Search Results

Search found 40893 results on 1636 pages for 'product id'.

Page 246/1636 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Check if value of textbox extended with MaskedEditExtender is valid?

  - by Ismail S

  Below is my code: <asp:TextBox ID="FromDateTextBox" runat="server" /> <asp:ImageButton ID="FromDateImageButton" runat="server" ImageUrl="~/images/calander.png" /> <ajaxkit:CalendarExtender ID="FromDate" runat="server" TargetControlID="FromDateTextBox" CssClass="CalanderControl" PopupButtonID="FromDateImageButton" Enabled="True" /> <ajaxkit:MaskedEditExtender id="FromDateMaskedEditExtender" runat="server" targetcontrolid="FromDateTextBox" Mask="99/99/9999" messagevalidatortip="true" onfocuscssclass="MaskedEditFocus" oninvalidcssclass="MaskedEditError" masktype="Date" displaymoney="Left" acceptnegative="Left" errortooltipenabled="True" /> <ajaxkit:MaskedEditValidator id="FromDateMaskedEditValidator" runat="server" controlextender="FromDateMaskedEditExtender" controltovalidate="FromDateTextBox" emptyvaluemessage="Date is required" invalidvaluemessage="Date is invalid" display="Dynamic" tooltipmessage="Input a date" emptyvalueblurredtext="*" invalidvalueblurredmessage="*" validationgroup="MKE" /> I've set Culture="auto" UICulture="auto" in @Page directive and EnableScriptGlobalization="true" EnableScriptLocalization="true" in script manager to have client culture specific date format in my textbox. I also have a Go button on my page on which I will do a partial post back. So, I want to validate the FromDateTextBox in javascript when the Go button is clicked.

  Read the article

• htaccess rewriterule question

  - by Viktor Onozo

  RewriteRule ^([a-z]{2}/){0,1}showCategory/([0-9]*)/[a-z\-_0-9\+]*/mp/(.*)(/{0,1})$ /main.php?id=$2&il[lang]=$1&$3 [L] RewriteRule ^([a-z]{2}/){0,1}showCategory/([0-9]*)/[a-z\-_0-9\+]*/(.*)/mp/(.*)(/{0,1})$ /main.php?id=$2&il[lang]=$1&page=$3&$4 [L] RewriteRule ^([a-z]{2}/){0,1}showCategory/([0-9]*)(/{0,1})/[a-z\-_0-9\+]*$ /main.php?id=$2&il[lang]=$1 [L] RewriteRule ^([a-z]{2}/){0,1}showCategory/([0-9]*)/[a-z\-_0-9\+]*/([0-9]*)(/{0,1})$ /main.php?id=$2&il[lang]=$1&page=$3 [L] RewriteRule ^([a-z]{2}/){0,1}showCategory$ /main.php?id=0&il[lang]=$1 [L] I use these lines and localhost/showCategory/ is OK, localhost/showCategory/0/1 is OK, localhost/showCategory/0/2 stays on the first page...(same 0/1) not good What is the problem? When I delete this /[a-z\-_0-9\+]* from the 3. and 4. line then it's OK, but then is a problem with this URL: http://localhost/showCategory/627/prodaja-automobila

  Read the article

• Slow SelectSingleNode

  - by Simon

  I have a simple structured XML file like this: <ttest ID="ttest00001", NickName="map00001"/> <ttest ID="ttest00002", NickName="map00002"/> <ttest ID="ttest00003", NickName="map00003"/> <ttest ID="ttest00004", NickName="map00004"/> ..... This xml file can be around 2.5MB. In my source code I will have a loop to get nicknames In each loop, I have something like this: nickNameLoopNum = MyXmlDoc.SelectSingleNode("//ttest[@ID=' + testloopNum + "']").Attributes["NickName"].Value This single line will cost me 30 to 40 millisecond. I searched some old articles (dated back to 2002) saying, use some sort of compiled "xpath" can help the situation, but that was 5 years ago. I wonder is there a mordern practice to make it faster? (I'm using .NET 3.5)

  Read the article

• How to Uncheck A radio button

  - by user281867

  Hi, I have two forms, one with a radio button that users must select to edit. [form name="A"] [input type="radio" name="BookItem" value="1" /] [input type="radio" name="BookItem" value="2" /] [input type="radio" name="BookItem" value="3" /] [form] After "BookItem" is selected from form (A) I call the $("#EditFormWrapper").load("callEditData.cfm? ID="+ID); function to load the second form (B) [form id="editForm" name="B"] 2 Hours AM 2 Hours PM 2 Hours AM 2 Hours PM [input type="image" src="images/submit-btn.gif" id="addBTN" name="addBTN" class="buttons" alt="SubmitRrequest" /] [input type="image" src="images/cancel-btn.gif" id="editBTNcancel" name="editBTNcancel" class="buttons" alt="Cancel Request" /] [/form] I want to uncheck the radio button on form (A) when user click on cancel button (editBTNcancel) in form(B). Here s my script: $("#editBTNcancel").live("click", function(event){ event.preventDefault(); $("#EditFormWrapper").slideUp("fast").empty(); //$('.TOR2Hours').removeAttr('checked'); $('.TOR2Hours').attr('checked', false); }); I hope I clearly state my problem, any suggestion would be greatly appreciated!

  Read the article

• AutoMapper How to map nested object from an ObjectId

  - by RayMartinsHair

  I am trying to map the ReferralContract.AssessmentId property to Referral.Assessment.Id The below code works but I am sure that there is a cleaner way to do.... Please tell me this is so ;-) // Destination classes public class Referral { public Referral() { Assessment = new Assessment(); } public int Id { get; set; } public Assessment Assessment { get; set; } } public class Assessment { public int Id { get; set; } } // Source Class public class ReferralContract { public int Id { get; set; } public int AssessmentId { get; set; } } The Automapper mapping I am using is Mapper.CreateMap<ReferralContract, Referral>() .ForMember(x => x.Assessment, opt => opt.MapFrom(scr => new Assessment { Id = scr.AssessmentId }));

  Read the article

• Using WebParts results in blank page

  - by dale

  Hi, I'm developing an ASP.NET (C#) application using EPiServer CMS 5. On the startpage we have four WebPart-zones and everything works great running it through Visual Studio. When publishing it to the production-server the startpage shows as a blank page, no error what so ever... When we remove these lines of code it works, so it has something to do with the WebParts. <WebParts:ExtendedWebPartManager ID="WebPartsManager" runat="server"></WebParts:ExtendedWebPartManager> <WebParts:ExtendedWebPartZone WebPartProperty="WebPartZone1" runat="server" ID="WebPartZone1" PartChromeType="None" AllowLayoutChange="false" Padding="0" PartChromePadding="0" Width="100%"></WebParts:ExtendedWebPartZone> <WebParts:ExtendedWebPartZone WebPartProperty="WebPartZone2" runat="server" ID="WebPartZone2" PartChromeType="None" AllowLayoutChange="false" Padding="0" PartChromePadding="0" Width="100%"></WebParts:ExtendedWebPartZone> <WebParts:ExtendedWebPartZone WebPartProperty="WebPartZone3" runat="server" ID="WebPartZone3" PartChromeType="None" AllowLayoutChange="false" Padding="0" PartChromePadding="0" Width="100%"></WebParts:ExtendedWebPartZone> <WebParts:ExtendedWebPartZone WebPartProperty="WebPartZone4" runat="server" ID="WebPartZone4" PartChromeType="None" AllowLayoutChange="false" Padding="0" PartChromePadding="0" Width="100%"></WebParts:ExtendedWebPartZone>

  Read the article

• textbox not getting refreshed

  - by oo

  i am doing an ajax call and i refresh a partial view. Inside the partial view i have this: <%=Html.TextBox("instance.Id", Model.Id)%> when i put a breakpoint here over Model.Id it has a number in it but after the ajax refresh is done the textbox just shows up with a 0. When i do a full browser refresh, the correct number shows up in the textbox. when i use firebug to look at data in my callback i see this: <input id="instance_Id" name="instance.Id" type="text" value="0" /> Everything else in the partial view refreshes fine. any ideas on what could be going wrong here?

  Read the article

• How to do this layout? (Link on Image)

  - by Spredzy

  Hi all, I was wondering how to obtain this result : http://img718.imageshack.us/img718/6173/screenshot20100411at126.png This is what I tried : <RelativeLayout android:layout_width="fill_parent" android:layout_height="wrap_content" android:background="#CCCCCC" android:orientation="horizontal" android:layout_weight="0"> <Button android:id="@+id/btn_cancel" android:text="@string/cancel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_margin="5px" android:gravity="left" /> <Button android:id="@+id/btn_save" android:text="@string/save" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_margin="5px" android:layout_toRightOf="@id/btn_cancel" android:gravity="right"/> </RelativeLayout> I tried to play with the layout_width properties and setting them up to fill parents both of them but did not work, if anyone has an idea ... Thank you !

  Read the article

• MsSQL 2005 query performance

  - by Max

  I have the following query: select ............. from //one table and about 20 left joins// where ( ( this_.driverName like 'blah*' or this_.renterName like 'blah*' ) or exists ( select this0__.id as y0_ from ThirdParty this0__ where this0__.name like 'blah*' and this0__.claim_id=this_.id ) ) order by this_.id asc And I have two environment: One with 175 000 records in table "this_" and second with 25 000 records in table "this_". This query works right on 175k database and it works smth about 2 seconds, but on base with 25k this query freezes. and if drop one the folloing item from where clause: ( this_.driverName like 'blah*' or this_.renterName like 'blah*' ) or exists ( select this0__.id as y0_ from ThirdParty this0__ where this0__.name like 'blah*' and this0__.claim_id=this_.id ) query runs normally. How can I to increase performance of this query?

  Read the article

• ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages

  - by DigiMortal

  If you are using AppFabric Access Control Services to authenticate users when they log in to your community site using Live ID, Google or some other popular identity provider, you need more than AuthorizeAttribute to make sure that users can access the content that is there for authenticated users only. In this posting I will show you hot to extend the AuthorizeAttribute so users must also have user profile filled. Semi-authorized users When user is authenticated through external identity provider then not all identity providers give us user name or other information we ask users when they join with our site. What all identity providers have in common is unique ID that helps you identify the user. Example. Users authenticated through Windows Live ID by AppFabric ACS have no name specified. Google’s identity provider is able to provide you with user name and e-mail address if user agrees to publish this information to you. They both give you unique ID of user when user is successfully authenticated in their service. There is logical shift between ASP.NET and my site when considering user as authorized. For ASP.NET MVC user is authorized when user has identity. For my site user is authorized when user has profile and row in my users table. Having profile means that user has unique username in my system and he or she is always identified by this username by other users. My solution is simple: I created my own action filter attribute that makes sure if user has profile to access given method and if user has no profile then browser is redirected to join page. Illustrating the problem Usually we restrict access to page using AuthorizeAttribute. Code is something like this. [Authorize] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } If this page is only for site users and we have user profiles then all users – the ones that have profile and all the others that are just authenticated – can access the information. It is okay because all these users have successfully logged in in some service that is supported by AppFabric ACS. In my site the users with no profile are in grey spot. They are on half way to be users because they have no username and profile on my site yet. So looking at the image above again we need something that adds profile existence condition to user-only content. [ProfileRequired] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } Now, this attribute will solve our problem as soon as we implement it. ProfileRequiredAttribute: Profiles are required to be fully authorized Here is my implementation of ProfileRequiredAttribute. It is pretty new and right now it is more like working draft but you can already play with it. public class ProfileRequiredAttribute : AuthorizeAttribute {     private readonly string _redirectUrl;       public ProfileRequiredAttribute()     {         _redirectUrl = ConfigurationManager.AppSettings["JoinUrl"];         if (string.IsNullOrWhiteSpace(_redirectUrl))             _redirectUrl = "~/";     }              public override void OnAuthorization(AuthorizationContext filterContext)     {         base.OnAuthorization(filterContext);           var httpContext = filterContext.HttpContext;         var identity = httpContext.User.Identity;           if (!identity.IsAuthenticated || identity.GetProfile() == null)             if(filterContext.Result == null)                 httpContext.Response.Redirect(_redirectUrl);          } } All methods with this attribute work as follows: if user is not authenticated then he or she is redirected to AppFabric ACS identity provider selection page, if user is authenticated but has no profile then user is by default redirected to main page of site but if you have application setting with name JoinUrl then user is redirected to this URL. First case is handled by AuthorizeAttribute and the second one is handled by custom logic in ProfileRequiredAttribute class. GetProfile() extension method To get user profile using less code in places where profiles are needed I wrote GetProfile() extension method for IIdentity interface. There are some more extension methods that read out user and identity provider identifier from claims and based on this information user profile is read from database. If you take this code with copy and paste I am sure it doesn’t work for you but you get the idea. public static User GetProfile(this IIdentity identity) {     if (identity == null)         return null;       var context = HttpContext.Current;     if (context.Items["UserProfile"] != null)         return context.Items["UserProfile"] as User;       var provider = identity.GetIdentityProvider();     var nameId = identity.GetNameIdentifier();       var rep = ObjectFactory.GetInstance<IUserRepository>();     var profile = rep.GetUserByProviderAndNameId(provider, nameId);       context.Items["UserProfile"] = profile;       return profile; } To avoid round trips to database I cache user profile to current request because the chance that profile gets changed meanwhile is very minimal. The other reason is maybe more tricky – profile objects are coming from Entity Framework context and context has also HTTP request as lifecycle. Conclusion This posting gave you some ideas how to finish user profiles stuff when you use AppFabric ACS as external authentication provider. Although there was little shift between us and ASP.NET MVC with interpretation of “authorized” we were easily able to solve the problem by extending AuthorizeAttribute to get all our requirements fulfilled. We also write extension method for IIdentity that returns as user profile based on username and caches the profile in HTTP request scope.

  Read the article

• What does this error states in asp.net-mvc?

  - by Pandiya Chendur

  I have repository class in asp.net mvc which has this, public Material GetMaterial(int id) { return db.Materials.SingleOrDefault(m => m.Mat_id == id); } And my controller has this for details action result, ConstructionRepository consRepository = new ConstructionRepository(); public ActionResult Details(int id) { Material material = consRepository.GetMaterial(id); return View(); } But why i get this error, The parameters dictionary contains a null entry for parameter 'id' of non-nullable type 'System.Int32' for method 'System.Web.Mvc.ActionResult Details(Int32)' in 'CrMVC.Controllers.MaterialsController'. To make a parameter optional its type should be either a reference type or a Nullable type. Parameter name: parameters Any suggestion...

  Read the article

• one page over 9 different urls

  - by Ali Demirtas

  Hi I am using prestashop as the cart for my website. I have a problem; the website used to be in dynamic urls. I enabled friendly url writing. The problem is that one page has more than one url. You can access a same page from the dynamic url and static url. In fact a single page has 9 different urls. This obviously creates problems for seo as search engines penalize my website for this. Here are examples of a page with more than 2 urls (http://www.turkishfootballstore.com/lang-nl/product.php?id_product=515) (http://www.turkishfootballstore.com/fenerbahce/515-fenerbahce-thuisshirt-20092010.html) (http://www.turkishfootballstore.com/lang-nl/fenerbahce/515-fenerbahce-thuisshirt-20092010.html) you can see even the static url's have 2 one with language defined and the other without. out fo the three urls above the correct one is the one at the bottom. What can I do to solve this problem? I have no knowledge of programming. Here is the htaccess for the website. Any sample code or help is really appreciated. There is 550 pages and every page is published in 17 different languages I want to use a 301 auto redirect. What is the simplest way to do it? I have no idea of coding. # URL rewriting module activation RewriteEngine on # URL rewriting rules RewriteRule ^([a-z0-9]+)\-([a-z0-9]+)(\-[_a-zA-Z0-9-]*)/([_a-zA-Z0-9-]*)\.jpg$ /img/p/$1-$2$3.jpg [L,E] RewriteRule ^([0-9]+)\-([0-9]+)/([_a-zA-Z0-9-]*)\.jpg$ /img/p/$1-$2.jpg [L,E] RewriteRule ^([0-9]+)(\-[_a-zA-Z0-9-]*)/([_a-zA-Z0-9-]*)\.jpg$ /img/c/$1$2.jpg [L,E] RewriteRule ^lang-([a-z]{2})/([a-zA-Z0-9-]*)/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$3&isolang=$1$5 [L,E] RewriteRule ^lang-([a-z]{2})/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$2&isolang=$1$4 [L,E] RewriteRule ^lang-([a-z]{2})/([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /category.php?id_category=$2&isolang=$1 [QSA,L,E] RewriteRule ^([a-zA-Z0-9-]*)/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$2$4 [L,E] RewriteRule ^([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$1$3 [L,E] RewriteRule ^([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /category.php?id_category=$1 [QSA,L,E] RewriteRule ^content/([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /cms.php?id_cms=$1 [QSA,L,E] RewriteRule ^([0-9]+)__([a-zA-Z0-9-]*)(.*)$ /supplier.php?id_supplier=$1$3 [QSA,L,E] RewriteRule ^([0-9]+)_([a-zA-Z0-9-]*)(.*)$ /manufacturer.php?id_manufacturer=$1$3 [QSA,L,E] RewriteRule ^lang-([a-z]{2})/(.*)$ /$2?isolang=$1 [QSA,L,E] # Catch 404 errors ErrorDocument 404 /404.php Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^***.com [NC] RewriteRule ^(.*)$ http://www.***.com/$1 [L,R=301] Options +FollowSymLinks RewriteEngine on # index.php to / RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.php\ HTTP/ RewriteRule ^(.*)index\.php$ /$1 [R=301,L] Header set Cache-Control: "no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0"

  Read the article

• how to precompile a jquery ui autocomplete widget?

  - by Alex

  Hello, I have a jquery ui autocomplete widget in a form and I'd like to preselect its value from a database. My autocomplete works in the following way: the id is a number, tha label and the value are the same and are a concatenation of id + " - " + description. When a value from the autocomplete is selected, a hidden field's value is set to the value of id. Then, the hidden field value is saved to the db when the form is submitted. When the user comes back on the page for editing, I need to reload the value from the db: I set the idden field value again and then I would like to precompile the value of the autocomplete widget with the concatenation of id + " - " + description taken form the db. I think I should trigger the event of selecting a row in the autocomplete, but I don't know how to do. Do you have any ideas? Thank you Here is the code of the autocomplete: $('#codice_contratto').autocomplete({ source: 'do_contratto.php', select: function(event, ui) { $('#id_contratto').val(ui.item.id); } });

  Read the article

• Chrome extensions: Content script (jQuery) in Youtube does not work properly

  - by Fabian

  I have this: $(document).ready(function() { $("button.yt-uix-expander-arrow").attr("id", "yt-uix-expander-arrow"); $("#yt-uix-expander-arrow").mouseover(function() { alert("Hello"); }); }); injected into Youtube. Using right click inspect element, the <button class="yt-uix-expander-arrow"> has a id="yt-uix-expander-arrow" attribute successfully added to it. However the mouseover event does not trigger. However if I were to change $("#yt-uix-expander-arrow").mouseover() to $(".yt-uix-expander-arrow").mouseover() it works. That's very unusual, because the #yt-uix-expander-arrow id has already been added to the button element. I tested it out on Facebook, adding a id to a class and doing a mouseover() event on the ID and it works. Any idea?

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• WPF - 'Relational' Data in XAML Using DataContext

  - by Andy T

  Hi, Say I have a list of Employee IDs from one data source and a separate data source with a list of Employees, with their ID, Surname, FirstName, etc. Is it possible in XAML only to get the Employee's name from the second data source and display it next to the ID, using something like this (with the syntax corrected)?.. <TextBlock x:Name="EmployeeID" Text="{Binding ID}"></TextBlock> <TextBlock Grid.Column="1" DataContext="{StaticResource EmployeeList[**where ID = {Binding ID}**]}" Text="{Binding Surname}"/> I'm thinking back to my days using XML and XSLT with XPath to achieve the kind of thing shown above. Is this kind of thing possible in XAML? Or do I need to 'denormalize' the data first in code, into one consolidated list? It seems like it should be possible to do this simple task using XAML only, but I can't quite get my head around how you would switch the DataContext correctly and what the syntax would be to achieve this. Is it possible, or am I barking up the wrong tree? Thanks, AT

  Read the article

• $.jQTouch.goTo is not a function Options

  - by Max Fraser

  I am trying to use the goTo function to rotate between images, here is my basic JS: <script type="text/javascript" charset="utf-8"> $.jQTouch(); $(function () { $('.touch').live('swipe', function (event, info) { alert('called' + info.direction); var id = $(this).parent().next().attr("id"); alert(id); $.jQTouch.goTo(id, 'slide'); }); }); </script> This works great up until I get to the $.jQTouch.goTo(id, 'slide'); line and then I get the following error: $.jQTouch.goTo is not a function How do I access this goTo function?

  Read the article

• Performance Improvement: Alternative for array_flip function.

  - by Rachel

  Is there any way I can avoid using array_flip to optimize performance. I am doing a select statement from database, preparing the query and executing it and storing data as an associative array in $resultCollection and than I have array op and for each element in $resultCollection am storing its outputId in op[] as evident from the code. I have explained code and so my question is how can I achieve an similar alternative for array_flip with using array_flip as I want to improve performance. $resultCollection = $statement->fetchAll(PDO::FETCH_ASSOC); $op = array(); //Looping through result collection and storing unicaOfferId into op array. foreach ($resultCollection as $output) { $op[] = $output['outputId']; } //Here op array has key as 0, 1, 2...and value as id {which I am interested in} //Flip op array to get unica offer ids as key $op = array_flip($op); //Doing a flip to get id as key. foreach ($ft as $Id => $Off) { $ft[$Id]['is_set'] = isset($op[$Id]); }

  Read the article

• jQuery UI Tabs - bind tabs to links on the same page

  - by Troy

  Hello, I'm trying to bind tabs to a link on the same page, but I'm a relative newby to jQuery and need some help. I have the tabs working with the code from jQuery UI site. However, how do I bind the links in the sidebar on the same page? <script> $(function() { $( "#tabs" ).tabs(); }); /script> <div class="demo"> <div id="tabs"> <ul> <li><a href="#tabs-1">Nunc tincidunt</a></li> <li><a href="#tabs-2">Proin dolor</a></li> <li><a href="#tabs-3">Aenean lacinia</a></li> </ul> <div id="tabs-1"> <p>Proin elit arcu, rutrum commodo, vehicula tempus, commodo a, risus. Curabitur nec arcu. Donec sollicitudin mi sit amet mauris. Nam elementum quam ullamcorper ante. Etiam aliquet massa et lorem. Mauris dapibus lacus auctor risus. Aenean tempor ullamcorper leo. Vivamus sed magna quis ligula eleifend adipiscing. Duis orci. Aliquam sodales tortor vitae ipsum. Aliquam nulla. Duis aliquam molestie erat. Ut et mauris vel pede varius sollicitudin. Sed ut dolor nec orci tincidunt interdum. Phasellus ipsum. Nunc tristique tempus lectus.</p> </div> <div id="tabs-2"> <p>Morbi tincidunt, dui sit amet facilisis feugiat, odio metus gravida ante, ut pharetra massa metus id nunc. Duis scelerisque molestie turpis. Sed fringilla, massa eget luctus malesuada, metus eros molestie lectus, ut tempus eros massa ut dolor. Aenean aliquet fringilla sem. Suspendisse sed ligula in ligula suscipit aliquam. Praesent in eros vestibulum mi adipiscing adipiscing. Morbi facilisis. Curabitur ornare consequat nunc. Aenean vel metus. Ut posuere viverra nulla. Aliquam erat volutpat. Pellentesque convallis. Maecenas feugiat, tellus pellentesque pretium posuere, felis lorem euismod felis, eu ornare leo nisi vel felis. Mauris consectetur tortor et purus.</p> </div> <div id="tabs-3"> <p>Mauris eleifend est et turpis. Duis id erat. Suspendisse potenti. Aliquam vulputate, pede vel vehicula accumsan, mi neque rutrum erat, eu congue orci lorem eget lorem. Vestibulum non ante. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Fusce sodales. Quisque eu urna vel enim commodo pellentesque. Praesent eu risus hendrerit ligula tempus pretium. Curabitur lorem enim, pretium nec, feugiat nec, luctus a, lacus.</p> <p>Duis cursus. Maecenas ligula eros, blandit nec, pharetra at, semper at, magna. Nullam ac lacus. Nulla facilisi. Praesent viverra justo vitae neque. Praesent blandit adipiscing velit. Suspendisse potenti. Donec mattis, pede vel pharetra blandit, magna ligula faucibus eros, id euismod lacus dolor eget odio. Nam scelerisque. Donec non libero sed nulla mattis commodo. Ut sagittis. Donec nisi lectus, feugiat porttitor, tempor ac, tempor vitae, pede. Aenean vehicula velit eu tellus interdum rutrum. Maecenas commodo. Pellentesque nec elit. Fusce in lacus. Vivamus a libero vitae lectus hendrerit hendrerit.</p> </div> </div> </div> <div id="sidebar"> <a href="#tab-1" id="tab-1"><img src="image1.jpg" /></a> <a href="#tab-2" id="tab-2"><img src="image2.jpg" /></a> </div>

  Read the article

• jQuery addClass to a tag problem

  - by lander

  I have this in my html code: <ul id="navlist" <li id="tabItem1"><a href="#">Item one</a></li> <li id="tabItem2"><a href="#">Item two</a></li> <li id="tabItem3"><a href="#">Item three</a></li> <li id="tabItem4"><a href="#">Item four</a></li> </ul> I want to add a class to the a element with jquery like this: (its not working) var currentTab = 1; $(document).ready(function() { $("li#tabItem" + currentTab + ":has(a)").addClass("navlistHover"); //console.log("li#tabItem" + currentTab + ":has(a)"); }); When a delete the a element and do it like the next example, than there is no problem. $("li#tabItem" + currentTab).addClass("navlistHover");

  Read the article

• do while is breaking. How to skip rows PHP

  - by Victor

  Hello all. I have a question probably lame but it made me stuck I have the a db query $query_Recordset10 = "SELECT * FROM products WHERE razdel='mix' AND ID='$ID+1' AND litraj='$litri' ORDER BY ID ASC"; $Recordset10 = mysql_query($query_Recordset10, $victor) or die(mysql_error()); $row_Recordset10 = mysql_fetch_array($Recordset10); $totalRows_Recordset10 = mysql_num_rows($Recordset10); I have do while loop in my page and the idea i to show products matching this criteria. But if the next product is 2 or more ID's ahead my cycle breaks. So is there a way for skipping this row and get the next ID matching the criteria. Thank you very much.

  Read the article

• Avoiding improper std::string initialization with NULL const char* using g++

  - by pachanga

  A there any g++ options which can detect improper initialization of std::string with NULL const char*? I was in the process of turning some int fields into std::string ones, i.e: struct Foo { int id; Foo() : id(0) {} }; ...turned into: struct Foo { std::string id; Foo() : id(0) {} //oooops! }; I completely overlooked bad 'id' initialization with 0 and g++ gave me no warnings at all. This error was detected in the run time(std::string constructor threw an exception) but I'd really like to detect such stuff in the compile time. Is there any way?

  Read the article

• Cascading updates with business key equality: Hibernate best practices?

  - by Traphicone

  I'm new to Hibernate, and while there are literally tons of examples to look at, there seems to be so much flexibility here that it's sometimes very hard to narrow all the options down the best way of doing things. I've been working on a project for a little while now, and despite reading through a lot of books, articles, and forums, I'm still left with a bit of a head scratcher. Any veteran advice would be very appreciated. So, I have a model involving two classes with a one-to-many relationship from parent to child. Each class has a surrogate primary key and a uniquely constrained composite business key. <class name="Container"> <id name="id" type="java.lang.Long"> <generator class="identity"/> </id> <properties name="containerBusinessKey" unique="true" update="false"> <property name="name" not-null="true"/> <property name="owner" not-null="true"/> </properties> <set name="items" inverse="true" cascade="all-delete-orphan"> <key column="container" not-null="true"/> <one-to-many class="Item"/> </set> </class> <class name="Item"> <id name="id" type="java.lang.Long"> <generator class="identity"/> </id> <properties name="itemBusinessKey" unique="true" update="false"> <property name="type" not-null="true"/> <property name="color" not-null="true"/> </properties> <many-to-one name="container" not-null="true" update="false" class="Container"/> </class> The beans behind these mappings are as boring as you can possibly imagine--nothing fancy going on. With that in mind, consider the following code: Container c = new Container("Things", "Me"); c.addItem(new Item("String", "Blue")); c.addItem(new Item("Wax", "Red")); Transaction t = session.beginTransaction(); session.saveOrUpdate(c); t.commit(); Everything works fine the first time, and both the Container and its Items are persisted. If the above code block is executed again, however, Hibernate throws a ConstraintViolationException--duplicate values for the "name" and "owner" columns. Because the new Container instance has a null identifier, Hibernate assumes it is an unsaved transient instance. This is expected but not desired. Since the persistent and transient Container objects have the same business key values, what we really want is to issue an update. It is easy enough to convince Hibernate that our new Container instance is the same as our old one. With a quick query we can get the identifier of the Container we'd like to update, and set our transient object's identifier to match. Container c = new Container("Things", "Me"); c.addItem(new Item("String", "Blue")); c.addItem(new Item("Wax", "Red")); Query query = session.createSQLQuery("SELECT id FROM Container" + "WHERE name = ? AND owner = ?"); query.setString(0, c.getName()); query.setString(1, c.getOwner()); BigInteger id = (BigInteger)query.uniqueResult(); if (id != null) { c.setId(id.longValue()); } Transaction t = session.beginTransaction(); session.saveOrUpdate(c); t.commit(); This almost satisfies Hibernate, but because the one-to-many relationship from Container to Item cascades, the same ConstraintViolationException is also thrown for the child Item objects. My question is: what is the best practice in this situation? It is highly recommended to use surrogate primary keys, and it is also recommended to use business key equality. When you put these two recommendations in to practice together, however, two of the greatest conveniences of Hibernate--saveOrUpdate and cascading operations--seem to be rendered almost completely useless. As I see it, I have only two options: Manually fetch and set the identifier for each object in the mapping. This clearly works, but for even a moderately sized schema this is a lot of extra work which it seems Hibernate could easily be doing. Write a custom interceptor to fetch and set object identifiers on each operation. This looks cleaner than the first option but is rather heavy-handed, and it seems wrong to me that you should be expected to write a plug-in which overrides Hibernate's default behavior for a mapping which follows the recommended design. Is there a better way? Am I making completely the wrong assumptions? I'm hoping that I'm just missing something. Thanks.

  Read the article

• bi-directional o2m/m2o beats uni-directional o2m in SQL efficiency?

  - by Henry

  Use these 2 persistent CFCs for example: // Cat.cfc component persistent="true" { property name="id" fieldtype="id" generator="native"; property name="name"; } // Owner.cfc component persistent="true" { property name="id" fieldtype="id" generator="native"; property name="cats" type="array" fieldtype="one-to-many" cfc="cat" cascade="all"; } When one-to-many (unidirectional) Note: inverse=true on unidirectional will yield undesired result: insert into cat (name) values (?) insert into Owner default values update cat set Owner_id=? where id=? When one-to-many/many-to-one (bi-directional, inverse=true on Owner.cats): insert into Owner default values insert into cat (name, ownerId) values (?, ?) Does that mean setting up bi-directional o2m/m2o relationship is preferred 'cause the SQL for inserting the entities is more efficient?

  Read the article

• Making your ASP.NET/HTML Websites Indic aware &ndash; accepting Tamil, Telugu, Kannada, Hindi and ot

  - by Harish Ranganathan

  Its been a month since I wrote my last post.  Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010.  Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts  so that the Indic input feature can be encapsulated into your own websites.  For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc.,  All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field.  When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English.  You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input.  Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required.  The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” .  When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”.   You can copy paste this into any of your web pages to check it <form id="form1" runat="server">     <!-- Microsoft Indic Language Input Tool embed code --> <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script>     <div>     <h2>         Welcome to the Registration Page     </h2>     <p>         First Name: <asp:TextBox runat="server" ID="txtFirstName" />         <br />         <br />         Last Name: <asp:TextBox runat="server" ID="txtLastName" />         <br />         <br />         Password:         <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" />         <br />         <br />         Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" />         <br />         <br />         English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" />     </p>     <p>         <!-- Microsoft Indic Language Input Tool attribution image link --> <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a>     </p>     </div>     </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input.   Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature.  It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image.  You can see the screen shot below where I have typed it in Tamil.  In that you will notice that the password field behaves as expected and the last field accepts English Text.  You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text.   This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc.,   The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized.  This is transliterated.  You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files.  In the resource files, you can enter the text in different languages to make this a truly localized page.  If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/  In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >