Search Results

Search found 9545 results on 382 pages for 'least privilege'.

Page 246/382 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Open Office crashes, recovers, crashes again

  - by Daniel R Hicks

  After completely reinstalling my laptop due to apparent registry corruption, I've encountered a problem with Open Office: I open a simple Calc spreadsheet, it comes up normally, but then after anywhere from 5 seconds to several minutes (without even touching the Calc window) OO crashes, then comes up through recovery. If I let it "recover" it will do so and bring the spreadsheet up again, only to repeat the crash scenario again. If I kept clicking "OK" it would apparently do this all day. I reinstalled OO once and the problem went away for awhile, but it came back. I then attempted to "reset" my profile (ie, rename the OO user directory in App Data), but OO crashed during the first startup after that, then resumed the original behavior. If I open the same file using Excel it complains of errors in the file, and "recovers" them, but the "error report" it generates contains no details. If I save the "recovered" file then OO Calc will open it, but the problem returns after saving again. Any ideas? (The system is Vista SP2, running OO 3.4.1) How to reproduce: Start Open Office Calc. Save workspace as "CrashTest.ods" From Task Manager kill Open Office (soffice.exe/bin -- one of each) Double click on the saved "CrashTest.ods" in Explorer. OO puts up a message that recovery will occur -- allow it. When the Calc window comes up, don't touch it -- just wait about 10 seconds. Calc window closes and OO puts up a message that recovery will occur -- from now on the sequence will repeat. I suspect this behavior is limited to a few (recent) versions of OO, and very possibly only Calc. Reported as Open Office Bug 1211094. Sigh!! As much as it irritates me, I'm having to switch over to Excel for several things I used to do with Calc. Excel has a miserable UI, but at least it says up for longer than 10 seconds.

  Read the article

• Passenger error: No such file or directory - config/environment.rb

  - by JJD

  I installed Redmine on MacOSX Server 10.6.8 according to this installation description. So far everything works fine: When I start webrick the server serves the Redmine pages. The gems and redmine are installed under the user "redmine". After that I aimed configuring apache2 with passenger as described here. As suggested by the description I also installed the passenger-pane which stores its virtual host configuration files in /private/etc/apache2/passenger_pane_vhosts. This is what I came up with after a lot of manual try and error. At least, now I can reach a passenger error page. // redmine.vhost.conf <VirtualHost *:80> ServerName host ServerAlias localhost DocumentRoot "/Users/redmine/Sites/redmine" # RackEnv production # RackBaseURI / RailsEnv production RailsBaseURI / # PassengerUser www-data # PassengerGroup www-data <Directory "/Users/redmine/Sites/redmine"> Order allow,deny Allow from all </Directory> </VirtualHost> However, the passenger module still runs into the following errors. Error message: No such file or directory - config/environment.rb The /var/log/apache2/error_log of the web server stated the following. [warn] NameVirtualHost *:80 has no VirtualHosts [notice] Apache/2.2.21 (Unix) Phusion_Passenger/3.0.12 configured -- resuming normal operations [ pid=21824 thr=2151905620 file=utils.rb:176 time=2012-06-01 18:22:07.126 ]: *** Exception Errno::ENOENT in PhusionPassenger::ClassicRails::ApplicationSpawner (No such file or directory - config/environment.rb) (process 21824, thread #<Thread:0x0000010086f2a8>): I experimented with the user switch functionality of passenger as described in the documentation - as you can tell from my configuration file. Though, I was not successful.

  Read the article

• MacBook Pro battery capacity 65K mAh

  - by Alexander Gladysh

  I have a 15" MacBook Pro 3.1 (that is Late 2007 model AFAIR). I've bought it new a couple of years ago. Recently its on-battery power lifespan became very short (30 to 10 minutes). When my notebook turns itself off due to "low battery" and I press the small button on the battery itself, all LED lights are alight, indicating full charge. When I plug in the power adapter, my Mac displays that "battery is fully charged, finishing charging process" (I have a Russian OS X 10.5.7, so that is a rough translation), but the LEDs on battery itself display (seemingly accurate) status that there are one or two "LEDs still not charged". My battery have as few as 37 recharge cycles (yes, I've neglected calibration over the time I've used it). Battery info programs like iBatt2 report battery capacity of 65 337 mAh (with by-design capacity of 5600 mAh). I get it that something went wrong with battery electronics. I've tried resetting my Mac's PRAM and SMC, it did not changed anything. Now I'm trying to recalibrate the battery, but looks like it does not help as well. Will try to recalibrate it several times in a row. I'd buy a new battery if I knew if it is battery fault, not a notebook's. Any suggestions? Update: After recalibration, my battery status now displays battery capacity of 1500 mAh. But with every recalibration (or simply when I use notebook without power adapter plugged in) this number changes in the range from 200 mAh to 1700 mAh. LEDs on battery now are synchronous with what nodebook thinks on the charge level. Also I've noticed that cycle count changes rather slowly. It is now 39, it was 37 when I've started recalibration, and I went through the process at least ten times... So, the main question is: does it look like that replacing the battery would help me (or does it look like this is notebook's problem)? I guess I should try replacing the battery.

  Read the article

• Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

  - by peterjmag

  [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• SQL Server transaction log backups,

  - by krimerd

  Hi there, I have a question regarding the transaction log backups in sql server 2008. I am currently taking full backups once a week (Sunday) and transaction log backups daily. I put full backup in folder1 on Sunday and then on Monday I also put the 1st transaction log backup in the same folder. On tuesday, before I take the 2nd transaction log backup I move the first transaction log backup from folder1 an put it into folder2 and then I take the 2nd transaction log backup and put it in the folder1. Same thing on Wed, Thurs and so on. Basicaly in folder1 I always have the latest full backup and the latest transaction log backup while the other transaction log backups are in folder2. My questions is, when sql server is about to take, lets say 4th (Thursday) transaction log backup, does it look for the previous transac log backups (1st, 2nd, and 3rd) so that this new backup will only include the transactions from the last backup or it has some other way of knowing whether there are other transac log backups. Basically, I am asking this because all my transaction log backups seem to be about the same size and I thought that their size will depend on the amount of transactions since the last transaction log backup. Example: If you have a, lets say, full backup and then you take a transac log backup and this transac log backup is lets say 200 MB and now you immediatelly take another transac log backup, this last transac log backup should be considerably smaller than the first one because no or almost no transaction occured between these two backups, right? At least, that's what I've been assuming. What happens in my case is that this second backup is pretty much the same size as the first one and I am wondering if the reason for that is because I moved the first transac log backup to a different folder so now sql server thinks that all I have is just a full backup and it then gets all the transactions that happened since the full backup and puts it in the 2nd transac log backup. Can anyone please explain if my assumptions are right? Thanks...

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Windows 7 install detects SSD but doesn't list it to install to

  - by Mohamed Meligy

  I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

  Read the article

• How to install/upgrade to Windows 8.1 RTM without a Microsoft account

  - by abstrask

  When I installed Windows 8, I deliberately chose not to use a Microsoft account to sign in. I like to keep things separate, and just logon with a tradional local account. Any apps that require me to sign-in with my Live account, will have to prompt me to sign-in. Now, I just updated to 8.1, but towards the end of the setup process, I was asked to sign-in with a Microsoft account or create one. Unlike when installation Windows 8, there didn't seem to be any option to skip that step, or otherwise close the sign-in prompt and continue to my updated Windows installation. At least not that I could find. This is particular annyoing, when setting up computers for friends and family, whom I support. They may not have, or have any interest in getting, a Microsoft account and I'm reluctant to use my own. I realize I can disconnect my Microsoft account after the fact, but is there really no way to install, or upgrade to, Windows 8.1, without being forced to create a Microsoft account? If there is, how does one go a about that?

  Read the article

• ZFS - zpool ARC cache plus L2ARC benchmarking

  - by jemmille

  I have been doing lots of I/O testing on a ZFS system I will eventually use to serve virtual machines. I thought I would try adding SSD's for use as cache to see how much faster I can get the read speed. I also have 24GB of RAM in the machine that acts as ARC. vol0 is 6.4TB and the cache disks are 60GB SSD's. The zvol is as follows: pool: vol0 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM vol0 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 cache c3t5001517958D80533d0 ONLINE 0 0 0 c3t5001517959092566d0 ONLINE 0 0 0 The issue is I'm not seeing any difference with the SSD's installed. I've tried bonnie++ benchmarks and some simple dd commands to write a file then read the file. I have run benchmarks before and after adding the SSD's. I've ensured the file sizes are at least double my RAM so there is no way it can all get cached locally. Am I missing something here? When am I going to see benefits of having all that cache? Am I simply not under these circumstances? Are the benchmark programs not good for testing the effect of cache because of the the way (and what) it writes and reads?

  Read the article

• Contacts Issue: Google Contacts, Nokia 5800 And Outlook, Sync and Images

  - by josecortesp

  Hello everyone, this is a multi-question, so please, feel free to answer just one or all of them. My actual situation is: Google contacts sync with Nokia 5800 using MFE(google sync), using google's fake "exchange server". Outlook sync with google using GoContact Sync software (http://www.webgear.co.nz/Products/GOContactSync.aspx). What I want, a easy(or not) way to correctly sync the three of them, even if I have to change some of my "escenario". I know outlook<-google contacts sync is not good yet, but if someone can suggest me some better SW than GoContact Sync. It'll be good. What I really want is to sync a least name, phone, email and image. Then, is there a way to get all my google contacts to by default use their own google image? I noted that, usually i have to manually choose it, and sometimes it doesn't work. I'll like to use something or someone's service to do this automatically. I have tried some services like Soocial, but it gives me a lot of trouble after the first sync, because soccial can ONLY get ALL your contacts, not just "My Contacts"; and also it gives me like 100 bad contacts in outlook because of their beta client. The final goal of all of this is to Get only "My Contacts" from google in Outlook and in the 5800 with their images Get ALL my contacts with their default image, meaning, the contact's personal image Get a solution to correctly sync the three of them, using Google's as the base for the rest of them. Thanks in advance. Again, feel free to sugest me solutions to just one or all them.

  Read the article

• "Windows detected a hard drive" issue in Windows 7 x64

  - by Jasiu

  I upgraded to the OCZ-Agility3 120GB from a 60 OCZ Vertex2 SSD. I cloned the drive from the Vertex to the new Agility. Everything seemed to have gone well and have not had any problems. Recently in the passed month I have gotten this error: I downloaded teh OCZToolboxMP and ran the SMART utility and don't see anything wrong: SMART READ DATA ModelNumber : OCZ-AGILITY3 Serial Number : OCZ-Y1945X77438P4NU6 WWN : 5-e8-3a-97 ebea5ba76 Revision: 10 Attributes List 1: SSD Raw Read Error Rate Normalized Rate: 70 total ECC and RAISE errors 5: SSD Retired Block Count Reserve blocks remaining: 100% 9: SSD Power-On Hours Total hours power on: 968 12: SSD Power Cycle Count Count of power on/off cycles: 28 171: SSD Program Fail Count Total number of Flash program operation failures: 0 172: SSD Erase Fail Count Total number of Flash erase operation failures: 0 174: SSD Unexpected power loss count Total number of unexpected power loss: 11 177: SSD Wear Range Delta Delta between most-worn and least-worn Flash blocks: 0 181: SSD Program Fail Count Total number of Flash program operation failures: 0 182: SSD Erase Fail Count Total number of Flash erase operation failures: 0 187: SSD Reported Uncorrectable Errors Uncorrectable RAISE errors reported to the host for all data access: 4145 194: SSD Temperature Monitoring Current: 30 High: 30 Low: 30 195: SSD ECC On-the-fly Count Normalized Rate: 120 196: SSD Reallocation Event Count Total number of reallocated Flash blocks: 100 201: SSD Uncorrectable Soft Read Error Rate Normalized Rate: 120 204: SSD Soft ECC Correction Rate (RAISE) Normalized Rate: 120 230: SSD Life Curve Status Current state of drive operation based upon the Life Curve: 100 231: SSD Life Left Approximate SDD life Remaining: 100% 241: SSD Lifetime writes from host lifetime writes 893 GB 242: SSD Lifetime reads from host lifetime reads 968 GB Does anyone have any ideas of what might be wrong and or how I can go about fixing this? Please let me know if there is other information I can provide. Thanks for your help Windows 7 x64 SP1 AMD Phenom II X4 940 8GB RAM

  Read the article

• Still about SSD potentials...write and read speed

  - by Macroideal

  I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

  Read the article

• mysql_tzinfo_to_sql missing on my system

  - by Sk1ppeR

  I ran into problem with timezones within MySQL. Long story short, my application is worldwide, and each database has it's own timezone set within the application (not the server) in the way of "Europe/Berlin", "Europe/Vienna", "America/Sao Paulo". Obviously this is unacceptable for MySQL at first per connection. I read that it handles data better if you use UTC offsets. Basically my goal is to log a field's alteration in another table using a trigger. For that I use UNIX_TIMESTAMP within the trigger. Although UNIX_TIMESTAMP() follows the global timezone for the server which obviously bothers me a lot :| So I went to search for a "per connection" solution to use inside the trigger and well I found that mysql_tzinfo_to_sql can actually import zone info (UTC offsets) from my linux's zoneinfo files. Although to my amuse, when I ran the commant I got the following: bash: mysql_tzinfo_to_sql: command not found So I'm looking for a solution to fix that. I don't want to "map" the timezone names into UTC offset just so I could use in the trigger. Is there an alternative tool? Or at least sources for this one in particular only? What kind of queries does this tool generates so I could do it manually then if there is no alternative tool. Thanks in advance on any help on the issue! P.S: The OS is Debian GNU/Linux 6.0 and the MySQL server is the one from aptitude with performance tweaks with my.cnf

  Read the article

• Windows 7 alt-tab window disappears to back when aero peek is enabled

  - by nhinkle

  There is a strange bug with Aero Peek and Alt-Tab where the Alt-Tab window itself is sent all of the way to the back, and is obscured by whatever window may be being previewed in front of it. While it still works for switching tabs, it's extremely annoying to not be able to see what other windows are there. One solution I've found is to just disable Aero Peek, but I like the Aero Peek feature when it works, and want it enabled. Some users of Lenovo products have found that uninstalling the "Thinkvantage communications" VoIP suite fixes it for them, but my laptop is an HP, not a Lenovo. The only VoIP software I have installed is Skype, which I removed to see if it had something to do with VoIP, but that didn't have any effect. I had seen this issue before on my old laptop, but it usually went away after a while, and always after a reboot. On my new computer (HP dm4t) it always occurs, and is driving me nuts. If anybody can actually pinpoint what the problem is and more importantly how to fix it, I will be extremely thankful. Window being previewed is in front of the Alt-Tab window Update: The issue seems to have randomly resolved itself, at least for now. I have no idea what changed, since I haven't made any modifications to the system between when it was broken and when it started working. Attached is another screenshot of it working properly, with the alt-tab window in front of everything else. I'd still like to know what causes this if anybody can determine it. Update 2: And now it's broken again...

  Read the article

• Update to Lion, Cannot boot into Bootcamp partitions, but can use in Parallels

  - by Jon Jester

  Using Snow Leopard had boot camp partitions for both XP and Windows 7. These were both accessible through Parallels 7 or through direct boot through boot camp. Each is on a separate partitioned hard drive. Upgraded to Lion, both were still accessible through Parallels, but have not been able to directly boot into either. Unfortunately is important to me to be able to boot into a least the Windows 7 partition. Have tried virtually everything I can find online. Seen similar issues, but nothing where they were usable virtually but not directly. Nothing works. reFit, correcting the master boot records in Windows with command line, have wiped the Windows 7 partition clean and reinstalled Windows 7 several times 1st using Boot Camp4 drivers then using Boot Camp3 drivers. Have tried resizing the bootcamp partitions. When booting into the Boot Camp partitions directly will go all the way to seeing the desktop before it fails, where I get a Windows error screen. I can see all the disks and their appropriate partitions both in OS X disk utility as well as the Windows installer utility.

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0?

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). xxxx:xxxx:xxxx/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else?

  Read the article

• IRC newbie needs detailed "How To" directions for freenode.net connection with OS X IRC app

  - by Johnny Utahh

  Newbie IRC user here. Trying to get connected on freenode.net, preferably with a native Mac OS X client (I'm running 10.6.8), or at least something with a good "OS X feel." Also seeking a client that comes "well regarded" in Mac community (eg, Linkinus reflects outstanding Apple App Store user ratings). Thus far have found it remarkably difficult to "get started from scratch" with ANY client. All attempted clients (Colloquy, Textual, Linkinus) experience some sort of "* Notice -- You need to identify via SASL to use this server" error. I see this freenode SASL-friendly client list; am I really limited to only these clients? This "IRC-freenode startup" procedure has been far more difficult than I had originally anticipated. Why can't I just do this and have it "just work"? Bottom line: looking for a "chapter and verse"/cookbook description of how to get started with freenode.net IRC chat rooms on Mac OS. Need reference to known-working client, and then exact directions on how to get connected to a chat room with a nickname.

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• Explorer and open file dialog not responding (Vista)

  - by rohancragg

  Any explorer window opened for the first time on my machine causes the explorer window to display the folders tree and folder path in the address bar immediately but the file/folder list pane is blank and the window displays 'Not Responding' in the title bar, this hangs for up to a minute or more. Any file dialog displays 'Not Responding' in the title bar. The files list is eventually displayed after a few seconds or more. Steps to repro: Close all open instances of explorer Windows Key | Run | [enter a folder path such as 'c:\temp'] Or within any app: use a file open / save dialog Once there is at least one open instance of explorer the performance is still fairly poor but not nearly so bad and file lists are displayed in a timely fashion. What I've tried: Cleaned up registry with CCleaner tool, and uninstalled all other unused software Checked nothing unwanted running at startup with Autoruns Removed any ISO burner/recorder/mount software Still to try Get latest version of everything - especially stuff with shell extension behaviour such as TortoiseSVN Anyone have any other suggestions? Thanks alot. Update I'm wondering if this is related, I'll try the hotfix when I get home and report back: KB972685 - FIX:Explorer.exe hangs when using a shell extension written using MFC Update 2 Before I got a chance to try the hotfix it seems one of the above actions fixed this for me; either the removal of IsoRecorder or TortoiseHg (which I was no longer using anyway). Update 3 A similar issue with Explorer.exe has come back since installing TortoiseHg 1.01 :-(

  Read the article

• Online Storage and security concerns

  - by Megge

  I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

  Read the article

• ATI gpu (video accel, decode, encode, ATI Stream, DXVA)

  - by Shiki

  Okay its a long question title for sure. I'm looking for a new video card (yes,SU is not a page for that, but wait). I've been a loyal NVidia customer ever since, now using a 8600gts. Old but still somewhat good, its a bit slow though. I want an upgrade because 8600gts wont support better vdpau and new features. I checked out the prices and the documents, I would need a GTX260 card. Which costs ..well.. a lot. ATI performs much better for that price. (At least on every test it outperforms GTX260). However, as far as I know there is no gpu accel with ATI. The things you can use is DXVA only, no other method. Could you correct me out there? Will be there a gpu accel for ATI also? Or is there one available? (DXVA is not bad, but kinda slow compared to NVIdia's CUDA.) What about openCL? How does ATI support that? (I'm talking about the 5850 ATI card at the minute, I would buy that instead of the NVidia.)

  Read the article

• Can I change the user id of a user on one Linux server to match another server in /etc/passwd?

  - by user76177

  I have a Rails application that is on a virtual machine (RHEL 6) and it's database is on dedicated hardware (also RHEL 6). The app server has an NFS directory from the db server mounted and accessible. It needs to write images to that server that are uploaded via the app. Background processes on the db server need to read and write to the same directory, as they perform resizing operations on the uploaded files. Right now none of this is working, because the user ids are different between the two systems. I only need this to work for this one application, so it is way too much overhead to put an LDAP system in place. Can I simply change the user id of this one user in one of the systems, or will that cause mass chaos? UPDATE: The fix worked, at least on local devices. Unfortunately the device I have mounted to the main db server still thinks my user id is 502 instead of 506. Do I need to remount that device, or is there an NFS daemon I can stop and restart to refresh it?

  Read the article

• Exim rejects recipient address on my domain

  - by Nicolas

  Hi, I have a dedicated server (debian) on which I have installed Exim and Dovecot. Everything worked fine until around a month ago. I tried to reinstall and reconfigure exim but I keep having all the incoming emails rejected. Outlook says: A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after RCPT TO:: host mail.mydomain.com [94.76.##.##]: 550 relay not permitted GMAIL: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). On the server side, my rejectlog file shows: 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted ... and the mainlog file: 2011-01-04 17:00:01 1PaAEr-0007vN-DX <= root@ETC_MAILNAME U=root P=local S=869 2011-01-04 17:00:01 1PaAEr-0007vN-DX ** root@etc_mailname: Unrouteable address 2011-01-04 17:00:01 1PaAEr-0007vY-Kn Error while reading message with no usable sender address (R=1PaAEr-0007vN-DX): at least one malformed recipient address: root@ETC_MAILNAME - malformed address: _MAILNAME may not follow root@ETC 2011-01-04 17:00:01 1PaAEr-0007vN-DX Process failed (1) when writing error message to root@ETC_MAILNAME (frozen) 2011-01-04 17:09:21 no IP address found for host MAIN_RELAY_NETS (during SMTP connection from mail-qw0-f53.google.com [209.85.216.53]) 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted then after the message becomes frozen: 2011-01-04 17:28:44 1PaAEr-0007vN-DX Message is frozen Thank you for your help, any idea/comment is welcomed as I am really running out of idea to fix this issue, Nicolas. Oh and the PHP mail() function does not do anything as well, would it be linked to? I think mail() uses sendmail from my php.ini.

  Read the article

• How do I Setup Multiple Sites in HostGator Shared Hosting?

  - by cillosis

  I recently decided to consolidate all of my random projects into a single hosting account as it was starting to get very expensive to run each on an individual hosting plan. I purchased the HostGator Baby plan which allows hosting of multiple domains. You have to set it up with a root domain name which is fine (I used my portfolio domain name). As far as file structure, I wanted a folder for each site in /public_html so the structure looks like this: - public_html/ - myportfolio.com/ - ... my files ... - anothersite.com/ - ... my files ... - thirdsite.com/ - ... my files ... I setup add-on domains and pointed them to their respective folders which works fine. My problem is the root domain ex. myportfolio.com expects it's files to be contained at the root of /public_html rather than within it's folder I created. I setup a redirect to point requests for myportfolio.com to myportfolio.com/myportfolio.com/ which works initially except (at least in my WordPress installation) it still references it's root folder as public_html. TL;DR; What is the best way to go about setting up multiple site hosting in a shared hosting environment (i.e. I can't setup vhosts). Does anybody know of any tutorials or videos that walk through this more clearly? Thanks.

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >