XPath Internal Use Only Advanced Links http://msdn.microsoft.com/en-us/library/microsoft.biztalk.basefunctoids.functoidcategory(BTS.20).aspx http://blog.eliasen.dk/CommentView,guid,d33b686b-b059-4381-a0e7-1c56e808f7f0.aspx

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >