Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 246/328 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• How to improve network performance between two Win 2008 KMV guest having virtio driver already?

  - by taazaa

  I have two physical servers with Ubuntu 10.04 server on them. They are connected with a 1Gbps card over a gigabit switch. Each of these host servers has one Win 2008 guest VM. Both VMs are well provisioned (4 cores, 12GB RAM), RAW disks. My asp.net/sql server applications are running much slower compared to very similar physical setups. Both machines are setup to use virtio for disk and network. I used iperf to check network performance and I get: Physical host 1 ----- Physical Host 2: 957 Mbits/sec Physical host 1 ----- Win 08 Guest 1: 557 Mbits/sec Win 08 Guest 1 ----- Phy host 1: 182 Mbits/sec Win 08 Guest 1 ----- Win 08 Guest 2: 111 Mbits /sec My app is running on Win08 Guest 1 and Guest 2 (web and db). There is a huge drop in network throughput (almost 90%) between the two guest. Further the throughput does not seem to be symmetric between host and guest as well. The CPU utilization on the guests and hosts is less than 2% right now (we are just testing right now). Apart from this, there have been random slow downs in the network to as low as 1 Mbits/sec making the whole application unusable. Any help to trouble shoot this would be appreciated.

  Read the article

• How to stop Vista from auto changing video resolution?

  - by bialix

  I have new Acer Aspire Revo R3600 computer with Vista pre-installed. The computer has NVidia video adapter. While connecting 17" LCD monitor (LG L1742S) via VGA cable it works fine, and I can change the resolution of the display from max 1920*1024 down to some other value, and after reboot the settings are restored correctly. But when I'm connecting bigger full HD 1920*1080 display (LG E2250) via VGA cable then every boot I have the same problem: I see boot progress window, then I see MS logo, then I see welcome screen then I start to see desktop and suddenly monitor switch off and show me the message about unsupported frequency of input signal As I understand Vista tries to auto-change resolution and sets wrong parameters. I've tried to boot into safe mode and into low-resolution mode, every time I have the same problem: Vista boot-up and suddenly monitor stops working. I've tried to connect this monitor to notebook with Windows XP and has no problem to work with this display on its native resolution. How can I disable this display resolution auto-changer in Vista? Or maybe there is another workaround?

  Read the article

• iptables (DNAT)

  - by user1126425

  I have a host that acts as a gateway for other hosts. The configuration is such that eth0(192.168.1.3) is connected to internet via a router and eth1(172.16.2.50) is connected to internal network via switch. Given that, this host is also running a service that is bound to eth1 and serves the internal network. I want to extend this service to the outside world as well and was trying to manipulate iptables so that any request that comes to this host via eth0 and is directed to 192.168.1.3:80 is send to 172.16.2.50 and internet users can also make use of the service. Here are my iptable rules for setting up the host as gateway (and these work fine): sudo iptables -t nat -A POSTROUTING -s 172.16.2.0/16 -o eth0 -j MASQUERADE sudo iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth1 -j MASQUERADE sudo iptables -A FORWARD -s 172.16.2.0/16 -o eth0 -j ACCEPT sudo iptables -A FORWARD -d 172.16.2.0/16 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT And these are the rules that I am trying to add to the iptables to achieve my ends: sudo iptables -A INPUT -d 192.168.1.3 -p tcp -dport 80 -i eth0 -j ACCEPT sudo iptables -t nat -A PREROUTING -d 192.168.1.3 -p tcp -dport 80 -j DNAT --to-destination 172.16.2.50:80 sudo iptables -t nat -A PREROUTING -s 172.16.2.50 -p tcp -sport 80 -j SNAT --to-source 192.168.1.3:80 sudo iptables -A FORWARD -d 192.168.1.3 -p tcp -dport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT When I do so, I get error like : "multiple -d flags not allowed" ... Can someone tell me how to resolve this error... and do the entries that I want to add will serve my purpose ? Thanks!

  Read the article

• How does everyone set up AWS for PHP with a git workflow while worrying about distributing EC2?

  - by Parris

  Hello, I have been looking for something like heroku but for php, and after much frustration (and almost finding what I need, but not quite) we decided to just go with AWS without any other abstraction. We are using PHP 5.3 (and CakePHP 1.3), and are currently using git. Ubuntu seems like the easiest way to get both of those on there and we will most likely use that. We aren't really going worry about outgoing email. We are using smtp through gmail, but will most likely switch to some other service eventually. I had 3 questions: 1) I have been looking at Zend Server, and I am not quite sure how that is more beneficial than xampp. Perhaps it is not? 2) I suppose to make the application scale we would need multiple instances of some ec2 ami. Then just duplicate it and such. The question then becomes how do we make sure all EC2 instances are up to date? 3) I understand the concept of load balancing to some degree. I understand that in 1 region you select a bunch of servers and have it load balance across them. The question then becomes well how about world wide? How do I make it so that traffic is directed to the correct ec2 server? I have heard of route 53, and tried signing up for that, but nothing appears in my control panel. Also perhaps it is just a DNS thing with my domain registrar? AHHH... some tutorial would be helpful!

  Read the article

• 4GB Memory Upgrade for Acer Aspire 5102WLMi

  - by Richard Slater

  I have bought a 4GB memory upgrade (2x 2GB PC2-5300 SODIMM) for my Acer Aspire 5102WLMi (Aspire 5100 Series) laptop, I installed the two memory modules correctly however with 4GB installed the laptop refuses to POST. I have tried the following: Tried both 2GB SODIMMs without the other (Worked Fine) Tried the original 512MB SODIMMs (Worked Fine) Tried with original 512MB SODIMM and new 2GB SODIMM (Worked Fine) Tried swapping over the 2GB SODIMs (Didn't Boot) Left the computer for 10 minutes with both 2GB SODIMMs installed (Didn't Boot) Checked latest BIOS installed (No Change) The Crucial website said that the laptop supported 4GB of RAM as do several other sites through found through Google, up until now I was fairly confident this would work. Couple of questions that would be good to have answered: Question: Has anyone got an Acer Aspire 5100 Series running with 4GB RAM? Answer: Yes, I have now got one working with 3.75GB Usable, the rest is occupied utilized by the Graphics Card. Question: Any tips on getting this to work; is there a CMOS reset switch? Answer: Yes there is, if both SODIMMs are removed two very small interlocking PCB tracks are revealed. If these are shorted together with a screwdriver the BIOS will be reset. Thanks.

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• Advice on cloning disk

  - by hks

  I'm going to buy a second disk for backup, the same size as my laptops. I want to mount it in a casing via usb and backup an entire hdd every soemtime. That's because I want the posibility to just switch drives in case of something goes wrong. I'm using Linux and obviously the right tool seems to be dd. The thing is that my laptop drive has a speed of around 50-70 MB/s and usb 2.0 is 57 MB/s. So to copy my 250GB disk should take me more than 1 hour if I'm lucky. I can't wait this much. I want some differential backup. I read one of JWZ articles. In it he gives more details for using rsync on Mac. He writes that there is possibility of making rsync'ed disk bootable. So my question is: how to make rsync'ed hdd bootable under Linux or are there other 'quick backup' tools for Linux that would allow me to just swap drives? Or should I just stick to dd :( ?

  Read the article

• Shortcuts that make using Windows easier? [closed]

  - by ekaj

  Over the years I have found out a good bit of shortcuts, all of which make using Windows that much faster and easier. I was wondering if I had missed any important ones, or ones that just saved any time. I tried to keep these relative to Windows only, as programs such as Mozilla, Photoshop, etc. bring in hundreds of other shortcuts, which do not apply to all users. These are the current ones I know: For the mouse: Scroll wheel - opens a link in IE into a new tab - closes a specific tab in IE when closed on Right click-n-drag - nifty menu to make a copy of a file or create a shortcut For the keyboard: Cntrl + Alt + Del - need this be explained? WinKey + R - opens 'Run..' WinKey + D - shows the desktop WinKey + E - opens 'My Computer' WinKey + F - opens 'Find..' WinKey + Tab - cool way to switch inbetween windows WinKey + L - locks the computer Alt + Tab - switches windows with a simple interface Alt + F4 - closes windows Alt + F - opens 'File' (Handy for things like IE if you have the menubar disabled) Cntrl + F - find text on current document Cntrl + W - closes a window, or current active tab in IE (or IE itself if only one tab) Cntrl + C - copies selected text / image Cntrl + V - pastes selected text / image So does anyone know of any more shortcuts that just make life easier? I would be much appreciative of any, and I am sure that some other users would like to know some too =]

  Read the article

• Bind9 not doing anything with forwarded query responses?

  - by Rykaro

  I have a Bind DNS server that is the local production DNS server and a Windows 2008 R2 domain controller which provides DNS for a lab environment with the domain xyz.lab. I've configured the Bind DNS to forward DNS requests for the domain xyz.lab to the Windows DNS server with this config: zone "xyz.lab" { type forward; forward only; forwarders { x.x.x.x; }; }; zone "x.x.x.in-addr.arpa" { type forward; forward only; forwarders { x.x.x.x; }; }; And Bind options are (the all_internal acl includes the subnets of both the production and lab networks as well as the loopback of the bind server): allow-query { all_internal; }; allow-recursion { all_internal; }; allow-transfer { none; }; notify no; minimal-responses yes; version "unknown"; Unfortunately, when I do an nslookup or dig on the bind server for a host on the lab domain, the request times out. The logs on the Windows 2008 DNS server show it receiving the query and responding to it and a network packet trace shows the query responses arriving at the Bind DNS server. The servers reside on the same switch with a router providing connectivity between the layer 3 subnets (production and lab are on different subnets) and there is a round trip time of between 3ms and 5ms on pings between the two servers, so I don't think there is an issue with latency causing a timeout of the query. In summary a query-response arrives back at the Bind server and the nslookup/dig times-out. Why does the Bind DNS not seem to be doing anything with the query responses when it receives them?

  Read the article

• wireless clients not getting correct dhcp addresses

  - by szeli

  I apologise first if this is a stupid problem. I'm new to Cisco networking. I need some help with an existing configuration done by my vendor. Environment: 1. Core switch - Catalyst 6509e vlans configured: a. vlan 50 (wired clients) 10.0.50.x/24 interface IP 10.0.50.20 b. vlan 70 (wireless clients) 10.0.70.x/24 interface IP 10.0.70.20 c. vlan 192 (guest clients) 192.168.1.x/24 interface IP 192.168.1.20 d. trunk port for WLC native vlan 70 allowed vlan 50, 70, 192 2. Cisco 4402 WLC interfaces a. management untagged IP 10.0.70.10 b. ap-manager untagged IP 10.0.70.11 c. service-port n/a IP 192.168.10.1 d. virtual n/a IP 1.1.1.1 e. guestwlan vlan192 IP 192.168.1.100 3. Cisco AIR-LAP1142N-S-K9 LAP01 (WLAN local, interface: management) IP 10.0.70.21/24 GW 10.0.70.20 DHCP server 10.0.50.10 (scope 10.0.70.101 to 200) LAP02 (WLAN guest, interface: guestwlan) IP 192.168.1.21/24 GW 192.168.1.20 DHCP server 192.168.1.10 (scope 192.168.1.101 to 200) here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200) can anyone please help? thanks!

  Read the article

• Identifying test machines in analytics logs

  - by RTigger

  We're just beginning to add analytics to our SaaS application, to begin (among other things) billing clients based on usage. The problem we're running into is there's a few circumstances where our support team will simulate a log in into production to try to reproduce reported issues with a client's configuration. When they log in, an entry will be made into our analytics logs that their specific account has logged in, which we use to calculate billing. A few ideas we had to solve this: 1) We log IP addresses as well as machine keys for each PC that logs in - we could filter out known IP addresses and/or machine keys belonging to support. The drawback is we have to maintain a list of keys / addresses manually. 2) If support (or anyone else internal) runs our application in debug mode (as opposed to release), it will not report analytics. This is fine, as long as support / anyone else remembers to switch to debug mode. 3) Include some sort of reg key / similar setting required to be set when configuring a production system in order to send analytics. Again, fine, as long as our infrastructure team remembers to set the reg key or setting. All of these approaches require some sort of human involvement, which we all know can be iffy at best. Has anyone run into a similar situation? Is there an automated approach to this problem? (PS Of course, we shouldn't be testing in production, but there are a few one-off instances with customer set up that we can't reproduce without logging in as them in production. This is the only time we do so, and this is the case I'm talking about in this question.)

  Read the article

• Allied Telesis router: IP filtering for the LOCAL interface

  - by syneticon-dj

  Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• What could cause a dual-monitor PC to suddenly stop using one of the screens?

  - by raldi

  I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

• Windows 8 Communication Sound Setting not working

  - by blackmastiff

  I've been having a problem on my new laptop recently which is familiar but baffling the usual fixes. I'm running Windows 8 with an onboard Realtek soundcard. It's similar to the one on my older computer running Windows 7. The problem is, when I'm in Skype or Mumble, Windows changes the sound output to lower everything else automatically. I've disabled the communications sound change option on the communications tab within sound devices and checked all the applications settings to insure that they are not responsible. They aren't, and I noticed something else. When I'm in the sound properties dialog, and I switch to the microphone tab, the same audio output reduction occurs. This seems to say to me that the microphone must be responsible in some way, but seeing as I uninstalled all the drivers and installed windows drivers instead, I'm confused as to why this would be occurring. Any thoughts? EDIT: I just tried disabling the built in microphone and the sound no longer get changed. More confused now? As soon as I turn it back on, the sound gets dropped again. Incidentally, the fix for this on windows 7 was this question: Windows 7 lowers applications' volume automatically I've got my computer set that way and it doesn't work.

  Read the article

• Configuring iPad Mail app & Gmail app with different accounts? [migrated]

  - by Steve Crane

  I prefer to use the Gmail app over the standard Mail app on my iPad for reading my personal Gmail (I delete a lot of mails, newsletters, etc., after reading and this is one tap in Gmail and several in Mail). I have them set up so my personal Gmail uses the Gmail app and my work email is set up to use the standard Mail app. This all works fine except for one problem. If I'm in Gmail or Mail and send an email it sends from the relevant email address as expected. My problem is that when I share something via email from Safari or another app it sends from the email address configured in Settings for Mail (the work one) and I would prefer to do such sharing from my personal email address. Does anyone know if there is a way to achieve this? I could switch the addresses to use the other app but as I never delete work email and delete personal mail at least 50% of the time, the behaviour of the apps is perfect the way I have them set up; if only I could solve that one little problem of controlling where shared items are sent from. I am using an iPad 2 with iOS 5.1 should that be relevant.

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• HP LaserJet 1515: Disable "refill" warning

  - by Pekka

  I have a HP LaserJet 1515 connected to a Windows 7 PC. The Magenta cartridge is empty; the printer shows a warning to that effect, and won't let me print even black-and-white documents any more. I can't turn the warning off manually using the printer's small console: When I try to enter any menu, the display says "Menu access disabled". I have no idea why. There is a setting to override the warning, but it can't be changed using the Network interface in the browser (Although it is there on the status page) According to the manual,the HP printing tool is supposed to offer a switch for this, but it won't install on my Windows 7. It just rumbles about for half an hour, to magnificently exit with an "unknown error" requiring a reboot. On second look, the problem seems to be that Windows 7 just isn't supported. There is no download link for the tool when you specify Windows 7 as your OS. I just want to print a black-and-white-document on a printer whose black cartridge is still 65% full. Is this indeed impossible? On second thought, I'm cross-posting this on the HP support forum. I'll update here if anything comes up.

  Read the article

• Screen recording in Windows 8 makes PC unusable?

  - by Skadier

  OS used: Windows 8 Pro x64 Hi there, I got a weird problem. I tried to record my screen using different screen recording applications like Camtasia7, Hypercam, and some others. So if I hit "record" everything works fine for about 3-4 seconds. Then the PC slows down heavily caused by extremly high IO usage. The PC gets nearly unusable and laggs like hell. I can't switch applications, can't get TaskManager with Ctrl+Alt+Del, or something else without waiting 1-3 Minutes. After about 5-8 Minutes and a bit of luck I am sometimes able to end the process of the recorder and IO calms down very slow(100% IO lasts for about 2 Minutes before becoming normal). I don't know why this happens. Screen recorders that support Windows 8 aren't out afaik but at least Camtasia7 worked with Windows 8 Developer Preview and Windows 8 Release Preview (only had to change record method to .avi). No slow downs or something else. Is there anyone out there who knows this problem too? Is there maybe a solution to this problem?

  Read the article

• Will the removal of NAT (with the use of IPv6) be bad for consumers? [closed]

  - by Jonathan.

  Possible Duplicate: How will IPv6 impact everyday users? (World IPv6 Day) As I understand when we have finally made the switch to IPv6 not only will NAT be unnecessary but it is incompatible with IPv6? Will that mean that ISPs will have to serve multiple IP addresses per customer? Will they provide a range of addresses for each customer or as each device connects will they get an IP address that isn't necessarily near that of the other devices in their house? But overall will this be bad for the Internet users? as surely it will allow ISPs to see exactly how many devices are being used, and so allow them to charge for the use of additional IP addresses? And then if that happens, what happens when you try to connect an extra device to your network? Will it simply not get an IP address? In my home we have about 15-20 devices connected at once, but for places where there are hundreds of devices, it seems like the perfect opportunity for ISPs to charge more? I think I may have it completely wrong, so is there somewhere where there is an explanation of who things will work when IPv6 becomes the norm?

  Read the article

• Computer Turns on Briefly then right back off again.

  - by goddamnyouryan

  So yesterday I came home from work and went to turn my computer on....it turned on for about 5 seconds then promptly turned right back off again...before I ever saw anything on the screen. I tried again, same result. After several attempts, I've found that the length at which it turns on differs. After trying multiple times in a row, it only stays on for about 3 seconds. If I let it rest for a bit it sometimes will stay on for up to a minute (though it never boots, the screen stays black the whole time). I'm not sure what is causing this issue...I built this computer a little more than 2 years ago and this is the first issue I have ever had with it. I did all the usual checks: -It's not the power switch -The capacitors on the motherboard all seem to be in working order -The PSU seems to be fine as it lights up, fan spins, and will sometimes stay on for about a minute period My hope is that the thermal paste on the cpu has degraded and just needs to be re-applied. Does that seem like a reasonable assumption? I'm going to tear the thing apart and do a minimum system build when I get home, but any heads up as to what I should be looking for would be much appreciated. Any thoughts?

  Read the article

• I have just created a subnet for a local network, connecting to a standalone server on another network, now I cannot connect to the internet

  - by Seth

  I am just learning some new aspects of servers and networking. We have a network of 5 subnets that all interconnect with each-other. In order to get two computers on the subnet that we were setting up, I changed the IP from the subnet where the standalone server is on (where they used to be set up)to the local subnet we are remotely hooking up. Likewise I also changed the gateway to coincide with the new subnet. Only problem is that since doing this, I am unable to establish a connection to the internet. I can ping the server and correspong gateway & DNS server, but cannot get connected to the internet. We do have a dumb-switch (non-programmable) connected that receives both the internet and private network inputs and distributes (or should do so) to about 5 other computers. Bottom line, I cannot currently connect to the internet, and am wondering what could be causing this.. It is likely something very obvious and pardon me being more vague than I probably should be, but I could use some help resolving this! Thanks for any help!

  Read the article

• oracle access on vmware fusion

  - by gaudi_br

  Hello, I'm running snow leopard and I'm doing some development that requires some network knowledge. I've installed vmware fusion 3.0 and I've set up a virtual machine with windows 2003 server. I need to mimic the exact configuration of another server in the network, so I really need to run the versions I'll be mentioning here. Besides, I set up two network configurations on the VM: one NAT config (so that I can have internet access) and one host-only config (because I need to use another server's mac adress and my local area network might have a problem with it) From the installation of windows 2003, I then installed oracle 10.2.0.1. During the installation I received a warning about the primary ip-address of the system being dhcp assigned, but I ignored it (maybe it was a mistake)... Now, from experience, unless the DHCP assigned address changes, I should be able to access the guest system's database from the host system, so I went to safari and tried to access the oracle em. As it turns out, because my computer is on a company network, the company's DNS doesn't know about the virtual machine, unless of course I switch to a bridged network config. However, I don't want to do that because I don't to mix up the domains. So I guess the question is, how can I define my own dns or router, or whatever it is that I need to define so that whenever I try the guest system's ip address form the host, it will use the vmnet1 or vmnet8 interface define by vmware and bypass the dns configuration of my local area network. I'd also like to know what to do incase I want to change ip addresses on the guest machine without having oracle go haywire (I've noticed a few folders on the structure which are specific for the very first IP Address)... Any help would be appreciated. Thanks in advance.

  Read the article

• How can I assign DHCP leases from a script?

  - by devicenull

  I have an environment where there is one DHCP server servicing a number of different hosts/vlans. The switches are configured to forward the DHCP requests over (via ip-helper) and include information about the port (option 82). I'd like to take that information and translate it into an actual lease for the server. I don't think it's particularly feasible for me to pregenerate a list of available leases, but I should be able to determine an address for a lease as it comes in. Is there an DHCP server that can execute a script when it receives a request? (Note: I'm looking to assign the IP from the script, not have the DHCP server assign an IP then execute the script) Edit: So, ultimately I'm trying to provide DHCP/PXE services over a large number of distinct vlans. This is so we can do OS installs via PXE booting without having to have a separate PXE vlan. I've got the switch config down no problem, and I have the DHCP server recognizing option 82. I need a way to pull DHCP assignments from another system (this other system would know what subnet to use on what vlan), but I do not want to have to pregenerate a list of vlan:DHCP range pairs.

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >